Download or read book Plasma Assisted Decontamination of Biological and Chemical Agents written by Selçuk Güçeri and published by Springer Science & Business Media. This book was released on 2011-10-12 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma decontamination is a rapidly expanding area of modern science and engineering. An increasing number of engineers are using plasma methods for decontamination of chemical and biological agents. Plasma decontamination is effectively applied today to clean and sterilize different surfaces, high volume air and water streams, industrial exhausts, and even living tissue of animals and humans. This book provides a fundamental introduction to virtually all aspects of modern plasma decontamination, as well as the most recent technological achievements in the area. The book is segmented into four specific sections of modern plasma decontamination: (1) plasma bio-decontamination, including disinfection and sterilization of surfaces, water and air streams; (2) plasma decontamination of chemical agents, including cleaning of air, water, and industrial exhaust gases from different pollutants and especially volatile organic compounds VOC; (3) plasma treatment of living tissue, including different subjects of plasma medicine from skin sterilization to tissue engineering; (4) major electric discharges applied for the plasma-assisted decontamination of chemical and biological agents.
Download or read book Plasma for Bio Decontamination Medicine and Food Security written by Zdenko Machala and published by Springer Science & Business Media. This book was released on 2012-02-05 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-thermal (cold) plasmas at atmospheric pressure have recently found many breakthrough applications in biology, medicine, and food security. Plasmas can efficiently kill bacteria, yeasts, moulds, spores, biofilms and other hazardous microorganisms, including potential bio-terrorism agents. They can be employed for bio-decontamination and sterilization of surfaces, medical instruments, water, air, food, even of living tissues without causing their damage. Direct or indirect plasma interaction with living cells of microorganisms or even humans enables novel bio-medical applications, e.g. treatment of skin diseases and ulcers. Plasma-enhanced blood coagulation coupled with its antiseptic properties proved success in wound healing and opens new possibilities in surgery, emergency medicine and military applications. Plasma treatment allows cell manipulations, their removal and targeted transfer into the injured area, which can accelerate wound healing. Plasma induced apoptosis (programmed cell death) of tumor cells brings forth a great potential for cancer treatment. Besides, plasma enables painless treatment of dental caries, root canal disinfection, and other dentistry applications. This book is a selection of reviewed manuscripts issuing from the NATO Advanced Research Workshop Plasma for bio-decontamination, medicine and food security held in Jasná, Slovakia, on 15-18 March 2011. It provides a comprehensive overview of the current knowledge and research activities focused at the plasma applications in areas such as bio-decontamination, water chemistry, effects on cells; biofilm inactivation, UV sterilization, and medicine, especially tissue treatment and wound healing, as well as dentistry and food security.
Download or read book Industrial Plasma Technology written by Yoshinobu Kawai and published by John Wiley & Sons. This book was released on 2010-04-26 with total page 467 pages. Available in PDF, EPUB and Kindle. Book excerpt: Clearly structured in five major sections on applications, this monograph covers such hot technologies as nanotechnology, solar cell technology, biomedical and clinical applications, and sustainability. Since the topic, applications and readers are highly interdisciplinary, the book bridges materials science, industrial chemistry, physics, and engineering -- making it a must-have for researchers in industry and academia, as well as those working in application-oriented plasma technology.
