Download or read book Plasma Catalysis for Environmental and Energy Related Applications written by Corina Bradu and published by Mdpi AG. This book was released on 2022-01-25 with total page 110 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis has been a topic of research for many years due to its potential for applications in a wide range of chemical, environmental, and energy-related processes. Non-thermal plasma offers an unconventional way to initiate chemical reactions in gas and in liquid due to the energetic electrons generated in the plasma; however, it suffers from low selectivity. The coupling of plasma with catalysis can steer the reactions in the desired direction, thus ensuring improved selectivity towards the target products and reducing unwanted ones. Environmental applications of plasma catalysis have been focused on the removal of various air and water pollutants, while energy applications include hydrogen, syngas and ammonia production. This Special Issue demonstrates plasma catalysis as a solution to environmental problems caused by the greenhouses gases CO2 and CH4, which can be converted to value-added products and fuels, air pollution with stable polycyclic aromatic hydrocarbons and volatile organic compounds, and water pollution with pharmaceutical products.
Download or read book Plasma Catalysis written by Xin Tu and published by Springer Nature. This book was released on 2019-11-21 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a comprehensive overview of the field of plasma catalysis, regarded as a promising alternative to thermal processes for energy and environmental applications. It bridges the gap between the plasma and catalysis research communities, covering both the fundamentals of plasma catalysis and its application in environmental and energy research. The first section of the book offers a broad introduction to plasma catalysis, covering plasma-catalyst systems, interactions, and modeling. The core of the book then focuses on different applications, describing a wide range of plasma-catalytic processes in catalyst synthesis, environmental clean-up, greenhouse gas conversion and synthesis of materials for energy applications. Chapters cover topics ranging from removal of NOx and VOCs to conversion of methane, carbon dioxide and the reforming of ethanol and methanol. Written by a group of world-leading researchers active in the field, the book forms a valuable resource for scientists, engineers and students with different research backgrounds including plasma physics, plasma chemistry, catalysis, energy, environmental engineering, electrical engineering and material engineering.
Download or read book Plasma Catalysis written by Annemie Bogaerts and published by MDPI. This book was released on 2019-04-02 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma catalysis is gaining increasing interest for various gas conversion applications, such as CO2 conversion into value-added chemicals and fuels, N2 fixation for the synthesis of NH3 or NOx, methane conversion into higher hydrocarbons or oxygenates. It is also widely used for air pollution control (e.g., VOC remediation). Plasma catalysis allows thermodynamically difficult reactions to proceed at ambient pressure and temperature, due to activation of the gas molecules by energetic electrons created in the plasma. However, plasma is very reactive but not selective, and thus a catalyst is needed to improve the selectivity. In spite of the growing interest in plasma catalysis, the underlying mechanisms of the (possible) synergy between plasma and catalyst are not yet fully understood. Indeed, plasma catalysis is quite complicated, as the plasma will affect the catalyst and vice versa. Moreover, due to the reactive plasma environment, the most suitable catalysts will probably be different from thermal catalysts. More research is needed to better understand the plasma–catalyst interactions, in order to further improve the applications.
Download or read book Plasma Chemistry and Catalysis in Gases and Liquids written by Vasile I. Parvulescu and published by John Wiley & Sons. This book was released on 2013-03-19 with total page 423 pages. Available in PDF, EPUB and Kindle. Book excerpt: Filling the gap for a book that covers not only plasma in gases but also in liquids, this is all set to become the standard reference for this topic. It provides a broad-based overview of plasma-chemical and plasmacatalytic processes generated by electrical discharges in gases, liquids and gas/liquid environments in both fundamental and applied aspects by focusing on their environmental and green applications and also taking into account their practical and economic viability. With the topics addressed by an international group of major experts, this is a must-have for scientists, engineers, students and postdoctoral researchers specializing in this field.
