Download or read book Physical Properties of Concrete and Concrete Constituents written by Jean-Pierre Ollivier and published by John Wiley & Sons. This book was released on 2012-12-17 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the rheological properties of fresh concrete, the hydration phenomenon of cement responsible for structuration, the relationship between the characteristics of the porous solid obtained and its mechanical performances or resistance to the aggressive penetration requires a complex knowledge of the physicochemistry of reactive porous materials. The development of simple formulation rules therefore requires the assimilation of this knowledge and a good command of the properties of these materials. The purpose of this book is to provide the mix designer with useful knowledge on granular materials and porous materials, which will enable the innovative design of concrete. Topics covered include the characterization of granular materials, the concepts of porosity and specific surface area, and the transport properties (diffusion and permeation) of concrete. Some of these topics are already covered in other general books dedicated to granular or porous materials. The objective here is to bring them together in one book by adapting them for use by concrete specialists. Applications in the form of exercises are offered at the end of each chapter to enable readers to assimilate the theoretical knowledge and to apply such knowledge to concrete problems encountered in civil engineering. Contents 1. Description of Granular Materials, Definitions. 2. Granulometry. 3. Specific Surface Area of Materials. 4. Voids in Granular Materials and the Arrangement of Grains. 5. Voids in Concrete. 6. The Fundamentals of Diffusion. 7. Permeability.
Download or read book Lea s Chemistry of Cement and Concrete written by Peter Hewlett and published by Elsevier. This book was released on 2003-11-12 with total page 1087 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lea's Chemistry of Cement and Concrete deals with the chemical and physical properties of cements and concretes and their relation to the practical problems that arise in manufacture and use. As such it is addressed not only to the chemist and those concerned with the science and technology of silicate materials, but also to those interested in the use of concrete in building and civil engineering construction. Much attention is given to the suitability of materials, to the conditions under which concrete can excel and those where it may deteriorate and to the precautionary or remedial measures that can be adopted. First published in 1935, this is the fourth edition and the first to appear since the death of Sir Frederick Lea, the original author. Over the life of the first three editions, this book has become the authority on its subject. The fourth edition is edited by Professor Peter C. Hewlett, Director of the British Board of Agrement and visiting Industrial Professor in the Department of Civil Engineering at the University of Dundee. Professor Hewlett has brought together a distinguished body of international contributors to produce an edition which is a worthy successor to the previous editions.
Download or read book Composition and properties of concrete written by George Earl Troxell and published by . This book was released on 1968 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Materials written by Sandor Popovics and published by William Andrew. This book was released on 2012-12-02 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an in-depth approach to concrete ingredients and their relationships to concrete by discussing their properties, pertinent test methods, specifications, proper use and selection, and solutions to problems in practice. The approach is practice oriented, and the book assists in the improved application of concrete through a thorough understanding of its ingredients. This is aided by the discussion of certain fundamental aspects and relationships in quantitative forms, and by also presenting the interpretation of research and experience. An extensive bibliography is included.The book is a current, organized summary of knowledge concerning concrete-making materials, which will enable the engineer/user to make the best possible product using these materials.
Download or read book Nonconventional Concrete Technologies written by Committee on Nonconventional Concrete Technologies for Renewal of the Highway Infrastructure and published by National Academies Press. This book was released on 1997-04-08 with total page 125 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nonconventional Concrete Technologies: Renewal of the Highway Infrastructure identifies research and development opportunities in innovative, nonconventional materials and processes that have the potential to accelerate the construction process, improve the durability of highway pavement and bridges, and enhance the serviceability and longevity of new construction under adverse conditions.
Download or read book Building Code Requirements for Structural Concrete ACI 318 08 and Commentary written by ACI Committee 318 and published by American Concrete Institute. This book was released on 2008 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The quality and testing of materials used in construction are covered by reference to the appropriate ASTM standard specifications. Welding of reinforcement is covered by reference to the appropriate AWS standard. Uses of the Code include adoption by reference in general building codes, and earlier editions have been widely used in this manner. The Code is written in a format that allows such reference without change to its language. Therefore, background details or suggestions for carrying out the requirements or intent of the Code portion cannot be included. The Commentary is provided for this purpose. Some of the considerations of the committee in developing the Code portion are discussed within the Commentary, with emphasis given to the explanation of new or revised provisions. Much of the research data referenced in preparing the Code is cited for the user desiring to study individual questions in greater detail. Other documents that provide suggestions for carrying out the requirements of the Code are also cited.
