Download or read book Physical Basis of Plasticity in Solids written by Jean-Claude Toldano and published by World Scientific. This book was released on 2012 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the physical mechanism of the plastic deformation of solids, which relies essentially on the occurrence and motion of dislocations. These are linear defects, specific of crystalline solids whose motion under external stresses explains the relative ease by which solids (metals in particular) can be deformed in order to give them desired shapes. The objective is to introduce the topic to undergraduate students, restricting to the main ideas and showing their relevance in interpreting phenomena well known to everyone (e.g. why are certain metals harder than others?), and finally training the students in the practice of calculating the simplest properties of dislocations.
Download or read book Large Deformations of Solids Physical Basis and Mathematical Modelling written by J. Gittus and published by Springer. This book was released on 1986 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Large Deformations of Solids Physical Basis and Mathematical Modelling written by J. Gittus and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Elasticity Plasticity and Structure of Matter written by R. Houwink and published by Cambridge University Press. This book was released on 1971-10-31 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: When this volume was first published in 1971, the science of deformation of materials, now usually known as rheology, had branched out into several new and significant areas of research. In particular, the search for compounds with specified desirable properties had produced synthetic materials of great technological importance. This third edition contains authoritative contributions from specialists in the various fields. The aim of the book was to draw together and discuss the problems of physicists, chemists and technologists, and the editors attempted, in so far as it was possible for a science in a state of growth, to trace a unity of thought THAT is seldom apparent in the literature of this subject. The early chapters deal with the physical principles of elasticity, plasticity and viscosity, and relate physical and chemical structure to rheological properties. Individual chapters later in the book contain comparative accounts of a wide range of materials, some naturally occurring and others man-made; the general theoretical laws of rheology are compared with experimental observations.
Download or read book Mechanics and Durability of Solids written by Franz-Josef Ulm and published by . This book was released on 2003 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intended for a first course in continuum mechanics and constitutive modeling at the senior undergraduate and the introductory graduate level, the focus of this book is on a unified "mechanistic" approach that uses energy concepts for modeling a large range of engineering material behavior. In the presentation, 1D-Think models lead to the development of various fundamentals of continuum mechanics, such as deformation and strain, momentum balance, stress and stress states, thermoelasticity and elasticity bounds, plasticity, and yield design. Along these lines, the bases for a common language among core disciplines in engineering sciences are developed, in a mathematical, yet eloquent manner. The textbook evolved from lecture notes of a one-semester course developed by the authors at the Massachusetts Institute of Technology, as well as in France, Germany, and Brazil. "Key Features of the Book" Parts I and II introduce the two pillars of continuum mechanics, strain and stresses, with a focus on geometrical and physical interpretation, starting with the finite deformation theory. Part III is dedicated to non-dissipative material behavior, with a focus on thermoelasticity and variational methods in elasticity, as well as to its application in heterogeneous material systems. Part IV starts with 1D-plasticity, introducing ideal plasticity, hardening plasticity, and associated energy transformations. It is within the energy approach that the 1D-Think models are extended to 3D, introducing the notion of associated and non-associated plasticity. Finally, the concept of plastic collapse is introduced, leading to the development of the upper- and lower-boundtheorems of limit analysis, which form the basis of modern yield design for engineering structures and material systems. The mathematical developments in each chapter are illustrated through a set of accompanying blackboard exercises of the subject matter, a Training Set for recitation, followed by a broad spectrum of worked exercises suitable for homework, classroom assignments, quizzes, or take-home examinations.
Download or read book Plasticity and failure behavior of solids written by George C. Sih and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than six years ago, several of Rabotnov's close friends and colleagues from the USSR and USA decided to contribute a volume on Plasticity and Failure of Solids in honor of his 70th birthday. The celebration was interrupted unexpectedly by his death on May 13, 1985 at which time another decision was made still to publish the work, but as a memorial volume. As in any field of scientific endeavor, research confronts the scientists with anomalies; our chosen area is no exception. The ways in which failure criteria and plasticity theory are combined can differ widely among the researchers; they will never yield quite the same results. Each of the invited contributors has, therefore, been encouraged to express his views and to expound on his personal opinion. The contributors are free of enumeration from the authority and/or consensus of any scientific society or community. What impedes scientific process is the esoteric tradition of accepting ideas and theories by consensus among members of societies and communities. The absence of such a trend is refreshing; the collaboration between the authors from the USSR and the USA had to be one of the contributing factors. Finally, the editors wish to acknowledge the authors who have made the publication of this volume possible. a. c. Sib S. T. Mileiko AJ. Ishlinsky xi The late Professor Yuriy Nickolaevich Rabotnov (February 24, 1914 - May 13, 1985) xii Scientific biography of the late academician Yu. N.
