Download or read book Titanium Dioxide TiO2 and Its Applications written by Francesco Parrino and published by Elsevier. This book was released on 2020-11-29 with total page 735 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scientific interest in TiO2-based materials has exponentially grown in the last few decades. Titanium Dioxide (TiO2) and Its Applications introduces the main physicochemical properties of TiO2 which are the basis of its applications in various fields. While the basic principles of the TiO2 properties have been the subject of various previous publications, this book is mainly devoted to TiO2 applications. The book includes contributions written by experts from a wide range of disciplines in order to address titanium dioxide's utilization in energy, consumer, materials, devices, and catalytic applications. The various applications identified include: photocatalysis, catalysis, optics, electronics, energy storage and production, ceramics, pigments, cosmetics, sensors, and heat transfer. Titanium Dioxide (TiO2) and Its Applications is suitable for a wide readership in the disciplines of materials science, chemistry, and engineering in both academia and industry. - Includes a wide range of current and emerging applications of titanium dioxide in the fields of energy, consumer applications, materials, and devices - Provides a brief overview of titanium dioxide and its properties, as well as techniques to design, deposit, and study the material - Discusses the relevant properties, preparation methods, and other apposite considerations in each application-focused chapter

Download or read book Characterization of Solid Materials and Heterogeneous Catalysts written by Michel Che and published by John Wiley & Sons. This book was released on 2012-04-16 with total page 1313 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume book provides an overview of physical techniques used to characterize the structure of solid materials, on the one hand, and to investigate the reactivity of their surface, on the other. Therefore this book is a must-have for anyone working in fields related to surface reactivity. Among the latter, and because of its most important industrial impact, catalysis has been used as the directing thread of the book. After the preface and a general introduction to physical techniques by M. Che and J.C. Vedrine, two overviews on physical techniques are presented by G. Ertl and Sir J.M. Thomas for investigating model catalysts and porous catalysts, respectively. The book is organized into four parts: Molecular/Local Spectroscopies, Macroscopic Techniques, Characterization of the Fluid Phase (Gas and/ or Liquid), and Advanced Characterization. Each chapter focuses upon the following important themes: overview of the technique, most important parameters to interpret the experimental data, practical details, applications of the technique, particularly during chemical processes, with its advantages and disadvantages, conclusions.

Download or read book Titanium Dioxide written by Dongfang Yang and published by BoD – Books on Demand. This book was released on 2018-06-27 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide is currently being used in many industrial products. It provides unique photocatalytic properties for water splitting and purification, bacterial inactivation, and organics degradation. It has also been widely used as the photoanode for dye-sensitized solar cells and coatings for self-cleaning surfaces, biomedical implants, and nanomedicine. This book covers various aspects of titanium dioxide nanomaterials including their unique one-dimensional, two-dimensional, mesoporous, and hierarchical nanostructures and their synthetic methods such as sol-gel, hydrothermal, anodic oxidation, and electrophoretic deposition, as well as its key applications in environmental and energy sectors. Through these 24 chapters written by experts from the international scientific community, readers will have access to a comprehensive overview of the recent research and development findings on the titanium dioxide nanomaterials.

Download or read book TiO2 Nanoparticles written by Aiguo Wu and published by John Wiley & Sons. This book was released on 2020-06-02 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: A unique book that summarizes the properties, toxicology, and biomedical applications of TiO2-based nanoparticles Nanotechnology is becoming increasingly important for products used in our daily lives. Nanometer-sized titanium dioxide (TiO2) are widely used in industry for different purposes, such as painting, sunscreen, printing, cosmetics, biomedicine, and so on. This book summarizes the advances of TiO2 based nanobiotechnology and nanomedicine, covering materials properties, toxicological research, and biomedical application, such as antibacter, biosensing, and cancer theranostics. It uniquely integrates the TiO2 applications from physical properties, toxicology to various biomedical applications, and includes black TiO2 based cancer theranostics. Beginning with a comprehensive introduction to the properties and applications of nanoparticles, TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine offers chapters on: Toxicity of TiO2 Nanoparticles; Antibacterial Applications of TiO2 Nanoparticles; Surface Enhanced Raman Spectrum of TiO2 Nanoparticle for Biosensing (TiO2 Nanoparticle Served as SERS Sensing Substrate); TiO2 as Inorganic Photosensitizer for Photodynamic Therapy; Cancer Theranostics of Black TiO2 Nanoparticles; and Neurodegenerative Disease Diagnostics and Therapy of TiO2-Based Nanoparticles. This title: Blends the physical properties, toxicology of TiO2 nanoparticles to the many biomedical applications Includes black TiO2 based cancer theranostics in its coverage Appeals to a broad audience of researchers in academia and industry working on nanomaterials-based biosensing, drug delivery, nanomedicine TiO2 Nanoparticles: Applications in Nanobiotechnology, Theranostics and Nanomedicine is an ideal book for medicinal chemists, analytical chemists, biochemists, materials scientists, toxicologists, and those in the pharmaceutical industry.

