Download or read book Proceedings of the 3rd Conference on Physical Modeling for Virtual Manufacturing Systems and Processes written by Jan C. Aurich and published by Springer Nature. This book was released on 2023-07-10 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an open access book reporting the results of nine years research of the International Research Training Group (IRTG) 2057, funded by the German Research Foundation (DFG). The IRTG is a joint venture between the TU Kaiserslautern, the University of California Berkeley, and University of California Davis. The book is content-driven mainly by two disciplines: engineering and computer science. Through the application of scientific knowledge and advanced computer-based methods in conjunction with physical models on a level unrealized in the past, technologies and methods are promoted, which can be used for planning and optimization of manufacturing systems and processes. As a result, fundamental understanding as well as extensive systems, tools and computational algorithms, which significantly improve the integration of advanced computational methods for solving problems of manufacturing systems and processes will be available. This open access book is of interest to any researcher dealing with process and factory planning in manufacturing, like for cutting and additive manufacturing.

Download or read book Physical Modeling for Virtual Manufacturing Systems and Processes written by Jan C. Aurich and published by Trans Tech Publications Ltd. This book was released on 2017-08-30 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: International Research Training Group (IRTG) 2057 Selected, peer reviewed papers from the 1st Conference on Physical Modeling for Virtual Manufacturing Systems and Processes, June 8-9, 2017, Speyer, Germany

Download or read book Learning Factories written by Eberhard Abele and published by Springer. This book was released on 2018-10-10 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the state of the art of learning factories. It outlines the motivations, historic background, and the didactic foundations of learning factories. Definitions of the term learning factory and a corresponding morphological model are provided as well as a detailed overview of existing learning factory approaches in industry and academia, showing the broad range of different applications and varying contents. Learning factory best-practice examples are presented in detailed and structured manner. The state of the art of learning factories curricula design and their use to enhance learning and research as well as potentials and limitations are presented. Further research priorities and innovative learning factory concepts to overcome current barriers are offered. While today numerous learning factories have been built in industry (big automotive companies, pharma companies, etc.) and academia in the last decades, a comprehensive handbook for the scientific community and practitioners alike is still missing. The book addresses therefore both researchers in production-related areas, that want to conduct industry-relevant research and education, as well as managers and engineers in industry, who are searching for an effective way to train their employees. In addition to this, the learning factory concept is also regarded as an innovative learning concept in the field of didactics.

Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2016-11-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. - Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry - Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels - Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity

Download or read book Frontiers of Manufacturing Science and Measuring Technology II written by Wen Pei Sung and published by Trans Tech Publications Ltd. This book was released on 2012-04-12 with total page 1744 pages. Available in PDF, EPUB and Kindle. Book excerpt: Selected, peer reviewed papers from the 2012 2nd International Conference on Frontiers of Manufacturing Science and Measuring Technology (ICFMM 2012), June 12-13, 2012, Xi’An, China

Download or read book World Congress on Medical Physics and Biomedical Engineering 2018 written by Lenka Lhotska and published by Springer. This book was released on 2018-05-29 with total page 815 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book (vol. 3) presents the proceedings of the IUPESM World Congress on Biomedical Engineering and Medical Physics, a triennially organized joint meeting of medical physicists, biomedical engineers and adjoining health care professionals. Besides the purely scientific and technological topics, the 2018 Congress will also focus on other aspects of professional involvement in health care, such as education and training, accreditation and certification, health technology assessment and patient safety. The IUPESM meeting is an important forum for medical physicists and biomedical engineers in medicine and healthcare learn and share knowledge, and discuss the latest research outcomes and technological advancements as well as new ideas in both medical physics and biomedical engineering field.

