Download or read book Phase field Simulation of Solidification of Aluminum Alloys written by Atiqur Rahman and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This research is focused on studying the effects of concentration, undercooling rate, and anisotropy on the morphology of dendrites. In this study, four different Phase-Field Models were used to simulate to understand the dendrite evolution during the solidification of an Al-Cu binary alloy by considering various realistic features of the processes. The overall findings from the solidification models indicate that increasing solute concentration delays solute rejection at the interface until a critical point (5.88wt%Cu) and dendrite growth is slower in higher Cu-concentration. At a higher undercooling rate, dendrites grow into a more developed form with pronounced secondary dendrites, and the length of the primary dendritic arm expands with the increase in anisotropic value in a particular direction.
Download or read book Quantitative Phase Field Modelling of Solidification written by Nikolas Provatas and published by CRC Press. This book was released on 2021-10-12 with total page 186 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a study of phase field modelling of solidification in metal alloy systems. It is divided in two main themes. The first half discusses several classes of quantitative multi-order parameter phase field models for multi-component alloy solidification. These are derived in grand potential ensemble, thus tracking solidification in alloys through the evolution of the chemical potentials of solute species rather than the more commonly used solute concentrations. The use of matched asymptotic analysis for making phase field models quantitative is also discussed at length, and derived in detail in order to make this somewhat abstract topic accessible to students. The second half of the book studies the application of phase field modelling to rapid solidification where solute trapping and interface undercooling follow highly non-equilibrium conditions. In this limit, matched asymptotic analysis is used to map phase field evolution equations onto the continuous growth model, which is generally accepted as a sharp-interface description of solidification at rapid solidification rates. This book will be of interest to graduate students and researchers in materials science and materials engineering. Key Features Presents a clear path to develop quantitative multi-phase and multi-component phase field models for solidification and other phase transformation kinetics Derives and discusses the quantitative nature of the model formulations through matched interface asymptotic analysis Explores a framework for quantitative treatment of rapid solidification to control solute trapping and solute drag dynamics
Download or read book Lattice Boltzmann Modeling written by Michael C. Sukop and published by Springer Science & Business Media. This book was released on 2007-04-05 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Here is a basic introduction to Lattice Boltzmann models that emphasizes intuition and simplistic conceptualization of processes, while avoiding the complex mathematics that underlies LB models. The model is viewed from a particle perspective where collisions, streaming, and particle-particle/particle-surface interactions constitute the entire conceptual framework. Beginners and those whose interest is in model application over detailed mathematics will find this a powerful 'quick start' guide. Example simulations, exercises, and computer codes are included.
Download or read book A Phase field Model for Technical Alloy Solidification written by Janin Eiken and published by . This book was released on 2010 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase field simulations of multi component solidification and coarsening based on thermodynamic datasets written by Schulz, Sebastian and published by KIT Scientific Publishing. This book was released on 2017-02-22 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: The utilization of thermodynamic and mobility data plays a major role in phase-field modeling. This work discusses different formulations for the thermodynamic quantities of a grand potential model along with practices to determine parameters from datasets. The framework is used to study solidification of Al-Si-Mg for a variation of composition, diffusivities and surface energy anisotropies. To verify the simulations, they are compared with solidification theories.
Download or read book Solidification Processing of Metallic Alloys Under External Fields written by Dmitry G. Eskin and published by Springer. This book was released on 2018-10-09 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the application of external physical fields to the solidification processing of metallic alloys. Leading academics from around the world present comprehensive and critical reviews on state-of-the-art research and discuss possible future directions. Major physical fields, including electromagnetic, electric, acoustic, and thermal, are considered. In addition, the most advanced synchrotron X-ray based real-time and in-situ studies and numerical modeling methodologies are reviewed and discussed, with a special emphasis on their applications to the solidification processes. Throughout, all chapters are illustrated with both historical and very recent research cases, including typical examples of in-situ studies, modeling, and simulation. This book contains essential knowledge and information suitable for a wide audience, from undergraduate and postgraduate students to academics, practicing researchers, and engineers in materials, metallurgy, and manufacturing.