Download or read book Chemistry of Ozone in Water and Wastewater Treatment written by Clemens von Sonntag and published by IWA Publishing. This book was released on 2012-08-31 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Even though ozone has been applied for a long time for disinfection and oxidation in water treatment, there is lack of critical information related to transformation of organic compounds. This has become more important in recent years, because there is considerable concern about the formation of potentially harmful degradation products as well as oxidation products from the reaction with the matrix components. In recent years, a wealth of information on the products that are formed has accumulated, and substantial progress in understanding mechanistic details of ozone reactions in aqueous solution has been made. Based on the latter, this may allow us to predict the products of as yet not studied systems and assist in evaluating toxic potentials in case certain classes are known to show such effects. Keeping this in mind, Chemistry of Ozone in Water and Wastewater Treatment: From Basic Principles to Applications discusses mechanistic details of ozone reactions as much as they are known to date and applies them to the large body of studies on micropollutant degradation (such as pharmaceuticals and endocrine disruptors) that is already available. Extensively quoting the literature and updating the available compilation of ozone rate constants gives the reader a text at hand on which his research can be based. Moreover, those that are responsible for planning or operation of ozonation steps in drinking water and wastewater treatment plants will find salient information in a compact form that otherwise is quite disperse. A critical compilation of rate constants for the various classes of compounds is given in each chapter, including all the recent publications. This is a very useful source of information for researchers and practitioners who need kinetic information on emerging contaminants. Furthermore, each chapter contains a large selection of examples of reaction mechanisms for the transformation of micropollutants such as pharmaceuticals, pesticides, fuel additives, solvents, taste and odor compounds, cyanotoxins. Authors: Prof. Dr. Clemens von Sonntag, Max-Planck-Institut für Bioanorganische Chemie, Mülheim an der Ruhr, and Instrumentelle Analytische Chemie, Universität Duisburg-Essen, Essen, Germany and Prof. Dr. Urs von Gunten, Eawag, Swiss Federal Institute of Aquatic Science and Technology, Dübendorf, and Ecole Polytechnique Federal de Lausanne, Lausanne, Switzerland.

Download or read book Nanostructured And Photoelectrochemical Systems For Solar Photon Conversion written by Mary D Archer and published by World Scientific. This book was released on 2008-08-04 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, expert authors describe advanced solar photon conversion approaches that promise highly efficient photovoltaic and photoelectrochemical cells with sophisticated architectures on the one hand, and plastic photovoltaic coatings that are inexpensive enough to be disposable on the other. Their leitmotifs include light-induced exciton generation, junction architectures that lead to efficient exciton dissociation, and charge collection by percolation through mesoscale phases. Photocatalysis is closely related to photoelectrochemistry, and the fundamentals of both disciplines are covered in this volume./a

Download or read book TiO2 Photocatalysis written by Akira Fujishima and published by . This book was released on 1999 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Titanium Dioxide Photocatalysis written by Vladimiro Dal Santo and published by MDPI. This book was released on 2019-05-27 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the seminal work of Fujishima et al. dates back to 1971, TiO2 still remains the most diffused and studied semiconductor, employed in photo-oxidation processes for cleantech (i.e., polluted water and air treatment), in solar fuel production (mainly hydrogen production by water photo splitting), and in Carbon Capture and Utilization (CCU) processes by CO2 photoreduction. The eleven articles, among them three reviews, in this book cover recent results and research trends of various aspects of titanium dioxide photocatalysis, with the chief aim of improving the final efficiency of TiO2-based materials. Strategies include doping, metal co-catalyst deposition, and the realization of composites with plasmonic materials, other semiconductors, and graphene. Photocatalysts with high efficiency and selectivity can be also obtained by controlling the precise crystal shape (and homogeneous size) and the organization in superstructures from ultrathin films to hierarchical nanostructures. Finally, the theoretical modeling of TiO2 nanoparticles is discussed and highlighted. The range of topics addressed in this book will stimulate the reader’s interest as well as provide a valuable source of information for researchers in academia and industry.

