Download or read book Pipelined Multiprocessor System on Chip for Multimedia written by Haris Javaid and published by Springer Science & Business Media. This book was released on 2013-11-26 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes analytical models and estimation methods to enhance performance estimation of pipelined multiprocessor systems-on-chip (MPSoCs). A framework is introduced for both design-time and run-time optimizations. For design space exploration, several algorithms are presented to minimize the area footprint of a pipelined MPSoC under a latency or a throughput constraint. A novel adaptive pipelined MPSoC architecture is described, where idle processors are transitioned into low-power states at run-time to reduce energy consumption. Multi-mode pipelined MPSoCs are introduced, where multiple pipelined MPSoCs optimized separately are merged into a single pipelined MPSoC, enabling further reduction of the area footprint by sharing the processors and communication buffers. Readers will benefit from the authors’ combined use of analytical models, estimation methods and exploration algorithms and will be enabled to explore billions of design points in a few minutes.
Download or read book Multiprocessor Systems on Chips written by Ahmed Jerraya and published by Morgan Kaufmann. This book was released on 2005 with total page 604 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern system-on-chip (SoC) design shows a clear trend toward integration of multiple processor cores on a single chip. Designing a multiprocessor system-on-chip (MPSOC) requires an understanding of the various design styles and techniques used in the multiprocessor. Understanding the application area of the MPSOC is also critical to making proper tradeoffs and design decisions. Multiprocessor Systems-on-Chips covers both design techniques and applications for MPSOCs. Design topics include multiprocessor architectures, processors, operating systems, compilers, methodologies, and synthesis algorithms, and application areas covered include telecommunications and multimedia. The majority of the chapters were collected from presentations made at the International Workshop on Application-Specific Multi-Processor SoC held over the past two years. The workshop assembled internationally recognized speakers on the range of topics relevant to MPSOCs. After having refined their material at the workshop, the speakers are now writing chapters and the editors are fashioning them into a unified book by making connections between chapters and developing common terminology. *Examines several different architectures and the constraints imposed on them *Discusses scheduling, real-time operating systems, and compilers *Analyzes design trade-off and decisions in telecommunications and multimedia applications
Download or read book Customizable Embedded Processors written by Paolo Ienne and published by Elsevier. This book was released on 2006-08-30 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Customizable processors have been described as the next natural step in the evolution of the microprocessor business: a step in the life of a new technology where top performance alone is no longer sufficient to guarantee market success. Other factors become fundamental, such as time to market, convenience, energy efficiency, and ease of customization. This book is the first to explore comprehensively one of the most fundamental trends which emerged in the last decade: to treat processors not as rigid, fixed entities, which designers include "as is in their products; but rather, to build sound methodologies to tailor-fit processors to the specific needs of such products. This book addresses the goal of maintaining a very large family of processors, with a wide range of features, at a cost comparable to that of maintaining a single processor. - First book to present comprehensively the major ASIP design methodologies and tools without any particular bias - Written by most of the pioneers and top international experts of this young domain - Unique mix of management perspective, technical detail, research outlook, and practical implementation
Download or read book Multimedia Multiprocessor Systems written by Akash Kumar and published by Springer Science & Business Media. This book was released on 2010-09-11 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern multimedia systems are becoming increasingly multiprocessor and heterogeneous to match the high performance and low power demands placed on them by the large number of applications. The concurrent execution of these applications causes interference and unpredictability in the performance of these systems. In Multimedia Multiprocessor Systems, an analysis mechanism is presented to accurately predict the performance of multiple applications executing concurrently. With high consumer demand the time-to-market has become significantly lower. To cope with the complexity in designing such systems, an automated design-flow is needed that can generate systems from a high-level architectural description such that they are not error-prone and consume less time. Such a design methodology is presented for multiple use-cases -- combinations of active applications. A resource manager is also presented to manage the various resources in the system, and to achieve the goals of performance prediction, admission control and budget enforcement.
Download or read book Integration of AI and OR Techniques in Constraint Programming for Combinatorial Optimization Problems written by Willem-Jan van Hoeve and published by Springer. This book was released on 2009-05-17 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the refereed proceedings of the 6th International Conference on Integration of AI and OR Techniques in Constraint Programming for Combinatorial Optimization Problems, CPAIOR 2009, held in Pittsburgh, PA, USA, in May 2009. The 20 revised full papers and 10 extended abstracts presented together with 2 invited talks were carefully reviewed and selected from 65 submissions. The papers describe current research in the fields of constraint programming, artificial intelligence, and operations research and present new techniques or new applications in combinatorial optimization, thus exploring ways of solving large-scale, practical optimization problems through integration and hybridization of the fields' different techniques.
