Download or read book Photon Processing in Microelectronics and Photonics written by and published by . This book was released on 2007 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Microflow Cytometer written by Frances S. Ligler and published by CRC Press. This book was released on 2019-05-08 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the continuing development of inexpensive, portable flow cytometers through incorporation of microfluidic technologies and small optical components. The underlying microfluidic theories essential for microflow cytometry isdiscussed in detail, as well as advances that are representative of the current state-of-the-art. Design and fabrication strategies for these innovative component technologies will be subsequently presented by numerous research groups leading the field. Integration of the components into functional prototype devices for analysis and manipulation of particles and cells are reviewed. Multiple currently available commercial systems are examined to highlight both strengths and areas for improvement.
Download or read book Ultrafast Laser Processing written by Koji Sugioka and published by CRC Press. This book was released on 2013-06-24 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past few decades, the rapid development of ultrafast lasers, such as femtosecond lasers and picosecond lasers, has opened up new avenues for material processing due to their unique features such as ultrashort pulse width and extremely high peak intensity. These techniques have become a common tool for micro- and nanoprocessing of a variety
Download or read book Ultrashort Pulse Laser Ablation of Bulk Materials Using Shaped Laser Beams written by Dmitriy Mikhaylov and published by Cuvillier Verlag. This book was released on 2021-06-24 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: High precision, high quality, and high throughput of ultrashort pulse laser ablation of bulk material are the most demanded properties that are required to let this process technology compete with other micro-machining techniques. Previous attempts to increase volumetric ablation rates of ultrashort pulse laser processes were based on the increase of fluence or pulse repetition rates. They run into limitations mainly set by the occurrence of bumpy surfaces due to overheating of bulk material. In this work, the potential of laser beam shaping for the enhancement of ablation rates is studied systematically for the first time. The question regarding the physically shortest possible process time for ablation of 2.5D-structures by means of an ultrashort pulse laser is answered using a heat conduction model, which is extended by the ability to consider spatially shaped beams. The strategy of laser beam stamping is implemented in a novel optical setup and proven both theoretically and experimentally to have a great potential for increasing ablation rates.
Download or read book Photon based Nanoscience and Nanobiotechnology written by Jan J. Dubowski and published by Springer Science & Business Media. This book was released on 2007-04-24 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a set of articles reviewing state-of-the art research and recent advancements in the field of photon-matter interaction for micro/nanomaterials synthesis and manipulation of properties of biological and inorganic materials at the atomic level. Photon-based nanoscience and related technologies have created exciting opportunities for the fabrication and characterization of nano(bio)material devices and systems.
Download or read book Advances in Laser Materials Processing written by Jonathan R. Lawrence and published by Woodhead Publishing. This book was released on 2017-09-20 with total page 802 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Laser Materials Processing: Technology, Research and Application, Second Edition, provides a revised, updated and expanded overview of the area, covering fundamental theory, technology and methods, traditional and emerging applications and potential future directions. The book begins with an overview of the technology and challenges to applying the technology in manufacturing. Parts Two thru Seven focus on essential techniques and process, including cutting, welding, annealing, hardening and peening, surface treatments, coating and materials deposition. The final part of the book considers the mathematical modeling and control of laser processes. Throughout, chapters review the scientific theory underpinning applications, offer full appraisals of the processes described and review potential future trends. - A comprehensive practitioner guide and reference work explaining state-of-the-art laser processing technologies in manufacturing and other disciplines - Explores challenges, potential, and future directions through the continuous development of new, application-specific lasers in materials processing - Provides revised, expanded and updated coverage
Download or read book Handbook of Liquids Assisted Laser Processing written by Arvi Kruusing and published by Elsevier. This book was released on 2010-07-07 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: Laser processing of solid materials has been commonly performed in gas ambient. Having the workpiece immersed into liquid, having a liquid film on it, or soaking the material with liquid gives several advantages such as removal of the debris, lowering the heat load on the workpiece, and confining the vapour and plasma, resulting in higher shock pressure on the surface. Introduced in the 1980s, neutral liquids assisted laser processing (LALP) has proved to be advantageous in the cutting of heat-sensitive materials, shock peening of machine parts, cleaning of surfaces, fabrication of micro-optical components, and for generation of nanoparticles in liquids. The liquids used range from water through organic solvents to cryoliquids. The primary aim of Handbook of Liquids-Assisted Laser Processing is to present the essentials of previous research (tabulated data of experimental conditions and results), and help researchers develop new processing and diagnostics techniques (presenting data of liquids and a review of physical phenomena associated with LALP). Engineers can use the research results and technological innovation information to plan their materials processing tasks. Laser processing in liquids has been applied to a number of different tasks in various fields such as mechanical engineering, microengineering, chemistry, optics, and bioscience. A comprehensive glossary with definitions of the terms and explanations has been added. The book covers the use of chemically inert liquids under normal conditions. Laser chemical processing examples are presented for comparison only. - First book in this rapidly growing field impacting mechanical and micro/nano-engineering - Covers different kinds of liquid-assisted laser processing of a large variety of materials - Covers lasers emitting from UV to IR with pulse lengths down to femtoseconds - Reviews over 500 scientific articles and 300 inventions and tabulates their main features - Gives a qualitative and quantitative description of the physical phenomena associated with LALP - Tabulates 61 parameters for 100 liquids - Glossary of over 200 terms and abbreviations
Download or read book Device and Process Technologies for MEMS Microelectronics and Photonics III written by Jung-Chih Chiao and published by SPIE-International Society for Optical Engineering. This book was released on 2004 with total page 612 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of SPIE present the original research papers presented at SPIE conferences and other high-quality conferences in the broad-ranging fields of optics and photonics. These books provide prompt access to the latest innovations in research and technology in their respective fields. Proceedings of SPIE are among the most cited references in patent literature.