Download or read book Plasticity and Textures written by W. Gambin and published by Springer Science & Business Media. This book was released on 2001-12-31 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book unifies, for the first time in book form, the main concepts of the physical and mathematical theory of plasticity. It presents the foundations of modern anisotropic plasticity, which link microscopic observations of texture formation with macroscopic properties of plastically anisotropic materials. Progress in metal-forming technologies has created the necessity to express the plastic yield process in terms of mathematics in order to apply computer methods. In addition new materials used in structural elements require a more detailed description of their physical structure. Amongst both metallurgists and mechanical designers, a strong tendency exists to formulate the scientific material in a common language. This book meets this request, although it has no ambitions to summarise the existing state of knowledge, only to combine the mathematical and physical approaches. The book is mainly addressed to mechanical designers. It is written for researchers who have a knowledge of physics and who want a mathematical tool for using this knowledge for a better description of technological processes. Moreover, it will interest metallurgists who want to have a more general view of their field of research, as well as for mechanical and civil engineers who want to apply some microstructural knowledge in their work. It could also be useful for graduate students at post-doctorate level who want to enter the field of plastic deformation of polycrystalline metals with texture.
Download or read book Introduction to Mechanics of Solid Materials written by Lallit Anand and published by Oxford University Press. This book was released on 2022-10-31 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Mechanics of Solid Materials is concerned with the deformation, flow, and fracture of solid materials. This textbook offers a unified presentation of the major concepts in Solid Mechanics for junior/senior-level undergraduate students in the many branches of engineering - mechanical, materials, civil, and aeronautical engineering among others. The book begins by covering the basics of kinematics and strain, and stress and equilibrium, followed by a coverage of the small deformation theories for different types of material response: (i) Elasticity; (ii) Plasticity and Creep; (iii) Fracture and Fatigue; and (iv) Viscoelasticity. The book has additional chapters covering the important material classes of: (v) Rubber Elasticity, and (vi) Continuous-fiber laminated composites. The text includes numerous examples to aid the student. A substantial companion volume with example problems is available free of charge on the book's companion website.
Download or read book Plasticity and Creep of Metals written by Andrew Rusinko and published by Springer Science & Business Media. This book was released on 2011-07-24 with total page 442 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book serves both as a textbook and a scientific work. As a textbook, the work gives a clear, thorough and systematic presentation of the fundamental postulates, theorems and principles and their applications of the classical mathematical theories of plasticity and creep. In addition to the mathematical theories, the physical theory of plasticity, the book presents the Budiansky concept of slip and its modification by M. Leonov. Special attention is given to the analysis of the advantages and shortcomings of the classical theories. In its main part, the book presents the synthetic theory of irreversible deformations, which is based on the mathematical Sanders flow plasticity theory and the physical theory, the Budiansky concept of slip. The main peculiarity of the synthetic theory is that the formulae for both plastic and creep deformation, as well their interrelations, can be derived from the single constitutive equation. Furthermore, the synthetic theory, as physical one, can take into account the real processes that take place in solids at irreversible deformation. This widens considerably the potential of the synthetic theory. In the framework of the synthetic theory such problems as creep delay, the Hazen-Kelly effect, the deformation at the break of the load trajectory, the influence of the rate of loading on the stress-strain diagram, creep at the changes of load, creep at unloading and reversed creep, have been analytically described. In the last chapter, the book shows the solution of some contemporary problems of plasticity and creep: Creep deformation at cyclic abrupt changes of temperature, The influence of irradiation on the plastic and creep deformation, Peculiarities of deformation at the phase transformation of some metals.