Download or read book Mobile Secure and Programmable Networking written by Samia Bouzefrane and published by Springer Nature. This book was released on 2021-01-19 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the thoroughly refereed post-conference proceedings of the 6th International Conference on Mobile, Secure and Programmable Networking, held in Paris, France, in October 2020. The 16 full papers presented in this volume were carefully reviewed and selected from 31 submissions. They discuss new trends in networking infrastructures, security, services and applications while focusing on virtualization and cloud computing for networks, network programming, software defined networks (SDN) and their security.
Download or read book Pipelined Processor Farms written by Martin Fleury and published by John Wiley & Sons. This book was released on 2004-04-05 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book outlines a methodology for the use of parallel processing in real time systems. It provides an introduction to parallel processing in general, and to embedded systems in particular. Among the embedded systems are processors in such applications as automobiles, various machinery, IPGAs (field programmable gate arrays), multimedia embedded systems such as those used in the computer game industry, and more. * Presents design and simulation tools as well as case studies. * First presentation of this material in book form.
Download or read book Model Based Design for Embedded Systems written by Gabriela Nicolescu and published by CRC Press. This book was released on 2018-09-03 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: The demands of increasingly complex embedded systems and associated performance computations have resulted in the development of heterogeneous computing architectures that often integrate several types of processors, analog and digital electronic components, and mechanical and optical components—all on a single chip. As a result, now the most prominent challenge for the design automation community is to efficiently plan for such heterogeneity and to fully exploit its capabilities. A compilation of work from internationally renowned authors, Model-Based Design for Embedded Systems elaborates on related practices and addresses the main facets of heterogeneous model-based design for embedded systems, including the current state of the art, important challenges, and the latest trends. Focusing on computational models as the core design artifact, this book presents the cutting-edge results that have helped establish model-based design and continue to expand its parameters. The book is organized into three sections: Real-Time and Performance Analysis in Heterogeneous Embedded Systems, Design Tools and Methodology for Multiprocessor System-on-Chip, and Design Tools and Methodology for Multidomain Embedded Systems. The respective contributors share their considerable expertise on the automation of design refinement and how to relate properties throughout this refinement while enabling analytic and synthetic qualities. They focus on multi-core methodological issues, real-time analysis, and modeling and validation, taking into account how optical, electronic, and mechanical components often interface. Model-based design is emerging as a solution to bridge the gap between the availability of computational capabilities and our inability to make full use of them yet. This approach enables teams to start the design process using a high-level model that is gradually refined through abstraction levels to ultimately yield a prototype. When executed well, model-based design encourages enhanced performance and quicker time to market for a product. Illustrating a broad and diverse spectrum of applications such as in the automotive aerospace, health care, consumer electronics, this volume provides designers with practical, readily adaptable modeling solutions for their own practice.
Download or read book Parallel Computing Technologies written by Victor Malyshkin and published by Springer. This book was released on 2011-09-10 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes the proceedings of the 11th International Conference on Parallel Computing Technologies, PaCT 2011, held in Kazan, Russia on September 19-23, 2011. The 44 full papers presented together with 2 invited papers were carefully reviewed and selected from 68 submissions. The papers are organized in topical sections on models and languages, cellular automata, parallel programming tools and support, and applications.
Download or read book Advances in Recent Trends in Communication and Networks written by and published by Allied Publishers. This book was released on 2010 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Science ICCS 2008 written by Marian Bubak and published by Springer. This book was released on 2008-06-25 with total page 1070 pages. Available in PDF, EPUB and Kindle. Book excerpt: The three-volume set LNCS 5101-5103 constitutes the refereed proceedings of the 8th International Conference on Computational Science, ICCS 2008, held in Krakow, Poland in June 2008. The 167 revised papers of the main conference track presented together with the abstracts of 7 keynote talks and the 100 revised papers from 14 workshops were carefully reviewed and selected for inclusion in the three volumes. The main conference track was divided into approximately 20 parallel sessions addressing topics such as e-science applications and systems, scheduling and load balancing, software services and tools, new hardware and its applications, computer networks, simulation of complex systems, image processing and visualization, optimization techniques, numerical linear algebra, and numerical algorithms. The second volume contains workshop papers related to various computational research areas, e.g.: computer graphics and geometric modeling, simulation of multiphysics multiscale systems, computational chemistry and its applications, computational finance and business intelligence, physical, biological and social networks, geocomputation, and teaching computational science. The third volume is mostly related to computer science topics such as bioinformatics' challenges to computer science, tools for program development and analysis in computational science, software engineering for large-scale computing, collaborative and cooperative environments, applications of workflows in computational science, as well as intelligent agents and evolvable systems.
Download or read book Distributed Embedded Smart Cameras written by Christophe Bobda and published by Springer. This book was released on 2014-06-04 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication addresses distributed embedded smart cameras –cameras that perform on board analysis and collaborate with other cameras. This book provides the material required to better understand the architectural design challenges of embedded smart camera systems, the hardware/software ecosystem, the design approach for and applications of distributed smart cameras together with the state-of-the-art algorithms. The authors concentrate on the architecture, hardware/software design, realization of smart camera networks from applications to architectures, in particular in the embedded and mobile domains.
