Download or read book Plasma Assisted Synthesis and Physical Chemical Characterization of Titanium Nitride Films written by Michael Robert Hilton and published by . This book was released on 1987 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1989 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Transmission Electron Microscopy Characterization of Nanomaterials written by Challa S.S.R. Kumar and published by Springer Science & Business Media. This book was released on 2013-12-09 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Third volume of a 40volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Transmission electron microscopy characterization of nanomaterials. Modern applications and state-of-the-art techniques are covered and make this volume an essential reading for research scientists in academia and industry.

Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Protective Coatings and Thin Films written by Y. Pauleau and published by Springer Science & Business Media. This book was released on 1996-12-31 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume entitled "Protective Coatings and Thin Films : Synthesis, Characterization and Applications" contains the Proceedings of the NATO Advanced Research Workshop (ARW) held in Alvor, Portugal from May 30 to June 5, 1996. This NATO-ARW was an expert meeting on the surface protection and modification of solid materials subjected to interactions with the environment. The meeting attracted 10 key speakers, 40 contributing speakers and 3 observers from various countries. The existing knowledge and current status of the science and technology related to protective coatings and thin films were assessed through a series of oral presentations, key notes (titles underlined in the volume content) and contributed papers distributed over various sessions dealing with: (a) plasma-assisted physical and chemical vapor deposition processes to enhance wear and corrosion protection of materials, (b) low friction coatings operating in hostile environment (vacuum, space, extreme temperatures, . . . ), (c) polymer films for protection against mechanical damage and chemical attack, (d) characterization of the structure of films and correlations with mechanical properties, (e) wear and corrosion resistant thermal spray coatings, (f) functional gradient ceramic/metallic coatings produced by high energy laser beam and energetic deposition processes for high temperature applications, (g) protective coatings for optical systems, and (h) ion beam assisted deposition of coatings for protection of materials against aqueous corrosion.

Download or read book Use of Services for Family Planning and Infertility United States 1982 written by Gerry E. Hendershot and published by . This book was released on 1988 with total page 982 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 1982 statistics on the use of family planning and infertility services presented in this report are preliminary results from Cycle III of the National Survey of Family Growth (NSFG), conducted by the National Center for Health Statistics. Data were collected through personal interviews with a multistage area probability sample of 7969 women aged 15-44. A detailed series of questions was asked to obtain relatively complete estimates of the extent and type of family planning services received. Statistics on family planning services are limited to women who were able to conceive 3 years before the interview date. Overall, 79% of currently mrried nonsterile women reported using some type of family planning service during the previous 3 years. There were no statistically significant differences between white (79%), black (75%) or Hispanic (77%) wives, or between the 2 income groups. The 1982 survey questions were more comprehensive than those of earlier cycles of the survey. The annual rate of visits for family planning services in 1982 was 1077 visits /1000 women. Teenagers had the highest annual visit rate (1581/1000) of any age group for all sources of family planning services combined. Visit rates declined sharply with age from 1447 at ages 15-24 to 479 at ages 35-44. Similar declines with age also were found in the visit rates for white and black women separately. Nevertheless, the annual visit rate for black women (1334/1000) was significantly higher than that for white women (1033). The highest overall visit rate was for black women 15-19 years of age (1867/1000). Nearly 2/3 of all family planning visits were to private medical sources. Teenagers of all races had higher family planning service visit rates to clinics than to private medical sources, as did black women age 15-24. White women age 20 and older had higher visit rates to private medical services than to clinics. Never married women had higher visit rates to clinics than currently or formerly married women. Data were also collected in 1982 on use of medical services for infertility by women who had difficulty in conceiving or carrying a pregnancy to term. About 1 million ever married women had 1 or more infertility visits in the 12 months before the interview. During the 3 years before interview, about 1.9 million women had infertility visits. For all ever married women, as well as for white and black women separately, infertility services were more likely to be secured from private medical sources than from clinics. The survey design, reliability of the estimates and the terms used are explained in the technical notes.

Download or read book Metallurgical Coatings and Thin Films 1992 written by G.E. McGuire and published by Elsevier. This book was released on 2012-12-02 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the increasingly important requirements for high technology materials is that they possess near-surface properties different to their bulk properties. Specific surface properties are generally achieved through the use of these films or coatings or by modifying the structure or composition of the near surface. This two-volume work contains 157 papers covering a wide range of topics involving films, coatings, and modified surfaces. All aspects of the development of deposition technologies are addressed including basic research, applied research, applications development and full scale industrial production. The work will be of interest to materials scientists, physicists, electronic, chemical and mechanical engineers, and chemists.

Download or read book Comprehensive Materials Processing written by and published by Newnes. This book was released on 2014-04-07 with total page 5485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Materials Processing, Thirteen Volume Set provides students and professionals with a one-stop resource consolidating and enhancing the literature of the materials processing and manufacturing universe. It provides authoritative analysis of all processes, technologies, and techniques for converting industrial materials from a raw state into finished parts or products. Assisting scientists and engineers in the selection, design, and use of materials, whether in the lab or in industry, it matches the adaptive complexity of emergent materials and processing technologies. Extensive traditional article-level academic discussion of core theories and applications is supplemented by applied case studies and advanced multimedia features. Coverage encompasses the general categories of solidification, powder, deposition, and deformation processing, and includes discussion on plant and tool design, analysis and characterization of processing techniques, high-temperatures studies, and the influence of process scale on component characteristics and behavior. Authored and reviewed by world-class academic and industrial specialists in each subject field Practical tools such as integrated case studies, user-defined process schemata, and multimedia modeling and functionality Maximizes research efficiency by collating the most important and established information in one place with integrated applets linking to relevant outside sources

Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS)* at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dis semination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volumes were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 38 (thesis year 1993) a total of 13,787 thesis titles from 22 Canadian and 164 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this impor tant annual reference work. While Volume 38 reports theses submitted in 1993, on occasion, certain uni versities do report theses submitted in previous years but not reported at the time.

Download or read book American Doctoral Dissertations written by and published by . This book was released on 2001 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Silicon Nanocrystals written by Lorenzo Pavesi and published by John Wiley & Sons. This book was released on 2010-02-02 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unique collection of knowledge represents a comprehensive treatment of the fundamental and practical consequences of size reduction in silicon crystals. This clearly structured reference introduces readers to the optical, electrical and thermal properties of silicon nanocrystals that arise from their greatly reduced dimensions. It covers their synthesis and characterization from both chemical and physical viewpoints, including ion implantation, colloidal synthesis and vapor deposition methods. A major part of the text is devoted to applications in microelectronics as well as photonics and nanobiotechnology, making this of great interest to the high-tech industry.

Download or read book Carbide Nitride and Boride Materials Synthesis and Processing written by A.W. Weimer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 675 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbide, Nitride and Boride Materials Synthesis and Processing is a major reference text addressing methods for the synthesis of non-oxides. Each chapter has been written by an expert practising in the subject area, affiliated with industry, academia or government research, thus providing a broad perspective of information for the reader. The subject matter ranges from materials properties and applications to methods of synthesis including pre- and post-synthesis processing. Although most of the text is concerned with the synthesis of powders, chapters are included for other materials such as whiskers, platelets, fibres and coatings. Carbide, Nitride and Boride Materials Synthesis and Processing is a comprehensive overview of the subject and is suitable for practitioners in the industry as well as those looking for an introduction to the field. It will be of interest to chemical, mechanical and ceramic engineers, materials scientists and chemists in both university and industrial environments working on or with refractory carbides, nitrides and borides.

Download or read book Metals Abstracts written by and published by . This book was released on 1994 with total page 1584 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Microfabrication written by Sami Franssila and published by John Wiley & Sons. This book was released on 2010-10-29 with total page 534 pages. Available in PDF, EPUB and Kindle. Book excerpt: This accessible text is now fully revised and updated, providing an overview of fabrication technologies and materials needed to realize modern microdevices. It demonstrates how common microfabrication principles can be applied in different applications, to create devices ranging from nanometer probe tips to meter scale solar cells, and a host of microelectronic, mechanical, optical and fluidic devices in between. Latest developments in wafer engineering, patterning, thin films, surface preparation and bonding are covered. This second edition includes: expanded sections on MEMS and microfluidics related fabrication issues new chapters on polymer and glass microprocessing, as well as serial processing techniques 200 completely new and 200 modified figures more coverage of imprinting techniques, process integration and economics of microfabrication 300 homework exercises including conceptual thinking assignments, order of magnitude estimates, standard calculations, and device design and process analysis problems solutions to homework problems on the complementary website, as well as PDF slides of the figures and tables within the book With clear sections separating basic principles from more advanced material, this is a valuable textbook for senior undergraduate and beginning graduate students wanting to understand the fundamentals of microfabrication. The book also serves as a handy desk reference for practicing electrical engineers, materials scientists, chemists and physicists alike. www.wiley.com/go/Franssila_Micro2e

Download or read book Physics Briefs written by and published by . This book was released on 1992 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Trends in Nanoscale Mechanics written by Vasyl Michael Harik and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: An outstanding feature of this book is a collection of state-of-the-art reviews written by leading researchers in the nanomechanics of carbon nanotubes, nanocrystalline materials, biomechanics and polymer nanocomposites. The structure and properties of carbon nanotubes, polycrystalline metals, and coatings are discussed in great details. The book is an exceptional resource on multi-scale modelling of metals, nanocomposites, MEMS materials and biomedical applications. An extensive bibliography concerning all these topics is included. Highlights on bio-materials, MEMS, and the latest multi-scale methods (e.g., molecular dynamics and Monte Carlo) are presented. Numerous illustrations of inter-atomic potentials, nanotube deformation and fracture, grain rotation and growth in solids, ceramic coating structures, blood flows and cell adhesion are discussed. This book provides a comprehensive review of latest developments in the analysis of mechanical phenomena in nanotechnology and bio-nanotechnology.