Download or read book Processes in Photoreactive Polymers written by V.V. Krongauz and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of photosensitive materials in general and photoreactive polymers in particular is responsible for major advances in the information, imaging, and electronic industries. Computer parts manufacturing, information storage, and book and magazine publishing all depend on photoreactive polymer systems. The photo-and radiation-induced processes in polymers are also active areas of research. New information on the preparation and properties of com mercially available photosensitive systems is constantly being acquired. The recent demand for environmentally safe solvent-free and water-soluble materials also motivated changes in the composition of photopolymers and photoresists. The interest in holographic recording media for head-up displays, light scanners, and data recording stimulated development of reconfigurable and visible light sensitive materials. Photoconductive polymerizable coatings are being tested in electrostatic proofing and color printing. The list of available initiators, poly meric binders, and other coating ingredients is continually evolving to respond to the requirements of low component loss (low diffusivity) and the high rate of photochemical reactions.
Download or read book Photoreactive Polymers written by Arnost Reiser and published by Wiley-Interscience. This book was released on 1989 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive introduction to the theory & applications of resists. Discusses applications of polymers in the imaging industry, especially printing, & the fabrication of solid-state electronic devices. Reviews resist systems in the order in which they made their appearance & incorporates background material on the necessary photophysics, radiation chemistry, & image science.
Download or read book Photochemistry for Biomedical Applications written by Yoshihiro Ito and published by Springer. This book was released on 2018-06-21 with total page 313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes medical applications of photochemistry. In the first part, a general introduction to photochemistry and related phototechnologies is provided. In the second part, photochemistry-based medical applications for diagnostics (biochips and bioimaging) and therapeutics (biomaterials for artificial organs, medical adhesives, dental materials, drug-delivery systems, tissue engineering, and photodynamic therapy) are described, with examples of recent research. The year 2015 is the International Year of Light and Light-Based Technologies. Light plays a vital role in our daily lives and is important in many interdisciplinary scientific fields in the twenty-first century. Light-based concepts have revolutionized medicine, including areas such as oncology, molecular biology, and surgery. Although photochemistry has contributed significantly to medicine directly and through photochemical fabrication of biomaterials, a book giving a comprehensive overview of recent progress has not been published until now. The aim of this book is to highlight the contributions of photochemistry in interdisciplinary fields of chemistry and medical engineering. This book will be useful for chemists who are interested in medical applications of photochemistry and engineers who are eager to learn the principles of photochemistry to enable its use in practical applications.
Download or read book Photochemical Processes in Polymer Chemistry 2 written by G. Smets and published by Elsevier. This book was released on 2013-10-22 with total page 143 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photochemical Processes in Polymer Chemistry-2 contains invited lectures presented at the Second IUPAC Symposium on Photochemical Processes in Polymer Chemistry held at Leuven, Belgium on June 2-4, 1976. This book contains 11 papers separated as chapters. Topics include energy transfer processes; photoinitiation of polymerization; solid-state polymerization mechanisms; photoinduced ionic polymerizations; and photoconductive polymers. This text also discusses energy transfer phenomena in high polymer systems; laser spectroscopical methods for the study of primary processes during the photodegradation; photooxidation of high polymers; and reaction selectivity and molecular association in photochemical reactions of nucleic acids and their constituents. New developments in photochromic polymers and related phenomena, as well as the design of photoreactive polymer systems for imaging processes are also explained.
Download or read book Surface Modification of Polymers written by Jean Pinson and published by John Wiley & Sons. This book was released on 2020-02-18 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to modifying and functionalizing the surfaces of polymers Surface Modification of Polymers is an essential guide to the myriad methods that can be employed to modify and functionalize the surfaces of polymers. The functionalization of polymer surfaces is often required for applications in sensors, membranes, medicinal devices, and others. The contributors?noted experts on the topic?describe the polymer surface in detail and discuss the internal and external factors that influence surface properties. This comprehensive guide to the most important methods for the introduction of new functionalities is an authoritative resource for everyone working in the field. This book explores many applications, including the plasma polymerization technique, organic surface functionalization by initiated chemical vapor deposition, photoinduced functionalization on polymer surfaces, functionalization of polymers by hydrolysis, aminolysis, reduction, oxidation, surface modification of nanoparticles, and many more. Inside, readers will find information on various applications in the biomedical field, food science, and membrane science. This important book: -Offers a range of polymer functionalization methods for biomedical applications, water filtration membranes, and food science -Contains discussions of the key surface modification methods, including plasma and chemical techniques, as well as applications for nanotechnology, environmental filtration, food science, and biomedicine -Includes contributions from a team of international renowned experts Written for polymer chemists, materials scientists, plasma physicists, analytical chemists, surface physicists, and surface chemists, Surface Modification of Polymers offers a comprehensive and application-oriented review of the important functionalization methods with a special focus on biomedical applications, membrane science, and food science.
