Download or read book Plasma assisted Surface Modification of Biopolymers written by Satomi Tajima and published by . This book was released on 2006 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biodegradable Green Composites written by Susheel Kalia and published by John Wiley & Sons. This book was released on 2016-02-29 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprehensively addresses surface modification of natural fibers to make them more effective, cost-efficient, and environmentally friendly. Topics include the elucidation of important aspects surrounding chemical and green approaches for the surface modification of natural fibers, the use of recycled waste, properties of biodegradable polyesters, methods such as electrospinning, and applications of hybrid composite materials.
Download or read book Surface Modification of Biopolymers written by Vijay Kumar Thakur and published by John Wiley & Sons. This book was released on 2015-04-27 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book addresses surface modification techniques, which are critical for tailoring and broadening the applications of naturally occurring biopolymers. Biopolymers represent a sustainable solution to the need for new materials in the auto, waste removal, biomedical device, building material, defense, and paper industries. Features: First comprehensive summary of biopolymer modification methods to enhance compatibility, flexibility, enhanced physicochemical properties, thermal stability, impact response, and rigidity, among others Address of a green, eco-friendly materials that is increasing in use, underscoring the roles of material scientists in the future of new "green" bioolymer material use Coverage applications in automotive development, hazardous waste removal, biomedical engineering, pulp and paper industries, development of new building materials, and defense-related technologies Facilitation of technology transfer
Download or read book Non Thermal Plasma Technology for Polymeric Materials written by Sabu Thomas and published by Elsevier. This book was released on 2018-10-08 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-Thermal Plasma Technology for Polymeric Materials: Applications in Composites, Nanostructured Materials and Biomedical Fields provides both an introduction and practical guide to plasma synthesis, modification and processing of polymers, their composites, nancomposites, blends, IPNs and gels. It examines the current state-of-the-art and new challenges in the field, including the use of plasma treatment to enhance adhesion, characterization techniques, and the environmental aspects of the process. Particular attention is paid to the effects on the final properties of composites and the characterization of fiber/polymer surface interactions. This book helps demystify the process of plasma polymerization, providing a thorough grounding in the fundamentals of plasma technology as they relate to polymers. It is ideal for materials scientists, polymer chemists, and engineers, acting as a guide to further research into new applications of this technology in the real world. - Enables materials scientists and engineers to deploy plasma technology for surface treatment, characterization and analysis of polymeric materials - Reviews the state-of-the-art in plasma technology for polymer synthesis and processing - Presents detailed coverage of the most advanced applications for plasma polymerization, particularly in medicine and biomedical engineering, areas such as implants, biosensors and tissue engineering
Download or read book Handbook of Biopolymers written by Sabu Thomas and published by Springer Nature. This book was released on 2023-04-29 with total page 1535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on biopolymers offers a comprehensive source for biomaterial professionals. It covers all elementary topics related to the properties of biopolymers, the production, and processing of biopolymers, applications of biopolymers, examples of biopolymers, and the future of biopolymers. Edited by experts in the field, the book highlights international professionals’ longstanding experiences and addresses the requirements of practitioners and newcomers in this field in finding a solution to their problems. The book brings together several natural polymers, their extraction/production, and physio-chemical features. The topics covered in this book are biopolymers from renewable sources, marine prokaryotes, soy protein and humus oils, biopolymer recycling, chemical modifications, and specific properties. The book also focuses on the potential and diverse applications of biogenic and bio-derived polymers. The content includes industrial applications of natural polymeric molecules and applications in key areas such as material, biomedical, sensing, packaging, biomedicine, and biotechnology, and tissue engineering applications are discussed in detail. The objective of this book is to fill the gap between the researchers working in the laboratory to cutting-edge technological applications in related industries. This book will be a very valuable reference material for graduates and post-graduate students, academic researchers, professionals, research scholars, and scientists, and for anyone who has a flavor for doing biomaterial research. The books are designed to serve as a bridge between undergraduate textbooks in biochemistry and professional literature. The book provides universal perspectives for an emerging field where classical polymer science blends with molecular biology with highlights on recent advances.