Download or read book 3D Laser Microfabrication written by Hiroaki Misawa and published by John Wiley & Sons. This book was released on 2006-08-21 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thorough introduction to 3D laser microfabrication technology, leading readers from the fundamentals and theory to its various potent applications, such as the generation of tiny objects or three-dimensional structures within the bulk of transparent materials. The book also presents new theoretical material on dielectric breakdown, allowing a better understanding of the differences between optical damage on surfaces and inside the bulk, as well as a look into the future. Chemists, physicists, materials scientists and engineers will find this a valuable source of interdisciplinary knowledge in the field of laser optics and nanotechnology.
Download or read book Efficient material laser beam ablation with a picosecond laser written by Juan Pablo Calderón Urbina and published by Springer Nature. This book was released on 2020-07-22 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ultra-short pulse laser processing of ultra-hard materials requires an accurate and agile experimental and analytical investigation to determine an efficient choice of parameters and settings to optimize ablation. Therefore, this work presents a quality-oriented experimental approach and an analytical approach for the modeling and validation of multi-pulse picosecond laser beam ablation on cemented tungsten carbide. This work starts with a review of literature and state-of-the-art theories of four relevant areas for this research: picosecond lasers, laser beam ablation process, cemented tungsten carbide (WC) and quality-oriented tools. Subsequently, a concept for an efficient material laser beam ablation with a picosecond laser was introduced. Furthermore, two approaches for the investigation are presented from an experimental and analytical perspective, respectively. The first approach introduced a methodology for the identification of influential parameters. It executes a quality-oriented methodology based on the SWOT analysis, cause-and-effect diagram and the variable search methodology. The conclusion of the methodology gave the interaction of pulse repetition rate and scanner speed in the form of pulse overlap and track overlap PO/TO as the most influential parameter in the maximization of the ablation rate. The second most influential factors resulted laser beam power and burst-mode. The second approach, description of the model, executes a theoretical analysis of the picosecond laser beam ablation of cemented WC by the application of the Beer-Lambert law and multi-pulse ablation modeling. The unavailable material properties were obtained by experimental investigations, like in the cases of the incubation factor and the reflectivity factor. Threshold fluence for cemented WC was determined by the application of the heat transfer theory and input power intensity was adapted to a Gaussian beam profile. At the end of the approach, power density visualizations of a picosecond laser pulse under the five available pulse repetition rates were modeled and validated. The findings from the adaptation of the Beer-Lambert law acted as basis for development of the multi-pulse laser ablation model for both single-pulse mode and burst-mode, respectively. Based on the definition of the number of pulses N irradiating the same area, the corresponding threshold fluence for N, the input fluence and incubation factor, ablation depth was modeled and experimentally validated. Finally, results and conclusions of both approaches were discussed and a framework for an efficient laser beam ablation was presented. Recommendations for further actions on research and industry were introduced at the end of the work.
Download or read book Silicon Photonics III written by Lorenzo Pavesi and published by Springer Science & Business Media. This book was released on 2016-01-08 with total page 540 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is volume III of a series of books on silicon photonics. It reports on the development of fully integrated systems where many different photonics component are integrated together to build complex circuits. This is the demonstration of the fully potentiality of silicon photonics. It contains a number of chapters written by engineers and scientists of the main companies, research centers and universities active in the field. It can be of use for all those persons interested to know the potentialities and the recent applications of silicon photonics both in microelectronics, telecommunication and consumer electronics market.
