Download or read book Flight Testing of Fixed Wing Aircraft written by Ralph D. Kimberlin and published by AIAA. This book was released on 2003 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation The measurement of performance during an airplane's flight, testing is one of the more important tasks to be accomplished during its development as it impacts on both the airplane's safety and its marketability. This book discusses performance for both propeller-driven and jet aircraft.
Download or read book Understanding Performance Flight Testing Kitplanes and Production Aircraft written by Hubert C. Smith and published by McGraw Hill Professional. This book was released on 2001-09-18 with total page 241 pages. Available in PDF, EPUB and Kindle. Book excerpt: *Covers lightplane performance flight testing methods, measures, and computer applications *Includes CD-ROM with sample spreadsheets containing equations to help readers perform their own flight tests *Describes GPS (Global Positioning System) test method for airspeed calibration and rapid-wind camera method for takeoff performance
Download or read book Flight Test Techniques Used to Evaluate Performance Benefits During Formation Flight written by Ronald J. Ray and published by . This book was released on 2002 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Flight Testing written by James W. Gregory and published by John Wiley & Sons. This book was released on 2021-05-17 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Flight Testing Introduction to Flight Testing Provides an introduction to the basic flight testing methods employed on general aviation aircraft and unmanned aerial vehicles Introduction to Flight Testing provides a concise introduction to the basic flight testing methods employed on general aviation aircraft and unmanned aerial vehicles for courses in aeronautical engineering. There is particular emphasis on the use of modern on-board instruments and inexpensive, off-the-shelf portable devices that make flight testing accessible to nearly any student. This text presents a clear articulation of standard methods for measuring aircraft performance characteristics. Topics covered include aircraft and instruments, digital data acquisition techniques, flight test planning, the standard atmosphere, uncertainty analysis, level flight performance, airspeed calibration, stall, climb and glide, take-off and landing, level turn, static and dynamic longitudinal stability, lateral-directional stability, and flight testing of unmanned aircraft systems. Unique to this book is a detailed discussion of digital data acquisition (DAQ) techniques, which are an integral part of modern flight test programs. This treatment includes discussion of the analog-to-digital conversion, sample rate, aliasing, and filtering. These critical details provide the flight test engineer with the insight needed to understand the capabilities and limitations of digital DAQ. Key features: Provides an introduction to the basic flight testing methods and instrumentation employed on general aviation aircraft and unmanned aerial vehicles. Includes examples of flight testing on general aviation aircraft such as Cirrus, Diamond, and Cessna aircraft, along with unmanned aircraft vehicles. Suitable for courses on Aircraft Flight Test Engineering. Introduction to Flight Testing provides resources and guidance for practitioners in the rapidly-developing field of drone performance flight test and the general aviation flight test community.
Download or read book Introduction to Aircraft Flight Mechanics written by Thomas R. Yechout and published by AIAA. This book was released on 2003 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on a 15-year successful approach to teaching aircraft flight mechanics at the US Air Force Academy, this text explains the concepts and derivations of equations for aircraft flight mechanics. It covers aircraft performance, static stability, aircraft dynamics stability and feedback control.
Download or read book Test Techniques for Flight Control Systems of Large Transport Aircraft written by Yakui Gao and published by Academic Press. This book was released on 2021-02-16 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: Test Techniques for Flight Control Systems of Large Transport Aircraft offers theory and practice of flight control system tests. It is a systematic and practical guide, providing insights to engineers in flight control, particularly those working on system integration and test validation. Ten chapters cover an introduction to flight control system tests, equipment tests and validation, software tests and validation, flight control law and flying qualities evaluation, tests of flight control subsystems, integration and validation based on the iron bird, ground-based test, flight-tests, airworthiness tests and validation, and finally, the current status and prospects for flight control tests and evaluation. - Presents flight control system integration tests and validation for large transport aircraft - Includes the most advanced methods and technologies available - Details the latest research and its applications - Offers theoretical and practical guidance that engineers can use - Considers the state-of-the-art and looks to the future of flight control system tests
Download or read book An Ablation Technique for Enhancing Reentry Antenna Performance Flight Test Results written by Dallas T. Hayes and published by . This book was released on 1974 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt: To develop alternative solutions to Air Force problems relating to signal transmission in the presence of ionization, AFCRL undertook an extensive investigation of techniques for modifying reentry plasmas. The program included laboratory tests and a series of reentry flight experiments. This report describes the flight test of one successful technique, Teflon ablation, a passive approach that requires no internal support systems. A reentry vehicle fitted with a Teflon-coated nosecap was instrumented to measure antenna impedance mismatch, interantenna coupling, signal attenuation, and charged-particle density. The probe data showed that the local boundary-layer electron density decreased by as much as a factor of 200. The Teflon coating effected a 25-dB decrease in S-band signal attenuation. High-power antenna breakdown was modified by the presence of the ablation products. Details of the vehicle design, flight dynamics, and ablation, are presented, and the results of the Teflon-ablation technique are contrasted with those of a successful liquid-injection technique that was tested on a previous flight.
