Download or read book Design and Manufacture of Plastic Components for Multifunctionality written by Vannessa Dr Goodship and published by William Andrew. This book was released on 2015-09-08 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacture of Plastic Components for Multifunctionality: Structural Composites, Injection Molding, and 3D Printing presents the latest information on how plastics manufacturers are increasingly being driven towards carbon emission reduction, lightweighting, and cost savings through process integration. These technologies have the potential to revolutionize future products with built-in functionality such as sensors, smart packaging, and damage detection technology for everything from milk bottles and salad packaging to automotive bumpers and plane fuselages. This book introduces the three core manufacturing methods for multifunctional materials, composites, injection molding, and 3D printing, all processes facing challenges for the implementation of new technology. Users will find a book that brings together both process and material advances in this area, giving process engineers, designers, and manufacturers the information they need to choose the appropriate material and process for the product they are developing. - Provides an introduction to the latest technologies in the area of multifunctionality, enabling engineers to implement new breakthroughs in their own businesses - Gives an understanding of the processes that need to be considered in both design and manufacture of future devices, while using materials from a broader palette than used in existing manufacturing processes - Includes best practice guidance and flow charts to aid in material and process selection - Covers revolutionary future products with built-in functionality such as sensors, smart packaging, and damage detection technology for everything from milk bottles and salad packaging to automotive bumpers and plane fuselages

Download or read book Handbook of Plastic Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2006-05-26 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: An outstanding and thorough presentation of the complete field of plastics processing Handbook of Plastic Processes is the only comprehensive reference covering not just one, but all major processes used to produce plastic products-helping designers and manufacturers in selecting the best process for a given product while enabling users to better understand the performance characteristics of each process. The authors, all experts in their fields, explain in clear, concise, and practical terms the advantages, uses, and limitations of each process, as well as the most modern and up-to-date technologies available in their application. Coverage includes chapters on: Injection molding Compression and transfer molding Sheet extrusion Blow molding Calendering Foam processing Reinforced plastics processing Liquid resin processing Rotational molding Thermoforming Reaction injection molding Compounding, mixing, and blending Machining and mechanical fabrication Assembly, finishing, and decorating Each chapter details a particular process, its variations, the equipment used, the range of materials utilized in the process, and its advantages and limitations. Because of its increasing impact on the industry, the editor has also added a chapter on nanotechnology in plastics processing.

Download or read book Plastics Processing Technology written by Edward A. Muccio and published by ASM International. This book was released on 1994-01-01 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a basic understanding of plastics processing technology at a level suitable for technicians, managers, buyers, quality assurance personnel, and engineers who have minimal experience with plastics. Highlights the key aspects of materials, thermodynamics, fluid technology, control, and tool/p

Download or read book Specialized Injection Molding Techniques written by Hans-Peter Heim and published by William Andrew. This book was released on 2015-11-02 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Special Injection Molding Techniques covers several techniques used to create multicomponent products, hollow areas, and hard-soft combinations that cannot be produced with standard injection molding processes. It also includes information on the processing techniques of special materials, including foaming agents, bio-based materials, and thermosets. The book describes the most industrially relevant special injection molding techniques, with a detailed focus on understanding the basics of each technique and its main mechanisms, i.e., temperature, mold filling, bonding, residual stresses, and material behavior, also providing an explanation of process routes and their variants, and discussions of the most influencing process parameters. As special molding technologies have the potential to transform plastics processing to a highly-efficient, integrated type of manufacturing, this book provides a timely survey of these technologies, putting them into context, accentuating new opportunities, and giving relevant information on processing. Provides information about the basics needed for understanding several special injection molding techniques, including flow phenomena, bonding mechanisms, and thermal behavior Covers the basics of each technique and its main mechanisms, i.e., temperature, mold filling, bonding, residual stresses, and material behavior Discusses the most relevant processing parameters for each injection molding technique Presents a variety of techniques, including gas and water assisted injection molding, multi component injection molding, hybrid injection molding, injection molding of bio-based materials, and techniques for thermoset

