Download or read book Photonic MEMS Devices written by Ai-Qun Liu and published by CRC Press. This book was released on 2018-10-08 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photonic MEMS devices represent the next major breakthrough in the silicon revolution. While many quality resources exist on the optic and photonic aspect of device physics, today’s researchers are in need of a reference that goes beyond to include all aspects of engineering innovation. An extension on traditional design and analysis, Photonic MEMS Devices: Design, Fabrication, and Control describes a broad range of optical and photonic devices, from MEMS optical switches and bandgap crystal switches to optical variable attenuators (VOA) and injection locked tunable lasers. It deals rigorously with all these technologies at a fundamental level, systematically introducing critical nomenclature. Each chapter also provides analysis techniques, equations, and experimental results. The book focuses not only on traditional design analysis, but also provides extensive background on realistic simulation and fabrication processes. With a clear attention to experimental relevance, this book provides the fundamental knowledge needed to take the next-step in integrating photonic MEMS devices into commercial products and technology.
Download or read book Photonic Microsystems written by Olav Solgaard and published by Springer Science & Business Media. This book was released on 2009-04-05 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes Microelectromechanical systems (MEMS) technology and demonstrates how MEMS allow miniaturization, parallel fabrication, and efficient packaging of optics, as well as integration of optics and electronics. The book shows how the characteristics of MEMS enable practical implementations of a variety of applications, including projection displays, fiber switches, interferometers, and spectrometers. The authors conclude with an up-to-date discussion of the need for the combination of MEMS and Photonic crystals.
Download or read book Nano Bio Electronic Photonic and MEMS Packaging written by C.P. Wong and published by Springer Science & Business Media. This book was released on 2009-12-23 with total page 761 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanotechnologies are being applied to the biotechnology area, especially in the area of nano material synthesis. Until recently, there has been little research into how to implement nano/bio materials into the device level. “Nano and Bio Electronics Packaging” discusses how nanofabrication techniques can be used to customize packaging for nano devices with applications to biological and biomedical research and products. Covering such topics as nano bio sensing electronics, bio device packaging, NEMs for Bio Devices and much more.
Download or read book Optical MEMS Nanophotonics and Their Applications written by Guangya Zhou and published by CRC Press. This book was released on 2017-12-14 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers device design fundamentals and system applications in optical MEMS and nanophotonics. Expert authors showcase examples of how fusion of nanoelectromechanical (NEMS) with nanophotonic elements is creating powerful new photonic devices and systems including MEMS micromirrors, MEMS tunable filters, MEMS-based adjustable lenses and apertures, NEMS-driven variable silicon nanowire waveguide couplers, and NEMS tunable photonic crystal nanocavities. The book also addresses system applications in laser scanning displays, endoscopic systems, space telescopes, optical telecommunication systems, and biomedical implantable systems. Presents efforts to scale down mechanical and photonic elements into the nano regime for enhanced performance, faster operational speed, greater bandwidth, and higher level of integration. Showcases the integration of MEMS and optical/photonic devices into real commercial products. Addresses applications in optical telecommunication, sensing, imaging, and biomedical systems. Prof. Vincent C. Lee is Associate Professor in the Department of Electrical and Computer Engineering, National University of Singapore. Prof. Guangya Zhou is Associate Professor in the Department of Mechanical Engineering at National University of Singapore.
