Download or read book Permanent magnet and Brushless DC Motors written by Takashi Kenjō and published by . This book was released on 1985 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small electric motors are crucial to the manufacture of industrial robots, numerically controlled machines, and computer peripherals such as disk drives and printers. In this handbook, Dr. Kenjo considers two of the most important small motors, permanent-magnet and brushless DC motors, explaining how to select the most suitable motor for the the intended application and how to design the drive circuitry. The book provides clear descriptions of the basic machine structure, the constructional relationships between conventional and brushless DC machines, and the drive and control circuitry. Generously illustrated and easy-to-follow.
Download or read book Brushless Motors written by Duane Hanselman and published by . This book was released on 2012-07-01 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brushless Motors: Magnetic Design, Performance and Control is an outgrowth of the author's two previous books on this subject. This book contains significant additional material covering further aspects of magnetic design, performance, and electrical control. The primary goal of this book is to meet the needs of working engineers who have little or no experience in electric motor design and control. The book starts with basic concepts, provides intuitive reasoning for them, and gradually builds a set of understandable concepts that foster the development of usable knowledge. This book strives to provide a basis of knowledge that non-experts can use to develop practical expertise, making them more productive in their work and allowing them to productively explore other approaches to motor design, performance, and electrical control.
Download or read book Permanent Magnet Brushless DC Motor Drives and Controls written by Chang-liang Xia and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced introduction to the simulation and hardware implementation of BLDC motor drives A thorough reference on the simulation and hardware implementation of BLDC motor drives, this book covers recent advances in the control of BLDC motor drives, including intelligent control, sensorless control, torque ripple reduction and hardware implementation. With the guidance of the expert author team, readers will understand the principle, modelling, design and control of BLDC motor drives. The advanced control methods and new achievements of BLDC motor drives, of interest to more advanced readers, are also presented. Focuses on the control of PM brushless DC motors, giving readers the foundations to the topic that they can build on through more advanced reading Systematically guides readers through the subject, introducing basic operational principles before moving on to advanced control algorithms and implementations Covers special issues, such as sensorless control, intelligent control, torque ripple reduction and hardware implementation, which also have applications to other types of motors Includes presentation files with lecture notes and Matlab 7 coding on a companion website for the book
Download or read book Permanent magnet and Brushless DC Motors written by Takashi Kenjō and published by . This book was released on 1985 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Small electric motors are crucial to the manufacture of industrial robots, numerically controlled machines, and computer peripherals such as disk drives and printers. In this handbook, Dr. Kenjo considers two of the most important small motors, permanent-magnet and brushless DC motors, explaining how to select the most suitable motor for the the intended application and how to design the drive circuitry. The book provides clear descriptions of the basic machine structure, the constructional relationships between conventional and brushless DC machines, and the drive and control circuitry. Generously illustrated and easy-to-follow.
Download or read book Brushless Permanent Magnet Motor Design written by Duane C. Hanselman and published by . This book was released on 2003 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explaining techniques for magnetic modelling and circuit analysis, this book shows how magnetic circuit analysis applies to motor design. It describes the major aspects of motor operation and design, and develops design equations for radial flux and axial flux motors. It is intended for electrical, electronics and mechanical engineers.
Download or read book Permanent Magnet Synchronous and Brushless DC Motor Drives written by Ramu Krishnan and published by CRC Press. This book was released on 2017-12-19 with total page 611 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite two decades of massive strides in research and development on control strategies and their subsequent implementation, most books on permanent magnet motor drives still focus primarily on motor design, providing only elementary coverage of control and converters. Addressing that gap with information that has largely been disseminated only in journals and at conferences, Permanent Magnet Synchronous and Brushless DC Motor Drives is a long-awaited comprehensive overview of power electronic converters for permanent magnet synchronous machines and control strategies for variable-speed operation. It introduces machines, power devices, inverters, and control, and addresses modeling, implementation, control strategies, and flux weakening operations, as well as parameter sensitivity, and rotor position sensorless control. Suitable for both industrial and academic audiences, this book also covers the simulation, low cost inverter topologies, and commutation torque ripple of PM brushless DC motor drives. Simulation of the motor drives system is illustrated with MATLAB® codes in the text. This book is divided into three parts—fundamentals of PM synchronous and brushless dc machines, power devices, inverters; PM synchronous motor drives, and brushless dc motor drives. With regard to the power electronics associated with these drive systems, the author: Explores use of the standard three-phase bridge inverter for driving the machine, power factor correction, and inverter control Introduces space vector modulation step by step and contrasts with PWM Details dead time effects in the inverter, and its compensation Discusses new power converter topologies being considered for low-cost drive systems in PM brushless DC motor drives This reference is dedicated exclusively to PM ac machines, with a timely emphasis on control and standard, and low-cost converter topologies. Widely used for teaching at the doctoral level and for industrial audiences both in the U.S. and abroad, it will be a welcome addition to any engineer’s library.