Download or read book Performance of Light Aircraft written by John T. Lowry and published by AIAA. This book was released on 1999 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pilots, aviation students, kitplane builders, aircraft fleet operators and aeronautical engineers can all determine how their propeller-driven airplanes will perform, under any conditions, by using the step-by-step bootstrap approach introduced in this book. A few routine flying manoeuvres (climbs, glides, a level speed run) will give the necessary nine numbers. High-school level calculations then give performance numbers with much greater detail and accuracy than many other methods - for the reader's individual aircraft.
Download or read book On Subscale Flight Testing written by Alejandro Sobron and published by Linköping University Electronic Press. This book was released on 2018-11-05 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Downscaled physical models, also referred to as subscale models, have played an essential role in the investigation of the complex physics of flight until the recent disruption of numerical simulation. Despite the fact that improvements in computational methods are slowly pushing experimental techniques towards a secondary role as verification or calibration tools, real-world testing of physical prototypes still provides an unmatched confidence. Physical models are very effective at revealing issues that are sometimes not correctly identified in the virtual domain, and hence can be a valuable complement to other design tools. But traditional wind-tunnel testing cannot always meet all of the requirements of modern aeronautical research and development. It is nowadays too expensive to use these scarce facilities to explore different design iterations during the initial stages of aircraft development, or to experiment with new and immature technologies. Testing of free-flight subscale models, referred to as Subscale Flight Testing (SFT), could offer an affordable and low-risk alternative for complementing conventional techniques with both qualitative and quantitative information. The miniaturisation of mechatronic systems, the advances in rapid-prototyping techniques and power storage, as well as new manufacturing methods, currently enable the development of sophisticated test objects at scales that were impractical some decades ago. Moreover, the recent boom in the commercial drone industry has driven a quick development of specialised electronics and sensors, which offer nowadays surprising capabilities at competitive prices. These recent technological disruptions have significantly altered the cost-benefit function of SFT and it is necessary to re-evaluate its potential in the contemporary aircraft development context. This thesis aims to increase the comprehension and knowledge of the SFT method in order to define a practical framework for its use in aircraft design; focusing on low-cost, short-time solutions that don’t require more than a small organization and few resources. This objective is approached from a theoretical point of view by means of an analysis of the physical and practical limitations of the scaling laws; and from an empirical point of view by means of field experiments aimed at identifying practical needs for equipment, methods, and tools. A low-cost data acquisition system is developed and tested; a novel method for semi-automated flight testing in small airspaces is proposed; a set of tools for analysis and visualisation of flight data is presented; and it is also demonstrated that it is possible to explore and demonstrate new technology using SFT with a very limited amount of economic and human resources. All these, together with a theoretical review and contextualisation, contribute to increasing the comprehension and knowledge of the SFT method in general, and its potential applications in aircraft conceptual design in particular.
Download or read book Flight Testing Homebuilt Aircraft written by Vaughan Askue and published by Iowa State Press. This book was released on 1992-01-01 with total page 177 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now that it's built, how well will it fly? Flight Testing Homebuilt Aircraft tells how to test such aircraft systematically and safely, with professional results. It defines flight testing as a four-phase step-by-step process of learning the limitations of an aircraft; defining and eliminating aircraft problems; and determining aircraft capability and optimum flying techniques - all with minimum risk to pilot and machine. With straightforward description and more than 80 illustrations, the book teaches builders to use this process to design thorough, safe flight tests customized to specific aircraft in specific testing environments.
Download or read book Flight Test System Identification written by Roger Larsson and published by Linköping University Electronic Press. This book was released on 2019-05-15 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the demand for more advanced fighter aircraft, relying on unstable flight mechanical characteristics to gain flight performance, more focus has been put on model-based system engineering to help with the design work. The flight control system design is one important part that relies on this modeling. Therefore, it has become more important to develop flight mechanical models that are highly accurate in the whole flight envelope. For today’s modern fighter aircraft, the basic flight mechanical characteristics change between linear and nonlinear as well as stable and unstable as an effect of the desired capability of advanced maneuvering at subsonic, transonic and supersonic speeds. This thesis combines the subject of system identification, which is the art of building mathematical models of dynamical systems based on measurements, with aeronautical engineering in order to find methods for identifying flight mechanical characteristics. Here, some challenging aeronautical identification problems, estimating model parameters from flight-testing, are treated. Two aspects are considered. The first is online identification during flight-testing with the intent to aid the engineers in the analysis process when looking at the flight mechanical characteristics. This will also ensure that enough information is available in the resulting test data for post-flight analysis. Here, a frequency domain method is used. An existing method has been developed further by including an Instrumental Variable approach to take care of noisy data including atmospheric turbulence and by a sensor-fusion step to handle varying excitation during an experiment. The method treats linear systems that can be both stable and unstable working under feedback control. An experiment has been performed on a radio-controlled demonstrator aircraft. For this, multisine input signals have been designed and the results show that it is possible to perform more time-efficient flight-testing compared with standard input signals. The other aspect is post-flight identification of nonlinear characteristics. Here the properties of a parameterized observer approach, using a prediction-error method, are investigated. This approach is compared with four other methods for some test cases. It is shown that this parameterized observer approach is the most robust one with respect to noise disturbances and initial offsets. Another attractive property is that no user parameters have to be tuned by the engineers in order to get the best performance. All methods in this thesis have been validated on simulated data where the system is known, and have also been tested on real flight test data. Both of the investigated approaches show promising results.