Download or read book 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2015-07-14 with total page 2667 pages. Available in PDF, EPUB and Kindle. Book excerpt: 25th European Symposium on Computer-Aided Process Engineering contains the papers presented at the 12th Process Systems Engineering (PSE) and 25th European Society of Computer Aided Process Engineering (ESCAPE) Joint Event held in Copenhagen, Denmark, 31 May - 4 June 2015. The purpose of these series is to bring together the international community of researchers and engineers who are interested in computing-based methods in process engineering. This conference highlights the contributions of the PSE/CAPE community towards the sustainability of modern society. Contributors from academia and industry establish the core products of PSE/CAPE, define the new and changing scope of our results, and future challenges. Plenary and keynote lectures discuss real-world challenges (globalization, energy, environment, and health) and contribute to discussions on the widening scope of PSE/CAPE versus the consolidation of the core topics of PSE/CAPE. - Highlights how the Process Systems Engineering/Computer-Aided Process Engineering community contributes to the sustainability of modern society - Presents findings and discussions from both the 12th Process Systems Engineering (PSE) and 25th European Society of Computer-Aided Process Engineering (ESCAPE) Events - Establishes the core products of Process Systems Engineering/Computer Aided Process Engineering - Defines the future challenges of the Process Systems Engineering/Computer Aided Process Engineering community

Download or read book Advanced Control Strategies for Social and Economic Systems ACS 04 written by Peter Kopacek and published by Elsevier. This book was released on 2006-01-06 with total page 218 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Integrative Production Technology for High Wage Countries written by Christian Brecher and published by Springer Science & Business Media. This book was released on 2011-12-19 with total page 1118 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial production in high-wage countries like Germany is still at risk. Yet, there are many counter-examples in which producing companies dominate their competitors by not only compensating for their specific disadvantages in terms of factor costs (e.g. wages, energy, duties and taxes) but rather by minimising waste using synchronising integrativity as well as by obtaining superior adaptivity on alternating conditions. In order to respond to the issue of economic sustainability of industrial production in high-wage countries, the leading production engineering and material research scientists of RWTH Aachen University together with renowned companies have established the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”. This compendium comprises the cluster’s scientific results as well as a selection of business and technology cases, in which these results have been successfully implemented into industrial practice in close cooperation with more than 30 companies of the industrial production sector.

Download or read book Computer Aided and Integrated Manufacturing Systems Optimization methods written by Cornelius T. Leondes and published by World Scientific. This book was released on 2003 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene.The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved.

Download or read book Service Oriented Holonic and Multi agent Manufacturing Systems for Industry of the Future written by Theodor Borangiu and published by Springer Nature. This book was released on 2022-06-02 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume gathers the peer reviewed papers presented at the 11th edition of the International Workshop on Service-oriented, Holonic and Multi-Agent Manufacturing Systems for the Industry of the Future, SOHOMA’21, organized on 18-19 November, 2021 by the Arts et Métiers Institute of Technology of Cluny, France in collaboration with University Politehnica of Bucharest (the CIMR Research Centre in Computer Integrated Manufacturing and Robotics), Polytechnic University Hauts-de-France (the LAMIH Laboratory of Industrial and Human Automation Control, Mechanical Engineering and Computer Science) and Polytechnic Institute of Bragança (the CeDRI Research Centre in Digitalization and Intelligent Robotics).

Download or read book Computer Aided and Integrated Manufacturing Systems written by Cornelius T. Leondes and published by World Scientific. This book was released on 2003 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene. The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved. Contents: .: Optimal Dynamic Facility Design of Manufacturing Systems (T L Urban); Rapid Prototyping Technologies and Limitations (C K Chua & S M Chou); Visual Assessment of Free-Form Surfaces in CADCAM (R J Cripps & A A Ball); and other articles. Readership: Graduate students, academics, researchers, and industrialists in computer engineering, industrial engineering, mechanical engineering, systems engineering, artificial intelligence and operations management

Download or read book Towards Sustainable Customization Bridging Smart Products and Manufacturing Systems written by Ann-Louise Andersen and published by Springer Nature. This book was released on 2021-10-31 with total page 1054 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features state-of-the-art contributions from two well-established conferences: Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2020) and Mass Customization and Personalization Conference (MCPC2020). Together, they focus on the joint design, development, and management of products, production systems, and business for sustainable customization and personalization. The book covers a large range of topics within this domain, ranging from industrial success factors to original contributions within the field.

