Download or read book Performance Evaluation and Optimization of Production Lines written by J. MacGregor Smith and published by . This book was released on 2000 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Production Systems Engineering written by Jingshan Li and published by Springer Science & Business Media. This book was released on 2008-11-13 with total page 674 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production Systems Engineering (PSE) is an emerging branch of Engineering intended to uncover fundamental principles of production systems and utilize them for analysis, continuous improvement, and design. This volume is the first ever textbook devoted exclusively to PSE. It is intended for senior undergraduate and first year graduate students interested in manufacturing. The development is first principle-based rather than recipe-based. The only prerequisite is elementary Probability Theory; however, all necessary probability facts are reviewed in an introductory chapter. Using a system-theoretic approach, this textbook provides analytical solutions for the following problems: mathematical modeling of production systems, performance analysis, constrained improvability, bottleneck identification and elimination, lean buffer design, product quality, customer demand satisfaction, transient behavior, and system-theoretic properties. Numerous case studies are presented. In addition, the so-called PSE Toolbox, which implements the algorithms developed, is described. The volume includes numerous case studies and problems for homework assignment.
Download or read book Performance Evaluation and Opimization of Production Lines written by James MacGregor Smith and published by . This book was released on 2000 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Design and Optimization of Production Lines written by Paolo Renna and published by MDPI. This book was released on 2021-01-27 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is dedicated to the latest findings on the design and optimization of production lines. The “Fourth Industrial Revolution” (alternatively known as “Industry 4.0”) supports innovative models for energy consumption and fault tolerance in automated lines, and this drives changes in the design and optimization models of production lines. The goal is to collect a series of works that can summarize the latest trends in the field of production line optimization models in order to improve the responsiveness of automated lines to failures, reduce energy consumption and peak electricity demand, and develop other methods to support robust and sustainable production lines.
Download or read book Performance Evaluation and Beyond written by Wade D. Cook and published by . This book was released on 2006 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Just in Time Systems written by Roger Rios and published by Springer Science & Business Media. This book was released on 2011-11-09 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whether different types of costs are to be reduced, benefits to be maximized or scarce resources to be managed, scheduling theory provides intelligent methods for practitioners and scientists. The just-in-time (JIT) production philosophy has enriched the classical scheduling theory with models that consider characteristics such as inventory costs, set-up times, lot sizing, or maintenance. This edited volume considers the specifics of just-in-time systems. It provides knowledge and insights on recent advances in scheduling theory where just-in-time aspects are considered. Contributions on models, theory, algorithms, and applications, that bring the theory up-to-date on the state-of-the-art of JIT systems are presented. Professionals, researchers and graduate students will find this book useful.
Download or read book Analysis and Modeling of Manufacturing Systems written by Stanley B. Gershwin and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analysis and Modeling of Manufacturing Systems is a set of papers on some of the newest research and applications of mathematical and computational techniques to manufacturing systems and supply chains. These papers deal with fundamental questions (how to predict factory performance: how to operate production systems) and explicitly treat the stochastic nature of failures, operation times, demand, and other important events. Analysis and Modeling of Manufacturing Systems will be of interest to readers with a strong background in operations research, including researchers and mathematically sophisticated practitioners.
Download or read book Stochastic Modeling of Manufacturing Systems written by George Liberopoulos and published by Springer Science & Business Media. This book was released on 2005-12-12 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing systems rarely perform exactly as expected and predicted. Unexpected events, such as order changes, equipment failures and product defects, affect the performance of the system and complicate decision-making. This volume is devoted to the development of analytical methods aiming at responding to variability in a way that limits its corrupting effects on system performance. The book includes fifteen novel chapters that mostly focus on the development and analysis of performance evaluation models of manufacturing systems using decomposition-based methods, Markovian and queuing analysis, simulation, and inventory control approaches. They are organized into four distinct sections to reflect their shared viewpoints: factory design, unreliable production lines, queuing network models, production planning and assembly.
