Download or read book Dissertation Abstracts International written by and published by . This book was released on 1990 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Faculties Publications and Doctoral Theses in Chemistry and Chemical Engineering at United States Universities written by American Chemical Society. Committee on Professional Training and published by . This book was released on 1991 with total page 1646 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Toxicological Profile for Polycyclic Aromatic Hydrocarbons written by and published by . This book was released on 1995 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Polycyclic Aromatic Hydrocarbons written by Bjorseth and published by CRC Press. This book was released on 1985-12-06 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume concerns sources of polycyclic aromatic hydrocarbons (PAH), their emission factors, and relative importance. It deals with exposure, uptake, metabolism, and detection of PAH in the human body. The volume contains an update of information in environmental and biochemical studies of PAH.

Download or read book Frontiers in Chemical Engineering written by National Research Council and published by National Academies Press. This book was released on 1988-02-01 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the next 10 to 15 years, chemical engineers have the potential to affect every aspect of American life and promote the scientific and industrial leadership of the United States. Frontiers in Chemical Engineering explores the opportunities available and gives a blueprint for turning a multitude of promising visions into realities. It also examines the likely changes in how chemical engineers will be educated and take their place in the profession, and presents new research opportunities.

Download or read book Toxicological Profile for Naphthalene 1 methylnaphthalene and 2 methylnaphthalene written by and published by . This book was released on 2005 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Nano and Bio Based Technologies for Wastewater Treatment written by Elvis Fosso-Kankeu and published by John Wiley & Sons. This book was released on 2019-05-21 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents recent challenges related to new forms of pollution from industries and discusses adequate state-of-the-art technologies capable to remediate such forms of pollution. Over the past few decades the boom in the industrial sector has contributed to the release in the environment of pollutants that have no regulatory status and which may have significant impact on the health of humans and animals. These pollutants also referred to as "emerging pollutants", are mostly aromatic compounds which derive from excretion of pharmaceutical, industrial effluents and municipal discharge. It is recurrent these days to find water treatment plants which no longer produce water that fits the purpose of domestic consumption based on newly established guidelines. This situation has prompted water authorities and researchers to develop tools for proper prediction and control of the dispersion of pollutants in the environment to ensure that appropriate measures are taken to prevent the occurrence of outbreaks due to sudden load of these pollutants in the water system. The chapters in this book cover a wide range of nano and bio-based techniques that have been designed for the real time detection of emerging contaminants in environmental water sources, geochemical models that are continuously improved for the prediction of inorganic contaminants migration from the mine solid wastes into ground and surface waters. Remediation strategies are also discussed and include effective techniques based on nanotechnology, advanced membrane filtration, oxidative and bio-degradation processes using various types of nanocatalysts, biocatalysts or supporting polymer matrices which are under advanced investigations for their implementation at large scale for the removal of recalcitrant pollutants from polluted water. Nano and Bio-Based Technologies for Wastewater Treatment: Prediction and Control Tools for the Dispersion of Pollutants in the Environment is divided is two sections. The first section covers the occurrence of emerging pollutants in environmental water while the second section covers state-of-the-art research on the removal of emerging pollutants from water using sustainable technologies. A total of 13 chapters addressing various topics related to the two sections are essentially based on recent developments in the respective field which could have a significant impact on the enhancement of the performance of wastewater treatment plants around the world, and especially in developing countries where access to clean and safe water remains a daily challenge.

Download or read book Carbon Based Material for Environmental Protection and Remediation written by Mattia Bartoli and published by BoD – Books on Demand. This book was released on 2020-08-19 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: Carbon-Based Material for Environmental Protection and Remediation presents an overview of carbon-based technologies and processes, and examines their usefulness and efficiency for environmental preservation and remediation. Chapters cover topics ranging from pollutants removal to new processes in materials science. Written for interested readers with strong scientific and technological backgrounds, this book will appeal to scientific advisors at private companies, academics, and graduate students.

Download or read book Sample Preparation Techniques in Analytical Chemistry written by Somenath Mitra and published by John Wiley & Sons. This book was released on 2004-04-07 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of accurate sample preparation techniques cannot be overstated--meticulous sample preparation is essential. Often overlooked, it is the midway point where the analytes from the sample matrix are transformed so they are suitable for analysis. Even the best analytical techniques cannot rectify problems generated by sloppy sample pretreatment. Devoted entirely to teaching and reinforcing these necessary pretreatment steps, Sample Preparation Techniques in Analytical Chemistry addresses diverse aspects of this important measurement step. These include: * State-of-the-art extraction techniques for organic and inorganic analytes * Sample preparation in biological measurements * Sample pretreatment in microscopy * Surface enhancement as a sample preparation tool in Raman and IR spectroscopy * Sample concentration and clean-up methods * Quality control steps Designed to serve as a text in an undergraduate or graduate level curriculum, Sample Preparation Techniques in Analytical Chemistry also provides an invaluable reference tool for analytical chemists in the chemical, biological, pharmaceutical, environmental, and materials sciences.