Download or read book Permanent Magnet Synchronous and Brushless DC Motor Drives written by Ramu Krishnan and published by CRC Press. This book was released on 2017-12-19 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: Despite two decades of massive strides in research and development on control strategies and their subsequent implementation, most books on permanent magnet motor drives still focus primarily on motor design, providing only elementary coverage of control and converters. Addressing that gap with information that has largely been disseminated only in journals and at conferences, Permanent Magnet Synchronous and Brushless DC Motor Drives is a long-awaited comprehensive overview of power electronic converters for permanent magnet synchronous machines and control strategies for variable-speed operation. It introduces machines, power devices, inverters, and control, and addresses modeling, implementation, control strategies, and flux weakening operations, as well as parameter sensitivity, and rotor position sensorless control. Suitable for both industrial and academic audiences, this book also covers the simulation, low cost inverter topologies, and commutation torque ripple of PM brushless DC motor drives. Simulation of the motor drives system is illustrated with MATLAB® codes in the text. This book is divided into three parts—fundamentals of PM synchronous and brushless dc machines, power devices, inverters; PM synchronous motor drives, and brushless dc motor drives. With regard to the power electronics associated with these drive systems, the author: Explores use of the standard three-phase bridge inverter for driving the machine, power factor correction, and inverter control Introduces space vector modulation step by step and contrasts with PWM Details dead time effects in the inverter, and its compensation Discusses new power converter topologies being considered for low-cost drive systems in PM brushless DC motor drives This reference is dedicated exclusively to PM ac machines, with a timely emphasis on control and standard, and low-cost converter topologies. Widely used for teaching at the doctoral level and for industrial audiences both in the U.S. and abroad, it will be a welcome addition to any engineer’s library.
Download or read book Brushless Permanent magnet and Reluctance Motor Drives written by Timothy John Eastham Miller and published by Oxford University Press, USA. This book was released on 1989 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: A presentation of the theory of brushless d.c. drives to help engineers appreciate the potential of such motors and apply them more widely, by taking into account developments in permanent-magnet materials, power semiconductors, electronic control and motor design.
Download or read book Brushless Permanent magnet Motor Design written by Duane C. Hanselman and published by McGraw-Hill Companies. This book was released on 1994 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written for electrical, electronics, & mechanical engineers responsible for designing & specifying motors, the book provides details of brushless DC & synchronous motors, as well as both radial & axial motor topologies. Beginning with a discussion of the fundamentals of generic motor design, it logically progresses to a set of more advanced, yet easily understandable, concepts for designing brushless permanent-magnet motors. In addition, the author fully explains techniques for magnetic modeling & circuit analysis, shows how magnetic circuit analysis applies to motor design, describes all major aspects of motor operation & design in simple mathematical terms, develops rigorous design equations for radial flux & axial flux motors, & illustrates basic motor drive schemes. All common motor design terms are clearly defined & a wealth of charts, tables & equations are included.
Download or read book Permanent Magnet Motor Technology written by Jacek F. Gieras and published by CRC Press. This book was released on 2009-08-25 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of permanent magnet (PM) motor technology and its impact on electromechanical drives has grown exponentially since the publication of the bestselling second edition. The PM brushless motor market has grown considerably faster than the overall motion control market. This rapid growth makes it essential for electrical and electromechanical engineers and students to stay up-to-date on developments in modern electrical motors and drives, including their control, simulation, and CAD. Reflecting innovations in the development of PM motors for electromechanical drives, Permanent Magnet Motor Technology: Design and Applications, Third Edition demonstrates the construction of PM motor drives and supplies ready-to-implement solutions to common roadblocks along the way. This edition supplies fundamental equations and calculations for determining and evaluating system performance, efficiency, reliability, and cost. It explores modern computer-aided design of PM motors, including the finite element approach, and explains how to select PM motors to meet the specific requirements of electrical drives. The numerous examples, models, and diagrams provided in each chapter facilitate a lucid understanding of motor operations and characteristics. This 3rd edition of a bestselling reference has been thoroughly revised to include: Chapters on high speed motors and micromotors Advances in permanent magnet motor technology Additional numerical examples and illustrations An increased effort to bridge the gap between theory and industrial applications Modified research results The growing global trend toward energy conservation makes it quite possible that the era of the PM brushless motor drive is just around the corner. This reference book will give engineers, researchers, and graduate-level students the comprehensive understanding required to develop the breakthroughs that will push this exciting technology to the forefront.
Download or read book Permanent Magnet Synchronous and Brushless DC Motors written by and published by . This book was released on 2009 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design of Brushless Permanent magnet Motors written by J. R. Hendershot and published by Clarendon Press. This book was released on 1994 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Brushless permanent-magnet motors provide simple, low maintenance, and easily controlled mechanical power. Written by two leading experts on the subject, this book offers the most comprehensive guide to the design and performance of brushless permanent-magnetic motors ever written. Topics range from electrical and magnetic design to materials and control. Throughout, the authors stress both practical and theoretical aspects of the subject, and relate the material to modern software-based techniques for design and analysis. As new magnetic materials and digital power control techniques continue to widen the scope of the applicability of such motors, the need for an authoritative overview of the subject becomes ever more urgent. Design of Brushless Permanent-Magnet Motors fits the bill and will be read by students and researchers in electric and electronic engineering.
Download or read book Dynamics and Control of Electrical Drives written by Wach Piotr and published by Springer Science & Business Media. This book was released on 2011-04-28 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamics is a science concerned with movement and changes. In the most general approach it relates to life processes as well as behavior in nature in rest. It governs small particles, technical objects, conversion of matter and materials but also concerns people, groups of people in their individual and, in particular, social dimension. In dynamics we always have to do with causes or stimuli for motion, the rules of reaction or behavior and its result in the form of trajectory of changes. This book is devoted to dynamics of a wide class of specific but very important objects such as electromechanical systems. This is a very rigorous discipline and has a long tradition, as its theoretical bases were formulated in the first half of the XIX century by d’ Alembert, Lagrange, Hamilton, Maxwell and other prominent scientists, but their crucial results were based on previous pioneering research of others such as Copernicus, Galileo, Newton... This book in its theoretical foundations is based on the principle of least action which governs classical as well as relativistic mechanics and electromagnetism and leads to Lagrange’s equations which are applied in the book as universal method to construct equations of motion of electromechanical systems. It gives common and coherent grounds to formulate mathematical models for all lumped parameters’ electromechanical systems, which are vital in our contemporary industry and civilized everyday life. From these remarks it seems that the book is general and theoretical but in fact it is a very practical one concerning modern electrical drives in a broad sense, including electromechanical energy conversion, induction motor drives, brushless DC drives with a permanent magnet excitation and switched reluctance machines (SRM). And of course their control, which means shaping of their trajectories of motion using modern tools, their designed autonomy in keeping a track according to our programmed expectations. The problems presented in the book are widely illustrated by characteristics, trajectories, dynamic courses all computed by use of developed simulation models throughout the book. There are some classical subjects and the history of the discipline is discussed but finally all modern tools and means are presented and applied. More detailed descriptions follow in abstracts for the particular chapters. The author hopes kind readers will enjoy and profit from reading this book.
Download or read book Axial Flux Permanent Magnet Brushless Machines written by Jacek F. Gieras and published by Springer Science & Business Media. This book was released on 2008-03-26 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: Axial Flux Permanent Magnet (AFPM) brushless machines are modern electrical machines with a lot of advantages over their conventional counterparts. This timeless and revised second edition deals with the analysis, construction, design, control and applications of AFPM machines. The authors present their own research results, as well as significant research contributions made by others.
Download or read book Permanent Magnet Motor Technology written by Jacek F. Gieras and published by CRC Press. This book was released on 2002-01-22 with total page 1312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Co-authored by a world-renowned expert in the field, Permanent Magnet Motor Technology: Design and Applications, Second Edition demonstrates the construction of PM motor drives and supplies ready-to-implement solutions for common roadblocks. The author presents fundamental equations and calculations to determine and evaluate system performance, efficiency, and reliability; explores modern computer-aided design of PM motors, including the finite element approach; and covers how to select PM motors to meet the specific requirements of electrical drives. The numerous examples, models, and diagrams provided in each chapter give the reader a clear understanding of motor operations and characteristics.
Download or read book Design of Brushless Permanent magnet Motors written by J. R. Hendershot and published by Magna Physics Pub. This book was released on 1994-01-01 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Permanent Magnet Synchronous Machines written by Sandra Eriksson and published by MDPI. This book was released on 2019-08-20 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Interest in permanent magnet synchronous machines (PMSMs) is continuously increasing worldwide, especially with the increased use of renewable energy and the electrification of transports. This book contains the successful submissions of fifteen papers to a Special Issue of Energies on the subject area of “Permanent Magnet Synchronous Machines”. The focus is on permanent magnet synchronous machines and the electrical systems they are connected to. The presented work represents a wide range of areas. Studies of control systems, both for permanent magnet synchronous machines and for brushless DC motors, are presented and experimentally verified. Design studies of generators for wind power, wave power and hydro power are presented. Finite element method simulations and analytical design methods are used. The presented studies represent several of the different research fields on permanent magnet machines and electric drives.