Download or read book Plastic Mechanics of Geomaterial written by Yuanxue Liu and published by Springer. This book was released on 2019-01-07 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basic theories of Plastic Mechanics of Geomaterial, including the static and dynamic mechanical properties, nonlinear and classical plastic theory, yield surface theory, hardening model, flow rule and loading–unloading criterion, the calculation theory of principal stress axe rotation, and limit analysis of geomaterial and the latest advances in FEM limit analysis. It also set forth the typical static and dynamic constitutive model of geomaterial in detail. Broadening our understanding of the basic mechanical properties and constitutive model for geomaterial, the book helps readers to establish and select the most appropriate constitutive model according to the specific engineering problems and geomaterial characteristics. This book is a valuable resource for designers and researchers in fields related to geotechnical engineering, and it can also be used as a textbook for graduate courses.
Download or read book Visco Plastic Behaviour of Geomaterials written by N.D. Cristescu and published by Springer. This book was released on 2014-05-04 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aim of this book is to present to researchers and engineers a description of the present knowledge on the viscoplasticity of geomaterials, considering the experimental and theoretical aspects and the applications to relevant problems. First, the laboratory tests performed in order to quantitatively assess the theological properties of rocks are illustrated, describing the equipments used in modern rock mechanics laboratories and the proper testing procedures. Part of the presentation is devoted to the description of constitutive creep laws having different degrees of accuracy and complexity. The book covers also problems related to the application of numerical solution procedures to rock/soil mechanics situations in which the slow deformation of geomaterials is to be taken into account.
Download or read book Fundamentals of Plasticity in Geomechanics written by S. Pietruszczak and published by CRC Press. This book was released on 2010-09-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book presents a concise, yet reasonably comprehensive, overview of fundamental notions of plasticity in relation to geomechanics. The primary objective of this work is to provide the reader with a general background in soil/rock plasticity and, as such, should be perceived as an introduction to the broad area of inelastic response of geomaterials. The book is divided into eight chapters. Chapters 1 & 2 start with an outline of the basic concepts and fundamental postulates, followed by a review of the elastic-perfectly plastic formulations in geomechanics. The isotropic strain-hardening framework and isotropic-kinematic hardening rules, the latter formulated within the context of bounding surface plasticity, are discussed in Chapters 3 & 4. Chapter 5 outlines the basic techniques for numerical integration, whereas Chapter 6 gives an overview of procedures for limit analysis that include applications of lower and upper bound theorems. Both these chapters are introductory in nature and are intended to provide a basic background in the respective areas. Chapter 7 deals with description of inherent anisotropy in geomaterials. Finally, Chapter 8 provides an overview of the experimental response of geomaterials. The text is intended primarily for Ph.D./M.Sc. students as well as researchers working in the areas of soil/rock mechanics. It may also be of interest to practicing engineers familiar with established notions of contemporary continuum mechanics.
Download or read book Mechanics of Geomaterial Interfaces written by A.P.S. Selvadurai and published by Elsevier. This book was released on 1995-01-30 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: The subject of geomaterial interfaces recognizes the important influences of the interface behaviour on the performance of interfaces involving cementaceous materials such as concrete and steel, ice-structure interfaces, concrete-rock interfaces and interfaces encountered in soil reinforcement. During the past two decades, the subject of geomaterial interfaces has attracted the concerted attention of scientists and engineers both in geomechanics and applied mechanics. These efforts have been largely due to the observation that the conventional idealizations of the behaviour of interfaces between materials by frictionless contact, bonded contact, Coulomb friction or finite friction tend to omit many interesting and important influences of special relevance to geomaterials. The significant manner in which non-linear effects, dilatancy, contact degradation, hardening and softening, etc., can influence the behaviour of the interface is borne out by experimental evidence. As a result, in many instances, the response of the interface can be the governing criterion in the performance of a geomechanics problem. The primary objective of this volume is to provide a documentation of recent advances in the area of geomaterial interfaces. The volume consists of subject groupings which cover ice-structure, soil-structure and steel-concrete interfaces, mechanics of rock and concrete joints and interfaces in discrete systems.
Download or read book Plasticity Theory written by Jacob Lubliner and published by Courier Corporation. This book was released on 2013-04-22 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of Plasticity Theory is to provide a comprehensive introduction to the contemporary state of knowledge in basic plasticity theory and to its applications. It treats several areas not commonly found between the covers of a single book: the physics of plasticity, constitutive theory, dynamic plasticity, large-deformation plasticity, and numerical methods, in addition to a representative survey of problems treated by classical methods, such as elastic-plastic problems, plane plastic flow, and limit analysis; the problem discussed come from areas of interest to mechanical, structural, and geotechnical engineers, metallurgists and others. The necessary mathematics and basic mechanics and thermodynamics are covered in an introductory chapter, making the book a self-contained text suitable for advanced undergraduates and graduate students, as well as a reference for practitioners of solid mechanics.