Download or read book Sterilization and Decontamination of Surfaces Contaminated With Biological and Chemical Warfare Agents Using Atmospheric Pressure Plasma Discharges written by and published by . This book was released on 1999 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt: Our Phase I effort was meant to demonstrate that an effective technology for rapid surface sterilization of biological contaminants and neutralization of chemical warfare agents could be developed based on the application of an atmospheric pressure plasma. We used both a DC corona and dielectric barrier discharge for the sterilization tests which were conducted on a variety of substrates including metals and chemically resistant fabrics. Medically accepted biological indicator spores (Bacillus subtilis var niger and Bacillus stearothermophilus) were used to determine the effectiveness of the plasma discharge. The chemical neutralization tests were conducted using a DC corona discharge on a metal substrate contaminated with either diisopropylmethyl phosphonate or dimethylmethyl phosphonate. These simulants are of similar chemical structure to classes of chemical warfare agents like GB and Sarin. Results include decomposition of the chemical agent simulants with decomposition by-products including water, acetic acid and gases like CO2; complete sterilization in 15 minutes of some substrates contaminated with up to 105 spores over about a 1 cm2 and the concentration of the model pathogens and the surface characteristics of the contaminated substrate affects the sterilization results. A rough surface with defects is difficult to completely sterilize on short time scales
Download or read book Plasma Physics and Engineering written by Alexander Fridman and published by CRC Press. This book was released on 2004-04-15 with total page 888 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasma engineering is a rapidly expanding area of science and technology with increasing numbers of engineers using plasma processes over a wide range of applications. An essential tool for understanding this dynamic field, Plasma Physics and Engineering provides a clear, fundamental introduction to virtually all aspects of modern plasma science and technology, including plasma chemistry and engineering, combustion, chemical physics, lasers, electronics, methods of material treatment, fuel conversion, and environmental control. The book contains an extensive database on plasma kinetics and thermodynamics, many helpful numerical formulas for practical calculations, and an array of problems and concept questions.
Download or read book Atmospheric pressure Plasma Decontamination sterilization Chamber written by and published by . This book was released on 2001 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: An atmospheric-pressure plasma decontamination/sterilization chamber is described. The apparatus is useful for decontaminating sensitive equipment and materials, such as electronics, optics and national treasures, which have been contaminated with chemical and/or biological warfare agents, such as anthrax, mustard blistering agent, VX nerve gas, and the like. There is currently no acceptable procedure for decontaminating such equipment. The apparatus may also be used for sterilization in the medical and food industries. Items to be decontaminated or sterilized are supported inside the chamber. Reactive gases containing atomic and metastable oxygen species are generated by an atmospheric-pressure plasma discharge in a He/O.sub. 2 mixture and directed into the region of these items resulting in chemical reaction between the reactive species and organic substances. This reaction typically kills and/or neutralizes the contamination without damaging most equipment and materials. The plasma gases are recirculated through a closed-loop system to minimize the loss of helium and the possibility of escape of aerosolized harmful substances.
Download or read book Guide for the Selection of Chemical and Biological Decontamination Equipment for Emergency First Responders written by and published by . This book was released on 2001 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plasma Medicine written by Alexander Fridman and published by John Wiley & Sons. This book was released on 2012-12-19 with total page 629 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text is suitable for researchers and graduate students of a ‘hot’ new topic in medical physics. Written by the world’s leading experts, this book aims to present recent developments in plasma medicine, both technological and scientific, reviewed in a fashion accessible to the highly interdisciplinary audience consisting of doctors, physicists, biologists, chemists and other scientists, university students and professors, engineers and medical practitioners. The book focuses on major topics and covers the physics required to develop novel plasma discharges relevant for medical applications, the medicine to apply the technology not only in-vitro but also in-vivo testing and the biology to understand complicated bio-chemical processes involved in plasma interaction with living tissues.
Download or read book Cost efficient Wastewater Treatment Technologies written by Mahmoud Nasr and published by Springer Nature. This book was released on 2023-01-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first of two volumes that together provide a comprehensive overview of the current sustainable and low-cost wastewater treatment technologies applied in communities that lack the financial and technical resources needed for an environmental, disease prevention and health nexus.This book reviews natural wastewater treatment technologies and traces the current challenges in wastewater management and sustainability. Divided into 4 themed parts, the chapters from expert contributors cover topics such as simplified and low-energy natural treatment facilities, bioremediation and biotechnology for green future, environmental impact assessment of wastewater reuse, wastewater management and sustainability for irrigation, high-performance and cost-effective biosorbents for heavy metals removal, and eco-friendly nanomaterials for wastewater environmental management. The readers will discover essential recommendations for improving natural treatment systems to withstand emerging contaminants, namely, endocrine disruption chemicals, surfactants, personal care products, pesticides, and pharmaceuticals. Readers will also find valuable guidelines to ensure sustainable and innovative solutions for wastewater treatment in the light of climate change, resource, demand, and funding challenges.Given the breadth and depth of its coverage, the book offers an invaluable source of information for researchers, students and environmental managers alike.