Download or read book Polymer Processing written by Donald G. Baird and published by John Wiley & Sons. This book was released on 2014-03-24 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamental concepts coupled with practical, step-by-step guidance With its emphasis on core principles, this text equips readers with the skills and knowledge to design the many processes needed to safely and successfully manufacture thermoplastic parts. The first half of the text sets forth the general theory and concepts underlying polymer processing, such as the viscoelastic response of polymeric fluids and diffusion and mass transfer. Next, the text explores specific practical aspects of polymer processing, including mixing, extrusion dies, and post-die processing. By addressing a broad range of design issues and methods, the authors demonstrate how to solve most common processing problems. This Second Edition of the highly acclaimed Polymer Processing has been thoroughly updated to reflect current polymer processing issues and practices. New areas of coverage include: Micro-injection molding to produce objects weighing a fraction of a gram, such as miniature gears and biomedical devices New chapter dedicated to the recycling of thermoplastics and the processing of renewable polymers Life-cycle assessment, a systematic method for determining whether recycling is appropriate and which form of recycling is optimal Rheology of polymers containing fibers Chapters feature problem sets, enabling readers to assess and reinforce their knowledge as they progress through the text. There are also special design problems throughout the text that reflect real-world polymer processing issues. A companion website features numerical subroutines as well as guidance for using MATLAB®, IMSL®, and Excel to solve the sample problems from the text. By providing both underlying theory and practical step-by-step guidance, Polymer Processing is recommended for students in chemical, mechanical, materials, and polymer engineering.

Download or read book Energy Management in Plastics Processing written by Robin Kent and published by Elsevier. This book was released on 2018-07-06 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Energy Management in Plastics Processing: Strategies, Targets, Techniques, and Tools, Third Edition, addresses energy benchmarking and site surveys, how to understand energy supplies and bills, and how to measure and manage energy usage and carbon footprinting. The book's approach highlights the need to reduce the kWh/kg of materials processed and the resulting permanent reductions in consumption and costs. Every topic is covered in a 2-page spread, providing the reader with clear actions and key tips for success. This revised third edition covers new developments in energy management, power supply considerations, automation, assembly operations, water footprinting, and transport considerations, and more. Users will find a practical workbook that not only shows how to reduce energy consumption in all the major plastics shaping processes (moulding, extrusion, forming), but also provides tactics that will benefit other locations in plants (e.g. in factory services and nonmanufacturing areas). - Enables plastics processors in their desire to institute an effective energy management system, both in processing and elsewhere in the plant - Provides a holistic perspective, shining a light on areas where energy management methods may have not been previously considered - Acts as a roadmap to help companies move towards improved sustainability and cost savings

Download or read book Plastics Materials and Processes written by Charles A. Harper and published by John Wiley & Sons. This book was released on 2003-10-10 with total page 1008 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plastics Materials and Processes: A Concise Encyclopedia is a resource for anyone with an interest in plastic materials and processes, from seasoned professionals to laypeople. Arranged in alphabetical order, it clearly explains all of the materials and processes as well as their major application areas and usages. Plastics Materials and Processes: A Concise Encyclopedia: Discusses and describes applications and practical uses of the materials and processes. Clear definitions and sufficient depth to satisfy the information seekers needs

Download or read book Plastics Technology Handbook written by Don Rosato and published by Momentum Press. This book was released on 2010-10-22 with total page 1458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive handbook provides a simplified, practical and innovative approach to understanding the design and manufacture of plastic products. It will expand the reader's understanding of plastics technology by defining and focusing on past, current, and future technical trends. Published in 2 volumes, the content is presented so that both technical and non-technical readers can understand the interrelationships of materials to processes. Different plastic products are examined and their related critical factors are shown, from meeting performance requirements in different environments, to reducing costs and targeting for zero defects. Examples used include small to large, and simple to complex shapes. Information is included on static properties (tensile, flexural), dynamic properties (creep, fatigue, impact) and physical and chemical properties. Extensive reference sources and useful data and physical and chemical constants are also provided. Volume 1 sets out the basic principles of polymers, what they are and how plastics are formulated, processed, and manufactured.