Download or read book Biopolymer Grafting Applications written by Vijay Kumar Thakur and published by Elsevier. This book was released on 2017-09-19 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biopolymer Grafting: Applications presents the latest research and developments in the practical application of these methods in industry, both to enable polymer scientists and engineers to keep up with the latest research trends, as well as to propose ideas for further research and application. Research into bio-based polymers has become increasingly prevalent. However, due to challenges related to the properties of these materials compared to synthetic polymers—such as their resistance to chemicals or weather—uptake has not dramatically increased yet. As a result, improvements in surface modification of bio-polymers through graft copolymerization are enormously important, because they will widen the scope of their applications. Relevant industries for application of these methods include automotive, construction, food, packaging, agriculture, textiles and paper. This book provides an overview of the developments made in the area of biopolymer-based graft polymers. Advantages, disadvantages and suggestions for future works are discussed, assisting materials scientists and researchers in mapping out the future of these new "green" materials through value addition to enhance their use. - Helps researchers and product developers understand the applications and limitations of biopolymer copolymers or copolymers of natural polymers - Offers a roadmap to future applications development in a range of different industries, including automotive, biomedical and packaging - Increases familiarity with a range of biopolymer grafting processes, enabling materials scientists and engineers to improve material properties and widen the range of potential biopolymer applications
Download or read book Plasma Nanoengineering and Nanofabrication written by Krasimir Vasilev and published by MDPI. This book was released on 2018-07-04 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Plasma Nanoengineering and Nanofabrication" that was published in Nanomaterials
Download or read book Surface Coating and Modification of Metallic Biomaterials written by Cuie Wen and published by Woodhead Publishing. This book was released on 2015-03-31 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite advances in alternative materials, metals are still the biomaterial of choice for a number of clinical applications such as dental, orthopedic and cardiac implants. However, there are a number of intrinsic problems associated with implanting metal in the biological environment, such as wear, corrosion, biocompatibility and toxicity, which must be addressed. Modern technology has enabled scientists to modify metal surfaces or apply special coatings to metals to improve their performance safety. Surface Coating and Modification of Metallic Biomaterials will discuss the most important modification techniques and coatings for metals, first covering the fundamentals of metals as a biomaterial and then exploring surface modification techniques and coatings. - An expansive overview of surface modification techniques for biomedical use - In-depth exploration of issues arising from metal biomaterial use - Includes examples of applications in a clinical setting
Download or read book Surface Engineering of Biomaterials written by Ajit Behera and published by CRC Press. This book was released on 2024-03-20 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface engineering provides one of the most important means of engineering product differentiation in terms of quality, performance, and lifecycle cost. It is essential to achieve predetermined functional properties of materials such as mechanical strength, biocompatibility, corrosion resistance, wear resistance, and heat and oxidation resistance. Surface Engineering of Biomaterials addresses this topic across a diverse range of process technologies and healthcare applications. Introduces biomaterial surface science and surface engineering and includes criteria for biomaterial surface selection Focuses on a broad array of materials including metals, ceramics, polymers, alloys, and composites Discusses corrosion, degradation, and material release issues in implant materials Covers various processing routes to develop biomaterial surfaces, including for smart and energy applications Details techniques for post-modification of biomaterial surfaces This reference work helps researchers working at the intersection of materials science and biotechnology to engineer functional biomaterials for a variety of applications.
