Download or read book The IEEE International Symposium on Personal Indoor and Mobile Radio Communications written by IEEE International Symposium on Personal, Indoor, and Mobile Radio Communications and published by . This book was released on 1995 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Proceedings written by and published by . This book was released on 2003 with total page 1232 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Conference Proceedings written by and published by . This book was released on 2004 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book OFDM Systems for Wireless Communications written by Adarsh B. Narasimhamurthy and published by Morgan & Claypool Publishers. This book was released on 2010 with total page 79 pages. Available in PDF, EPUB and Kindle. Book excerpt: Orthogonal Frequency Division Multiplexing (OFDM) systems are widely used in the standards for digital audio/video broadcasting, WiFi and WiMax. Being a frequency-domain approach to communications, OFDM has important advantages in dealing with the frequency-selective nature of high data rate wireless communication channels. As the needs for operating with higher data rates become more pressing, OFDM systems have emerged as an effective physical-layer solution. This short monograph is intended as a tutorial which highlights the deleterious aspects of the wireless channel and presents why OFDM is a good choice as a modulation that can transmit at high data rates. The system-level approach we shall pursue will also point out the disadvantages of OFDM systems especially in the context of peak to average ratio, and carrier frequency synchronization. Finally, simulation of OFDM systems will be given due prominence. Simple MATLAB programs are provided for bit error rate simulation using a discrete-time OFDM representation. Software is also provided to simulate the effects of inter-block-interference, inter-carrier-interference and signal clipping on the error rate performance. Different components of the OFDM system are described, and detailed implementation notes are provided for the programs. The program can be downloaded here. Table of Contents: Introduction / Modeling Wireless Channels / Baseband OFDM System / Carrier Frequency Offset / Peak to Average Power Ratio / Simulation of the Performance of OFDM Systems / Conclusions

Download or read book Broadband Wireless Access and Local Networks written by Byeong Gi Lee and published by Artech House. This book was released on 2008 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative resource offers you complete, state-of-the-art coverage of wireless broadband access networks. The book provides you with a thorough introduction to wireless access and local networks, covers broadband mobile wireless access systems, and details mobile and broadband wireless local area networks. This forward-looking reference focuses on cutting-edge mobile WiMax, WiFi, and WiBro technologies, including in-depth design and implementation guidance. Collecting the most recent experience and knowledge of design and field engineers from leading organizations like Samsung Electronics, Korea Telecom (KT) Corporation and Philips Electronics, the book introduces the network technologies adopted by Mobile WiMAX for the implementation of IP-based broadband mobile wireless access. Moreover, it covers the Wi-Fi technologies that have steadily evolved over the past decade, establishing a firm foundation for IP-based wireless local network access.

Download or read book Fundamentals of Wireless Communication written by David Tse and published by Cambridge University Press. This book was released on 2005-05-26 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook takes a unified view of the fundamentals of wireless communication and explains cutting-edge concepts in a simple and intuitive way. An abundant supply of exercises make it ideal for graduate courses in electrical and computer engineering and it will also be of great interest to practising engineers.

Download or read book MIMO OFDM Wireless Communications with MATLAB written by Yong Soo Cho and published by John Wiley & Sons. This book was released on 2010-08-20 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: MIMO-OFDM is a key technology for next-generation cellular communications (3GPP-LTE, Mobile WiMAX, IMT-Advanced) as well as wireless LAN (IEEE 802.11a, IEEE 802.11n), wireless PAN (MB-OFDM), and broadcasting (DAB, DVB, DMB). In MIMO-OFDM Wireless Communications with MATLAB®, the authors provide a comprehensive introduction to the theory and practice of wireless channel modeling, OFDM, and MIMO, using MATLAB® programs to simulate the various techniques on MIMO-OFDM systems. One of the only books in the area dedicated to explaining simulation aspects Covers implementation to help cement the key concepts Uses materials that have been classroom-tested in numerous universities Provides the analytic solutions and practical examples with downloadable MATLAB® codes Simulation examples based on actual industry and research projects Presentation slides with key equations and figures for instructor use MIMO-OFDM Wireless Communications with MATLAB® is a key text for graduate students in wireless communications. Professionals and technicians in wireless communication fields, graduate students in signal processing, as well as senior undergraduates majoring in wireless communications will find this book a practical introduction to the MIMO-OFDM techniques. Instructor materials and MATLAB® code examples available for download at www.wiley.com/go/chomimo

