Download or read book Phase Transitions in Solids Under High Pressure written by Vladimir Davydovich Blank and published by CRC Press. This book was released on 2013-10-25 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of high-pressure techniques has become popular for studying the nature of substances and phenomena occurring in them, especially as a means of obtaining new materials (synthesis under high pressure) and processing known materials (hydroextrusion). A product of many years of research by the authors and their colleagues, Phase Transitions in Solids under High Pressure discusses the relationships of phase transformations in solids under high pressure, the mechanism of these transformations, crystal geometry, the effect of deformation, the conditions of formation, and preservation of the high-pressure phases under normal pressure. The book begins with an introduction that describes the relationship of the thermodynamics of phase transformations and the kinetics of the transformations. This is followed by a chapter explaining the equipment and mostly original procedures for investigating phase transformation in solids under high hydrostatic and quasi-hydrostatic pressures. The book covers phase transformations under high pressure in a wide temperature range in the elements carbon, silicon, germanium, titanium, zirconium, iron, gallium, and cerium as well as in titanium- and iron-based alloys and AIBVII, AIIBVI, and AIIIBV compounds. In addition, the book examines the kinetics of phase transformations in iron-based alloys in isobaric–isothermal conditions. The authors present results for phase transformations in deformation under high pressure, describe several non-trivial effects associated with phase transformations under high pressure, and analyze the kinetics and hysteresis of high-temperature and low-temperature phase transformations. They conclude by describing the role of investigations under high pressure for determining general relationships governing phase transformations in solids.
Download or read book High Pressure Phase Transformations written by Evgeniĭ I︠U︡rʹevich Tonkov and published by CRC Press. This book was released on 1992 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive handbook comprising two volumes, High Pressure Phase Transformations classifies and systemizes data on phase transformations of 2,263 elements and compounds under high pressure (at least 0.1 GPa). Each compound has a separate paragraph and bibliography that includes information on the behavior of the material under normal pressure. A critical analysis is made of experimental data on melting, first- and second-order phase transitions, crystal stuctures and phase diagrams, and data on new materials and compounds synthesized under high pressure are presented and discussed.
Download or read book High Pressure Structural Phase Transitions in Solids written by Rajeev Ahuja and published by Elsevier Science Limited. This book was released on 2013-06-30 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Transformations of Elements Under High Pressure written by E. Yu Tonkov and published by CRC Press. This book was released on 2018-10-08 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: As laboratories replace heavy hydraulic presses and bulky high-pressure chambers with miniature diamond anvils, traditional heaters with laser heating, and continue to improve methods of shock compression, there has been considerable new data obtained from the high-pressure, high-temperature modification of pure elements. The dense metallic modification of elements shows the potential for achieving superconductivity akin to theoretical predictions. Phase Transformations of Elements Under High Pressure contains the latest theoretical and experimental information on nearly 100 elements, including first-and second-phase transitions, melting lines, crystal structures of stable and metastable phases, stability of polymorphic modifications, and other useful properties and data. It emphasizes features such as changes in the liquid state, amorphization, and metallization, and provides temperature-pressure diagrams for every element. The book also describes the transitions of polymeric forms of fullerene, crystal modifications of elements stable under high pressures, and provides data that confirms their superconducting and magnetic properties. This handbook will be a lasting reference for scientists in a broad range of disciplines, including solid-state physics, chemistry, crystallography, mineralogy, and materials science.
Download or read book Pressure Induced Phase Transformations Volume II written by Daniel Errandonea and published by Mdpi AG. This book was released on 2023-08-25 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of phase transitions in materials under high pressure and high temperature is a very active research field. In the last few decades, many important discoveries have been made thanks to the development of experimental techniques and computer simulation methods. Many of these achievements affect various research fields ranging from solid-state physics, chemistry, and materials science to geophysics. They not only involve deepening knowledge on solid-solid phase transitions, but also a better understanding of melting under compression. These modern discoveries, as well as the impact of pressure on structural, chemical, and physical properties, are central to the current Special Issue. Amongst other topics, it places particular emphasis on phase transitions and their effects on different physical properties.
Download or read book Phase Transitions in Solids written by Chintamani Nagesa Ramachandra Rao and published by McGraw-Hill Companies. This book was released on 1978 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Physics of Phase Transitions written by Pierre Papon and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Physics of Phase Transitions occupies an important place at the crossroads of several fields central to materials sciences. This second edition incorporates new developments in the states of matter physics, in particular in the domain of nanomaterials and atomic Bose-Einstein condensates where progress is accelerating. New information and application examples are included. This work deals with all classes of phase transitions in fluids and solids, containing chapters on evaporation, melting, solidification, magnetic transitions, critical phenomena, superconductivity, and more. End-of-chapter problems and complete answers are included.
Download or read book New Kinds of Phase Transitions Transformation in Disordered Substances written by V.V. Brazhkin and published by Springer Science & Business Media. This book was released on 2002-08-31 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the NATO Advanced Research Workshop, held in Volga River, Russia, 24-28 May 2001
Download or read book Phase Transitions For Beginners written by Stishov Sergei M and published by World Scientific. This book was released on 2018-10-02 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an experimentalist famous for his discovery of stishovite, with vast experience in phase transition studies, this book is devoted to a description of the continuous and discontinuous phase transitions. It includes chapters outlining the Van der Waals model, hard sphere and soft sphere models of melting, scaling phenomena, renormgroup approach to phase transitions, and experimental examples to illustrate various phase transitions.Unlike conventional books covering the same topic, this is meant for undergraduate students and experimentalists to understand basic concepts in the physics of phase transitions.
Download or read book Phase Transformations and Material Instabilities in Solids written by Morton Gurtin and published by Elsevier. This book was released on 2012-12-02 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase Transformations and Material Instabilities in Solids contains the proceedings of an interdisciplinary conference on phase transitions and material instabilities in solids, conducted by the Mathematics Research Center of the University of Wisconsin-Madison on October 11-13, 1983 in Madison, Wisconsin. The papers explore phase transformations and material instabilities in solids and cover topics ranging from equilibrium shapes of surfaces to morphological instabilities and dendrite formation. Shock-induced phase transitions are also considered. Comprised of 11 chapters, this book begins with a discussion on material instabilities and the calculus of variations, followed by an analysis of mechanical analogs of coexistent phases. A model for the formation of shear bands in simple shear that involves the description of irreversible mechanical shear and the resulting heat release is then presented. Subsequent chapters focus on the Cauchy and Born hypotheses for crystals; the arrangement of coherent phases in a loaded body; one-dimensional shock layers in Korteweg fluids; and dynamics of first-order phase transitions. The final chapter deals with equilibrium shapes of surfaces and grain boundaries. This monograph will be of interest to students, practitioners, and researchers in mathematics and statistical physics.
Download or read book The Effects of High Pressures and Low Temperatures on Phase Transitions in Solids written by Donald Richard Stevenson and published by . This book was released on 1957 with total page 124 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Tungsten written by Erik Lassner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why does someone write a book about Tungsten? There are several reasons and precedents for this, the most important of which is that the last book on tungsten was written more than 20 years ago, in 1977, by St. W H. Yih and Ch T. Wang. During the intervening period there have been many new scientific and technological developments and innova tions, so it was not only our opinion but the view of many other members of the "tungsten family" that it was time to start writing a new book about tungsten. Preparations of the new book began in 1994. further impetus to the project was provided by the realization that in spite of this new knowledge having been presented at seminars or published in the technical press, a general acknowledgement of it by the majority of technicians and scientists is still far from being realized. It is our hope that this book will significantly contribute to a broader acceptance of recent scientific and technological innovations. An important prerequisite for such a project is the availability of a recently retired, experienced person willing to devote his time and talents to the tedious part of the exercise.
Download or read book Proceedings of the International Conference on Martensitic Transformations Chicago written by Aaron P. Stebner and published by Springer. This book was released on 2018-04-11 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection is organized around the central theme of “Martensite by Design.” Contributions include design, microstructure, properties, advanced processing and manufacturing, performance, phase transformations, and characterization.
Download or read book Phase Transitions in Materials written by Brent Fultz and published by Cambridge University Press. This book was released on 2020-05-14 with total page 609 pages. Available in PDF, EPUB and Kindle. Book excerpt: The new edition of this popular textbook provides a fundamental approach to phase transformations and thermodynamics of materials. Explanations are emphasised at the level of atoms and electrons, and it comprehensively covers the classical topics from classical metallurgy to nanoscience and magnetic phase transitions. The book has three parts, covering the fundamentals of phase transformations, the origins of the Gibbs free energy, and the major phase transformations in materials science. A fourth part on advanced topics is available online. Much of the content from the first edition has been expanded, notably precipitation transformations in solids, heterogeneous nucleation, and energy, entropy and pressure. Three new chapters have been added to cover interactions within microstructures, surfaces, and solidification. Containing over 170 end-of-chapter problems, it is a valuable companion for graduate students and researchers in materials science, engineering, and applied physics.
Download or read book First Order Phase Transitions of Magnetic Materials written by Praveen Chaddah and published by CRC Press. This book was released on 2017-11-22 with total page 174 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces new concepts in the phenomenon of 1st order phase transitions. It discusses the concept of kinetic arrest at a certain temperature, with this temperature being dependent on the second control variable (magnetic field, or pressure). It discusses interesting manifestations of this phenomenon when the 1st order transition is broadened, i.e. occurs over a finite range of temperatures. Many examples of this phenomenon, observed recently in many materials, will also be discussed.
Download or read book Phase Transitions and Relaxation in Systems with Competing Energy Scales written by T. Riste and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Systems with competing energy scales are widespread and exhibit rich and subtle behaviour, although their systematic study is a relatively recent activity. This text presents lectures given at a NATO Advanced Study Institute reviewing the current knowledge and understanding of this fascinating subject, particularly with regard to phase transitions and dynamics, at an advanced tutorial level. Both general and specific aspects are considered, with competitions having several origins; differences in intrinsic interactions, interplay between intrinsic and extrinsic effects, such as geometry and disorder; irreversibility and non-equilibration. Among the specific physical application areas are supercooled liquids and glasses, high-temperature superconductors, flux or vortex pinning and motion, charge density waves, domain growth and coarsening, and electron solidification.
Download or read book Phase Transformations in Materials written by G. Kostorz and published by Wiley-VCH. This book was released on 2001-10-25 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: For all kinds of materials, phase transformations show common phenomena and mechanisms, and often turn a material, for example metals, multiphase alloys, ceramics or composites, into its technological useful form. The physics and thermodynamics of a transformation from the solid to liquid state or from one crystal form to another are therefore essential for creating high-performance materials. This handbook covers phase transformations, a general phenomenon central to understanding the behavior of materials and for creating high-performance materials. It will be an essential reference for all materials scientists, physicists and engineers involved in the research and development of new high performance materials. It is the revised and enhanced edition of the renowned book edited by the late P. Haasen in 1990 (Vol. 5, Materials Science and Technology).