Download or read book Modern Manufacturing Processes written by Muammer Koç and published by John Wiley & Sons. This book was released on 2019-08-14 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an in-depth understanding of the fundamentals of a wide range of state-of-the-art materials manufacturing processes Modern manufacturing is at the core of industrial production from base materials to semi-finished goods and final products. Over the last decade, a variety of innovative methods have been developed that allow for manufacturing processes that are more versatile, less energy-consuming, and more environmentally friendly. This book provides readers with everything they need to know about the many manufacturing processes of today. Presented in three parts, Modern Manufacturing Processes starts by covering advanced manufacturing forming processes such as sheet forming, powder forming, and injection molding. The second part deals with thermal and energy-assisted manufacturing processes, including warm and hot hydrostamping. It also covers high speed forming (electromagnetic, electrohydraulic, and explosive forming). The third part reviews advanced material removal process like advanced grinding, electro-discharge machining, micro milling, and laser machining. It also looks at high speed and hard machining and examines advances in material modeling for manufacturing analysis and simulation. Offers a comprehensive overview of advanced materials manufacturing processes Provides practice-oriented information to help readers find the right manufacturing methods for the intended applications Highly relevant for material scientists and engineers in industry Modern Manufacturing Processes is an ideal book for practitioners and researchers in materials and mechanical engineering.
Download or read book Optics Photonics and Laser Technology 2017 written by Paulo Ribeiro and published by Springer. This book was released on 2019-05-03 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses both the theoretical and practical aspects of optics, photonics and lasers, presenting new methods, technologies, advanced prototypes, systems, tools and techniques as well as a general survey indicating future trends and directions. The main fields addressed include nonlinear optical phenomena, photonics for energy, high-field phenomena, photonic and optoelectronic sensors and devices, optical communications, biomedical optics and photonics. It also covers a large spectrum of materials, ranging from semiconductor-based optical materials to optical glasses, organic materials, photorefractive materials and nanophotonic materials, as well as applications such as metrology, optometry, adaptive optics, all optical instrumentation, optical communications, quantum information, lighting technologies, energy harvesting and optically based biomedical diagnosis and therapeutics.
Download or read book Advanced Engineering of Materials Through Lasers written by J. Radhakrishnan and published by Springer Nature. This book was released on 2022-06-15 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the fundamentals of different laser-based manufacturing and processing, namely laser shock peening, laser micromachining, laser cleaning, cladding, remelting, laser honing, and other several aspects of lasers. The book discusses the general laser interaction with different materials. The application of laser-based post-processing of additive manufacturing and repair engineering is reported. It also provides the reader with mechanism of lasers in manufacturing and recent developments in tools, technologies, controls, and operations.
Download or read book Frontiers in Guided Wave Optics and Optoelectronics written by Bishnu Pal and published by BoD – Books on Demand. This book was released on 2010-02-01 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the editor, I feel extremely happy to present to the readers such a rich collection of chapters authored/co-authored by a large number of experts from around the world covering the broad field of guided wave optics and optoelectronics. Most of the chapters are state-of-the-art on respective topics or areas that are emerging. Several authors narrated technological challenges in a lucid manner, which was possible because of individual expertise of the authors in their own subject specialties. I have no doubt that this book will be useful to graduate students, teachers, researchers, and practicing engineers and technologists and that they would love to have it on their book shelves for ready reference at any time.
Download or read book Fibre Optic Communication written by Herbert Venghaus and published by Springer. This book was released on 2017-01-20 with total page 873 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives an in-depth description of key devices of current and next generation fibre optic communication networks. Devices treated include semiconductor lasers, optical amplifiers, modulators, wavelength filters and other passives, detectors, all-optical switches, but relevant properties of optical fibres and network aspects are included as well. The presentations include the physical principles underlying the various devices, technologies used for their realization, typical performance characteristics and limitations, but development trends towards more advanced components are also illustrated. This new edition of a successful book was expanded and updated extensively. The new edition covers among others lasers for optical communication, optical switches, hybrid integration, monolithic integration and silicon photonics. The main focus is on Indium phosphide-based structures but silicon photonics is included as well. The book covers relevant principles, state-of-the-art implementations, status of current research as well as expected future components.
Download or read book Implications of Emerging Micro and Nanotechnologies written by National Research Council and published by National Academies Press. This book was released on 2003-02-06 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: Expansion of micro-technology applications and rapid advances in nano-science have generated considerable interest by the Air Force in how these developments will affect the nature of warfare and how it could exploit these trends. The report notes four principal themes emerging from the current technological trends: increased information capability, miniaturization, new materials, and increased functionality. Recommendations about Air Force roles in micro- and nanotechnology research are presented including those areas in which the Air Force should take the lead. The report also provides a number of technical and policy findings and recommendations that are critical for effective development of the Air Force's micro- and nano-science and technology program