Download or read book Nonthermal Plasmas for Materials Processing written by Jörg Florian Friedrich and published by John Wiley & Sons. This book was released on 2022-07-15 with total page 805 pages. Available in PDF, EPUB and Kindle. Book excerpt: NONTHERMAL PLASMAS FOR MATERIALS PROCESSING This unique book covers the physical and chemical aspects of plasma chemistry with polymers and gives new insights into the interaction of physics and chemistry of nonthermal plasmas and their applications in materials science for physicists and chemists. The properties and characteristics of plasmas, elementary (collision) processes in the gas phase, plasma surface interactions, gas discharge plasmas and technical plasma sources, atmospheric plasmas, plasma diagnostics, polymers and plasmas, plasma polymerization, post-plasma processes, plasma, and wet-chemical processing, plasma-induced generation of functional groups, and the chemical reactions on these groups along with a few exemplary applications are discussed in this comprehensive but condensed state-of-the-art book on plasma chemistry and its dependence on plasma physics. While plasma physics, plasma chemistry, and polymer science are often handled separately, the aim of the authors is to harmoniously join the physics and chemistry of low-pressure and atmospheric-pressure plasmas with polymer surface chemistry and polymerization and to compare such chemistry with classic chemistry. Readers will find in these chapters Interaction of plasma physics and chemistry in plasmas and at the surface of polymers; Explanation and interpretation of physical and chemical mechanisms on plasma polymerization and polymer surface modification; Introduction of modern techniques in plasma diagnostics, surface analysis of solids, and special behavior of polymers on exposure to plasmas; Discussion of the conflict of energy-rich plasma species with permanent energy supply and the much lower binding energies in polymers and alternatives to avoid random polymer decomposition Technical applications such as adhesion, cleaning, wettability, textile modification, coatings, films, etc. New perspectives are explained about how to use selective and mild processes to allow post-plasma chemistry on non-degraded polymer surfaces. Audience Physicists, polymer chemists, materials scientists, industrial engineers in biomedicine, coatings, printing, etc.
Download or read book Advanced Concepts and Architectures for Plasma Enabled Material Processing written by Oleg O. Baranov and published by Morgan & Claypool Publishers. This book was released on 2020-09-30 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma-based techniques are widely and successfully used across the field of materials processing, advanced nanosynthesis, and nanofabrication. The diversity of currently available processing architectures based on or enhanced by the use of plasmas is vast, and one can easily get lost in the opportunities presented by each of these configurations. This mini-book provides a concise outline of the most important concepts and architectures in plasma-assisted processing of materials, helping the reader navigate through the fundamentals of plasma system selection and optimization. Architectures discussed in this book range from the relatively simple, user-friendly types of plasmas produced using direct current, radio-frequency, microwave, and arc systems, to more sophisticated advanced systems based on incorporating and external substrate architectures, and complex control mechanisms of configured magnetic fields and distributed plasma sources.
Download or read book Surface Engineering and Technology for Biomedical Implants written by Yoshiki Oshida and published by Momentum Press. This book was released on 2014-04-15 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new book synthesizes a wide range of interdisciplinary literature to provide the state-of-the art of biomedical implants. It discusses materials and explains the three basic requirements for implant success from a surface engineering perspective: biological compatibility, biomechanical compatibility, morphological compatibility. Biomedical, mechanical, and materials engineers will find this book indispensable for understanding proper treatment of implant surfaces in order to achieve clinical success. Highlights include: • Coverage of surface engineering of polymer, metallic, ceramic and composite implant materials; • Coverage of chemical, mechanical, physical, thermal, and combined surface modification technologies; • Explanations of interfacial reaction between vital tissue and non-vital implant surface; and • Methodologies and technologies for modification of surface layer/zone to promote the osteo-integration, the ultimate success for biomedical implants in both dental and medical practice.
Download or read book Antibacterial Surfaces written by Elena Ivanova and published by Springer. This book was released on 2015-11-09 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: ‘Antibacterial Surfaces’ covers the advances being made in the design of antibacterial surfaces, which have the ability to either prevent the initial attachment of bacterial cells, or kill any cells that come into contact with these surfaces. This book discusses the mechanisms associated with the attachment of bacteria to surfaces and the main strategies currently being employed to control the initial attachment processes. These strategies are expanded upon in the subsequent chapters, where the definition and description of antibacterial surfaces are clarified, as are the mechanisms that come into play when determining the effectiveness of an antibacterial surface. Subsequent chapters discuss a number of naturally occurring antibacterial surfaces, the methods currently being used for producing synthetic antibacterial surfaces, and the current and potential applications of such materials. This book will be of great interest to people who work with materials that need to remain free of bacterial films, from designing safer biomedical implants to the production of self-cleaning materials where the prevention of biofilm formation has significant economic advantages.
Download or read book Research Methodology in Chemical Sciences written by Tanmoy Chakraborty and published by CRC Press. This book was released on 2017-03-03 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Methodology in Chemical Sciences provides an eclectic survey of contemporary problems in experimental, theoretical, and applied chemistry. This book covers recent trends in research with the different domain of the chemical sciences. The chapters, written by knowledgeable researchers, provide different insights to the modern-day research in the domain of spectroscopy, plasma modification, and theoretical and computational analysis of chemical problems. It covers descriptions of experimental techniques, discussions on theoretical modeling, and much more.
