Download or read book Plastic Deformation of MoSi inferior Two Single Crystals and Polycrystalline Mo Si Al inferior Two written by Chengge Jiao and published by . This book was released on 2000 with total page 137 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastic Deformation of MoSi2 Single Crystals and Polycrystalline Mo Si Al 2 written by Chengge Jiao and published by . This book was released on 2000 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plastic deformation of MoSi single crystals and polycrystalline Mo Si Al written by Chengge Jiao and published by . This book was released on 2000 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Single Crystal Plasticity a Survey Pt 2 Experimental Studies of Plastic Deformation of Single Crystals written by L.E. Malvern and published by . This book was released on 1948 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Electronic Properties of Materials written by Rolf E. Hummel and published by Springer. This book was released on 2013-11-11 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is quite satisfying for an author to learn that his brainchild has been favorably accepted by students as well as by professors and thus seems to serve some useful purpose. This horizontally integrated text on the electronic properties of metals, alloys, semiconductors, insulators, ceramics, and poly meric materials has been adopted by many universities in the United States as well as abroad, probably because of the relative ease with which the material can be understood. The book has now gone through several re printing cycles (among them a few pirate prints in Asian countries). I am grateful to all readers for their acceptance and for the many encouraging comments which have been received. I have thought very carefully about possible changes for the second edition. There is, of course, always room for improvement. Thus, some rewording, deletions, and additions have been made here and there. I withstood, how ever, the temptation to expand considerably the book by adding completely new subjects. Nevertheless, a few pages on recent developments needed to be inserted. Among them are, naturally, the discussion of ceramic (high-tempera ture) superconductors, and certain elements of the rapidly expanding field of optoelectronics. Further, I felt that the readers might be interested in learning some more practical applications which result from the physical concepts which have been treated here.
Download or read book Handbook of Advanced Ceramics and Composites written by Yashwant Mahajan and published by Springer. This book was released on 2020-11-26 with total page 1527 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook presents an authoritative account of the potential of advanced ceramics and composites in strategic applications, including defense, national security, aerospace, and energy security (especially nuclear energy). It highlights how their unique combination of superior properties such as low density, high strength, high elastic modulus, high hardness, high temperature capability, and excellent chemical and environmental stability are optimized in technologies within these fields. The handbook is organized according to application type. It allows readers to learn about strategies that have been used in different fields and to transfer them to their own. The book addresses a wide variety of ceramics and their composites, including PZT ceramics, carbon nanotubes, aerogels, silica radomes, relaxor ferroelectrics, and many others.
Download or read book The Materials Science of Thin Films written by Milton Ohring and published by Academic Press. This book was released on 1992 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared as a textbook complete with problems after each chapter, specifically intended for classroom use in universities.
Download or read book Introduction to Surface Engineering written by P. A. Dearnley and published by Cambridge University Press. This book was released on 2017-01-16 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: This highly illustrated reference work covers the three principal types of surface technologies that best protect engineering devices and products: diffusion technologies, deposition technologies, and other less commonly acknowledged surface engineering (SE) techniques. Various applications are noted throughout the text and additionally whole chapters are devoted to specific SE applications across the automotive, gas turbine engine (GTE), metal machining, and biomedical implant sectors. Along with the benefits of SE, this volume also critically examines SE's limitations. Materials degradation pathways - those which can and those which cannot be mitigated by SE - are rigorously explained. Written from a scientific, materials engineering perspective, this concise text is supported by high-quality images and photo-micrographs which show how surfaces can be engineered to overcome the limits of conventionally produced materials, even in complex or hostile operating environments. This book is a useful resource for undergraduate and postgraduate students as well as professional engineers.
Download or read book Sol Gel Technologies for Glass Producers and Users written by Michel Andre Aegerter and published by Springer Science & Business Media. This book was released on 2013-03-19 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.