Download or read book Theory of Plasticity written by Jagabanduhu Chakrabarty and published by Elsevier. This book was released on 2012-12-02 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity is concerned with the mechanics of materials deformed beyond their elastic limit. A strong knowledge of plasticity is essential for engineers dealing with a wide range of engineering problems, such as those encountered in the forming of metals, the design of pressure vessels, the mechanics of impact, civil and structural engineering, as well as the understanding of fatigue and the economical design of structures. Theory of Plasticity is the most comprehensive reference on the subject as well as the most up to date -- no other significant Plasticity reference has been published recently, making this of great interest to academics and professionals. This new edition presents extensive new material on the use of computational methods, plus coverage of important developments in cyclic plasticity and soil plasticity. A complete plasticity reference for graduate students, researchers and practicing engineers; no other book offers such an up to date or comprehensive reference on this key continuum mechanics subject Updates with new material on computational analysis and applications, new end of chapter exercises Plasticity is a key subject in all mechanical engineering disciplines, as well as in manufacturing engineering and civil engineering. Chakrabarty is one of the subject's leading figures.
Download or read book Elastoplasticity Theory written by Vlado A. Lubarda and published by CRC Press. This book was released on 2001-07-16 with total page 665 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the elastoplastic deformation of metals and geomaterials, including the constitutive description of the materials and analysis of structure undergoing plastic deformation, is an essential part of the background required by mechanical, civil, and geotechnical engineers as well as materials scientists. However, most books address the su
Download or read book Applied Stress Analysis of Plastics written by S.I. Krishnamachari and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a product of the understanding I developed of stress analysis applied to plastics, while at work at L. J. Broutman and Associates (UBA) and as a lecturer in the seminars on this topic co-sponsored by UBA and Society of Plastics Engineers. I believe that by its extent and level of treatment, this book would serve as an easy-to-read desktop reference for professionals, as well as a text book at the junior or senior level in undergraduate programs. The main theme of this book is what to do with computed stress. To approach the theme effectively, I have taken the "stress category ap proach" to stress analysis. Such an approach is being successfully used in the nuclear power field. In plastics, this approach helps in the prediction of long term behavior of structures. To maintain interest I have limited derivations and proofs to a minimum, and provided them, if at all, as flow charts. In this way, I believe that one can see better the connection between the variables, assumptions, and mathematics.
Download or read book Plasticity and Geomechanics written by R. O. Davis and published by Cambridge University Press. This book was released on 2005-08-22 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity theory is widely used to describe the behaviour of soil and rock in many engineering situations. Plasticity and Geomechanics presents a concise introduction to the general subject of plasticity with a particular emphasis on applications in geomechanics. Derived from the authors' own lecture notes, this book is written with students firmly in mind. Excessive use of mathematical methods is avoided in the main body of the text and, where possible, physical interpretations are given for important concepts. In this way the authors present a clear introduction to the complex ideas and concepts of plasticity as well as demonstrating how this developing subject is of critical importance to geomechanics and geotechnical engineering. This book therefore complements Elasticity and Geomechanics by the same authors and will appeal to graduate students and researchers in the fields of soil mechanics, foundation engineering, and geomechanics.
Download or read book Deformation Characteristics of Geomaterials written by V.A. Rinaldi and published by IOS Press. This book was released on 2015-12-11 with total page 1236 pages. Available in PDF, EPUB and Kindle. Book excerpt: In November 2015, Buenos Aires, Argentina became the location of several important events for geo-professionals, with the simultaneous holding of the 6th International Symposium on Deformation Characteristics of Geomaterials, the 15th Pan-American Conference on Soil Mechanics and Geotechnical Engineering (XV PCSMGE), the 8th South American Congress on Rock Mechanics (SCRM), as well as the 22nd Argentinean Congress of Geotechnical Engineering (CAMSIGXXII). This synergy provided a unique opportunity to exchange ideas and discuss current and future practices in the areas of soil mechanics and rock mechanics, and their applications in civil, energy, environmental, and mining engineering. This book presents the proceedings of the 6th International Symposium on Deformation Characteristics of Geomaterials. As well as 118 articles selected for publication after peer review, it includes 7 lectures delivered by invited keynote speakers and the Third Bishop Lecture, delivered by Professor Herve Di Benedetto of the University of Lyon, France, who presented a reference work on the advanced testing and modeling of bituminous bounded and unbounded granular materials. The conference brought together practitioners, researchers and educators from around the world engaged in the understanding of the deformation properties of geo-materials before failure, and the small strain parameters as fundamental characteristics of geo-materials. The main topics covered by the symposium include experimental investigations from very small strains to beyond failure, including multi-physical approach; HTC M coupling behavior, characterization and modeling of various geo-materials and interfaces; and practical prediction and interpretation of ground responses: field observation and case histories.