Download or read book Plasma Chemistry and Gas Conversion written by Nikolay Britun and published by BoD – Books on Demand. This book was released on 2018-12-19 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt: Low-temperature non-equilibrium gaseous discharges represent nearly ideal media for boosting plasma-based chemical reactions. In these discharges the energy of plasma electrons, after being received from the electromagnetic field, is transferred to the other degrees of freedom differently, ideally with only a small part going to the translational motion of heavy gas particles. This unique property enables the important application of non-equilibrium plasmas for greenhouse gas conversion. While the degree of discharge non-equilibrium often defines the energetic efficiency of conversion, other factors are also of a great importance, such as type of discharge, presence of plasma catalysis, etc. This book is focused on the recent achievements in optimization and understanding of non-equilibrium plasma for gas conversion via plasma modeling and experimental work.
Download or read book Methane Conversion written by D.M. Bibby and published by Elsevier. This book was released on 1988-03-01 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume comprises the invited plenary lectures, contributed and poster papers presented at a symposium organised to mark the successful inauguration of the world's first commercial plant for production of gasoline from natural gas, based on the Mobil methanol-to-gasoline process. The objectives of the Symposium were to present both fundamental research and engineering aspects of the development and commercialization of gas-to-gasoline processes. These include steam reforming, methanol synthesis and methanol-to-gasoline. Possible alternative processes e.g. MOGD, Fischer-Tropsch synthesis of hydrocarbons, and the direct conversion of methane to higher hydrocarbons were also considered.The papers in this volume provide a valuable and extremely wide-ranging overview of current research into the various options for natural gas conversion, giving a detailed description of the gas-to-gasoline process and plant. Together, they represent a unique combination of fundamental surface chemistry catalyst characterization, reaction chemistry and engineering scale-up and commercialization.
Download or read book Cold Atmospheric Plasma CAP Technology and Applications written by Zhitong Chen and published by Springer Nature. This book was released on 2022-05-31 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cold atmospheric plasma (CAP) is a promising and rapidly emerging technology for a wide range of applications, from daily life to industry. CAP’s key advantage is its unique ability to effectively deliver reactive species to subjects including biological materials, liquid media, aerosols, and manufactured surfaces. This book assesses the state-of-art in CAP research and implementation for applications including agriculture, medicine, environment, materials, catalysis, and energy. The mechanisms of generation and transport of the key reactive species in the plasma are introduced and examined in the context of their applications. Opportunities and challenges for novel technologies, fresh ideas/concepts, expanded multidisciplinary study, and new applications are discussed. The authors’ vision for the converging trends across diverse disciplines is proposed to stimulate critical discussions, research directions, and collaborations.
Download or read book Role of Plasma Catalysis in the Microwave Plasma Assisted Conversion of CO2 written by Guoxing Chen and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Climate change and global warming caused by the increasing emissions of greenhouse gases (such as CO2) recently attract attention of the scientific community. The combination of plasma and catalysis is of great interest for turning plasma chemistry in applications related to pollution and energy issues. In this chapter, our recent research efforts related to optimization of the conversion of CO2 and CO2/H2O mixtures in a pulsed surface-wave sustained microwave discharge are presented. The effects of different plasma operating conditions and catalyst preparation methods on the CO2 conversion and its energy efficiency are discussed. It is demonstrated that, compared to the plasma-only case, the CO2 conversion and energy efficiency can be enhanced by a factor of ∼2.1 by selecting the appropriate conditions. The catalyst characterization shows that Ar plasma treatment results in a higher density of oxygen vacancies and a comparatively uniform distribution of NiO on the TiO2 surface, which strongly influence CO2 conversion and energy efficiencies of this process. The dissociative electron attachment of CO2 at the catalyst surface enhanced by the oxygen vacancies and plasma electrons may explain the increase of conversion and energy efficiencies in this case. A mechanism of plasma-catalytic conversion of CO2 at the catalyst surface in CO2 and CO2/H2O mixtures is proposed.