Download or read book Introduction to Aerospace Engineering with a Flight Test Perspective written by Stephen Corda and published by John Wiley & Sons. This book was released on 2017-03-20 with total page 931 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive textbook which introduces the fundamentals of aerospace engineering with a flight test perspective Introduction to Aerospace Engineering with a Flight Test Perspective is an introductory level text in aerospace engineering with a unique flight test perspective. Flight test, where dreams of aircraft and space vehicles actually take to the sky, is the bottom line in the application of aerospace engineering theories and principles. Designing and flying the real machines are often the reasons that these theories and principles were developed. This book provides a solid foundation in many of the fundamentals of aerospace engineering, while illuminating many aspects of real-world flight. Fundamental aerospace engineering subjects that are covered include aerodynamics, propulsion, performance, and stability and control. Key features: Covers aerodynamics, propulsion, performance, and stability and control. Includes self-contained sections on ground and flight test techniques. Includes worked example problems and homework problems. Suitable for introductory courses on Aerospace Engineering. Excellent resource for courses on flight testing. Introduction to Aerospace Engineering with a Flight Test Perspective is essential reading for undergraduate and graduate students in aerospace engineering, as well as practitioners in industry. It is an exciting and illuminating read for the aviation enthusiast seeking deeper understanding of flying machines and flight test.
Download or read book The Anatomy of the Airplane written by Darrol Stinton and published by AIAA (American Institute of Aeronautics & Astronautics). This book was released on 1998 with total page 488 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work bridges the gap between aeronautical principles and the practical world of aeroplanes by explaining aircraft design in terms of aerodynamics, propulsion, land and water operation, and structural arrangement. The book has been updated to include the main advances in aircraft design, propulsion and manufacture since it was first published in 1996.
Download or read book Air Force and Space Digest written by and published by . This book was released on 1963 with total page 1460 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1995 with total page 440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Aerospace Engineering with a Flight Test Perspective written by Stephen Corda and published by John Wiley & Sons. This book was released on 2017-01-03 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive textbook which introduces the fundamentals of aerospace engineering with a flight test perspective Introduction to Aerospace Engineering with a Flight Test Perspective is an introductory level text in aerospace engineering with a unique flight test perspective. Flight test, where dreams of aircraft and space vehicles actually take to the sky, is the bottom line in the application of aerospace engineering theories and principles. Designing and flying the real machines are often the reasons that these theories and principles were developed. This book provides a solid foundation in many of the fundamentals of aerospace engineering, while illuminating many aspects of real-world flight. Fundamental aerospace engineering subjects that are covered include aerodynamics, propulsion, performance, and stability and control. Key features: Covers aerodynamics, propulsion, performance, and stability and control. Includes self-contained sections on ground and flight test techniques. Includes worked example problems and homework problems. Suitable for introductory courses on Aerospace Engineering. Excellent resource for courses on flight testing. Introduction to Aerospace Engineering with a Flight Test Perspective is essential reading for undergraduate and graduate students in aerospace engineering, as well as practitioners in industry. It is an exciting and illuminating read for the aviation enthusiast seeking deeper understanding of flying machines and flight test.
Download or read book Aviation Safety and Pilot Control written by National Research Council and published by National Academies Press. This book was released on 1997-03-28 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Adverse aircraft-pilot coupling (APC) events include a broad set of undesirable and sometimes hazardous phenomena that originate in anomalous interactions between pilots and aircraft. As civil and military aircraft technologies advance, interactions between pilots and aircraft are becoming more complex. Recent accidents and other incidents have been attributed to adverse APC in military aircraft. In addition, APC has been implicated in some civilian incidents. This book evaluates the current state of knowledge about adverse APC and processes that may be used to eliminate it from military and commercial aircraft. It was written for technical, government, and administrative decisionmakers and their technical and administrative support staffs; key technical managers in the aircraft manufacturing and operational industries; stability and control engineers; aircraft flight control system designers; research specialists in flight control, flying qualities, human factors; and technically knowledgeable lay readers.