Download or read book Basics of Continuum Plasticity written by Kwansoo Chung and published by Springer. This book was released on 2018-05-02 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the basic principles of plasticity for students and engineers who wish to perform plasticity analyses in their professional lives, and provides an introduction to the application of plasticity theories and basic continuum mechanics in metal forming processes. This book consists of three parts. The first part deals with the characteristics of plasticity and instability under simple tension or compression and plasticity in beam bending and torsion. The second part is designed to provide the basic principles of continuum mechanics, and the last part presents an extension of one-dimensional plasticity to general three-dimensional laws based on the fundamentals of continuum mechanics. Though most parts of the book are written in the context of general plasticity, the last two chapters are specifically devoted to sheet metal forming applications. The homework problems included are designed to reinforce understanding of the concepts involved. This book may be used as a textbook for a one semester course lasting fourteen weeks or longer. This book is intended to be self-sufficient such that readers can study it independently without taking another formal course. However, there are some prerequisites before starting this book, which include a course on engineering mathematics and an introductory course on solid mechanics.
Download or read book Physics Of Electrons In Solids written by Jean-claude Toledano and published by World Scientific. This book was released on 2021-06-02 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt: Primarily aiming to give undergraduate students an introduction to solid state physics, Physics of Electrons in Solids explains the properties of solids through the study of non-interacting electrons in solids. While each chapter contains a qualitative introduction to the main ideas behind solid state physics, it also provides detailed calculations of utmost importance to graduate students.The introductory chapters contain crystallographic and quantum prerequisites. The central chapters are devoted to the quantum states of an independent electron in a crystal and to the equilibrium properties of conductors, insulators, and semiconductors. The final chapters contain insights into the assumptions made throughout, briefly describing the origin of ferromagnetism and superconductivity. The book ends with exercises and solutions based on a physics course taught by the author at École Polytechnique.
Download or read book Engineering Plasticity written by C. R. Calladine and published by Elsevier. This book was released on 2016-10-13 with total page 333 pages. Available in PDF, EPUB and Kindle. Book excerpt: Engineering Plasticity focuses on certain features of the theory of plasticity that are particularly appropriate to engineering design. Topics covered range from specification of an ideal plastic material to the behavior of structures made of idealized elastic-plastic material, theorems of plastic theory, and rotating discs. Torsion, indentation problems, and slip-line fields are also discussed. This book consists of 12 chapters and begins by providing an engineering background for the theory of plasticity, with emphasis on the use of metals in structural engineering and the nature of physical theories. The reader is then introduced to the general problem of how to set up a model of the plastic behavior of metal for use in analysis and design of structures and forming processes, paying particular attention to the plastic deformation that occurs when a specimen of metal is stressed. Subsequent chapters explore the behavior of a simple structure made of elastic-plastic material; theorems of plastic theory; rotating discs; and indentation problems. Torsion, slip-line fields, and circular plates under transverse loading are also considered, along with wire-drawing and extrusion and the effects of changes in geometry on structure. This monograph is intended for students of engineering.
Download or read book Introduction to Finite Strain Theory for Continuum Elasto Plasticity written by Koichi Hashiguchi and published by John Wiley & Sons. This book was released on 2012-10-09 with total page 371 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive introduction to finite elastoplasticity, addressing various analytical and numerical analyses & including state-of-the-art theories Introduction to Finite Elastoplasticity presents introductory explanations that can be readily understood by readers with only a basic knowledge of elastoplasticity, showing physical backgrounds of concepts in detail and derivation processes of almost all equations. The authors address various analytical and numerical finite strain analyses, including new theories developed in recent years, and explain fundamentals including the push-forward and pull-back operations and the Lie derivatives of tensors. As a foundation to finite strain theory, the authors begin by addressing the advanced mathematical and physical properties of continuum mechanics. They progress to explain a finite elastoplastic constitutive model, discuss numerical issues on stress computation, implement the numerical algorithms for stress computation into large-deformation finite element analysis and illustrate several numerical examples of boundary-value problems. Programs for the stress computation of finite elastoplastic models explained in this book are included in an appendix, and the code can be downloaded from an accompanying website.