Download or read book Phase field Simulations of Rapid Solidification in Binary Alloys written by Jun Fan and published by . This book was released on 2005 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Casting Aluminum Alloys written by Michael V Glazoff and published by Elsevier. This book was released on 2010-07-07 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: Casting Aluminum Alloys summarizes research conducted at Moscow Institute of Steel and Alloy during many decades in part together with Alcoa Inc. The research covered areas of the structure, properties, thermal resistance, corrosion and fatigue of aluminum alloys in industrial manufacturing. - Emphasis on interconnection among phase equilibria, thermodynamics and microstructure of alloys - Systematic overview of all phase diagrams with Al that are important for the development of casting aluminium alloys - Diagrams ("processing windows") of important technological properties such as castability, molten metal fluidity, tendency to hot pre-solidification cracking, porosity - Mathematical models for alloy mechanical properties facilitating the down-selection of best prospect candidates for new alloy development - New principles of design of eutectic casting aluminium alloys - Examples of successful novel casting alloy development, including alloys for high-strength applications, alloys with transition metals, and novel alloys utilizing aluminium scrap
Download or read book Phase field Simulations of Non isothermal Binary Alloy Solidification written by Irina Loginova and published by . This book was released on 1999 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase field Simulation Study of Dendritic Grain Growth Competition During Alloy Directional Solidification written by and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Transport Phenomena in Materials Processing written by David R. Poirier and published by Springer. This book was released on 2016-12-06 with total page 653 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides a teachable and readable approach to transport phenomena (momentum, heat, and mass transport) by providing numerous examples and applications, which are particularly important to metallurgical, ceramic, and materials engineers. Because the authors feel that it is important for students and practicing engineers to visualize the physical situations, they have attempted to lead the reader through the development and solution of the relevant differential equations by applying the familiar principles of conservation to numerous situations and by including many worked examples in each chapter. The book is organized in a manner characteristic of other texts in transport phenomena. Section I deals with the properties and mechanics of fluid motion; Section II with thermal properties and heat transfer; and Section III with diffusion and mass transfer. The authors depart from tradition by building on a presumed understanding of the relationships between the structure and properties of matter, particularly in the chapters devoted to the transport properties (viscosity, thermal conductivity, and the diffusion coefficients). In addition, generous portions of the text, numerous examples, and many problems at the ends of the chapters apply transport phenomena to materials processing.
Download or read book TMS 2020 149th Annual Meeting Exhibition Supplemental Proceedings written by The Minerals, Metals & Materials Society and published by Springer Nature. This book was released on 2020-02-13 with total page 2046 pages. Available in PDF, EPUB and Kindle. Book excerpt: This collection presents papers from the 149th Annual Meeting & Exhibition of The Minerals, Metals & Materials Society.
Download or read book Solidification of Aluminum Alloys written by Men G. Chu and published by Wiley-TMS. This book was released on 2004-03 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume addresses progress in the application of solidificationprinciples to the production of aluminum alloys. Topics includemicrostructure evolution, phase formation and solidification pathanalysis, grain refinement, micro/macro-segregation, mechanicalbehavior/properties in the mushy state, solidificationcracking/tearing, gas/shrinkage porosity formation, effect ofimpurities/trace elements, and the impact of cast structure on thesubsequent fabrication and properties of finished products. Paperson the experimental or theoretical simulation of solidificationaspects of casting processes including direct chill casting,continuous casting, shaped casting, semi-solid processing, andother advanced casting technologies are also included, as well asexamples showing the use of solidification principles to solveindustrial problems. From ahref="http://www.tms.org/Meetings/Annual-04/AnnMtg04Home.html"target="_blank"2004 TMS Annual Meeting/a to be held inCharlotte, North Carolina, March 14 - 18, 2004.
Download or read book Metallurgical Modeling for Aluminum Alloys written by Murat Tirakioglu and published by ASM International(OH). This book was released on 2003 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings from the October 2003 Pittsburgh conference include 28 papers on plasticity, quench and solidification modeling, and microstructure evolution. Researchers from North America and Europe present recent work on computational micromechanical modeling, fatigue crack growth methodologies, mathematical pitfalls, thermal and residual stress analysis, the simulation of local microstructures and thermal growth, elastic strain energy analysis, computer modeling of phase transformations, integral modeling, and other modeling issues. There is no index. Annotation : 2004 Book News, Inc., Portland, OR (booknews.com).
Download or read book Phase field method and integrated computing materials engineering written by Yu-Hong Zhao and published by Frontiers Media SA. This book was released on 2023-04-19 with total page 126 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Phase Field Methods in Materials Science and Engineering written by Nikolas Provatas and published by John Wiley & Sons. This book was released on 2011-07-26 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive and self-contained, one-stop source discusses phase-field methodology in a fundamental way, explaining advanced numerical techniques for solving phase-field and related continuum-field models. It also presents numerical techniques used to simulate various phenomena in a detailed, step-by-step way, such that readers can carry out their own code developments. Features many examples of how the methods explained can be used in materials science and engineering applications.
Download or read book Phase Field Simulation on Microstructure Evolution in Solidification and Aging Process of Squeeze Cast Magnesium Alloy written by and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
