Download or read book Planning Estimating and Control of Chemical Construction Projects written by Pablo F. Navarrete and published by CRC Press. This book was released on 2001-01-23 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains added chapters emphasizing the importance of choosing the correct project and defining project goals. Stresses the need for adequate front end loading (FEL) and outlines the responsibility of the venture manager in project selection. Provides updated case studies and examples on technical evaluation criteria, construction progress monitori

Download or read book Planning Estimating and Control of Chemical Construction Projects Second Edition written by Pablo F. Navarrete and published by CRC Press. This book was released on 2001-01-23 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains added chapters emphasizing the importance of choosing the correct project and defining project goals. Stresses the need for adequate front end loading (FEL) and outlines the responsibility of the venture manager in project selection. Provides updated case studies and examples on technical evaluation criteria, construction progress monitoring, offshore estimating, and more. The authors discuss such topics as initial involvement and plan of action, process design, regulatory compliance, risk analysis, project execution plan/master project schedule, estimating, contracting, detailed engineering, procurement, construction management, project control, contracts administration, communications, and plant start-up.

Download or read book Project and Cost Engineers Handbook written by Kenneth K. Humphreys and published by CRC Press. This book was released on 2004-11-30 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Making the specifics of a complex concern accessible and its handling quite manageable, this fourth edition of the Project and Cost Engineers' Handbook examines the variables associated with international projects and project risk analysis. It provides instruction on contingency planning, delves into ethical considerations, considers the imp

Download or read book Value Engineering written by Del Younker and published by CRC Press. This book was released on 2003-05-14 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume aims to teach effective and practical techniques to improve the overall performance and outcome of design projects in various industries. It shows how to maximize budgets, reduce life cycle costs, improve project understanding and create better working relationships. It also features MS PowerPoint slides for class instruction.

Download or read book Project Control written by Wayne J. Del Pico and published by John Wiley & Sons. This book was released on 2023-08-22 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: PROJECT CONTROL Reader-friendly, integrated approach to construction project cost and scheduling control, with all-new pedagogical elements The Second Edition of Project Control is an introductory practical guide that explores the reasons and methodologies for proper planning, monitoring, and controlling project costs and schedule and shows how productivity models are created, monitored, and controlled, as well as how corrective actions are implemented as deviations from the baseline occur. Project Control uses simple language to convey project control principles, making it an excellent resource to teach with and learn from in a classroom setting. This Second Edition has been updated with all-new pedagogical elements and ancillary materials for use in the construction project management classroom. This new edition features all-new sections on baseline scheduling, estimate development, probability analysis, and more. Written by Wayne Del Pico, a seasoned professional with over 40 years of experience in construction project controls, Project Control includes detailed information on: Role of the project manager, covering leading the project team, creating the project plan, developing the project schedule, and monitoring project progress over time Project control cycles, covering plans to achieve goals, executing work according to plan, identifying variations and their causes, and executive work and measure changes Pre-construction planning, covering key personnel and responsibilities and establishing baselines for schedule and cost control Budgeting, covering types of estimates, organization estimates, and harnessing the budget as a management tool Providing expert insight into the management skills of the project manager combined with the analytical focus of the accountant and the “big picture” oversight of the executive, Project Control is an essential resource for students in construction management programs and professionals in construction firms with specializations in long-term infrastructure projects.