Download or read book OFDM Baseband Receiver Design for Wireless Communications written by Tzi-Dar Chiueh and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Orthogonal frequency-division multiplexing (OFDM) access schemes are becoming more prevalent among cellular and wireless broadband systems, accelerating the need for smaller, more energy efficient receiver solutions. Up to now the majority of OFDM texts have dealt with signal processing aspects. To address the current gap in OFDM integrated circuit (IC) instruction, Chiueh and Tsai have produced this timely text on baseband design. OFDM Baseband Receiver Design for Wireless Communications covers the gamut of OFDM technology, from theories and algorithms to architectures and circuits. Chiueh and Tsai give a concise yet comprehensive look at digital communications fundamentals before explaining modulation and signal processing algorithms in OFDM receivers. Moreover, the authors give detailed treatment of hardware issues -- from design methodology to physical IC implementation. Closes the gap between OFDM theory and implementation Enables the reader to transfer communication receiver concepts into hardware design wireless receivers with acceptable implementation loss achieve low-power designs Contains numerous figures to illustrate techniques Features concrete design examples of MC-CDMA systems and cognitive radio applications Presents theoretical discussions that focus on concepts rather than mathematical derivation Provides a much-needed single source of material from numerous papers Based on course materials for a class in digital communication IC design, this book is ideal for advanced undergraduate or post-graduate students from either VLSI design or signal processing backgrounds. New and experienced engineers in industry working on algorithms or hardware for wireless communications devices will also find this book to be a key reference.

Download or read book Baseband Receiver Design for Wireless MIMO OFDM Communications written by Tzi-Dar Chiueh and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second Edition of OFDM Baseband Receiver Design for Wirless Communications, this book expands on the earlier edition with enhanced coverage of MIMO techniques, additional baseband algorithms, and more IC design examples. The authors cover the full range of OFDM technology, from theories and algorithms to architectures and circuits. The book gives a concise yet comprehensive look at digital communication fundamentals before explaining signal processing algorithms in receivers. The authors give detailed treatment of hardware issues - from architecture to IC implementation. Links OFDM and MIMO theory with hardware implementation Enables the reader to transfer communication received concepts into hardware; design wireless receivers with acceptable implemntation loss; achieve low-power designs Covers the latest standards, such as DVB-T2, WiMax, LTE and LTE-A Includes more baseband algorithms, like soft-decoding algorithms such as BCJR and SOVA Expanded treatment of channel models, detection algorithms and MIMO techniques Features concrete design examples of WiMAX systems and cognitive radio apllications Companion website with lecture slides for instructors Based on materials developed for a course in digital communication IC design, this book is ideal for graduate students and researchers in VLSI design, wireless communications, and communications signal processing. Practicing engineers working on algorithms or hardware for wireless communications devices will also find this to be a key reference.

Download or read book Channel Coding Techniques for Wireless Communications written by K. Deergha Rao and published by Springer Nature. This book was released on 2019-11-22 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest channel coding techniques, MIMO systems, and 5G channel coding evolution. It provides a comprehensive overview of channel coding, covering modern techniques such as turbo codes, low-density parity-check (LDPC) codes, space–time coding, polar codes, LT codes, and Raptor codes as well as the traditional codes such as cyclic codes, BCH, RS codes, and convolutional codes. It also explores MIMO communications, which is an effective method for high-speed or high-reliability wireless communications. It also examines the evolution of 5G channel coding techniques. Each of the 13 chapters features numerous illustrative examples for easy understanding of the coding techniques, and MATLAB-based programs are integrated in the text to enhance readers’ grasp of the underlying theories. Further, PC-based MATLAB m-files for illustrative examples are included for students and researchers involved in advanced and current concepts of coding theory.