Download or read book Problems of Plasticity written by A. Sawczuk and published by Springer. This book was released on 2011-11-10 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: The theory of plasticity has a broad range of applications in industry and engineering. Its methods permit to devise metal processing, allow to assess safety of structures against collapse, make possible to estimate flow of bulk solids. The technological progress calls both for deeper understanding of sources of plastic deformation and for more rigorous description of mecha nisms of plastic motion. It was felt at the Institute of Fundamental Technological Research in Warsaw several years ago that an international meeting bringing together experts in various domains of plasticity and studying plastic behavior from different positions could be of use for further development of the discipline itself and for its service to society. The appropriate occasion for such a meeting sponsored by the Polish Academy of Sciences was provided by the 70th anniversary of Professor Wadaw Olszak. The idea of a fundamentals oriented symposium was favorably received by the scientific community over the world. Eminent scientists generously advised me as to the scope of the meeting and helped in shaping the program. It was eventually decided to concentrate the debates on a) physical foun dations of plasticity , b) thermodynamics of plastic and visco-plastic deform ation, c) experiments regarding plastic behavior, d) mathematical methods in plasticity, e) computer techniques suitable for solving important techno logical problems. The selection of papers was made accordingly. The symposium contributed papers were published in the volume entitled 'Foundations of plasticIty' and in the 'Archives of Mechanics' No.3, 1972.
Download or read book The Mathematical Theory of Plasticity written by Rodney Hill and published by Oxford University Press. This book was released on 1998 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: First published in 1950, this important and classic book presents a mathematical theory of plastic materials, written by one of the leading exponents.
Download or read book Elastoplasticity Theory written by Koichi Hashiguchi and published by Springer Science & Business Media. This book was released on 2013-07-16 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book was written to serve as the standard textbook of elastoplasticity for students, engineers and researchers in the field of applied mechanics. The present second edition is improved thoroughly from the first edition by selecting the standard theories from various formulations and models, which are required to study the essentials of elastoplasticity steadily and effectively and will remain universally in the history of elastoplasticity. It opens with an explanation of vector-tensor analysis and continuum mechanics as a foundation to study elastoplasticity theory, extending over various strain and stress tensors and their rates. Subsequently, constitutive equations of elastoplastic and viscoplastic deformations for monotonic, cyclic and non-proportional loading behavior in a general rate and their applications to metals and soils are described in detail, and constitutive equations of friction behavior between solids and its application to the prediction of stick-slip phenomena are delineated. In addition, the return-mapping algorithm, the consistent tangent operators and the objective time-integration algorithm of rate tensor are explained in order to enforce the FEM analyses. All the derivation processes and formulations of equations are described in detail without an abbreviation throughout the book. The distinguishable features and importance of this book is the comprehensive description of fundamental concepts and formulations including the objectivity of tensor and constitutive equations, the objective time-derivative of tensor functions, the associated flow rule, the loading criterion, the continuity and smoothness conditions and their substantial physical interpretations in addition to the wide classes of reversible/irreversible constitutive equations of solids and friction behavior between solids.
Download or read book Basic Engineering Plasticity written by David Rees and published by Elsevier. This book was released on 2012-12-02 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plasticity is concerned with understanding the behavior of metals and alloys when loaded beyond the elastic limit, whether as a result of being shaped or as they are employed for load bearing structures. Basic Engineering Plasticity delivers a comprehensive and accessible introduction to the theories of plasticity. It draws upon numerical techniques and theoretical developments to support detailed examples of the application of plasticity theory. This blend of topics and supporting textbook features ensure that this introduction to the science of plasticity will be valuable for a wide range of mechanical and manufacturing engineering students and professionals. Brings together the elements of the mechanics of plasticity most pertinent to engineers, at both the micro- and macro-levels Covers the theory and application of topics such as Limit Analysis, Slip Line Field theory, Crystal Plasticity, Sheet and Bulk Metal Forming, as well as the use of Finite Element Analysis Clear and well-organized with extensive worked engineering application examples, and end of chapter exercises