Download or read book Plasticity for Engineers written by C. R. Calladine and published by . This book was released on 1985 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Microporomechanics written by Luc Dormieux and published by John Wiley & Sons. This book was released on 2006-08-14 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended as a first introduction to the micromechanics of porous media, this book entitled “Microporomechanics” deals with the mechanics and physics of multiphase porous materials at nano and micro scales. It is composed of a logical and didactic build up from fundamental concepts to state-of-the-art theories. It features four parts: following a brief introduction to the mathematical rules for upscaling operations, the first part deals with the homogenization of transport properties of porous media within the context of asymptotic expansion techniques. The second part deals with linear microporomechanics, and introduces linear mean-field theories based on the concept of a representative elementary volume for the homogenization of poroelastic properties of porous materials. The third part is devoted to Eshelby’s problem of ellipsoidal inclusions, on which much of the micromechanics techniques are based, and illustrates its application to linear diffusion and microporoelasticity. Finally, the fourth part extends the analysis to microporo-in-elasticity, that is the nonlinear homogenization of a large range of frequently encountered porous material behaviors, namely, strength homogenization, nonsaturated microporomechanics, microporoplasticity and microporofracture and microporodamage theory.
Download or read book Mechanics of Unsaturated Geomaterials written by Lyesse Laloui and published by John Wiley & Sons. This book was released on 2013-03-04 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a sound basis in the challenging area of the mechanics of unsaturated geomaterials. The objective is to supply the reader with an exhaustive overview starting from the basics and covering the most recent theories and applications (i.e. natural disasters, nuclear waste disposal, oil and agriculture productions). The presentation of the fundamental concepts is based on an interdisciplinary approach, in the areas of soil, rock and cement-based material mechanics.
Download or read book Plasticity and Geotechnics written by Hai-Sui Yu and published by Springer. This book was released on 2010-12-16 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity and Geotechnics is the first attempt to summarize and present in a single volume the major achievements in the field of plasticity theory for geotechnical materials and its applications to geotechnical analysis and design. The book emerges from the author’s belief that there is an urgent need for the geotechnical and solid mechanics community to have a unified presentation of plasticity theory and its application to geotechnical engineering.
Download or read book Pre failure Deformation Behaviour of Geomaterials written by R. J. Jardine and published by Thomas Telford. This book was released on 1998 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past fifteen years experimental and theoretical characterisation of the pre-failure deformation properties of geomaterials has developed enormously. In recognition of these important research developments a Geotechnique Symposium in Print (SIP) was held at the Institution of Civil Engineers in 1997. This volume brings together the nineteen Geotechnique SIP papers which summarise the recent developments in measuring and understanding the pre-failure stress-strain-time properties of natural soils, and apply this information to practical engineering problems.
Download or read book Mechanics of Materials and Interfaces written by Chandrakant S. Desai and published by CRC Press. This book was released on 2000-12-20 with total page 711 pages. Available in PDF, EPUB and Kindle. Book excerpt: The disturbed state concept (DSC) is a unified, constitutive modelling approach for engineering materials that allows for elastic, plastic, and creep strains, microcracking and fracturing, stiffening or healing, all within a single, hierarchical framework. Its capabilities go well beyond other available material models yet lead to significant simpl
Download or read book Numerical Methods and Implementation in Geotechnical Engineering Part 1 written by Y.M. Cheng and published by Bentham Science Publishers. This book was released on 2020-04-01 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Methods and Implementation in Geotechnical Engineering explains several numerical methods that are used in geotechnical engineering. The first part of this reference set includes methods such as the finite element method, distinct element method, discontinuous deformation analysis, numerical manifold method, smoothed particle hydrodynamics method, material point method, plasticity method, limit equilibrium and limit analysis, plasticity, slope stability and foundation engineering, optimization analysis and reliability analysis. The authors have also presented different computer programs associated with the materials in this book which will be useful to students learning how to apply the models explained in the text into practical situations when designing structures in locations with specific soil and rock settings. This reference book set is a suitable textbook primer for civil engineering students as it provides a basic introduction to different numerical methods (classical and modern) in comprehensive readable volumes.