Download or read book Introduction to Mineralogy written by Carl W. Correns and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first edition of this book has been out of print for seven years. The ques tion as to whether a new edition should be produced was answered affirmatively on many counts. I think that the considerations which led me to write this book in 1949 are still valid (see Preface to the First Edition). Moreover, a description of those areas of interest which together comprise the field of Mineralogy seems to be more necessary than ever, because of the rapid advances which have been made. Due to the rapid extension of our knowledge, I did not dare again to treat the whole field by myself. Accordingly, Professor ZEMANN kindly agreed to revise the first part of the book dealing with Crystallography. He made many important corrections. In Part II the basic question arose as to whether the physical-chemical approach to rock forming processes, becoming more and more important, required inclusive treatment of the fundamentals of physical chemistry in the book. I see certain dangers in trying to produce a petrology text which is physical chemically self-sufficient. Thus, I retain the same opinion which prevailed when I wrote the previous edition; namely that the necessary basic knowledge should be acquired in lectures and laboratory classes in physics, chemistry, and physical chemistry, and with the help of standard literature dealing with these subjects. This back ground is, therefore, presumed and fundamentals are only referred to occasionally.
Download or read book Carbon Fibers written by Soo-Jin Park and published by Springer. This book was released on 2014-10-08 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains eight chapters that discuss the manufacturing methods, surface treatment, composite interfaces, microstructure-property relationships with underlying fundamental physical and mechanical principles, and applications of carbon fibers and their composites. Recently, carbon-based materials have received much attention for their many potential applications. The carbon fibers are very strong, stiff, and lightweight, enabling the carbon materials to deliver improved performance in several applications such as aerospace, sports, automotive, wind energy, oil and gas, infrastructure, defense, and semiconductors. However, the use of carbon fibers in cost-sensitive, high-volume industrial applications is limited because of their relatively high costs. However, its production is expected to increase because of its widespread use in high-volume industrial applications; therefore, the methods used for manufacturing carbon fibers and carbon-fiber-reinforced composites and their structures and characteristics need to be investigated.
Download or read book Micro and Nanomanufacturing Volume II written by Mark J. Jackson and published by Springer. This book was released on 2017-10-28 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive treatment of micro and nanofabrication techniques, and applies established and research laboratory manufacturing techniques to a wide variety of materials. It is a companion volume to “Micro and Nanomanufacturing” (2007) and covers new topics such as aligned nanowire growth, molecular dynamics simulation of nanomaterials, atomic force microscopy for microbial cell surfaces, 3D printing of pharmaceuticals, microvascular coaptation methods, and more. The chapters also cover a wide variety of applications in areas such as surgery, auto components, living cell detection, dentistry, nanoparticles in medicine, and aerospace components. This is an ideal text for professionals working in the field, and for graduate students in micro and nanomanufacturing courses.
Download or read book Physical Metallurgy and processing of Intermetallic Compounds written by N.S. Stoloff and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: The attractive physical and mechanical properties of ordered intermetallic alloys have been recognized since early in this century. However, periodic attempts to develop intermetallics for structural applications were unsuc cessful, due in major part to the twin handicaps of inadequate low-temper ature ductility or toughness, together with poor elevated-temperature creep strength. The discovery, in 1979, by Aoki and Izumi in Japan that small additions of boron caused a dramatic improvement in the ductility of Ni3Al was a major factor in launching a new wave of fundamental and applied research on intermetallics. Another important factor was the issuance in 1984 of a National Materials Advisory Board reported entitled "Structural Uses for Ductile Ordered Alloys," which identified numerous potential defense-related applications and proposed the launching of a coordinated development program to gather engineering property and processing data. A substantial research effort on titanium aluminides was already underway at the Air Force Materials Laboratory at Wright Patterson Air Force Base in Ohio and, with Air Force support, at several industrial and university laboratories. Smaller programs also were under way at Oak Ridge National Laboratory, under Department of Energy sponsorship. These research efforts were soon augmented in the United States by funding from Department of Defense agencies such as Office of Naval Research and Air Force Office of Scientific Research, and by the National Science Foundation.
Download or read book Materials Chemistry written by Bradley D. Fahlman and published by Springer. This book was released on 2018-08-28 with total page 817 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 3rd edition of this successful textbook continues to build on the strengths that were recognized by a 2008 Textbook Excellence Award from the Text and Academic Authors Association (TAA). Materials Chemistry addresses inorganic-, organic-, and nano-based materials from a structure vs. property treatment, providing a suitable breadth and depth coverage of the rapidly evolving materials field — in a concise format. The 3rd edition offers significant updates throughout, with expanded sections on sustainability, energy storage, metal-organic frameworks, solid electrolytes, solvothermal/microwave syntheses, integrated circuits, and nanotoxicity. Most appropriate for Junior/Senior undergraduate students, as well as first-year graduate students in chemistry, physics, or engineering fields, Materials Chemistry may also serve as a valuable reference to industrial researchers. Each chapter concludes with a section that describes important materials applications, and an updated list of thought-provoking questions.
