Download or read book Performance of Compact Heat Exchangers as Affected by Various Geometries written by Tahereh Najipoor and published by . This book was released on 1985 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Elsevier. This book was released on 2001-05-08 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the ideas and industrial concepts in compact heat exchanger technology that have been developed in the last 10 years or so. Historically, the development and application of compact heat exchangers and their surfaces has taken place in a piecemeal fashion in a number of rather unrelated areas, principally those of the automotive and prime mover, aerospace, cryogenic and refrigeration sectors. Much detailed technology, familiar in one sector, progressed only slowly over the boundary into another sector. This compartmentalisation was a feature both of the user industries themselves, and also of the supplier, or manufacturing industries. These barriers are now breaking down, with valuable cross-fertilisation taking place. One of the industrial sectors that is waking up to the challenges of compact heat exchangers is that broadly defined as the process sector. If there is a bias in the book, it is towards this sector. Here, in many cases, the technical challenges are severe, since high pressures and temperatures are often involved, and working fluids can be corrosive, reactive or toxic. The opportunities, however, are correspondingly high, since compacts can offer a combination of lower capital or installed cost, lower temperature differences (and hence running costs), and lower inventory. In some cases they give the opportunity for a radical re-think of the process design, by the introduction of process intensification (PI) concepts such as combining process elements in one unit. An example of this is reaction and heat exchange, which offers, among other advantages, significantly lower by-product production.To stimulate future research, the author includes coverage of hitherto neglected approaches, such as that of the Second Law (of Thermodynamics), pioneered by Bejan and co- workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of exergy, according to interpretation.
Download or read book Compact Heat Exchangers written by Alexander Louis London and published by CRC Press. This book was released on 1990 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat exchangers are a crucial part of aerospace, marine, cryogenic and refrigeration technology. These essays cover such topics as complicated flow arrangements, complex extended surfaces, two-phase flow and irreversibility in heat exchangers, and single-phase heat transfer.
Download or read book Compact Heat Exchangers written by C. Ranganayakulu and published by John Wiley & Sons. This book was released on 2018-04-30 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive source of generalized design data for most widely used fin surfaces in CHEs Compact Heat Exchanger Analysis, Design and Optimization: FEM and CFD Approach brings new concepts of design data generation numerically (which is more cost effective than generic design data) and can be used by design and practicing engineers more effectively. The numerical methods/techniques are introduced for estimation of performance deteriorations like flow non-uniformity, temperature non-uniformity, and longitudinal heat conduction effects using FEM in CHE unit level and Colburn j factors and Fanning friction f factors data generation method for various types of CHE fins using CFD. In addition, worked examples for single and two-phase flow CHEs are provided and the complete qualification tests are given for CHEs use in aerospace applications. Chapters cover: Basic Heat Transfer; Compact Heat Exchangers; Fundamentals of Finite Element and Finite Volume Methods; Finite Element Analysis of Compact Heat Exchangers; Generation of Design Data by CFD Analysis; Thermal and Mechanical Design of Compact Heat Exchanger; and Manufacturing and Qualification Testing of Compact Heat Exchanger. Provides complete information about basic design of Compact Heat Exchangers Design and data generation is based on numerical techniques such as FEM and CFD methods rather than experimental or analytical ones Intricate design aspects included, covering complete cycle of design, manufacturing, and qualification of a Compact Heat Exchanger Appendices on basic essential fluid properties, metal characteristics, and derivation of Fourier series mathematical equation Compact Heat Exchanger Analysis, Design and Optimization: FEM and CFD Approach is ideal for senior undergraduate and graduate students studying equipment design and heat exchanger design.