Download or read book Effective Project Management Through Applied Cost and Schedule Control written by James Bent and published by CRC Press. This book was released on 1996-05-01 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work outlines a state-of-the-art project control and trending programme, focusing on advanced applied-cost and schedule-control skills for all phases of a project at both owner and contractor level. It contains information on the three major aspects of the total project programme: the techniques and procedures utilized for a project; the exper

Download or read book Applied Cost Engineering written by Forrest Clark and published by CRC Press. This book was released on 1996-11-05 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt: This thoroughly rewritten and updated third edition offers comprehensive coverage of cost engineering, emphasizing capital projects and focusing on both estimating and cost control. Maintaining and enhancing the style of presentation that made the previous editions so popular, Applied Cost Engineering, Third Edition furnishes an entirely new and co

Download or read book Engineering Economics and Economic Design for Process Engineers written by Thane Brown and published by CRC Press. This book was released on 2016-04-19 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineers often find themselves tasked with the difficult challenge of developing a design that is both technically and economically feasible. A sharply focused, how-to book, Engineering Economics and Economic Design for Process Engineers provides the tools and methods to resolve design and economic issues. It helps you integrate technical a

Download or read book Construction Management written by Daniel W. Halpin and published by John Wiley & Sons. This book was released on 2017-08-07 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: It’s often said that the construction professional has to be a “jack of all trades, and master of all.” This text covers a wide range of subjects, reflecting the breadth of knowledge needed to understand the dynamics of this large and complex industry. This edition includes updated chapters on planning and scheduling, a new chapter addressing linear scheduling methods, material regarding the historical background of construction as a profession, and includes an Instructor Resource of solutions to the end-of-chapter review exercises. This text has become a standard course text at many universities. The first four editions have enjoyed wide success as an introductory treatment of the subjects which are critical to success in the construction industry. This fifth edition preserves the features that have been most appreciated by its users throughout the years, and adds suggestions provided by instructors and students through formal surveys and informal feedback to the authors.

Download or read book 29th European Symposium on Computer Aided Chemical Engineering written by Anton A. Kiss and published by Elsevier. This book was released on 2019-07-03 with total page 1892 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 29th European Symposium on Computer Aided Process Engineering, contains the papers presented at the 29th European Symposium of Computer Aided Process Engineering (ESCAPE) event held in Eindhoven, The Netherlands, from June 16-19, 2019. It is a valuable resource for chemical engineers, chemical process engineers, researchers in industry and academia, students, and consultants for chemical industries. Presents findings and discussions from the 29th European Symposium of Computer Aided Process Engineering (ESCAPE) event

Download or read book Practice Standard for Project Estimating Second Edition written by Project Management Institute Project Management Institute and published by Project Management Institute. This book was released on 2020-04-24 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Project estimating plays a vital role in project management. Typically completed in the initial planning stages, accurate project estimation can be a difficult task. Organizations and project managers should use these initial estimates to baseline the project schedule and cost, then refine these estimates as the project develops. Accurate estimation and refinement of the estimates leads to better and earlier decision making, thus maximizing value.Developed within the framework of A Guide to the Project Management Body of Knowledge (PMBOK&® Guide) &– Sixth Edition and other PMI standards, the Practice Standard for Project Estimating &– Second Edition focuses on providing models for the project management profession in both plan-driven and change-driven adaptive (agile) life cycles. This practice standard describes the aspects of project estimating that are recognized as good practice on most projects most of the time and that are widely recognized and consistently applied.PMI practice standards describe processes, activities, constraints, inputs, and outputs for specific discipline subject areas and are targeted to all practitioners within projectized organizations, not just project managers.

Download or read book Methods in Sustainability Science written by Jingzheng Ren and published by Elsevier. This book was released on 2021-08-05 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Methods in Sustainability Science: Assessment, Prioritization, Improvement, Design and Optimization presents cutting edge, detailed methodologies needed to create sustainable growth in any field or industry, including life cycle assessments, building design, and energy systems. The book utilized a systematic structured approach to each of the methodologies described in an interdisciplinary way to ensure the methodologies are applicable in the real world, including case studies to demonstrate the methods. The chapters are written by a global team of authors in a variety of sustainability related fields. Methods in Sustainability Science: Assessment, Prioritization, Improvement, Design and Optimization will provide academics, researchers and practitioners in sustainability, especially environmental science and environmental engineering, with the most recent methodologies needed to maintain a sustainable future. It is also a necessary read for postgraduates in sustainability, as well as academics and researchers in energy and chemical engineering who need to ensure their industrial methodologies are sustainable. Provides a comprehensive overview of the most recent methodologies in sustainability assessment, prioritization, improvement, design and optimization Sections are organized in a systematic and logical way to clearly present the most recent methodologies for sustainability and the chapters utilize an interdisciplinary approach that covers all considerations of sustainability Includes detailed case studies demonstrating the efficacies of the described methods