Download or read book Concrete Construction written by Akhtar Surahyo and published by Springer. This book was released on 2019-03-05 with total page 329 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a thorough and comprehensive update of the 2002 edition, that incorporates detailed references to the Canadian, American, and British (European) standards, contextualized by the author based on over 30 years of construction experience. In addition to updates to the core text, many new topics are presented in the second edition, including a chapter discussing the methods for achieving quality control and ensuring quality assurance in concrete construction. The book consists of two parts. The first part provides basic information about normal concrete, its grades used on sites and various kinds of modified concretes such as fiber- reinforced concrete, sulphur concrete, roller compacted concrete, high performance concrete, ultra- high performance concrete, and flowing concrete. . It further addresses physical properties of concrete and various types of Portland cement, blended cements, admixtures, additives including properties of aggregates and their influence. The second part of the book highlights the principal causes of concrete deterioration along with protective measures, resulting from incorrect selection of constituent materials, poor construction methods, external factors, chemical attack, corrosion problems, hot and cold weather effects, and the various errors in designing and detailing. Featuring an extensive bibliography of the highly adopted standards as well as manuals and journals critical to the construction industry at the end of each chapter, the volume offers readers an advanced understanding of the theory and practical application of concrete technology and international standards in North America and Britain. Addresses concrete technology as well as concrete construction practices, meeting national and international standards; Maximizes readers' understanding of the principal causes of concrete deterioration along with protective measures; Facilitates readers' grasp of different nomenclature used for the same materials in different parts of the world; Features suitable tables, charts, and diagrams that illustrate and organize useful information; Explains sustainable concrete doctrine and how to achieve it meeting green concrete / building requirements; Provides a glossary, conversion factors, and examples of concrete mix design. ·
Download or read book Portland Cement written by Leslie Struble and published by ICE Publishing. This book was released on 2011-04-15 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updated to reflect the latest BSI standards, this third edition gives an account of cement composition, manufacture, quality assessment, hydration and the resulting microstructure-physical property relationships, and some mechanisms of the chemical degradation of hardened cement paste.
Download or read book Cement and Concrete Chemistry written by Wieslaw Kurdowski and published by Springer Science & Business. This book was released on 2014-04-24 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph describes cement clinker formation. It covers multicomponent systems, clinker phase structures and their reactions with water, hydrate composition and structure, as well as their physical properties. The mineral additions to cement are described as are their influence on cement-paste properties. Special cements are also discussed. The microstructure of concrete is then presented, and special emphasis is given to the role of the interfacial transition zone, and the corrosion processes in the light of cement-phase composition, mineral additions and w/c ratio. The admixtures' role in modern concrete technology is described with an emphasis on superplasticizer chemistry and its cement-paste rheological modification mechanism. Cement with atypical properties, such as calcium aluminate, white, low energy and expansive cements are characterized. The last part of the book is devoted to special types of concrete such as self compacting and to reactive powders.
Download or read book Concrete Microstructure Properties and Materials written by P. Mehta and published by McGraw Hill Professional. This book was released on 2005-09-26 with total page 684 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents the art and science of concrete in a simple, clear, hands-on manner, focusing on the following: Cement and concrete are predicted to be the premier building material of the 21st Century; Includes unique diagrams, photographs, and summary tables; Updated to include new chapters on non-destructive methods for concrete; future challenges in concrete technology; an increased number of examples of concrete applications; and new developments in durability.
Download or read book Compressive Strength of Concrete written by Pavel Krivenko and published by BoD – Books on Demand. This book was released on 2020-03-11 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete made using mineral cements, the raw materials which on earth are practically endless, is known as one of the oldest building materials and during the last decades of the twentieth century has become a dominant building material for general use. At the same time, the requirements of the quality of concrete and its performance properties, in particular compressive strength, durability, economical efficiency, and low negative impact of its manufacture on the environment have not yet been completely met. Bearing these requirements in mind, researchers and engineers worldwide are working on how to satisfy these requirements. This book has been written by researchers and experts in the field and provides the state of the art on recent progress achieved on the properties of concrete, including concrete in which industrial by-products are utilized. The book is dedicated to graduate students, researchers, and practicing engineers in related fields.
Download or read book International Standards of Practice for Inspecting Commercial Properties written by Nick Gromicko and published by . This book was released on 2015-07-09 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Strength and Related Properties of Concrete written by Sándor Popovics and published by John Wiley & Sons. This book was released on 1998-03-23 with total page 558 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work discusses the variations that occur in the strength of concrete and presents numerical methods useful in interpreting these variations. Individual chapters include the relationship between composition and strength of concrete.
Download or read book Significance of Tests and Properties of Concrete and Concrete making Materials written by Joseph F. Lamond and published by ASTM International. This book was released on 2006 with total page 661 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Control of Concrete Mixtures written by Steven H. Kosmatka and published by . This book was released on 1988 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Portland Cement Association reference, dealing with fundamentals, cold weather concreting, curing, admixtures, aggregates, mixing, and much more.
Download or read book Portland Cement Paste and Concrete written by I. Soroka and published by Palgrave. This book was released on 2013-12-31 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Concrete Microstructure written by D. M. Roy and published by Strategic Highway Research Program (Shrp). This book was released on 1993 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Durability of concrete in highway systems is a problem of national concern. In order to better understand the mechanisms which intrinsically control durability in highway concrete, it is necessary to define and understand those factors which impact concrete microstructure which is a consequence of both its formulation and the processes taking place during mixing, placing and curing. This report documents an investigation of those variables which control cement hydration and consequent microstructural development.