Download or read book Handbook of Stochastic Models and Analysis of Manufacturing System Operations written by J. MacGregor Smith and published by Springer Science & Business Media. This book was released on 2013-05-17 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook surveys important stochastic problems and models in manufacturing system operations and their stochastic analysis. Using analytical models to design and control manufacturing systems and their operations entail critical stochastic performance analysis as well as integrated optimization models of these systems. Topics deal with the areas of facilities planning, transportation, and material handling systems, logistics and supply chain management, and integrated productivity and quality models covering: • Stochastic modeling and analysis of manufacturing systems • Design, analysis, and optimization of manufacturing systems • Facilities planning, transportation, and material handling systems analysis • Production planning, scheduling systems, management, and control • Analytical approaches to logistics and supply chain management • Integrated productivity and quality models, and their analysis • Literature surveys of issues relevant in manufacturing systems • Case studies of manufacturing system operations and analysis Today’s manufacturing system operations are becoming increasingly complex. Advanced knowledge of best practices for treating these problems is not always well known. The purpose of the book is to create a foundation for the development of stochastic models and their analysis in manufacturing system operations. Given the handbook nature of the volume, introducing basic principles, concepts, and algorithms for treating these problems and their solutions is the main intent of this handbook. Readers unfamiliar with these research areas will be able to find a research foundation for studying these problems and systems.
Download or read book Design and Analysis of Robust Kanban System in an Uncertain Environment written by Li, Zhe and published by KIT Scientific Publishing. This book was released on 2013-11-19 with total page 276 pages. Available in PDF, EPUB and Kindle. Book excerpt: Kanban is a representative control policy pursuing cost-efficient features for the material flow system. However, the Kanban mechanism increases the system vulnerability especially when the environment is uncertain. Therefore, we proposed a robust Kanban system model for the supply chain system based on the Kanban mechanism. The model can use robust approaches from strategic, tactical, and operational levels to deal with the risks in an uncertain environment.
Download or read book Maintenance strategies and reliability optimization written by and published by Emerald Group Publishing. This book was released on 2005 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stochastic Modeling of Manufacturing Systems written by George Liberopoulos and published by Springer Science & Business Media. This book was released on 2005-08-22 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing systems rarely perform exactly as expected and predicted. Unexpected events, such as order changes, equipment failures and product defects, affect the performance of the system and complicate decision-making. This volume is devoted to the development of analytical methods aiming at responding to variability in a way that limits its corrupting effects on system performance. The book includes fifteen novel chapters that mostly focus on the development and analysis of performance evaluation models of manufacturing systems using decomposition-based methods, Markovian and queuing analysis, simulation, and inventory control approaches. They are organized into four distinct sections to reflect their shared viewpoints: factory design, unreliable production lines, queuing network models, production planning and assembly.
Download or read book EMIS 2023 written by Luning Liu and published by European Alliance for Innovation. This book was released on 2023-06-15 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains the papers presented at the 2nd International Conference on Engineering Management and Information Science (EMIS 2023), held during December 24th-26th, 2023 (virtual event). With the theme of “bringing together global wisdom in scientific innovation to promote high-quality development”, the immediate purpose of this Conference was to gather experienced as well as young scientists who are interested in working actively on various aspects of engineering management and information science to drive development. The major topics covered in the Conference are: Project Management Information System, Logistics Information System, Intelligent Transportation Engineering, Passwords and Security Systems, Numerical Algorithms for Computers, Innovative Network Systems and Applications, Knowledge Acquisition and Management, etc... Here, scholars, experts, and researchers are welcomed to share their research progress and inspirations. It is a great opportunity to promote academic communication and collaboration worldwide.