Download or read book OFDM for Optical Communications written by William Shieh and published by Academic Press. This book was released on 2009-09-18 with total page 457 pages. Available in PDF, EPUB and Kindle. Book excerpt: - The first book on optical OFDM by the leading pioneers in the field - The only book to cover error correction codes for optical OFDM - Gives applications of OFDM to free-space communications, optical access networks, and metro and log haul transports show optical OFDM can be implemented - Contains introductions to signal processing for optical engineers and optical communication fundamentals for wireless engineers This book gives a coherent and comprehensive introduction to the fundamentals of OFDM signal processing, with a distinctive focus on its broad range of applications. It evaluates the architecture, design and performance of a number of OFDM variations, discusses coded OFDM, and gives a detailed study of error correction codes for access networks, 100 Gb/s Ethernet and future optical networks. The emerging applications of optical OFDM, including single-mode fiber transmission, multimode fiber transmission, free space optical systems, and optical access networks are examined, with particular attention paid to passive optical networks, radio-over-fiber, WiMAX and UWB communications. Written by two of the leading contributors to the field, this book will be a unique reference for optical communications engineers and scientists. Students, technical managers and telecom executives seeking to understand this new technology for future-generation optical networks will find the book invaluable. William Shieh is an associate professor and reader in the electrical and electronic engineering department, The University of Melbourne, Australia. He received his M.S. degree in electrical engineering and Ph.D. degree in physics both from University of Southern California. Ivan Djordjevic is an Assistant Professor of Electrical and Computer Engineering at the University of Arizona, Tucson, where he directs the Optical Communications Systems Laboratory (OCSL). His current research interests include optical networks, error control coding, constrained coding, coded modulation, turbo equalization, OFDM applications, and quantum error correction. "This wonderful book is the first one to address the rapidly emerging optical OFDM field. Written by two leading researchers in the field, the book is structured to comprehensively cover any optical OFDM aspect one could possibly think of, from the most fundamental to the most specialized. The book adopts a coherent line of presentation, while striking a thoughtful balance between the various topics, gradually developing the optical-physics and communication-theoretic concepts required for deep comprehension of the topic, eventually treating the multiple optical OFDM methods, variations and applications. In my view this book will remain relevant for many years to come, and will be increasingly accessed by graduate students, accomplished researchers as well as telecommunication engineers and managers keen to attain a perspective on the emerging role of OFDM in the evolution of photonic networks." -- Prof. Moshe Nazarathy, EE Dept., Technion, Israel Institute of Technology - The first book on optical OFDM by the leading pioneers in the field - The only book to cover error correction codes for optical OFDM - Applications of OFDM to free-space communications, optical access networks, and metro and log haul transports show optical OFDM can be implemented - An introduction to signal processing for optical communications - An introduction to optical communication fundamentals for the wireless engineer

Download or read book LTE for 4G Mobile Broadband written by Farooq Khan and published by Cambridge University Press. This book was released on 2009-03-26 with total page 507 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understand the new technologies of the LTE standard and their impact on system performance improvements with this practical guide.

Download or read book OFDM and MC CDMA written by Lajos Hanzo and published by John Wiley & Sons. This book was released on 2007-01-11 with total page 430 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wireless communications has witnessed a tremendous growth during the past decade and further spectacular enabling technology advances are expected in an effort to render ubiquitous wireless connectivity a reality. Currently, a technical in-depth book on this subject is unavailable, which has a similar detailed exposure of OFDM, MIMO-OFDM and MC-CDMA. A further attraction of the joint treatment of these topics is that it allows the reader to view their design trade-offs in a comparative context. Divided into three main parts: Part I provides a detailed exposure of OFDM designed for employment in various applications Part II is another design alternative applicable in the context of OFDM systems where the channel quality fluctuations observed are averaged out with the aid of frequency-domain spreading codes, which leads to the concept of MC-CDMA Part III discusses how to employ multiple antennas at the base station for the sake of supporting multiple users in the uplink By providing an all-encompassing self-contained treatment this volume will appeal to a wide readership, as it is both an easy-reading textbook and a high-level research monograph.

Download or read book 802 11ac A Survival Guide written by Matthew S. Gast and published by "O'Reilly Media, Inc.". This book was released on 2013-07-23 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt: The next frontier for wireless LANs is 802.11ac, a standard that increases throughput beyond one gigabit per second. This concise guide provides in-depth information to help you plan for 802.11ac, with technical details on design, network operations, deployment, and monitoring. Author Matthew Gast—an industry expert who led the development of 802.11-2012 and security task groups at the Wi-Fi Alliance—explains how 802.11ac will not only increase the speed of your network, but its capacity as well. Whether you need to serve more clients with your current level of throughput, or serve your existing client load with higher throughput, 802.11ac is the solution. This book gets you started. Understand how the 802.11ac protocol works to improve the speed and capacity of a wireless LAN Explore how beamforming increases speed capacity by improving link margin, and lays the foundation for multi-user MIMO Learn how multi-user MIMO increases capacity by enabling an AP to send data to multiple clients simultaneously Plan when and how to upgrade your network to 802.11ac by evaluating client devices, applications, and network connections

Download or read book Multi Carrier and Spread Spectrum Systems written by K. Fazel and published by John Wiley & Sons. This book was released on 2004-02-06 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Frequency spectrum is a limited and valuable resource for wireless communications. A good example can be observed among network operators in Europe for the prices to pay for UMTS-frequency bands. Therefore, the first goal when designing future wireless communication systems (e.g. 4G - fourth generation) has to be the increase in spectral efficiency. The development in digital communications in the past years has enabled efficient modulation and coding techniques for robust and spectral efficient data, speech, audio and video transmission. These are the multi-carrier modulation (e.g. OFDM) and the spread spectrum technique (e.g. DS-CDMA), where OFDM was chosen for broadcast applications (DVB, DAB) as well as for broadband wireless indoor standards (ETSI HIPERLAN-II, IEEE-802.11) and the DS-CDMA was selected in mobile communications (IS-95, third generation mobile radio systems world wide, UMTS/IMT 2000). Since 1993 various combinations of multi-carrier (MC) modulation and the spread spectrum (SS) technique have been introduced and the field of MC-SS communications has become an independent and important research topic with increasing activities. New application fields have been proposed such as high rate cellular mobile, high rate wireless indoor and LMDS. It has been shown that MC-SS offers the high spectral efficiency, robustness and flexibility that is required for the next generation systems. Meanwhile, different alternative hybrid schemes such as OFDM/OFDMA, MC-TDMA, etc. have been deeply analysed and adopted in different international standards (ETSI-BRAN, IEEE-802 & MMAC). Multi-Carrier & Spread-Spectrum: Analysis of Hybrid Air Interfaces draws together all of the above mentioned hybrid schemes therefore providing a greatly needed resource for system engineers, telecommunication designers and researchers in order to enable them to develop, build and deploy several schemes based on MC-transmission for the next generation systems (which will be an integration of broadband multimedia services covering both 4G mobile and fixed wireless systems). * Offers a complete treatment of multi-carrier, spread-spectrum (SS) and time division multiplexing (TDM) techniques * Provides an in-depth insight into hybrid multiple access techniques based on multi-carrier (MC) transmission * Presents numerous hybrid multiple access and air interface architectures including OFDM/CDMA, MC-CDMA, MC-DS-CDMA and MT-CDMA * Covers new techniques such as space-time coding and software radio Telecommunications engineers, hardware & software system designers and researchers as well as students, lecturers and technicians will all find this an invaluable addition to their bookshelf.

Download or read book Software Defined Radio for Engineers written by Alexander M. Wyglinski and published by Artech House. This book was released on 2018-04-30 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the popular Artech House classic, Digital Communication Systems Engineering with Software-Defined Radio, this book provides a practical approach to quickly learning the software-defined radio (SDR) concepts needed for work in the field. This up-to-date volume guides readers on how to quickly prototype wireless designs using SDR for real-world testing and experimentation. This book explores advanced wireless communication techniques such as OFDM, LTE, WLA, and hardware targeting. Readers will gain an understanding of the core concepts behind wireless hardware, such as the radio frequency front-end, analog-to-digital and digital-to-analog converters, as well as various processing technologies. Moreover, this volume includes chapters on timing estimation, matched filtering, frame synchronization message decoding, and source coding. The orthogonal frequency division multiplexing is explained and details about HDL code generation and deployment are provided. The book concludes with coverage of the WLAN toolbox with OFDM beacon reception and the LTE toolbox with downlink reception. Multiple case studies are provided throughout the book. Both MATLAB and Simulink source code are included to assist readers with their projects in the field.

Download or read book Advanced Wireless Communications written by Savo G. Glisic and published by John Wiley & Sons. This book was released on 2007-06-13 with total page 890 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fully revised and updated version of the successful "AdvancedWireless Communications" Wireless communications continue to attract the attention ofboth research community and industry. Since the first edition waspublished significant research and industry activities have broughtthe fourth generation (4G) of wireless communications systemscloser to implementation and standardization. "Advanced Wireless Communications" continues to provide acomparative study of enabling technologies for 4G. This secondedition has been revised and updated and now includes additionalinformation on the components of common air interface, includingthe area of space time coding , multicarrier modulation especiallyOFDM, MIMO, cognitive radio and cooperative transmission. Ideal for students and engineers in research and development inthe field of wireless communications, the second edition ofAdvanced Wireless Communications also gives an understanding tocurrent approaches for engineers in telecomm operators, governmentand regulatory institutions. New features include: Brand new chapter covering linear precoding in MIMO channelsbased on convex optimization theory. Material based on game theory modelling encompassing problemsof adjacent cell interference, flexible spectra sharing andcooperation between the nodes in ad hoc networks. Presents and discusses the latest schemes for interferencesuppression in ultra wide band (UWB) cognitive systems. Discusses the cooperative transmission and more details onpositioning.