Download or read book Computer Aided And Integrated Manufacturing Systems A 5 volume Set Volume 3 Optimization Methods written by Cornelius T Leondes and published by World Scientific. This book was released on 2003-08-14 with total page 238 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an invaluable five-volume reference on the very broad and highly significant subject of computer aided and integrated manufacturing systems. It is a set of distinctly titled and well-harmonized volumes by leading experts on the international scene.The techniques and technologies used in computer aided and integrated manufacturing systems have produced, and will no doubt continue to produce, major annual improvements in productivity, which is defined as the goods and services produced from each hour of work. This publication deals particularly with more effective utilization of labor and capital, especially information technology systems. Together the five volumes treat comprehensively the major techniques and technologies that are involved.

Download or read book Enabling Manufacturing Competitiveness and Economic Sustainability written by Hoda A. ElMaraghy and published by Springer Science & Business Media. This book was released on 2011-09-29 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: The changing manufacturing environment requires more responsive and adaptable manufacturing systems. The theme of the 4th International Conference on Changeable, Agile, Reconfigurable and Virtual production (CARV2011) is “Enabling Manufacturing Competitiveness and Economic Sustainability”. Leading edge research and best implementation practices and experiences, which address these important issues and challenges, are presented. The proceedings include advances in manufacturing systems design, planning, evaluation, control and evolving paradigms such as mass customization, personalization, changeability, re-configurability and flexibility. New and important concepts such as the dynamic product families and platforms, co-evolution of products and systems, and methods for enhancing manufacturing systems’ economic sustainability and prolonging their life to produce more than one product generation are treated. Enablers of change in manufacturing systems, production volume and capability scalability and managing the volatility of markets, competition among global enterprises and the increasing complexity of products, manufacturing systems and management strategies are discussed. Industry challenges and future directions for research and development needed to help both practitioners and academicians are presented.

Download or read book IT and Manufacturing Partnerships written by Jimmie Browne and published by IOS Press. This book was released on 1996 with total page 318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theme of this book is the development of partnerships between manufacturing companies, their suppliers and customers and the facilitating of these partnerships by information technology and telecommunications. In the 1980s the emphasis in manufacturing was on integration 'within the four walls' of the manufacturing plant. The main issues facing researchers and industrial practitioners at the time were CAD/CAM integration, integration of production planning and control systems, the development of sophisticated computer driven manufacturing, assembly and testing systems and their control through sophisticated shop floor control systems. Today the emphasis has moved towards supply chain management (integration of the supply chain through Electronic Data Interchange (EDI) and Just in Time (JIT) or Quick Response approaches) and customer driven manufacturing. This includes the integration of manufacturing and distribution/logistics planning and control systems. Consequently, success for manufacturing companies in the 1990s requires closer collaboration with customers, suppliers and distributors than in the past. Information Technology and the emergence of a powerful global information infrastructure enable manufacturing industries throughout Europe to develop collaborative partnership across the value chain. Successful collaboration is achieved by the sharing of information at all phases of the business cycle, across the supply chain and across national and international boundaries. The need to collaborate across the supply chain has particular consequences for small and medium sized manufacturing (SMEs) companies, many of whom are compared and subassembly suppliers to the larger companies. Indeed the collaboration between supplier SMEs and their large customers has, in many cases, gone beyond JIT supply of components based on orders delivered, processed and frequently paid for using EDI technology and now extends to joint design and engineering activity. Collaboration between manufacturing companies across the supply chain is therefore placing increasing pressure on the developers of the global information superhighway and on the developers of CAD and other engineering software to ensure compliance with emerging standards, such as STEP, in order to allow intercompany collaboration. These are the issues which form the background of this book. The book is aimed at those researchers and industrial practitioners interested in learning about recent progress in manufacturing systems research and application. Mature results emerging from the ESPRIT-IiM programme are presented. Readers: Manufacturing managers an engineers, Quality/process engineers, IT suppliers/vendors, Academic researchers, Technology transfer centres and Industrial associations.

Download or read book Virtual Manufacturing written by Prashant Banerjee and published by John Wiley & Sons. This book was released on 2001-03-23 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title on virtual manufacturing features an integrated approach and coverage of practical applications. It links virtual reality and Web-based production to manufacturing. It covers not only the technology, but the integration of the topics and their applications to manufacturing.