Download or read book Photocured Materials written by Atul Tiwari and published by Royal Society of Chemistry. This book was released on 2014-11-24 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, most synthetically developed materials are hardened by heating them to an elevated temperature, a process requiring large amounts of energy and space. Interest in photo cured materials using UV-light is growing due to simplifications in manufacturing and growing environmental concerns; it is expected photocuring could reduce electricity consumption by 90% compared to traditional curing. Photocured materials also reduce evaporation of volatile organic components, curing time and waste, thereby enhancing productivity and reducing work space. The materials technologies based on photocuring are gaining momentum, and this will be the first book to provide an in-depth focus on the subject. This book summarises the fundamentals required to understand the field, characterises the use of novel materials and the development of synthetic aspects, and discusses the future of the technology. The comprehensive review chapters are suitable for a broad readership from diverse backgrounds including chemistry, physics, materials science and engineering, medical science, pharmacy, biotechnology and biomedical engineering. Photocured Materials will be of interest to students, researchers, scientists, engineers and professors.
Download or read book Small Organic Molecules on Surfaces written by Helmut Sitter and published by Springer Science & Business Media. This book was released on 2013-02-19 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with basic aspects of polymer electronics and optoelectronics. There is an enormous world-wide effort both in basic scientific research as well as in industrial development in the area of organic electronics. It is becoming increasingly clear that, if devices based on organic materials are ever going to have a significant relevance beyond being a cheap replacement for inorganic semiconductors, there will be a need to understand interface formation, film growth and functionality. A control of these aspects will allow the realisation of totally new device concepts exploiting the enormous flexibility inherent in organic chemistry. In this book we focus on oligomeric/molecular films as we believe that the control of molecular structures and interfaces provides highly defined systems which allow, on the one hand the study of the basic physics and on the other hand to find the important parameters necessary to improve organic devices.
Download or read book Contact Angle Wettability and Adhesion written by K. L. Mittal and published by BRILL. This book was released on 2008-08-31 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume chronicles the proceedings of the "5th International Symposium on Contact Angle, Wettability and Adhesion" Toronto, Canada, June 2006. Wettability is of pivotal importance in many and varied arenas, ranging from mundane to micro-and nanofluidics to lithography to biomedical. It should be underscored that in the last years there has been burgeoning interest in replicating the so-called a oeLotus Leaf Effecta to create superhydrophobic surfaces. This volume contains a total of 19 papers covering many facets of contact angle, wettability and adhesion. All manuscripts were rigorously peer-reviewed and revised and edited before inclusion in this book. Concomitantly, this volume represents an archival publication of the highest standard. This book (5th volume in the series) is divided into three parts: Part 1: Contact Angle Measurements and Solid Surface Free Energy; Part 2: Relevance of Wetting in Cleaning and Adhesion; Part 3: Superhydrophobic Surfaces. The topics covered include: Fundamental aspects of contact angle and its measurement; solidification contact angles of micro-droplets; microscopic wettability of wood call walls; dynamic vapor-liquid interfacial tension; surface free energy of polymeric materials; surface cleanliness evaluation from wettability measurements; wettability parameters affecting surface cleanability of stainless steel and textiles; wetting and adhesion in fibrous materials; wettability and adhesion of coatings; adhesion of hydrophobizing agents; modulation of surface properties of polymers; graft efficiency and adhesion; relevance of interfacial free energy in cell adhesion; various approaches to create superhydrophobic surfaces; adsorption of surfactants on hydrophobic and superhydrophobic surfaces.
Download or read book Alkadienes Advances in Research and Application 2013 Edition written by and published by ScholarlyEditions. This book was released on 2013-06-21 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: Alkadienes—Advances in Research and Application: 2013 Edition is a ScholarlyBrief™ that delivers timely, authoritative, comprehensive, and specialized information about ZZZAdditional Research in a concise format. The editors have built Alkadienes—Advances in Research and Application: 2013 Edition on the vast information databases of ScholarlyNews.™ You can expect the information about ZZZAdditional Research in this book to be deeper than what you can access anywhere else, as well as consistently reliable, authoritative, informed, and relevant. The content of Alkadienes—Advances in Research and Application: 2013 Edition has been produced by the world’s leading scientists, engineers, analysts, research institutions, and companies. All of the content is from peer-reviewed sources, and all of it is written, assembled, and edited by the editors at ScholarlyEditions™ and available exclusively from us. You now have a source you can cite with authority, confidence, and credibility. More information is available at http://www.ScholarlyEditions.com/.