Download or read book MEMS and Nanotechnology Based Sensors and Devices for Communications Medical and Aerospace Applications written by A. R. Jha and published by CRC Press. This book was released on 2008-04-08 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: The integration of microelectromechanical systems (MEMS) and nanotechnology (NT) in sensors and devices significantly reduces their weight, size, power consumption, and production costs. These sensors and devices can then play greater roles in defense operations, wireless communication, the diagnosis and treatment of disease, and many more applications. MEMS and Nanotechnology-Based Sensors and Devices for Communications, Medical and Aerospace Applications presents the latest performance parameters and experimental data of state-of-the-art sensors and devices. It describes packaging details, materials and their properties, and fabrication requirements vital for design, development, and testing. Some of the cutting-edge materials covered include quantum dots, nanoparticles, photonic crystals, and carbon nanotubes (CNTs). This comprehensive work encompasses various types of MEMS- and NT-based sensors and devices, such as micropumps, accelerometers, photonic bandgap devices, acoustic sensors, CNT-based transistors, photovoltaic cells, and smart sensors. It also discusses how these sensors and devices are used in a number of applications, including weapons’ health, battlefield monitoring, cancer research, stealth technology, chemical detection, and drug delivery.
Download or read book Photonic MEMS Devices written by Ai-Qun Liu and published by CRC Press. This book was released on 2008-09-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photonic MEMS devices represent the next major breakthrough in the silicon revolution. While many quality resources exist on the optic and photonic aspect of device physics, today’s researchers are in need of a reference that goes beyond to include all aspects of engineering innovation. An extension on traditional design and analysis, Photonic MEMS Devices: Design, Fabrication, and Control describes a broad range of optical and photonic devices, from MEMS optical switches and bandgap crystal switches to optical variable attenuators (VOA) and injection locked tunable lasers. It deals rigorously with all these technologies at a fundamental level, systematically introducing critical nomenclature. Each chapter also provides analysis techniques, equations, and experimental results. The book focuses not only on traditional design analysis, but also provides extensive background on realistic simulation and fabrication processes. With a clear attention to experimental relevance, this book provides the fundamental knowledge needed to take the next-step in integrating photonic MEMS devices into commercial products and technology.
Download or read book Optical MEMS written by Huikai Xie and published by MDPI. This book was released on 2019-08-06 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue Optical MEMS that was published in Micromachines
Download or read book MEMS NEMS Sensors written by Goutam Koley and published by MDPI. This book was released on 2019-11-20 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the ever-expanding applications of micro/nano-electromechanical systems (NEMS/MEMS) as sensors and actuators, interest in their development has rapidly expanded over the past decade. Encompassing various excitation and readout schemes, the MEMS/NEMS devices transduce physical parameter changes, such as temperature, mass or stress, caused by changes in desired measurands, to electrical signals that can be further processed. Some common examples of NEMS/MEMS sensors include pressure sensors, accelerometers, magnetic field sensors, microphones, radiation sensors, and particulate matter sensors.
Download or read book Optical MEMS Nanophotonics and Their Applications written by Guangya Zhou and published by CRC Press. This book was released on 2017-12-14 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers device design fundamentals and system applications in optical MEMS and nanophotonics. Expert authors showcase examples of how fusion of nanoelectromechanical (NEMS) with nanophotonic elements is creating powerful new photonic devices and systems including MEMS micromirrors, MEMS tunable filters, MEMS-based adjustable lenses and apertures, NEMS-driven variable silicon nanowire waveguide couplers, and NEMS tunable photonic crystal nanocavities. The book also addresses system applications in laser scanning displays, endoscopic systems, space telescopes, optical telecommunication systems, and biomedical implantable systems. Presents efforts to scale down mechanical and photonic elements into the nano regime for enhanced performance, faster operational speed, greater bandwidth, and higher level of integration. Showcases the integration of MEMS and optical/photonic devices into real commercial products. Addresses applications in optical telecommunication, sensing, imaging, and biomedical systems. Prof. Vincent C. Lee is Associate Professor in the Department of Electrical and Computer Engineering, National University of Singapore. Prof. Guangya Zhou is Associate Professor in the Department of Mechanical Engineering at National University of Singapore.