Download or read book Plastic Component Design written by Paul D. Q. Campbell and published by Industrial Press Inc.. This book was released on 1996 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for the industrial designer interested in the applications of plastics in products and industry. It explains how different plastics are processed, and it contains extensive examples of common and unusual plastic components and products with an explanation of how they are manufactured. Every year, more products are being replaced or augmented by the same product made from plastic, and this trend has resulted in much debate about the effectiveness of plastic replacements. Today's plastics can be designed to operate in all weather conditions and chemical surroundings. They can be economically produced for short run part production or readily adapted to high quantity production, and they can be cut, glued, tapped, or machined by traditional methods to suit design needs. Explains how to choose the best processing method, what fastening or joining methods can be used, and how to use the characteristics of a plastic to judge its suitability for an application. Covers all major contemporary molding processes. Discusses, in detail, important topics such as surface finish and special effects.

Download or read book Plastics Process Analysis Instrumentation and Control written by Johannes Karl Fink and published by John Wiley & Sons. This book was released on 2021-03-02 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on plastics process analysis, instrumentation for modern manufacturing in the plastics industry. Process analysis is the starting point since plastics processing is different from processing of metals, ceramics, and other materials. Plastics materials show unique behavior in terms of heat transfer, fluid flow, viscoelastic behavior, and a dependence of the previous time, temperature and shear history which determines how the material responds during processing and its end use. Many of the manufacturing processes are continuous or cyclical in nature. The systems are flow systems in which the process variables, such as time, temperature, position, melt and hydraulic pressure, must be controlled to achieve a satisfactory product which is typically specified by critical dimensions and physical properties which vary with the processing conditions. Instrumentation has to be selected so that it survives the harsh manufacturing environment of high pressures, temperatures and shear rates, and yet it has to have a fast response to measure the process dynamics. At many times the measurements have to be in a non-contact mode so as not to disturb the melt or the finished product. Plastics resins are reactive systems. The resins will degrade if the process conditions are not controlled. Analysis of the process allows one to strategize how to minimize degradation and optimize end-use properties.

Download or read book Plastic Product Material and Process Selection Handbook written by Dominick V Rosato and published by Elsevier. This book was released on 2004-08-04 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is for people involved in working with plastic material and plastic fabricating processes. The information and data in this book are provided as a comparative guide to help in understanding the performance of plastics and in making the decisions that must be made when developing a logical approach to fabricating plastic products to meet performance requirements at the lowest costs. It is formatted to allow for easy reader access and this care has been translated into the individual chapter constructions and index. This book makes very clear the behaviour of the 35,000 different plastics with the different behaviours of the hundreds of processes. Products reviewed range from toys to medical devices, to cars, to boats, to underwater devices, containers, springs, pipes, aircraft and spacecraft. The reader's product to be designed and/or fabricated can be directly or indirectly related to plastic materials, fabricating processes and/or product design reviews in this book.*Essential for people involved in working with plastic material and plastic fabricating processes *Will help readers understand the performance of plastics *Helps readers to make decisions which meet performance requirements and to keep costs low

Download or read book Brydson s Plastics Materials written by Marianne Gilbert and published by William Andrew. This book was released on 2016-09-27 with total page 894 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brydson's Plastics Materials, Eighth Edition, provides a comprehensive overview of the commercially available plastics materials that bridge the gap between theory and practice. The book enables scientists to understand the commercial implications of their work and provides engineers with essential theory. Since the previous edition, many developments have taken place in plastics materials, such as the growth in the commercial use of sustainable bioplastics, so this book brings the user fully up-to-date with the latest materials, references, units, and figures that have all been thoroughly updated. The book remains the authoritiative resource for engineers, suppliers, researchers, materials scientists, and academics in the field of polymers, including current best practice, processing, and material selection information and health and safety guidance, along with discussions of sustainability and the commercial importance of various plastics and additives, including nanofillers and graphene as property modifiers. With a 50 year history as the principal reference in the field of plastics material, and fully updated by an expert team of polymer scientists and engineers, this book is essential reading for researchers and practitioners in this field. - Presents a one-stop-shop for easily accessible information on plastics materials, now updated to include the latest biopolymers, high temperature engineering plastics, thermoplastic elastomers, and more - Includes thoroughly revised and reorganised material as contributed by an expert team who make the book relevant to all plastics engineers, materials scientists, and students of polymers - Includes the latest guidance on health, safety, and sustainability, including materials safety data sheets, local regulations, and a discussion of recycling issues

Download or read book Plastics Processing Data Handbook written by D.V. Rosato and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book provides guidelines for maximizing plastics proc essing efficiency in the manufacture of all types of products, using all types of plastics. A practical approach is employed to present fundamental, yet comprehensive, coverage of processing concepts. The information and data presented by the many tables and figures interrelate the different variables that affect injection molding, extrusion, blow molding, thermoforming, compression molding, reinforced plastics molding, rotational molding, re action injection molding, coining, casting, and other processes. The text presents a great number of problems pertaining to different phases of processing. Solutions are provided that will meet product per formance requirements at the lowest cost. Many of the processing variables and their behaviors in the different processes are the same, as they all in volve basic conditions of temperature, time, and pressure. The book begins with information applicable to all processes, on topics such as melt soft ening flow and controls; all processes fit into an overall scheme that re quires the interaction and proper control of systems. Individual processes are reviewed to show the effects of changing different variables to meet the goal of zero defects. The content is arranged to provide a natural progres sion from simple to complex situations, which range from control of a sin gle manual machine to simulation of sophisticated computerized processes that interface with many different processing functions.

Download or read book Modern Technology of Plastic Polymer Processing Industries written by NIIR Board and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2003-06-04 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Indian plastic and polymer industry has taken great strides. In the last few decades, the industry has grown to the status of a leading sector in the country with a sizable base. The material is gaining notable importance in different spheres of activity and the per capita consumption is increasing at a fast pace. Continuous advancements and developments in polymer technology, processing machineries, expertise and cost effective manufacturing is fast replacing the typical materials in different segments with plastics. Plastics play a very important role in our daily lives. Throughout the world the demand for plastic, particularly plastic packaging, continues to rapidly grow. Polymer processing industry deals with the manufacture and production of polymer and synthetic substances for example acrylic plastics: poly (methyl methacrylate), poly vinyl chloride (PVC), polyamides, polyesters, cellulose plastics etc. Plastic is incredibly versatile and can be made from different ingredients, moulded into any shape, and put to a huge range of uses across industry and the rest of society. Polymer Energy system is an award winning, innovative, proprietary process to convert waste plastics into renewable energy. Polymers are the most rapidly growing sector of the materials industry. No wonder polymers are found in everything from compact discs to high tech aerospace applications. On the basis of value added, Indian share of plastic products industry is about 0.5% of national GDP. This book majorly deals with properties and applications of engineering, the strength of thermoplastic composites, and the application of thermoplastic structural composites, applications of differential scanning, calorimetry and polymer characterization, polymer degradation and stabilization, advances in photo degradation and stabilization of polyurethanes and so on. This book also consists of raw material suppliers for plastic and plastic products, manufacturers of plastic processing machinery, plastics processing machinery and equipment (foreign), machinery and equipment for plastic converting, extruders and extrusion lines, injection moulding machines and so on. This book offers, in standardized and readily accessible information on the synthesis, structure, properties and applications of the most important polymeric materials. It has been designed as a text giving a balanced coverage of the science and technology of polymers finding major applications plastics. This book is very useful for industrialists, consultants, research scholars and institutes. TAGS best small and cottage scale industries, Business consultancy, Business consultant, Copolymerization And Techniques Of Polymerization, Establish Plastic Product Making Plant, future of plastic industry in India, Get started in small-scale food manufacturing, Growth Polymerization, How Plastics Are Made, How to Start a plastic business?, How to Start a Plastic Manufacturing Business, how to start a plastic manufacturing business in India, How to Start a plastic Production Business, How to start a successful plastic business, how to start plastic industry, How to Start Plastic Manufacturing Industry (Plastics and Polymer Processing Industries), How to Start plastic Processing Industry in India, Indian plastics industry, modern small and cottage scale industries, Most Profitable plastic Processing Business Ideas, new small scale ideas in plastic processing industry, NPCS, Opportunity in the Indian Plastic Industry, plastic and polymer industry, plastic Based Small Scale Industries Projects, plastic business ideas, plastic business opportunities, plastic Business, plastic factory project plan, plastic factory setup, plastic industry in India, plastic industry process, plastic Making Small Business Manufacturing, Plastic Manufacturing Industry, plastic Processing & plastic Based Profitable Projects, plastic Processing Industry in India, plastic Processing Projects, Plastics & Polymers Technology Books, Plastics industry Plastics: Materials And Processing Technology, Polymer Characteristics, Polymer Degradation and Stabilization, Preparation of Project Profiles, Process technology books, Profitable Plastic Product Manufacturing Business, Profitable plastic Small Scale Manufacturing, profitable small and cottage scale industries, Project identification and selection, Properties and Applications of Thermoplastic, Setting up and opening your plastic Business, Small scale Commercial plastic making, small scale plastic production line, Starting a Plastic Manufacturing Plant: Startup Business, Starting a plastic Processing Business, Thermogravimetry, Thermoplastic Composites, Thermoplastic Structural