Download or read book Polymers and Electromagnetic Radiation written by Wolfram Schnabel and published by John Wiley & Sons. This book was released on 2014-01-10 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book to cover the interaction of polymers with radiation from the entire electromagnetic spectrum adopts a multidisciplinary approach to bridge polymer chemistry and physics, photochemistry, photophysics and materials science. The text is equally unique in its scope, devoting equal amounts of attention to the three aspects of synthesis, characterization, and applications. The first part deals with the interaction of polymers with non-ionizing radiation in the frequency-range from sub-terahertz via infrared radiation to visible and ultraviolet light, while the second covers interaction with ionizing radiation from the extreme ultraviolet to ?-ray photons. The result is a systematic overview of how both types of radiation can be used for different polymerization approaches, spectroscopy methods and lithography techniques. Authored by a world-renowned researcher and teacher with over 40 years of experience in the field, this is a highly practical and authoritative guide.
Download or read book Library of Congress Subject Headings written by Library of Congress and published by . This book was released on 2013 with total page 1640 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Library of Congress Subject Headings written by Library of Congress. Cataloging Policy and Support Office and published by . This book was released on 2009 with total page 1596 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Polymers and Light written by Wolfram Schnabel and published by John Wiley & Sons. This book was released on 2007-06-27 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: This first book to focus on the important and topical effect of light on polymeric materials reflects the multidisciplinary nature of the topic, building a bridge between polymer chemistry and physics, photochemistry and photophysics, and materials science. Written by one experienced author, a consistent approach is maintained throughout, covering such applications as nonlinear optical materials, core materials for optical waveguides, photoresists in the production of computer chips, photoswitches and optical memories. Advanced reading for polymer, physical and organic chemists, manufacturers of optoelectronic devices, chemical engineers, and materials scientists.
Download or read book Cross Linked Liquid Crystalline Systems written by Dirk Broer and published by CRC Press. This book was released on 2011-01-24 with total page 632 pages. Available in PDF, EPUB and Kindle. Book excerpt: Liquid crystal displays were discovered in the 1960s, and today we continue to enjoy the benefits of that fundamental discovery and its translation into a wide variety of products. Like liquid crystals, polymers are unusual materials, and have similarly enjoyed a great deal of research attention because of their vast applications and uses and compl
Download or read book Biomimetics written by Murugan Ramalingam and published by John Wiley & Sons. This book was released on 2013-08-01 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides cutting-edge advances in biologically inspired, biomimetically-designed materials and systems for developing the next generation of nanobiomaterials and tissue engineering Humans have been trying to learn biomimetics for centuries by mimicking nature and its behaviors and processes in order to develop novel materials, structures, devices, and technologies. The most substantial benefits of biomimetics will likely be in human medical applications, such as developing bioprosthetics that mimic real limbs and sensor-based biochips that interface with the human brain to assist in hearing and sight. Biomimetics: Advancing Nanobiomaterials and Tissue Engineering seeks to compile all aspects of biomimetics, from fundamental principles to current technological advances, along with future trends in the development of nanoscale biomaterials and tissue engineering. The book details research, useful in inspiring new ideas, that seeks the principles and rules implemented by nature, such as self-assembly, a bottom-up approach in which molecular structures are assembled with little or no external intervention to generate nano, micro, and macro structures. Other subjects covered in the book include: Cartilage tissue engineering as an emerging technology The fabrication methods of nanofibrous scaffolds and their potential utility in bone tissue engineering applications Dental and craniofacial tissue engineering with bioactive polymers and bionanomaterials Strategies to prevent bacterial adhesion on biomaterials The latest achievements in biomimetic ECM scaffolds prepared from cultured cells Graphene oxide and graphene as promising scaffold materials Stem cells as a source for building tissues or organs in the laboratory
Download or read book Advancement in Polymer Based Membranes for Water Remediation written by Sanjay K. Nayak and published by Elsevier. This book was released on 2022-02-23 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advancements in Polymer-Based Membranes for Water Remediation describes the advanced membrane science and engineering behind the separation processes within the domain of polymer-based membrane systems in water remediation. Emphasis has been put on several aspects, ranging from fundamental concepts to the commercialization of pressure and potential driven membranes, updated with the latest technological progresses, and relevant polymer materials and application potential towards water treatment systems. Also included in this book are advances in polymers for membrane application in reverse osmosis, nanofiltration, ultrafiltration, microfiltration, forward osmosis, and polymeric ion-exchange membranes for electrodialysis and capacitive deionization. With its critical analyzes and opinions from experts around the world, this book will garner considerable interest among actual users, i.e., scientists, engineers, industrialists, entrepreneurs and students. - Evaluates water remediation using pressure driven and potential driven membrane processes - Reviews emerging polymer systems for membranes preparation - Offers a comprehensive analysis in the development of polymer-based membranes and their applications in water remediation - Analyzes membrane performance parameters to evaluate separation efficiency for various water pollutants - Covers concept-to-commercialization aspects of polymer-based membranes in terms of water purification, pollutant removal, stability and scalability
Download or read book Library of Congress Subject Headings written by Library of Congress. Office for Subject Cataloging Policy and published by . This book was released on 1992 with total page 1360 pages. Available in PDF, EPUB and Kindle. Book excerpt:
