Download or read book Phase locked and Frequency feedback Systems written by Jacob Klapper and published by . This book was released on 1972 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Frequency Acquisition Techniques for Phase Locked Loops written by Daniel B. Talbot and published by John Wiley & Sons. This book was released on 2012-08-24 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to acquire the input frequency from an unlocked state A phase locked loop (PLL) by itself cannot become useful until it has acquired the applied signal's frequency. Often, a PLL will never reach frequency acquisition (capture) without explicit assistive circuits. Curiously, few books on PLLs treat the topic of frequency acquisition in any depth or detail. Frequency Acquisition Techniques for Phase Locked Loops offers a no-nonsense treatment that is equally useful for engineers, technicians, and managers. Since mathematical rigor for its own sake can degenerate into intellectual "rigor mortis," the author introduces readers to the basics and delivers useful information with clear language and minimal mathematics. With most of the approaches having been developed through years of experience, this completely practical guide explores methods for achieving the locked state in a variety of conditions as it examines: Performance limitations of phase/frequency detector–based phase locked loops The quadricorrelator method for both continuous and sampled modes Sawtooth ramp-and-sample phase detector and how its waveform contains frequency error information that can be extracted The benefits of a self-sweeping, self-extinguishing topology Sweep methods using quadrature mixer-based lock detection The use of digital implementations versus analog Frequency Acquisition Techniques for Phase Locked Loops is an important resource for RF/microwave engineers, in particular, circuit designers; practicing electronics engineers involved in frequency synthesis, phase locked loops, carrier or clock recovery loops, radio-frequency integrated circuit design, and aerospace electronics; and managers wanting to understand the technology of phase locked loops and frequency acquisition assistance techniques or jitter attenuating loops. Errata can be found by visiting the Book Support Site at: http://booksupport.wiley.com
Download or read book Designing Phase locked Loop Based FM and BPSK Detectors written by Chirag Saurabh Bhavsar and published by . This book was released on 2006 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Application of Analog Electronic Circuits to Biomedical Instrumentation Second Edition written by Robert B. Northrop and published by CRC Press. This book was released on 2012-03-02 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Application of Analog Electronic Circuits to Biomedical Instrumentation, Second Edition helps biomedical engineers understand the basic analog electronic circuits used for signal conditioning in biomedical instruments. It explains the function and design of signal conditioning systems using analog ICs—the circuits that enable ECG, EEG, EMG, ERG, tomographic images, biochemical spectrograms, and other crucial medical applications. This book demonstrates how op amps are the keystone of modern analog signal conditioning system design and illustrates how they can be used to build instrumentation amplifiers, active filters, and many other biomedical instrumentation systems and subsystems. It introduces the mathematical tools used to describe noise and its propagation through linear systems, and it looks at how signal-to-noise ratios can be improved by signal averaging and linear filtering. Features Analyzes the properties of photonic sensors and emitters and the circuits that power them Details the design of instrumentation amplifiers and medical isolation amplifiers Considers the modulation and demodulation of biomedical signals Examines analog power amplifiers, including power op amps and class D (switched) PAs Describes wireless patient monitoring, including Wi-Fi and Bluetooth communication protocols Explores RFID, GPS, and ultrasonic tags and the design of fractal antennas Addresses special analog electronic circuits and systems such as phase-sensitive rectifiers, phase detectors, and IC thermometers By explaining the "building blocks" of biomedical systems, the author illustrates the importance of signal conditioning systems in the devices that gather and monitor patients’ critical medical information. Fully revised and updated, this second edition includes new chapters, a glossary, and end-of-chapter problems. What’s New in This Edition Updated and revised material throughout the book A chapter on the applications, circuits, and characteristics of power amplifiers A chapter on wireless patient monitoring using UHF telemetry A chapter on RFID tags, GPS tags, and ultrasonic tags A glossary to help you decode the acronyms and terms used in biomedical electronics, physiology, and biochemistry New end-of-chapter problems and examples
Download or read book Final Report on the Relay I Program written by Goddard Space Flight Center and published by . This book was released on 1965 with total page 776 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book NOAA Technical Report NESS written by and published by . This book was released on 1970 with total page 1010 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Analysis and Application of Analog Electronic Circuits to Biomedical Instrumentation written by Robert B. Northrop and published by CRC Press. This book was released on 2003-12-29 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the basic mathematical tools used to describe noise and its propagation through linear systems and provides a basic description of the improvement of signal-to-noise ratio by signal averaging and linear filtering. The text also demonstrates how op amps are the keystone of modern analog signal conditioning systems design, and il
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1979 with total page 1074 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book CREG Journal Archive 15 to 25 written by Mike Bedford (editor) and published by Lulu.com. This book was released on 2012 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Cellular Mobile Communication written by Gottapu Sasibhushana Rao and published by Pearson Education India. This book was released on 2012-01-01 with total page 937 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mobile Cellular Communication covers all the important aspects of cellular and mobile communications from the Internet to signals, access protocols and cellular systems and is a self-sufficient resource with adequate stress on the principles that govern the behavior of mobile communication along with the applications. The book includes applications such as designing/planning/ installation and maintenance of cellular operators, I-FI, and WIMAX, ZIBEE, BLUETOOTH and GPRS networks. It also includes advanced technologies like CDMA 2000, WCDMA, 3G, 4G and beyond 4G and contains 160 examples and 540 exercises.
Download or read book Design and Development of Medical Electronic Instrumentation written by David Prutchi and published by John Wiley & Sons. This book was released on 2004-11-22 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Development of Medical Electronic Instrumentation fills a gap in the existing medical electronic devices literature by providing background and examples of how medical instrumentation is actually designed and tested. The book includes practical examples and projects, including working schematics, ranging in difficulty from simple biopotential amplifiers to computer-controlled defibrillators. Covering every stage of the development process, the book provides complete coverage of the practical aspects of amplifying, processing, simulating and evoking biopotentials. In addition, two chapters address the issue of safety in the development of electronic medical devices, and providing valuable insider advice.
Download or read book Radio Receiver Design written by Robert Dixon and published by CRC Press. This book was released on 1998-08-27 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a fundamental understanding of current as well as future concepts and techniques essential for systematically defining and manufacturing a receiver that is flexible yet functional in today's world. An excellent introduction to communications and the role of receivers in conveying information.
Download or read book Digital Communications Using Chaos and Nonlinear Dynamics written by Jia-Ming Liu and published by Springer Science & Business Media. This book was released on 2006-11-22 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a summary of the research conducted at UCLA, Stanford University, and UCSD over the last ?ve years in the area of nonlinear dyn- ics and chaos as applied to digital communications. At ?rst blush, the term “chaotic communications” seems like an oxymoron; how could something as precise and deterministic as digital communications be chaotic? But as this book will demonstrate, the application of chaos and nonlinear dynamicstocommunicationsprovidesmanypromisingnewdirectionsinareas of coding, nonlinear optical communications, and ultra-wideband commu- cations. The eleven chapters of the book summarize many of the promising new approaches that have been developed, and point the way to new research directions in this ?eld. Digital communications techniques have been continuously developed and re?ned for the past ?fty years to the point where today they form the heart of a multi-hundred billion dollar per year industry employing hundreds of thousands of people on a worldwide basis. There is a continuing need for transmission and reception of digital signals at higher and higher data rates. There are a variety of physical limits that place an upper limit on these data rates, and so the question naturally arises: are there alternative communi- tion techniques that can overcome some of these limitations? Most digital communications today is carried out using electronic devices that are essentially “linear,” and linear system theory has been used to c- tinually re?ne their performance. In many cases, inherently nonlinear devices are linearized in order to achieve a certain level of linear system performance.
Download or read book EPR IMAGING and IN VIVO EPR written by Gareth R. Eaton and published by CRC Press. This book was released on 2018-01-18 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides a detailed examination of the physical basis for EPR imaging and in vivo EPR spectroscopy, experimental arrangements, and data analysis. The EPR imaging methods described include continuous wave, spin-echo-detected and ENDOR-detected EPR with constant, stepped, modulated, and pulsed magnetic field gradients. Applications described include inhomogeneous materials, diffusion kinetics, reaction kinetics, orientation of liquid crystals, microwave distributions, magnetic field distributions, superconductors, radiation damage, and defects in solids. The book also covers other topics important to in vivo studies, including in vivo EPR spectroscopy, low-frequency EPR, state-of-the-art low-frequency EPR instruments, achievable sensitivity, and spin labels. The book will be of great interest to graduate students, researchers, and medical instrument developers who use EPR, as well as clinicians and chemists interested in the relationship between in vivo radicals (such as superoxide and diseases).
Download or read book Telecommunication Principles written by J. J. O Reilly and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 151 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a first introduction to the subject of telecommunications suit able for first and second year undergraduates following degree or similar courses in electronic engineering. There are very few specific prerequisites other than a general background in electric circuit principles and a level of mathematical maturity consistent with entry to engineering courses in British universities. The intention is to provide a broad perspective of modern telecommunication principles and applications. Following a general overview of telecommunications, a thorough, albeit introductory, treatment is provided of underlying principles such as signal representation and analysis, sampling, analogue and digital trans of several mission, modulation and coding. The book concludes with a description important systems applications which serve as case studies to illustrate further the principles introduced and demonstrate their application in a practical context. Many people have contributed, directly and indirectly, to this book. I am espe cially grateful to Professor Kel Fidler of the Open University for suggesting that I write the book and for the support and guidance he has provided throughout the endeavour. The Telecommunications Research Group of the Department of Elec trical Engineering Science at the University of Essex has provided a stimulating environment in which to develop my appreciation of telecommunication systems and in particular Professor Ken Cattermole has influenced my thinking greatly.
Download or read book Newnes Communications Technology Handbook written by Geoff Lewis and published by Elsevier. This book was released on 2013-10-22 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: Newnes Communications Technology Handbook provides a discussion on different topics relevant to communications technology. The book is comprised of 39 chapters that tackle a wide variety of concern in communications technology. The coverage of the text includes technologies, such as analog digital communications systems, radio frequency receiver, and satellite systems. The book also discusses some methods and techniques used in communications technology, including mixer signal processing, modulation and demodulation, and spread spectrum techniques. The text will be of great use to engineers, technicians, and professionals involved in telecommunications.
Download or read book MicroCMOS Design written by Bang-Sup Song and published by CRC Press. This book was released on 2017-12-19 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: MicroCMOS Design covers key analog design methodologies with an emphasis on analog systems that can be integrated into systems-on-chip (SoCs). Starting at the transistor level, this book introduces basic concepts in the design of system-level complementary metal-oxide semiconductors (CMOS). It uses practical examples to illustrate circuit construction so that readers can develop an intuitive understanding rather than just assimilate the usual conventional analytical knowledge. As SoCs become increasingly complex, analog/radio frequency (RF) system designers have to master both system- and transistor-level design aspects. They must understand abstract concepts associated with large components, such as analog-to-digital converters (ADCs) and phase-locked loops (PLLs). To help readers along, this book discusses topics including: Amplifier basics & design Operational amplifier (Opamp) Data converter basics Nyquist-rate data converters Oversampling data converters High-resolution data converters PLL basics Frequency synthesis and clock recovery Focused more on design than analysis, this reference avoids lengthy equations and instead helps readers acquire a more hands-on mastery of the subject based on the application of core design concepts. Offering the needed perspective on the various design techniques for data converter and PLL design, coverage starts with abstract concepts—including discussion of bipolar junction transistors (BJTs) and MOS transistors—and builds up to an examination of the larger systems derived from microCMOS design.