Download or read book Materials Handbook written by John A. Vaccari and published by McGraw Hill Professional. This book was released on 2002-07-09 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Materials Handbook is an encyclopedic, A-to-Z organization of all types of materials, featuring their key performance properties, principal characteristics and applications in product design. Materials include ferrous and nonferrous metals, plastics, elastomers, ceramics, woods, composites, chemicals, minerals, textiles, fuels, foodstuffs and natural plant and animal substances --more than 13,000 in all. Properties are expressed in both U.S. customary and metric units and a thorough index eases finding details on each and every material. Introduced in 1929 and often known simply as "Brady's," this comprehensive, one-volume, 1244 page encyclopedia of materials is intended for executives, managers, supervisors, engineers, and technicians, in engineering, manufacturing, marketing, purchasing and sales as well as educators and students. Of the dozens of families of materials updated in the 15th Edition, the most extensive additions pertain to adhesives, activated carbon, aluminides, aluminum alloys, catalysts, ceramics, composites, fullerences, heat-transfer fluids, nanophase materials, nickel alloys, olefins, silicon nitride, stainless steels, thermoplastic elastomers, titanium alloys, tungsten alloys, valve alloys and welding and hard-facing alloys. Also widely updated are acrylics, brazing alloys, chelants, biodegradable plastics, molybdenum alloys, plastic alloys, recyclate plastics, superalloys, supercritical fluids and tool steels. New classes of materials added include aliphatic polyketones, carburizing secondary-hardening steels and polyarylene ether benzimidazoles. Carcinogens and materials likely to be cancer-causing in humans are listed for the first time.
Download or read book Electronic Properties of Materials written by Rolf E. Hummel and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: The present book on electrical, optical, magnetic and thermal properties of materials is in many aspects different from other introductory texts in solid state physics. First of all, this book is written for engineers, particularly materials and electrical engineers who want to gain a fundamental under standing of semiconductor devices, magnetic materials, lasers, alloys, etc. Second, it stresses concepts rather than mathematical formalism, which should make the presentation relatively easy to understand. Thus, this book provides a thorough preparation for advanced texts, monographs, or special ized journal articles. Third, this book is not an encyclopedia. The selection oftopics is restricted to material which is considered to be essential and which can be covered in a 15-week semester course. For those professors who want to teach a two-semester course, supplemental topics can be found which deepen the understanding. (These sections are marked by an asterisk [*]. ) Fourth, the present text leaves the teaching of crystallography, X-ray diffrac tion, diffusion, lattice defects, etc. , to those courses which specialize in these subjects. As a rule, engineering students learn this material at the beginning of their upper division curriculum. The reader is, however, reminded of some of these topics whenever the need arises. Fifth, this book is distinctly divided into five self-contained parts which may be read independently.
Download or read book Ceramic Materials and Components for Engines written by Jürgen G. Heinrich and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Several ceramic parts have already proven their suitability for serial application in automobile engines in very impressive ways, especially in Japan, the USA and in Germany. However, there is still a lack of economical quality assurance concepts. Recently, a new generation of ceramic components, for the use in energy, transportation and environment systems, has been developed. The efforts are more and more system oriented in this field. The only possibility to manage this complex issue in the future will be interdisciplinary cooperation. Chemists, physicists, material scientists, process engineers, mechanical engineers and engine manufacturers will have to cooperate in a more intensive way than ever before. The R&D activities are still concentrating on gas turbines and reciprocating engines, but also on brakes, bearings, fuel cells, batteries, filters, membranes, sensors and actuators as well as on shaping and cutting tools for low expense machining of ceramic components. This book summarizes the scientific papers of the 7th International Symposium "Ceramic Materials and Components for Engines". Some of the most fascinating new applications of ceramic meterials in energy, transportation and environment systems are presented. The proceedings shall lead to new ideas for interdisciplinary activities in the future.