Download or read book Photoelectrochemical Hydrogen Production written by Roel van de Krol and published by Springer Science & Business Media. This book was released on 2011-11-09 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photoelectrochemical Hydrogen Production describes the principles and materials challenges for the conversion of sunlight into hydrogen through water splitting at a semiconducting electrode. Readers will find an analysis of the solid state properties and materials requirements for semiconducting photo-electrodes, a detailed description of the semiconductor/electrolyte interface, in addition to the photo-electrochemical (PEC) cell. Experimental techniques to investigate both materials and PEC device performance are outlined, followed by an overview of the current state-of-the-art in PEC materials and devices, and combinatorial approaches towards the development of new materials. Finally, the economic and business perspectives of PEC devices are discussed, and promising future directions indicated. Photoelectrochemical Hydrogen Production is a one-stop resource for scientists, students and R&D practitioners starting in this field, providing both the theoretical background as well as useful practical information on photoelectrochemical measurement techniques. Experts in the field benefit from the chapters on current state-of-the-art materials/devices and future directions.

Download or read book Nanostructured Titanium Dioxide in Photocatalysis written by It-Meng Low and published by CRC Press. This book was released on 2021-06-18 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium dioxide (TiO2) has drawn considerable attention as an attractive inorganic raw material for various applications due to its inexpensiveness, nontoxic nature, stability, and excellent photocatalytic activity. Photocatalysis is one of the most promising route for sustainable chemistry of the 21st century. It can contribute to solving environmental, global energy, and chemical problems, as well as to the sustainable production of commodities in the near future. This book presents the fundamentals of photocatalysis in nanostructured TiO2 and describes the factors affecting the photocatalytic activity, design, and synthesis of various forms of nanostructured TiO2. It highlights the use of ion-doping and inert-atmosphere annealing to extend the light-absorption range of photocatalysts and reduce recombination between electrons and holes. It discusses numerous applications in the fields of energy and environment, such as water purification, gas sensing, storage and delivery, and energy generation. The book is an invaluable resource and useful guide for a broad readership in various fields of catalysis, materials science, environment, and energy.

Download or read book Titanium Dioxide written by Hafiz Muhammad Ali and published by BoD – Books on Demand. This book was released on 2022-03-02 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a comprehensive overview of titanium dioxide, including recent advances and applications. It focuses on the compound’s uses in environmental remediation, photocatalytic materials, rechargeable lithium-ion batteries, thin films, energy storage, semiconductors, and much more. This volume is a useful resource for researchers, scientists, engineers, and students.

Download or read book Photocatalytic Semiconductors written by Aracely Hernández-Ramírez and published by Springer. This book was released on 2014-11-17 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This critical volume examines the different methods used for the synthesis of a great number of photocatalysts, including TiO2, ZnO and other modified semiconductors, as well as characterization techniques used for determining the optical, structural and morphological properties of the semiconducting materials. Additionally, the authors discuss photoelectrochemical methods for determining the light activity of the photocatalytic semiconductors by means of measurement of properties such as band gap energy, flat band potential and kinetics of hole and electron transfer. Photocatalytic Semiconductors: Synthesis, Characterization and Environmental Applications provide an overview of the semiconductor materials from first- to third-generation photocatalysts and their applications in wastewater treatment and water disinfection. The book further presents economic and toxicological aspects in the production and application of photocatalytic materials.

Download or read book Nano Antimicrobials written by Nicola Cioffi and published by Springer Science & Business Media. This book was released on 2012-02-24 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a high demand for antimicrobials for the treatment of new and emerging microbial diseases. In particular, microbes developing multidrug resistance have created a pressing need to search for a new generation of antimicrobial agents, which are effective, safe and can be used for the cure of multidrug-resistant microbial infections. Nano-antimicrobials offer effective solutions for these challenges; the details of these new technologies are presented here. The book includes chapters by an international team of experts. Chemical, physical, electrochemical, photochemical and mechanical methods of synthesis are covered. Moreover, biological synthesis using microbes, an option that is both eco-friendly and economically viable, is presented. The antimicrobial potential of different nanoparticles is also covered, bioactivity mechanisms are elaborated on, and several applications are reviewed in separate sections. Lastly, the toxicology of nano-antimicrobials is briefly assessed.