Download or read book Compact Heat Exchangers written by J.E. Hesselgreaves and published by Butterworth-Heinemann. This book was released on 2016-09-26 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Heat Exchangers: Selection, Design, and Operation, Second Edition, is fully revised to present the most recent and fundamental ideas and industrial concepts in compact heat exchanger technology. This complete reference compiles all aspects of theory, design rules, operational issues, and the most recent developments and technological advancements in compact heat exchangers. New to this edition is the inclusion of micro, sintered, and porous passage description and data, electronic cooling, and an introduction to convective heat transfer fundamentals. New revised content provides up-to-date coverage of industrially available exchangers, recent fouling theories, and reactor types, with summaries of off-design performance and system effects and installations issues in, for example, automobiles and aircraft. Hesselgreaves covers previously neglected approaches, such as the Second Law (of Thermodynamics), pioneered by Bejan and co-workers. The justification for this is that there is increasing interest in life-cycle and sustainable approaches to industrial activity as a whole, often involving exergy (Second Law) analysis. Heat exchangers, being fundamental components of energy and process systems, are both savers and spenders of energy, according to interpretation. - Contains revised content, covering industrially available exchangers, recent fouling theories, and reactor types - Includes useful comparisons throughout with conventional heat exchangers to emphasize the benefits of CPHE applications - Provides a thorough system view from commissioning, operation, maintenance, and design approaches to reduce fouling and fouling factors - Compiles all aspects of theory, design rules, operational issues, and the most recent developments and technological advancements in compact heat exchangers
Download or read book Fundamentals of Heat Exchanger Design written by Dusan P. Sekulic and published by John Wiley & Sons. This book was released on 2023-12-07 with total page 772 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Heat Exchanger Design, Second Edition builds upon the widely-used First Edition, a text often considered to be the most prominent single-volume heat exchanger text on the market. The new and improved Second Edition serves as an equally comprehensive resource, updated to suit the latest technologies and design methods being used in the Heat Exchanger field. Written by First-Edition author Dusan P. Sekulic, this text addresses the latest developments in the industry, including a brand-new chapter on the manufacturing of compact heat exchangers. After opening with a basic introduction to heat exchanger types and design methods, the book goes on to cover more specialized topics such as such as the design of recuperators and regenerators, pressure drop analysis, geometric properties, flow friction, fouling and corrosion, and more. With many significant revisions throughout, this new edition offers more streamlined content while maintaining the consistent, detailed coverage of the fundamentals of the topic that readers appreciated in the First Edition. These unique features position the Second Edition of Fundamentals of Heat Exchanger Design as the ideal text for both engineering professionals and advanced students alike.
Download or read book Comprehensive Study of Compact Heat Exchangers with Offset Strip Fin written by Latife Berrin Erbay and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This chapter is aimed to address the performance of compact heat exchangers with offset strip fin, which have been studied by the researchers in detail for decades. The history and basic features of offset strip fins (OSF) are described first to introduce the fin geometry. Then, the effect of the fin geometry on the performance of the offset strip fin is given from experimental and numerical aspects, respectively. Flow streams evolution under varying offset strip geometries is summarized in order to demonstrate the physical impact on the flow. The thermohydraulic features of the flow in the offset strip fin are investigated by considering the Colburn j-factor and friction (f) factors in diverse flow regimes. Furthermore the criteria, flow area goodness factor j/f, the ratio j/f1/3 and thermohydraulic performance factor JF, derived from the mentioned dimensionless factors, are also used as a scale of the performance of the structure and reported in the chapter.
Download or read book Computation of Heat Transfer and Flow in Compact Heat exchanger Geometries written by Sompong Putivisutisak and published by . This book was released on 1999 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Plate Heat Exchangers written by Bengt Sundén and published by WIT Press. This book was released on 2007 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Plate-and-frame heat exchangers (PHEs) are used in many different processes at a broad range of temperatures and with a variety of substances. Research into PHEs has increased considerably in recent years and this is a compilation of knowledge on the subject. Containing invited contributions from prominent and active investigators in the area, it should enable graduate students, researchers, and research and development engineers in industry to achieve a better understanding of transport processes. Some guidelines for design and development are also included.
Download or read book Compact Heat Exchangers written by William Morrow Kays and published by . This book was released on 1958 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Process Intensification written by David Reay and published by Butterworth-Heinemann. This book was released on 2013-06-05 with total page 624 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Intensification: Engineering for Efficiency, Sustainability and Flexibility is the first book to provide a practical working guide to understanding process intensification (PI) and developing successful PI solutions and applications in chemical process, civil, environmental, energy, pharmaceutical, biological, and biochemical systems. Process intensification is a chemical and process design approach that leads to substantially smaller, cleaner, safer, and more energy efficient process technology. It improves process flexibility, product quality, speed to market and inherent safety, with a reduced environmental footprint. This book represents a valuable resource for engineers working with leading-edge process technologies, and those involved research and development of chemical, process, environmental, pharmaceutical, and bioscience systems. - No other reference covers both the technology and application of PI, addressing fundamentals, industry applications, and including a development and implementation guide - Covers hot and high growth topics, including emission prevention, sustainable design, and pinch analysis - World-class authors: Colin Ramshaw pioneered PI at ICI and is widely credited as the father of the technology
Download or read book Heat Exchange Engineering Compact heat exchangers techniques of size reduction written by E. A. Foumeny and published by Prentice Hall. This book was released on 1991 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second of a two-volume work designed to provide information on the design aspects of thermal systems and to review research and development on the improvement of design and performance. This book concentrates on shell and tube heat exchangers, particularly compact exchangers.
Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, SIld disseminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) * at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the activity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all con cerned if the printing and distribution of the volumes were handled by an interna and broader dissemination. tional publishing house to assure improved service Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Cor poration of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 30 (thesis year 1985) a total of 12,400 theses titles from 26 Canadian and 186 United States universities. We are sure that this broader base for these titles reported will greatly enhance the value of this important annual reference work.
Download or read book Advances in Thermal Design of Heat Exchangers written by Eric M. Smith and published by . This book was released on 2005 with total page 552 pages. Available in PDF, EPUB and Kindle. Book excerpt: The primary objective in any engineering design process has to be the elimination of uncertainties. In thermal design of heat exchangers there are presently many stages in which assumptions in mathematical solution of the design problem are being made. Accumulation of these assumptions may introduce variations in design. The designer needs to understand where these inaccuracies may arise, and strive to eliminate as many sources of error as possible by choosing design configurations that avoid such problems at source. In this exciting text, the author adopts a numerical approach to the thermal design of heat exchangers, extending the theory of performance evaluation to the point where computer software may be written. The first few chapters are intended to provide a development from undergraduate studies regarding the fundamentals of heat exchanger theory and the concepts of direct sizing. Later chapters on transient response of heat exchangers and on the related single-blow method of obtaining experimental results should also interest the practicing engineer. Theory is explained simply, with the intention that readers can develop their own approach to the solution of particular problems. This book is an indispensable reference text for higher level (post-graduate) students and practicing engineers, researchers and academics in the field of heat exchangers. Includes a whole new chapter on exergy and pressure loss Provides in the first few chapters a development from undergraduate studies regarding the fundamentals of heat exchanger theory, and continues in later chapters to discuss issues such as the transient response of heat exchangers and the related single-blow method of obtaining experimental results that are also of interest to the practicing engineer. Adopts a numerical approach to the thermal design of heat exchangers, extending the theory of performance evaluation to the point where computer software may be written Contributes to the development of the direct ‘sizing’ approach in thermal design of the exchanger surface Explains theory simply, with the objective that the reader can develop their own approach to the solution of particular problems
Download or read book Heat Exchangers written by Kuppan Thulukkanam and published by CRC Press. This book was released on 2024-02-29 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Exchangers: Classification, Selection, and Thermal Design, Third Edition discusses heat exchangers and their various applications, such as refrigeration, air conditioning, automobiles, gas turbines, process industries, refineries, and thermal power plants. With a focus on thermal design methods, including rating and sizing, the book covers thermohydraulic fundamentals and thermal effectiveness charts for various flow configurations and shell and tube heat exchangers. It provides construction details, geometrical features and correlations, and thermo-hydraulic details for tube-fin, plate fin, air-cooled, shell and tube, microchannel, and plate heat exchangers and thermal design methods like rating and sizing. The book explores additive manufacturing of heat exchangers, printed circuit heat exchangers, and heat transfer augmentation methods. The book also describes recuperators and regenerators of gas turbine cycles, waste heat recovery devices, and phase change phenomena including boiling, condensation and steam generation. The book serves as a useful reference for researchers, graduate students, and engineers in the field of heat exchanger design, including heat exchanger manufacturers.
Download or read book Heat Exchanger Design Handbook Vol 1 Heat exchanger theory Vol 2 Fluid mechanics and heat transfer Vol 3 Thermal and hydraulic design of heat exchangers Vol 4 Mechanical design of heat exchangers Vol 5 Physical properties written by Ernst U. Schlünder and published by . This book was released on 1983 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Neural Computing for Advanced Applications written by Haijun Zhang and published by Springer Nature. This book was released on 2020-08-12 with total page 542 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents refereed proceedings of the First International Conference on Neural Computing for Advanced Applications, NCAA 2020, held in July, 2020. Due to the COVID-19 pandemic the conference was held online. The 36 full papers and 7 short papers were thorougly reviewed and selected from a total of 113 qualified submissions. The papers present resent research on such topics as neural network theory, and cognitive sciences, machine learning, data mining, data security & privacy protection, and data-driven applications, computational intelligence, nature-inspired optimizers, and their engineering applications, cloud/edge/fog computing, the Internet of Things/Vehicles (IoT/IoV), and their system optimization, control systems, network synchronization, system integration, and industrial artificial intelligence, fuzzy logic, neuro-fuzzy systems, decision making, and their applications in management sciences, computer vision, image processing, and their industrial applications, and natural language processing, machine translation, knowledge graphs, and their applications.