Download or read book Proceedings of the 4th International Symposium on Plasma and Energy Conversion written by Dong Dai and published by Springer Nature. This book was released on 2023-05-23 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings highlight the fundamental researches and up-to-data developments on energy conversion and high-voltage application by means of low temperature and atmospheric pressure plasma. In recent years, plasma-assisted energy conversion gains increasing attention as an alternative to thermal-catalysis or electro-catalysis. These proceedings discuss and exchange cutting-edge scientific innovations and technological advances in fields like plasma-enabled synthesis of chemicals and fuels, plasma-enabled the environmental clean-up, plasma-enabled catalysis treatment, in-situ probing of plasma-catalyst interactions and its high-voltage applications, which show great potentials in industrial demands like CO2 hydrogenation, CH4 reforming and nitrogen fixation, plasma deposition, chemical synthesis, VOC abatement and high-voltage insulation. This collection of papers presents the main applications of plasma-induced energy conversion and high-voltage discharge in the form of separate chapters, including cutting-edge studies on conversion technology, complex mechanism simulation, in-situ detection and converged applications by artificial intelligence. These proceedings are suitable for researchers engaged in fields like plasma-catalysis, discharge diagnosis and modelling, chemical modelling and high-voltage applications. The major topics covered in the conference proceedings are: 1) Advanced plasma-catalysis conversion technology; 2) Advanced in-situ discharge diagnosis technology; 3) Advanced in-situ plasma-catalysis characterization; 4) Multi-scale or innovative modelling technology; 5) High-voltage discharge and application.
Download or read book Proceedings of the 5th International Symposium on Plasma and Energy Conversion written by Zhi Fang and published by Springer Nature. This book was released on with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Engineering Solutions for CO2 Conversion written by Tomas Ramirez Reina and published by John Wiley & Sons. This book was released on 2021-07-19 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide that offers a review of the current technologies that tackle CO2 emissions The race to reduce CO2 emissions continues to be an urgent global challenge. "Engineering Solutions for CO2 Conversion" offers a thorough guide to the most current technologies designed to mitigate CO2 emissions ranging from CO2 capture to CO2 utilization approaches. With contributions from an international panel representing a wide range of expertise, this book contains a multidisciplinary toolkit that covers the myriad aspects of CO2 conversion strategies. Comprehensive in scope, it explores the chemical, physical, engineering and economical facets of CO2 conversion. "Engineering Solutions for CO2 Conversion" explores a broad range of topics including linking CFD and process simulations, membranes technologies for efficient CO2 capture-conversion, biogas sweetening technologies, plasma-assisted conversion of CO2, and much more. This important resource: * Addresses a pressing concern of global environmental damage, caused by the greenhouse gases emissions from fossil fuels * Contains a review of the most current developments on the various aspects of CO2 capture and utilization strategies * Incldues information on chemical, physical, engineering and economical facets of CO2 capture and utilization * Offers in-depth insight into materials design, processing characterization, and computer modeling with respect to CO2 capture and conversion Written for catalytic chemists, electrochemists, process engineers, chemical engineers, chemists in industry, photochemists, environmental chemists, theoretical chemists, environmental officers, "Engineering Solutions for CO2 Conversion" provides the most current and expert information on the many aspects and challenges of CO2 conversion.
Download or read book Carbon Dioxide Chemistry Capture and Oil Recovery written by Iyad Karamé and published by BoD – Books on Demand. This book was released on 2018-08-16 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fossil fuels still need to meet the growing demand of global economic development, yet they are often considered as one of the main sources of the CO2 release in the atmosphere. CO2, which is the primary greenhouse gas (GHG), is periodically exchanged among the land surface, ocean, and atmosphere where various creatures absorb and produce it daily. However, the balanced processes of producing and consuming the CO2 by nature are unfortunately faced by the anthropogenic release of CO2. Decreasing the emissions of these greenhouse gases is becoming more urgent. Therefore, carbon sequestration and storage (CSS) of CO2, its utilization in oil recovery, as well as its conversion into fuels and chemicals emerge as active options and potential strategies to mitigate CO2 emissions and climate change, energy crises, and challenges in the storage of energy.
Download or read book NOx Trap Catalysts and Technologies written by Luca Lietti and published by Royal Society of Chemistry. This book was released on 2018-06-13 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will be the first to comprehensively present the current research on catalysts used for NOx abatement in lean exhausts.