Download or read book Advanced Manufacturing for Optical Fibers and Integrated Photonic Devices written by Abdul Al-Azzawi and published by CRC Press. This book was released on 2017-12-19 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Manufacturing for Optical Fibers and Integrated Photonic Devices explores the theoretical principles and industrial practices of high-technology manufacturing. Focusing on fiber optic, semiconductor, and laser products, this book: Explains the fundamentals of standard, high-tech, rapid, and additive manufacturing workshops Examines the production lines, processes, and clean rooms needed for the manufacturing of products Discusses the high-technology manufacturing and installation of fiber optic cables, connectors, and active/passive devices Describes continuous improvement, waste reduction through 5S application, and management’s responsibilities in supporting production Covers Lean Manufacturing processes, product improvement, and workplace safety, as well as internal/external and ISO auditing Offers a step-by-step approach complete with numerous figures and tables, detailed references, and a glossary of terms Employs the international system of units (SI) throughout the text Advanced Manufacturing for Optical Fibers and Integrated Photonic Devices presents the latest manufacturing achievements and their applications in the high-tech sector. Inspired by the author’s extensive industrial experience, the book provides a comprehensive overview of contemporary manufacturing technologies.
Download or read book An Introduction to Microelectromechanical Systems Engineering written by Nadim Maluf and published by Artech House. This book was released on 2004 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bringing you up-to-date with the latest developments in MEMS technology, this major revision of the best-selling An Introduction to Microelectromechanical Systems Engineering offers you a current understanding of this cutting-edge technology. You gain practical knowledge of MEMS materials, design, and manufacturing, and learn how it is being applied in industrial, optical, medical and electronic markets. The second edition features brand new sections on RF MEMS, photo MEMS, micromachining on materials other than silicon, reliability analysis, plus an expanded reference list. With an emphasis on commercialized products, this unique resource helps you determine whether your application can benefit from a MEMS solution, understand how other applications and companies have benefited from MEMS, and select and define a manufacturable MEMS process for your application. You discover how to use MEMS technology to enable new functionality, improve performance, and reduce size and cost. The book teaches you the capabilities and limitations of MEMS devices and processes, and helps you communicate the relative merits of MEMS to your company's management. From critical discussions on design operation and process fabrication of devices and systems, to a thorough explanation of MEMS packaging, this easy-to-understand book clearly explains the basics of MEMS engineering, making it an invaluable reference for your work in the field.
Download or read book Portable Spectroscopy and Spectrometry Applications written by Richard A. Crocombe and published by John Wiley & Sons. This book was released on 2021-04-28 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: The most comprehensive resource available on the many applications of portable spectrometers, including material not found in any other published work Portable Spectroscopy and Spectrometry: Volume Two is an authoritative and up-to-date compendium of the diverse applications for portable spectrometers across numerous disciplines. Whereas Volume One focuses on the specific technologies of the portable spectrometers themselves, Volume Two explores the use of portable instruments in wide range of fields, including pharmaceutical development, clinical research, food analysis, forensic science, geology, astrobiology, cultural heritage and archaeology. Volume Two features contributions by a multidisciplinary team of experts with hands-on experience using portable instruments in their respective areas of expertise. Organized both by instrumentation type and by scientific or technical discipline, 21 detailed chapters cover various applications of portable ion mobility spectrometry (IMS), infrared and near-infrared (NIR) spectroscopy, Raman and x-ray fluorescence (XRF) spectroscopy, smartphone spectroscopy, and many others. Filling a significant gap in literature on the subject, the second volume of Portable Spectroscopy and Spectrometry: Features a significant amount of content published for the first time, or not available in existing literature Brings together work by authors with assorted backgrounds and fields of study Discusses the central role of applications in portable instrument development Covers the algorithms, calibrations, and libraries that are of critical importance to successful applications of portable instruments Includes chapters on portable spectroscopy applications in areas such as the military, agriculture and feed, hazardous materials (HazMat), art conservation, and environmental science Portable Spectroscopy and Spectrometry: Volume Two is an indispensable resource for developers of portable instruments in universities, research institutes, instrument companies, civilian and government purchasers, trainers, operators of portable instruments, and educators and students in portable spectroscopy courses.