Download or read book Diamond Electrochemistry written by Akira Fujishima and published by Elsevier. This book was released on 2005 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides an overview of research in Diamond Electrochemistry, as well as practical applications of diamond electrodes. With chapters written by experts in their respective fields, this book serves as a useful source of information for electrochemists working in physical or analytical chemistry.

Download or read book Solar Light Harvesting with Nanocrystalline Semiconductors written by Oleksandr Stroyuk and published by Springer. This book was released on 2017-11-07 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains the use of nanocrystalline semiconductors in the harvesting of energy from solar light. It introduces promising methodology and technology which may help to increase the efficiency of light harvesting – one of the major challenges on the way toward sustainable energy generation.The book starts with a general introduction to the photochemistry of semiconductor nanocrystals. In the introductory chapter, the author also provides a frank and critical discussion on perspectives and limitations of the photocatalytic processes for solar light conversion including a historical account on semiconductor photocatalysis. He discusses that (and also why) it is a long way from laboratory prototypes to real sustainable technologies.The following chapters outline the conversion of solar light energy in semiconductor nanophotocatalysis on the one hand, and to (electric) energy in nanocrystalline semiconductor-based solar cells on the other hand. Topics addressed include nanophotocatalytic hydrogen production, artificial photosynthesis, quantum-dot sensitized liquid-junction and bulk heterojunction solar cells. Perspectives and opportunities, but also bottlenecks and limitations are discussed and the novel systems compared with established technology, such as classical silicon solar cells. While readers in this way learn to understand the basics and get introduced to the current research in the field, the final chapter provides them with the necessary knowledge about methodology, both in synthesis and characterization of semiconductor nanophotocatalysts and semiconductor nanomaterials, including examples for the practice of photocatalytic experiments and the studies of semiconductor-based solar cells.

Download or read book Emerging Trends in TiO2 Photocatalysis and Applications written by Trong-On Do and published by MDPI. This book was released on 2020-12-28 with total page 596 pages. Available in PDF, EPUB and Kindle. Book excerpt: The semiconductor titanium dioxide (TiO2) has been evolved as a prototypical material to understand the photocatalytic process, and has been demonstrated for various photocatalytic applications such as pollutants degradation, water splitting, heavy metal reduction, CO2 conversion, N2 fixation, bacterial disinfection, etc. Rigorous photocatalytic studies on TiO2 have paved the way to understanding the various chemical processes involved and the physical parameters (optical and electrical) required to design and construct diverse photocatalytic systems. Accordingly, it has been realized that an effective photocatalyst should have ideal band edge potential, narrow band gap energy, reduced charge recombination, enhanced charge separation, improved interfacial charge transfer, surface-rich catalytic sites, etc. As a result, many strategies have been developed to design a variety of photocatalytic systems, which include doping, composite formation, sensitization, co-catalyst loading, etc. Towards highlighting the above-mentioned diversities in TiO2 photocatalysis, there have been many interesting original research works on TiO2, involving material designs for various photocatalytic applications published in this Special Issue. In addition, some excellent review papers have also been published in this Special Issue, focusing on the various TiO2-based photocatalytic systems and their mechanisms and applications.

Download or read book Semiconductor Photocatalysis written by Wenbin Cao and published by BoD – Books on Demand. This book was released on 2016-08-24 with total page 678 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photocatalysis is a hot topic because it is an environmentally friendly approach toward the conversion of light energy into chemical energy at mild reaction environments. Also, it is well applied in several major areas such as water splitting, bacterial inactivation, and pollutants elimination, which is a possible solution to energy shortage and environmental issues. The fundamental knowledge and the frontier research progress in typical photocatalytic materials, such as TiO2-based and non-TiO2-based photocatalysts, are included in this book. Methods to improve the photocatalytic efficiency and to provide a hint for the rational design of the new photocatalysts are covered.