Download or read book Handbook of Solid Phase Microextraction written by Janusz Pawliszyn and published by Elsevier. This book was released on 2011-12-01 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: The relatively new technique of solid phase microextraction (SPME) is an important tool to prepare samples both in the lab and on-site. SPME is a "green" technology because it eliminates organic solvents from analytical laboratory and can be used in environmental, food and fragrance, and forensic and drug analysis. This handbook offers a thorough background of the theory and practical implementation of SPME. SPME protocols are presented outlining each stage of the method and providing useful tips and potential pitfalls. In addition, devices and fiber coatings, automated SPME systems, SPME method development, and In Vivo applications are discussed. This handbook is essential for its discussion of the latest SPME developments as well as its in depth information on the history, theory, and practical application of the method. - Practical application of Solid Phase Microextraction methods including detailed steps - Provides history of extraction methods to better understand the process - Suitable for all levels, from beginning student to experienced practitioner

Download or read book Industrial Environmental Chemistry written by Donald T. Sawyer and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph consists of manuscripts submitted by invited speakers who participated in the symposium "Industrial Environmental Chemistry: Waste Minimization in Industrial Processes and Remediation of Hazardous Waste," held March 24-26, 1992, at Texas A&M University. This meeting was the tenth annual international symposium sponsored by the Texas A&M Industry-University Cooperative Chemistry Program (IUCCP). The program was developed by an academic-industrial steering committee consisting of the co-chairmen, Professors Donald T. Sawyer and Arthur E. Martell of the Texas A&M University Chemistry Department, and members appointed by the sponsoring companies: Bernie A. Allen, Jr., Dow Chemical USA; Kirk W. Brown, Texas A&M University; Abraham Clearfield, Texas A&M University; Greg Leyes, Monsanto Company; Jay Warner, Hoechst-Celanese Corporation; Paul M. Zakriski, BF Goodrich Company; and Emile A. Schweikert, Texas A&M University (IUCCP Coordinator). The subject of this conference reflects the interest that has developed in academic institutions and industry for technological solutions to environmental contamination by industrial wastes. Progress is most likely with strategies that minimize waste production from industrial processes. Clearly the key to the protection and preservation of the environment will be through R&D that optimizes chemical processes to minimize or eliminate waste streams. Eleven of the papers are directed to waste minimization. An additional ten papers discuss chemical and biological remediation strategies for hazardous wastes that contaminate soils, sludges, and water.

Download or read book Arsenic Treatment Technologies for Soil Waste and Water written by and published by DIANE Publishing. This book was released on 2002 with total page 132 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Treatment of Micropollutants in Water and Wastewater written by Jurate Virkutyte and published by IWA Publishing. This book was released on 2010-08-14 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last few years there has been a growing concern over the increasing concentration of micropollutants originating from a great variety of sources including pharmaceutical, chemical engineering and personal care product industries in rivers, lakes, soil and groundwater. As most of the micropollutants are polar and persistent compounds, they are only partially or not at all removed from wastewater and thus can enter the environment posing a great risk to the biota. It is hypothesized that wastewater is one of the most important point sources for micropollutants. Treatment of Micropollutants in Water and Wastewater gives a comprehensive overview of modern analytical methods and will summarize novel single and hybrid methods to remove continuously emerging contaminants - micropollutants from the aqueous phase. New trends (e.g. sensor technology, nanotechnology and hybrid treatment technologies) are described in detail. The book is very timely because the new techniques are still in the development phase and have to be realized not only in the laboratory but also on a larger scale. The content of the book is divided into chapters that present current descriptive and analytical methods that are available to detect and measure micropollutants together with detailed information on various chemical, biological and physicochemical methods that have evolved over the last few decades. Treatment of Micropollutants in Water and Wastewater will also enable readers to make well informed choices through providing an understanding of why and how micropollutants must be removed from water sources, and what are the most appropriate and available techniques for providing a cost and technologically effective and sustainable solutions for reaching the goal of micropollutant-free water and wastewater. The book will be suitable for water and wastewater professionals as well for students and researchers in civil engineering, environmental engineering and process engineering fields.

Download or read book Air Pollution and Greenhouse Gases written by Zhongchao Tan and published by Springer. This book was released on 2016-09-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook discusses engineering principles relating to air pollution and greenhouse gases (GHGs); it focuses on engineering principles and designs of related devices and equipment for air emission control for a variety of industries such as energy, chemical, and transportation industries. The book aims primarily at senior undergraduate and graduate students in mechanical, chemical and/or environmental engineering departments; it can also be used as a reference book by technical staff and design engineers who are interested in and need to have technical knowledge in air pollution and GHGs. The book is motivated by recent rapid advances in air pollution and greenhouse gas emissions and their control technologies. In addition to classic topics related to air pollution, this book is also featured with emerging topics related to air pollution and GHGs. It covers recent advances in engineering approaches to the reduction of GHG emissions including, but are not limited to, green energy technologies and carbon sequestration and storage. It also introduces an emerging topic in air pollution, which is referred to as Nano Air Pollution. It is a growing concern in air pollution, but largely missing in similar books, likely because of recent rapid advances in nanotechnology has outpaced the advances in nano air pollution control.