Download or read book Decontamination Using a One Atmosphere Uniform Glow Discharge Cold Plasma written by and published by . This book was released on 2002 with total page 29 pages. Available in PDF, EPUB and Kindle. Book excerpt: Atmospheric Glow Technologies is developing an innovative mobile atmospheric plasma decon system based upon the patented one atmosphere uniform glow discharge plasma (OAUGDP) technology. This advanced system will be a deployable military protection system that will decontaminate highly toxic chemicals and microorganisms on sensitive equipment, personnel protective equipment, and aircraft, vehicle, and shelter interiors. Phase I efforts demonstrated feasibility of the system in the neutralization of chemical warfare simulants (99.3% reduction). Phase II efforts will extend studies to biological warfare agents including spores, building upon the proven efficacy of the OAUGDP against a wide range of microorganisms. Future work will involve optimizing the system for recirculation of the airflow and air cooling. Studies are currently underway to determine the concentration of atmospheric plasma produced active species as well as the extent of chemical and biological degradation achieved. The system will also be tested for materials and device compatibility as well as neutralization studies of actual chemical and biological warfare agents.
Download or read book Plasma Cancer Therapy written by Michael Keidar and published by Springer Nature. This book was released on 2020-08-18 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, written by key researchers in the field, provides a comprehensive analysis and overview of the state of the art of plasma-based cancer therapy. Recent progress in atmospheric plasmas has led to non-thermal or cold atmospheric plasma (CAP) devices with ion temperatures close to room temperature. In contrast to many existing anti-cancer approaches, CAP is a selective anti-cancer modality which has demonstrated significant potential in cancer therapy. Written by a global, cross-disciplinary group of leading researchers, this book covers basic theory, generation, diagnostics, and simulation of cold atmospheric plasma, as well as their clinical application in cancer therapy, immunotherapy, and future outlook, giving a complete picture of the field. It is meant for a broad audience, from students to engineers and scientists, who are interested in the emerging world of plasma medical applications. It presents recent advances, primary challenges, and future directions of this exciting, cutting-edge field.
Download or read book Encyclopedia of Plasma Technology Two Volume Set written by J. Leon Shohet and published by CRC Press. This book was released on 2016-12-12 with total page 3082 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technical plasmas have a wide range of industrial applications. The Encyclopedia of Plasma Technology covers all aspects of plasma technology from the fundamentals to a range of applications across a large number of industries and disciplines. Topics covered include nanotechnology, solar cell technology, biomedical and clinical applications, electronic materials, sustainability, and clean technologies. The book bridges materials science, industrial chemistry, physics, and engineering, making it a must have for researchers in industry and academia, as well as those working on application-oriented plasma technologies. Also Available Online This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including: Citation tracking and alerts Active reference linking Saved searches and marked lists HTML and PDF format options Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages. US: (Tel) 1.888.318.2367; (E-mail) [email protected] International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]
Download or read book CVD Polymers written by Karen K. Gleason and published by John Wiley & Sons. This book was released on 2015-03-05 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: The method of CVD (chemical vapor deposition) is a versatile technique to fabricate high-quality thin films and structured surfaces in the nanometer regime from the vapor phase. Already widely used for the deposition of inorganic materials in the semiconductor industry, CVD has become the method of choice in many applications to process polymers as well. This highly scalable technique allows for synthesizing high-purity, defect-free films and for systematically tuning their chemical, mechanical and physical properties. In addition, vapor phase processing is critical for the deposition of insoluble materials including fluoropolymers, electrically conductive polymers, and highly crosslinked organic networks. Furthermore, CVD enables the coating of substrates which would otherwise dissolve or swell upon exposure to solvents. The scope of the book encompasses CVD polymerization processes which directly translate the chemical mechanisms of traditional polymer synthesis and organic synthesis in homogeneous liquids into heterogeneous processes for the modification of solid surfaces. The book is structured into four parts, complemented by an introductory overview of the diverse process strategies for CVD of polymeric materials. The first part on the fundamentals of CVD polymers is followed by a detailed coverage of the materials chemistry of CVD polymers, including the main synthesis mechanisms and the resultant classes of materials. The third part focuses on the applications of these materials such as membrane modification and device fabrication. The final part discusses the potential for scale-up and commercialization of CVD polymers.