Download or read book Catalysis for Clean Energy and Environmental Sustainability written by K. K. Pant and published by Springer Nature. This book was released on 2021-05-13 with total page 933 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two-volume work that offers a unique blend of information on realistic evaluations of catalyst-based synthesis processes using green chemistry principles and the environmental sustainability applications of such processes for biomass conversion, refining, and petrochemical production. The volumes provide a comprehensive resource of state-of-the-art technologies and green chemistry methodologies from researchers, academics, and chemical and manufacturing industrial scientists. The work will be of interest to professors, researchers, and practitioners in clean energy catalysis, green chemistry, chemical engineering and manufacturing, and environmental sustainability. This volume focuses on the potentials, recent advances, and future prospects of catalysis for biomass conversion and value-added chemicals production via green catalytic routes. Readers are presented with a mechanistic framework assessing the development of product selective catalytic processes for biomass and biomass-derived feedstock conversion. The book offers a unique combination of contributions from experts working on both lab-scale and industrial catalytic processes and provides insight into the use of various catalytic materials (e.g., mineral acids, heteropolyacid, metal catalysts, zeolites, metal oxides) for clean energy production and environmental sustainability.
Download or read book Catalysis for Clean Energy and Environmental Sustainability written by K. K. Pant and published by Springer Nature. This book was released on 2021-04-01 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a two-volume work that offers a unique blend of information on realistic evaluations of catalyst-based synthesis processes using green chemistry principles and the environmental sustainability applications of such processes for biomass conversion, refining, and petrochemical production. The volumes provide a comprehensive resource of state-of-the-art technologies and green chemistry methodologies from researchers, academics, and chemical and manufacturing industrial scientists. The work will be of interest to professors, researchers, and practitioners in clean energy catalysis, green chemistry, chemical engineering and manufacturing, and environmental sustainability. This volume focuses on catalyst synthesis and green chemistry applications for petrochemical and refining processes. While most books on the subject focus on catalyst use for conventional crude, fuel-oriented refineries, this book emphasizes recent transitions to petrochemical refineries with the goal of evaluating how green chemistry applications can produce clean energy through petrochemical industrial means. The majority of the chapters are contributed by industrial researchers and technicians and address various petrochemical processes, including hydrotreating, hydrocracking, flue gas treatment and isomerization catalysts.
Download or read book Advanced Electrocatalysts for Low Temperature Fuel Cells written by Francisco Javier Rodríguez-Varela and published by Springer. This book was released on 2018-10-09 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the reader to the state of the art in nanostructured anode and cathode electrocatalysts for low-temperature acid and alkaline fuel cells. It explores the electrocatalysis of anode (oxidation of organic molecules) and cathode (oxygen reduction) reactions. It also offers insights into metal-carbon interactions, correlating them with the catalytic activity of the electrochemical reactions. The book explores the electrocatalytic behaviour of materials based on noble metals and their alloys, as well as metal-metal oxides and metal-free nanostructures. It also discusses the surface and structural modification of carbon supports to enhance the catalytic activity of electrocatalysts for fuel-cell reactions.
Download or read book Plasma Chemistry written by Alexander Fridman and published by Cambridge University Press. This book was released on 2008-05-05 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a fundamental introduction to all aspects of modern plasma chemistry, this book describes mechanisms and kinetics of chemical processes in plasma, plasma statistics, thermodynamics, fluid mechanics and electrodynamics, as well as all major electric discharges applied in plasma chemistry. Fridman considers most of the major applications of plasma chemistry, from electronics to thermal coatings, from treatment of polymers to fuel conversion and hydrogen production and from plasma metallurgy to plasma medicine. It is helpful to engineers, scientists and students interested in plasma physics, plasma chemistry, plasma engineering and combustion, as well as chemical physics, lasers, energy systems and environmental control. The book contains an extensive database on plasma kinetics and thermodynamics and numerical formulas for practical calculations related to specific plasma-chemical processes and applications. Problems and concept questions are provided, helpful in courses related to plasma, lasers, combustion, chemical kinetics, statistics and thermodynamics, and high-temperature and high-energy fluid mechanics.