Download or read book Financial Management and Accounting Fundamentals for Construction written by Daniel W. Halpin and published by John Wiley & Sons. This book was released on 2011-09-09 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: TECHNOLOGY/ENGINEERING/CIVIL SUCCESSFUL FINANCIAL MANAGEMENT IN THE CONSTRUCTION INDUSTRY BEGINS WITH THIS HANDS-ON GUIDE While construction professionals are skilled in the technical side of their work, they often find the financial management aspect of the business daunting. Financial Management and Accounting Fundamentals for Construction will help you better understand and navigate the financial decisions that are part of every construction project. This book is a compact summary of the basic financial skills that a construction professional must have to be successful in the management of a construction company and its projects. Its topics address many of the questions that any construction administrator will face, such as: How to organize and use a company's financial reports What amount of cash must be made available to the contractor to complete a project Why the early payment of supplier invoices can enhance profitability How to quantify the time value of money in financial decisions What tax amount is owed by a company and how it impacts the bottom line How to control project costs What financial sources are available to a construction contractor for capital expansion In this text, you will learn about accounting fundamentals, project-related financial matters, and company level financial issues three factors that are key to your career success. An ideal reference for students of construction management and engineering, as well as professionals who need a quick refresher when dealing with cost control analysis and other financial issues, this text also offers: Easy-to-understand coverage of financial concepts specific to the construction industry, including business taxation, project control, engineering economy, and financial forecasting Numerous worked examples, plus end-of-chapter review questions and exercises Helpful appendices that present the structure of a typical chart of accounts, the flow of transactions through a construction accounting system, and tables required for computing interest and the time value of money

Download or read book Project Management for Facility Constructions written by Alberto De Marco and published by Springer Science & Business Media. This book was released on 2011-03-23 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes concepts, methods and practical techniques for managing projects to develop constructed facilities in the fields of oil & gas, power, infrastructure, architecture and the commercial building industries. It is addressed to a broad range of professionals willing to improve their management skills and designed to help newcomers to the engineering and construction industry understand how to apply project management to field practice. Also, it makes project management disciplines accessible to experts in technical areas of engineering and construction. In education, this text is suitable for undergraduate and graduate classes in architecture, engineering and construction management, as well as for specialist and professional courses in project management.

Download or read book Project Estimating and Cost Management written by Parivs F. Rad PhD, PMP and published by Berrett-Koehler Publishers. This book was released on 2001-10-01 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt: Improve the accuracy of project estimates and make better in-progress modifications by following the discipline-independent approach mapped out in this book. Learn the best ways to apply new tools, including a breakdown structure for both work and resources and proven estimating models. In addition, you'll gain insights into best practices for progress monitoring and cost management, as well as for dealing effectively with external projects.

Download or read book Basic Cost Engineering written by Kenneth K. Humphreys and published by CRC Press. This book was released on 1995-09-05 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work focuses on the application of fundamental cost engineering principles to the capital and operating costs estimation of major projects. It provides detailed coverage of profitability, risk, and sensitivity analysis. This third edition: discusses novel strategies for calculating preliminary estimates using MasterFormat; presents new informa

Download or read book Construction Cost Engineering Handbook written by Anghel Patrascu and published by CRC Press. This book was released on 1988-03-30 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the basic and advanced aspects of engineering economics, cost estimating, cost control, cost forecasting, and planning and scheduling. It is intended for engineers, architects, and managers involved in or planning to be involved in engineering and construction projects.