Download or read book Computational Science ICCS 2008 written by and published by Springer Science & Business Media. This book was released on 2008 with total page 1070 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechatronic System Control Logic and Data Acquisition written by Robert H. Bishop and published by CRC Press. This book was released on 2017-12-19 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first comprehensive and up-to-date reference on mechatronics, Robert Bishop's The Mechatronics Handbook was quickly embraced as the gold standard in the field. With updated coverage on all aspects of mechatronics, The Mechatronics Handbook, Second Edition is now available as a two-volume set. Each installment offers focused coverage of a particular area of mechatronics, supplying a convenient and flexible source of specific information. This seminal work is still the most exhaustive, state-of-the-art treatment of the field available. Focusing on the most rapidly changing areas of mechatronics, this book discusses signals and systems control, computers, logic systems, software, and data acquisition. It begins with coverage of the role of control and the role modeling in mechatronic design, setting the stage for the more fundamental discussions on signals and systems. The volume reflects the profound impact the development of not just the computer, but the microcomputer, embedded computers, and associated information technologies and software advances. The final sections explore issues surrounding computer software and data acquisition. Covers modern aspects of control design using optimization techniques from H2 theory Discusses the roles of adaptive and nonlinear control and neural networks and fuzzy systems Includes discussions of design optimization for mechatronic systems and real-time monitoring and control Focuses on computer hardware and associated issues of logic, communication, networking, architecture, fault analysis, embedded computers, and programmable logic controllers
Download or read book Embedded Systems written by Krzysztof Iniewski and published by John Wiley & Sons. This book was released on 2012-10-26 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covers the significant embedded computing technologies highlighting their applications in wireless communication and computing power An embedded system is a computer system designed for specific control functions within a larger system often with real-time computing constraints. It is embedded as part of a complete device often including hardware and mechanical parts. Presented in three parts, Embedded Systems: Hardware, Design, and Implementation provides readers with an immersive introduction to this rapidly growing segment of the computer industry. Acknowledging the fact that embedded systems control many of today's most common devices such as smart phones, PC tablets, as well as hardware embedded in cars, TVs, and even refrigerators and heating systems, the book starts with a basic introduction to embedded computing systems. It hones in on system-on-a-chip (SoC), multiprocessor system-on-chip (MPSoC), and network-on-chip (NoC). It then covers on-chip integration of software and custom hardware accelerators, as well as fabric flexibility, custom architectures, and the multiple I/O standards that facilitate PCB integration. Next, it focuses on the technologies associated with embedded computing systems, going over the basics of field-programmable gate array (FPGA), digital signal processing (DSP) and application-specific integrated circuit (ASIC) technology, architectural support for on-chip integration of custom accelerators with processors, and O/S support for these systems. Finally, it offers full details on architecture, testability, and computer-aided design (CAD) support for embedded systems, soft processors, heterogeneous resources, and on-chip storage before concluding with coverage of software support in particular, O/S Linux. Embedded Systems: Hardware, Design, and Implementation is an ideal book for design engineers looking to optimize and reduce the size and cost of embedded system products and increase their reliability and performance.
Download or read book Embedded Multiprocessors written by Sathya Sriram and published by CRC Press. This book was released on 2000-03-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Multiprocessors Scheduling and Synchronization Series Volume: 3 This item is part of the Signal Processing and Communications series. Application-specific, embedded multiprocessors are increasingly found today in high- performance communications and multimedia systems such as cellular phones and base stations, high-speed modems, set-top boxes, and switches in high-speed networks. Systematic design and analysis of such embedded multiprocessors is becoming a very important research area in industry and academia. This book focuses on the incorporation of interprocessor communication costs into multiprocessor scheduling decisions, modeling and analysis of multiprocessor system performance, and the application of the synchronization graph model to the development of hardware and software that can significantly reduce interprocessor communication overhead. Embedded Multiprocessors is a one-of-a-kind single-source reference indispensable for electrical and electronics, computer, communications, signal processing, and microprocessing engineers, and upper-level undergraduate and graduate students in these disciplines.
Download or read book Optical Switching Networking and Computing for Multimedia Systems written by Mohsen Guizani and published by CRC Press. This book was released on 2002-05-15 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume reveals the latest research on commercial systems with up to 160 OC-48 channels, optical ATM switch architectures, optical multiprotocol lambda and label switching, synchronous optical networks and digital hierarchy, and the Internet Protocol layer. The text includes recent developments in the routing efficiency of multihop optical networks supported by wavelength division multiplexing (WDM) with limited wavelength conversion. It also explores different routing techniques in WDM networks for virtual topology mapping, wavelength routing and assignment, dynamic routing, QoS provisions, and multicasting. The book examines challenges facing carriers and service providers in expanding optical networking capabilities for the next generation Internet.