Download or read book Worldwide Research Efforts in the Fighting Against Microbial Pathogensfrom Basic Research to Technological Developments written by A. Mendez-Vilas and published by Universal-Publishers. This book was released on 2013-06 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book aims to disseminate recent findings in the fight against microbial pathogens which were presented at the second edition of the ICAR Conference Series (ICAR2012) on Antimicrobial Research, held in Lisbon, Portugal, November 2012, which attracted about 425 scientists from 55 countries. This forum was the natural continuation of this new series of conferences: the first edition, held in Valladolid, Spain in 2010, gathered more than 500 researchers from nearly 60 countries. ICAR aims at establishing itself as a key forum in Europe for the presentation, exchange, and dissemination of information and experiences on anti-microbe strategies. "Anti" is here taken in the broadest sense as "against cell cycle, adhesion, or communication," when harmful for the human health, industry or economy (e.g. infectious diseases, chemotherapy, food, biomedicine, agriculture, livestock, biotechnology, water systems). Topics on antimicrobial natural products, antimicrobial resistance, antimicrobial surfaces, as well as methods and techniques, are included. This volume is a compilation of chapters written by active researchers that will provide readers with an up-to-date information about the current knowledge on antimicrobials in a worldwide context marked by the threat posed by the increasing antimicrobial resistance of microbial pathogens.
Download or read book Pulsed Discharge Plasmas written by Tao Shao and published by Springer Nature. This book was released on 2023-07-14 with total page 1028 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the latest progress in pulsed discharge plasmas presented by front-line researchers worldwide. The science and technology surrounding pulsed discharge plasmas is advanced through a wide scope of interdisciplinary studies into pulsed power and plasma physics. Pulsed discharge plasmas with high-power density, high E/N and high-energy electrons can effectively generate highly reactive plasma. Related applications have gathered strong interests in various fields. With contributions from global scientists, the book elaborates on the theories, numerical simulations, diagnostic methods, discharge characteristics and application technologies of pulsed discharge plasmas. The book is divided into three parts with a total of 35 chapters, including 11 chapters on pulsed discharge generation and mechanism, 12 chapters on pulsed discharge characterization and 12 chapters on pulsed discharge applications (wastewater treatments, biomedicine, surface modification, and energy conversion, etc). The book is a must-have reference for researchers and engineers in related fields and graduate students interested in the subject.
Download or read book Non Thermal Plasma Decontamination Technology for Forward Deployed Forces written by and published by . This book was released on 2004 with total page 2 pages. Available in PDF, EPUB and Kindle. Book excerpt: Non-thermal plasma processing is an emerging advanced oxidation technology for oxidation of hazardous microorganisms and compounds at low temperature. The plasma generated during an electrical discharge or when an energetic particle beam is injected into air produces copious free radicals. These free radicals are utilized in the chemical reactions, which normally would require very high temperature. Neutralization of chemical and biological warfare simulant agents deposited on surfaces was tested using non-thermal plasma source developed by Super Pulse. The surfaces tested varied from plastics to metal. The results show that the non-thermal plasma produced by the developed source is a very effective oxidizer.
Download or read book Skin Decontamination written by Hanjiang Zhu and published by Springer Nature. This book was released on 2019-09-26 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The skin is the first line of defense against chemical warfare agents including nerve agents and toxic industrial chemicals, providing a possible barrier or delay to systemic distribution. However, some chemicals act directly on the skin including vesicants sulfur mustard and corrosive compounds such as strong acids or bases, and do not have to gain access to systemic circulation to cause extensive skin damage. Early and rapid skin decontamination is extremely important following exposure to chemical warfare agents and toxic industrial chemicals because it decreases serious skin damage to the patient and, potentially, their doctor. This multi-authored international text pulls together a century of decontamination research and helps the reader expedite solutions that will decrease morbidity and mortality. Complete with dozens of hiqh quality photographs and illustrations, Skin Decontamination aids industrial hygiene, dermatology, occupational physicians and those involved in the public health arena.