Download or read book Integrative Production Technology for High Wage Countries written by Christian Brecher and published by Springer Science & Business Media. This book was released on 2011-12-17 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial production in high-wage countries like Germany is still at risk. Yet, there are many counter-examples in which producing companies dominate their competitors by not only compensating for their specific disadvantages in terms of factor costs (e.g. wages, energy, duties and taxes) but rather by minimising waste using synchronising integrativity as well as by obtaining superior adaptivity on alternating conditions. In order to respond to the issue of economic sustainability of industrial production in high-wage countries, the leading production engineering and material research scientists of RWTH Aachen University together with renowned companies have established the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”. This compendium comprises the cluster’s scientific results as well as a selection of business and technology cases, in which these results have been successfully implemented into industrial practice in close cooperation with more than 30 companies of the industrial production sector.

Download or read book Unit Manufacturing Processes written by National Research Council and published by National Academies Press. This book was released on 1995-01-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing, reduced to its simplest form, involves the sequencing of product forms through a number of different processes. Each individual step, known as an unit manufacturing process, can be viewed as the fundamental building block of a nation's manufacturing capability. A committee of the National Research Council has prepared a report to help define national priorities for research in unit processes. It contains an organizing framework for unit process families, criteria for determining the criticality of a process or manufacturing technology, examples of research opportunities, and a prioritized list of enabling technologies that can lead to the manufacture of products of superior quality at competitive costs. The study was performed under the sponsorship of the National Science Foundation and the Defense Department's Manufacturing Technology Program.

Download or read book Handbook of Troubleshooting Plastics Processes written by John R. Wagner, Jr. and published by John Wiley & Sons. This book was released on 2012-09-19 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook provides a framework for understanding how to characterize plastic manufacturing processes for use in troubleshooting problems. The 21 chapters are authored by well-known and experienced engineers who have specialized knowledge about the processes covered in this practical guide. From the Preface: “In every chapter, the process is described and the most common problems are discussed along with the root causes and potential technical solutions. Numerous case studies are provided that illustrate the troubleshooting process. Mark A. Spalding, The Dow Chemical Company