Download or read book Modelling Simulation and Optimization written by Gregorio Romero and published by BoD – Books on Demand. This book was released on 2010-02-01 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-Aided Design and system analysis aim to find mathematical models that allow emulating the behaviour of components and facilities. The high competitiveness in industry, the little time available for product development and the high cost in terms of time and money of producing the initial prototypes means that the computer-aided design and analysis of products are taking on major importance. On the other hand, in most areas of engineering the components of a system are interconnected and belong to different domains of physics (mechanics, electrics, hydraulics, thermal...). When developing a complete multidisciplinary system, it needs to integrate a design procedure to ensure that it will be successfully achieved. Engineering systems require an analysis of their dynamic behaviour (evolution over time or path of their different variables). The purpose of modelling and simulating dynamic systems is to generate a set of algebraic and differential equations or a mathematical model. In order to perform rapid product optimisation iterations, the models must be formulated and evaluated in the most efficient way. Automated environments contribute to this. One of the pioneers of simulation technology in medicine defines simulation as a technique, not a technology, that replaces real experiences with guided experiences reproducing important aspects of the real world in a fully interactive fashion [iii]. In the following chapters the reader will be introduced to the world of simulation in topics of current interest such as medicine, military purposes and their use in industry for diverse applications that range from the use of networks to combining thermal, chemical or electrical aspects, among others. We hope that after reading the different sections of this book we will have succeeded in bringing across what the scientific community is doing in the field of simulation and that it will be to your interest and liking. Lastly, we would like to thank all the authors for their excellent contributions in the different areas of simulation.
Download or read book Analysis and Design of Discrete Part Production Lines written by Chrissoleon T. Papadopoulos and published by Springer Science & Business Media. This book was released on 2009-05-30 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a complete overview of production systems and describes the best approaches to analyze their performance. Written by experts in the field, this work also presents numerous techniques that can be used to describe, model, and optimize the performance of various types of production lines. The book is intended for researchers, production managers, and graduate students in industrial, mechanical, and systems engineering.
Download or read book Optimization of Manufacturing Systems Using the Internet of Things written by Yingfeng Zhang and published by Academic Press. This book was released on 2016-10-21 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization of Manufacturing Systems Using the Internet of Things extends the IoT (Internet of Things) into the manufacturing field to develop an IoMT (Internet of Manufacturing Things) architecture with real-time traceability, visibility, and interoperability in production planning, execution, and control. This book is essential reading for anyone interested in the optimization and control of an intelligent manufacturing system. As modern manufacturing shop-floors can create bottlenecks in the capturing and collection of real-time field information, and because paper-based manual systems are time-consuming and prone to errors, this book helps readers understand how to alleviate these issues, assisting them in their decision-making on shop-floors.. Includes case studies in implementing IoTs for data acquisition, monitoring, and assembly in manufacturing. Helps manufacturers to tackle the growing complexities and uncertainties of manufacturing systems in globalized business environments Acts as an introduction to using IoT for readers across industrial and manufacturing engineering
Download or read book Dynamic Stochastic Optimization written by Kurt Marti and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uncertainties and changes are pervasive characteristics of modern systems involving interactions between humans, economics, nature and technology. These systems are often too complex to allow for precise evaluations and, as a result, the lack of proper management (control) may create significant risks. In order to develop robust strategies we need approaches which explic itly deal with uncertainties, risks and changing conditions. One rather general approach is to characterize (explicitly or implicitly) uncertainties by objec tive or subjective probabilities (measures of confidence or belief). This leads us to stochastic optimization problems which can rarely be solved by using the standard deterministic optimization and optimal control methods. In the stochastic optimization the accent is on problems with a large number of deci sion and random variables, and consequently the focus ofattention is directed to efficient solution procedures rather than to (analytical) closed-form solu tions. Objective and constraint functions of dynamic stochastic optimization problems have the form of multidimensional integrals of rather involved in that may have a nonsmooth and even discontinuous character - the tegrands typical situation for "hit-or-miss" type of decision making problems involving irreversibility ofdecisions or/and abrupt changes ofthe system. In general, the exact evaluation of such functions (as is assumed in the standard optimization and control theory) is practically impossible. Also, the problem does not often possess the separability properties that allow to derive the standard in control theory recursive (Bellman) equations.