Download or read book Big data analytics for smart healthcare applications written by Celestine Iwendi and published by Frontiers Media SA. This book was released on 2023-04-17 with total page 1365 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Laser Growth and Processing of Photonic Devices written by Nikolaos A Vainos and published by Elsevier. This book was released on 2012-07-10 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of lasers in the processing of electronic and photonic material is becoming increasingly widespread, with technological advances reducing costs and increasing both the quality and range of novel devices which can be produced. Laser growth and processing of photonic devices is the first book to review this increasingly important field.Part one investigates laser-induced growth of materials and surface structures, with pulsed laser deposition techniques, the formation of nanocones and the fabrication of periodic photonic microstructures explored in detail. Laser-induced three-dimensional micro- and nano-structuring are the focus of part two. Exploration of multiphoton lithography, processing and fabrication is followed by consideration of laser-based micro- and nano-fabrication, laser-induced soft matter organization and microstructuring, and laser-assisted polymer joining methods. The book concludes in part three with an investigation into laser fabrication and manipulation of photonic structures and devices. Laser seeding and thermal processing of glass with nanoscale resolution, laser-induced refractive index manipulation, and the thermal writing of photonic devices in glass and polymers are all considered.With its distinguished editor and international team of expert contributors, Laser growth and processing of photonic devices is an essential tool for all materials scientists, engineers and researchers in the microelectronics industry. - The first book to review the increasingly important field of laser growth and processing of photonic devices - Investigates laser-induced growth of materials and surface structures, pulsed laser deposition techniques, the formation of nanocones and the fabrication of periodic photonic microstructures - Examines laser-induced three-dimensional micro- and nano-structuring and concludes with an investigation into laser fabrication and manipulation of photonic structures and devices
Download or read book Integrated Microsystems written by Krzysztof Iniewski and published by CRC Press. This book was released on 2011-10-11 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt: As rapid technological developments occur in electronics, photonics, mechanics, chemistry, and biology, the demand for portable, lightweight integrated microsystems is relentless. These devices are getting exponentially smaller, increasingly used in everything from video games, hearing aids, and pacemakers to more intricate biomedical engineering and military applications. Edited by Kris Iniewski, a revolutionary in the field of advanced semiconductor materials, Integrated Microsystems: Electronics, Photonics, and Biotechnology focuses on techniques for optimized design and fabrication of these intelligent miniaturized devices and systems. Composed of contributions from experts in academia and industry around the world, this reference covers processes compatible with CMOS integrated circuits, which combine computation, communications, sensing, and actuation capabilities. Light on math and physics, with a greater emphasis on microsystem design and configuration and electrical engineering, this book is organized in three sections—Microelectronics and Biosystems, Photonics and Imaging, and Biotechnology and MEMs. It addresses key topics, including physical and chemical sensing, imaging, smart actuation, and data fusion and management. Using tables, figures, and equations to help illustrate concepts, contributors examine and explain the potential of emerging applications for areas including biology, nanotechnology, micro-electromechanical systems (MEMS), microfluidics, and photonics.
Download or read book Photonic Devices and Algorithms for Computing written by and published by . This book was released on 2002 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book MOEMS written by M. Edward Motamedi and published by SPIE Press. This book was released on 2005 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the exciting and fast-moving field of MOEMS to graduate students, scientists, and engineers by providing a foundation of both micro-optics and MEMS that will enable them to conduct future research in the field. Born from the relatively new fields of MEMS and micro-optics, MOEMS are proving to be an attractive and low-cost solution to a range of device problems requiring high optical functionality and high optical performance. MOEMS solutions include optical devices for telecommunication, sensing, and mobile systems such as v-grooves, gratings, shutters, scanners, filters, micromirrors, switches, alignment aids, lens arrays, and hermetic wafer-scale optical packaging. An international team of leading researchers contributed to this book, and it presents examples and problems employing cutting-edge MOEM devices. It will inspire researchers to further advance the design, fabrication, and analysis of MOEM systems.