Download or read book Green Polymeric Nanocomposites written by Satya Eswari Jujjavarapu and published by CRC Press. This book was released on 2020-01-28 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering fundamentals through applications, this book discusses environmentally friendly polymer nanocomposites and alternatives to traditional nanocomposites through detailed reviews of a variety of materials procured from different resources, their synthesis, and applications using alternative green approaches. The text: Describes green polymeric nanocomposites that show greater properties in terms of degradability, biocompatibility, synthesis process, cost effectiveness, mechanical strength, high surface area, nontoxicity, and environmental friendliness Explains the basics of eco-friendly polymer nanocomposites from different natural resources and their chemistry Discusses practical applications that present future directions in the biomedical, pharmaceutical, and automotive industries This book is aimed at scientists, researchers, and academics working in nanotechnology, biomaterials, polymer science, and those studying products derived from eco-friendly nanomaterials.
Download or read book Progress in Adhesion and Adhesives Volume 2 written by K. L. Mittal and published by John Wiley & Sons. This book was released on 2017-06-15 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the ever-increasing amount of research being published it is a Herculean task to be fully conversant with the latest research developments in any field, and the arena of adhesion and adhesives is no exception. Thus, topical review articles provide an alternate and very efficient way to stay abreast of the state-of-the-art in may subjects representing the field of adhesion science and adheisves. Based on the success and the warm reception accorded to the premier volume in this series “Progress in Adhesion and Adhesives” (containing the review articles published in Volume 2 (2014) of the journal Reviews of Adhesion and Adhesives (RAA)), volume 2 comprises 14 review articles published in Volume 4 (2016) of RAA. The subjects of these 14 reviews fall into the following general areas: 1. Surface modification of polymers for a variety of purposes. 2. Adhesion aspects in reinforced composites 3. Thin films/coatings and their adhesion measurement 4. Bioadhesion and bio-implants 5. Adhesives and adhesive joints 6. General adhesion aspects The topics covered include: surface modification of natural fibers for reinforced polymer composites; adhesion of submicrometer thin metals films; surface treatments to modulate bioadhesion; hot-melt adhesives from renewable resources; particulate-polymer composites; functionally graded adhesively bonded joints; fabrication of nano-biodevices; effects of particulates on contact angles , thermal stresses in adhesively bonded joints and ways to mitigate these; laser-assisted electroless metallization of polymer materials; adhesion measurement of coatings on biodevices/implants; cyanoacrylate adhesives; and adhesion of green flame retardant coatings onto polyolefins.
Download or read book Coatings for Biomedical Applications written by Mike Driver and published by Elsevier. This book was released on 2012-02-22 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: The biomaterials sector is rapidly expanding and significant advances have been made in the technology of biomedical coatings and materials, which provide a means to improve the wear of joints, change the biological interaction between implant and host and combine the properties of various materials to improve device performance. Coatings for biomedical applications provides an extensive review of coating types and surface modifications for biomedical applications.The first part of the book explores a range of coating types and their biomedical applications. Chapters look at hydrophilic, mineral and pyrolytic carbon coatings in and ex vivo orthopaedic applications and finally at surface modification and preparation techniques. Part two presents case studies of orthopaedic and ophthalmic coatings, and biomedical applications including vascular stents, cardiopulomonary by-pass equipment and ventricular assist devices.With its clear structure and comprehensive review of research, Coatings for biomedical applications is a valuable resource to researchers, scientists and engineers in the biomedical industry. It will also benefit anyone studying or working within the biomedical sector, particularly those specialising in biomedical coatings. - Provides an extensive review of coating types and surface modifications for biomedical applications - Chapters look at hydrophilic coatings for biomedical applications in and ex vivo, mineral coatings for orthopaedic applications, pyrolytic carbon coating and other commonly-used biomedical coatings - Presents case studies of orthopaedic and ophthalmic coatings, and biomedical applications including vascular stents, cardiopulomonary by-pass equipment and ventricular assist devices