Download or read book Diesel and Gasoline Engine Exhausts and Some Nitroarenes written by IARC Working Group on the Evaluation of Carcinogenic Risks to Humans and published by IARC Monographs on the Evaluat. This book was released on 2015-06-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of the IARC Monographs provides evaluations of the carcinogenicity of diesel and gasoline engine exhausts, and of 10 nitroarenes found in diesel engine exhaust: 3,7-dinitrofluoranthene, 3,9-dinitrofluoranthene, 1,3-dinitropyrene, 1,6-dinitropyrene, 1,8-dinitropyrene, 6-nitrochrysene, 2-nitrofluorene, 1-nitropyrene, 4-nitropyrene, and 3-nitrobenzanthrone. Diesel engines are used for transport on and off roads (e.g. passenger cars, buses, trucks, trains, ships), for machinery in various industrial sectors (e.g. mining, construction), and for electricity generators, particularly in developing countries. Gasoline engines are used in cars and hand-held equipment (e.g. chainsaws). The emissions from such combustion engines comprise a complex and varying mixture of gases (e.g. carbon monoxide, nitrogen oxides), particles (e.g. PM10, PM2.5, ultrafine particles, elemental carbon, organic carbon, ash, sulfate, and metals), volatile organic compunds (e.g. benzene, formaldehyde) and semi-volatile organic compounds (e.g. polycyclic aromatic hydrocarbons) including oxygenated and nitrated derivatives of polycyclic aromatic hydrocarbons. Diesel and gasoline engines thus make a significant contribution to a broad range of air pollutants to which people are exposed in the general population as well as in different occupational settings. An IARC Monographs Working Group reviewed epidemiological evidence, animal bioassays, and mechanistic and other relevant data to reach conclusions as to the carcinogenic hazard to humans of environmental or occupational exposure to diesel and gasoline engine exhausts (including those associated with the mining, railroad, construction, and transportation industries) and to 10 selected nitroarenes. -- Back cover.

Download or read book Chemical Oxidation Applications for Industrial Wastewaters written by Olcay Tunay and published by IWA Publishing. This book was released on 2010-10-12 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the most recent scientific and technological developments (state-of-the-art) in the field of chemical oxidation processes applicable for the efficient treatment of biologically-difficult-to-degrade, toxic and/or recalcitrant effluents originating from different manufacturing processes. It is a comprehensive review of process and pollution profiles as well as conventional, advanced and emerging treatment processes & technologies developed for the most relevant and pollution (wet processing)-intensive industrial sectors. It addresses chemical/photochemical oxidative treatment processes, case-specific treatability problems of major industrial sectors, emerging (novel) as well as pilot/full-scale applications, process integration, treatment system design & sizing criteria (figure-of-merits), cost evaluation and success stories in the application of chemical oxidative treatment processes. Chemical Oxidation Applications for Industrial Wastewaters is an essential reference for lecturers, researchers, industrial and environmental engineers and practitioners working in the field of environmental science and engineering. Visit the IWA WaterWiki to read and share material related to this title: http://www.iwawaterwiki.org/xwiki/bin/view/Articles/CHEMICALOXIDATIONAPPLICATIONSFORINDUSTRIALWASTEWATERS Authors: Professor Olcay Tünay, Professor Isik Kabdasli, Associate Professor Idil Arslan-Alaton and Assistant Professor Tugba Ölmez-Hanci, Environmental Engineering Department, Istanbul Technical University, Turkey.

Download or read book Persistent Organic Pollutants and Toxic Metals in Foods written by Martin Rose and published by Elsevier. This book was released on 2013-05-15 with total page 514 pages. Available in PDF, EPUB and Kindle. Book excerpt: Persistent organic pollutants (POPs) and toxic elements, such as dioxins, flame retardants, lead and mercury, are substances of major concern for the food industry, the regulator and the public. They persist in the environment, accumulate in food chains and may adversely affect human health if ingested over certain levels or with prolonged exposure. Persistent organic pollutants and toxic metals in foods explores the scientific and regulatory challenges of ensuring that our food is safe to eat.Part one provides an overview of regulatory efforts to screen, monitor and control persistent organic pollutants and heavy metals in foods and includes case studies detailing regulatory responses to food contamination incidents. Part two moves on to highlight particular POPs, toxic metals and metalloids in foods, including dioxins and polychlorinated biphenyls (PCBs), mercury, polycyclic aromatic hydrocarbons (PAHs) and phthalates.Persistent organic pollutants and toxic metals in foods is a standard reference for those in the food industry responsible for food safety, laboratories testing for food chemical safety, regulatory authorities responsible for ensuring the safety of food, and researchers in industry and academia interested in the science supporting food chemical safety. - Includes case studies which detail regulatory responses to food contamination incidents - Considers the uptake and transfer of persistent organic pollutants in the food chain and the risk assessment of contaminates in food - Details perticular persistent organic pollutants, toxic metals and metalloids in foods including polychlorinated biphenyls (PCBs), per- and polyfluoroalkyl substances (PFASs), mercury and arsenic among others