Download or read book Performance Based Gear Metrology written by William D. Mark and published by John Wiley & Sons. This book was released on 2012-11-09 with total page 273 pages. Available in PDF, EPUB and Kindle. Book excerpt: A mathematically rigorous explanation of how manufacturing deviations and damage on the working surfaces of gear teeth cause transmission-error contributions to vibration excitations Some gear-tooth working-surface manufacturing deviations of significant amplitude cause negligible vibration excitation and noise, yet others of minuscule amplitude are a source of significant vibration excitation and noise. Presently available computer-numerically-controlled dedicated gear metrology equipment can measure such error patterns on a gear in a few hours in sufficient detail to enable accurate computation and diagnosis of the resultant transmission-error vibration excitation. How to efficiently measure such working-surface deviations, compute from these measurements the resultant transmission-error vibration excitation, and diagnose the manufacturing source of the deviations, is the subject of this book. Use of the technology in this book will allow quality spot checks to be made on gears being manufactured in a production run, to avoid undesirable vibration or noise excitation by the manufactured gears. Furthermore, those working in academia and industry needing a full mathematical understanding of the relationships between tooth working-surface deviations and the vibration excitations caused by these deviations will find the book indispensable for applications pertaining to both gear-quality and gear-health monitoring. Key features: Provides a very efficient method for measuring parallel-axis helical or spur gears in sufficient detail to enable accurate computation of transmission-error contributions from working-surface deviations, and algorithms required to carry out these computations, including examples Provides algorithms for computing the working-surface deviations causing any user-identified tone, such as ‘ghost tones,’ or ‘sidebands’ of the tooth-meshing harmonics, enabling diagnosis of their manufacturing causes, including examples Provides explanations of all harmonics observed in gear-caused vibration and noise spectra. Enables generation of three-dimensional displays and detailed numerical descriptions of all measured and computed working-surface deviations, including examples

Download or read book Gear Metrology written by C. A. Scoles and published by . This book was released on 1969 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Laser Metrology and Machine Performance V written by G. N. Peggs and published by Computational Mechanics. This book was released on 2001 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reporting on the latest international standards, calibration and certification procedures, this volume contains the official proceedings of the Fifth International Conference on Laser Metrology, Machine Tool, CMM and Robot Performance. Areas highlighted include: machine tool condition monitoring and calibration; co-ordination of metrology and its application to manufacturing performance and industrial inspection; new techniques in performance assessment and verification; numerical and computational tools.

Download or read book Dudley s Handbook of Practical Gear Design and Manufacture written by Stephen P. Radzevich and published by CRC Press. This book was released on 2016-09-15 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dudley's Handbook of Practical Gear Design & Manufacture, Third Edition, is the definitive reference work for gear design, production, inspection, and application. This fully updated edition provides practical methods of gear design, and gear manufacturing methods, for high-, medium-, and low-volume production. Comprehensive tables and references are included in the text and in its extensive appendices, providing an invaluable source information for all those involved in the field of gear technology.

Download or read book Laser Metrology and Machine Performance III written by D. G. Ford and published by Computational Mechanics. This book was released on 1997 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text presents the latest technology for assessing the performance of machine tools, coordinate measuring machines and robotics. It also details procedures involving international calibration, certification and standardization, and introduces the gear and transmission metrology section.

Download or read book Gear Cutting Tools written by Stephen P. Radzevich and published by CRC Press. This book was released on 2017-10-16 with total page 1183 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gear Cutting Tools: Fundamentals of Design and Computation, Second Edition, presents the DG/K-based method of surface generation, a practical mathematical method for designing gear cutting tools with optimal parameters. The text addresss gear cutting tool evolution, and proceeds to scientific classification for all types of gear machining meshes before discussing optimal cutting tool designs. Designs currently used and those being planned are covered, and the approach allows for development of scientific predictions and optimal designs. Solutions appear in analytical form and/or graphical form, with a wealth of new figures added, and new appendices offer additional data for readers.

Download or read book Engineering Metrology written by D. M. Anthony and published by Pergamon. This book was released on 1986 with total page 248 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook comprehensively covers metrology principles and modern inspection methods in all their forms, and offers practical guidance on the choice of options available for carrying out specific inspection tasks. A wide range of industrial applications is covered in depth, including the use of electronic and computer-aided measurement techniques. Significant emphasis is placed on assisting the practitioner to assess the cost-benefit implications when selecting the most efficient and economic method of measurement.

Download or read book Gear measurement written by National Physical Laboratory: Metrology Department and published by . This book was released on 1924 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Measurement Uncertainty in Gear Metrology written by Robert Charles Frazer and published by . This book was released on 2007 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Power Transmissions written by Datong Qin and published by CRC Press. This book was released on 2016-11-10 with total page 2126 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents papers from the International Conference on Power Transmissions 2016, held in Chongqing, China, 27th-30th October 2016. The main objective of this conference is to provide a forum for the most recent advances, addressing the challenges in modern mechanical transmissions. The conference proceedings address all aspects of gear and power transmission technology and a range of applications. The presented papers are catalogued into three main tracks, including design, simulation and testing, materials and manufacturing, and industrial applications. The design, simulation and testing track covers topics such as new methods and designs for all types of transmissions, modelling and simulation of power transmissions, strength, fatigue, dynamics and reliability of power transmissions, lubrication and sealing technologies and theories, and fault diagnosis of power transmissions. In the materials and manufacturing track, topics include new materials and heat treatment of power transmissions, new manufacturing technologies of power transmissions, improved tools to predict future demands on production systems, new technologies for ecologically sustainable productions and those which preserve natural resources, and measuring technologies of power transmissions. The proceedings also cover the novel industrial applications of power transmissions in marine, aerospace and railway contexts, wind turbines, the automotive industry, construction machinery, and robots.

Download or read book Advances in Manufacturing III written by Magdalena Diering and published by Springer Nature. This book was released on 2022-04-15 with total page 183 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers timely contributions on metrology and measurement systems, across different disciplines and fields of applications. The chapters, which were presented at the 7th International Scientific-Technical Conference, MANUFACTURING 2022, held on May 16-19, 2022, in Poznan, Poland, cover cutting-edge research and best-practices concerning the use of optical, computed tomographic, and coordinate metrology systems to assess the fidelity of 3D printing processes and products. They discuss strategies for automating, and for improving the effectiveness of quality control and measuring processes. All in all, this book provides both researchers and practitioners with a timely guide on cutting-edge measuring systems supporting the development of modern and additive manufacturing in the context of industry 4.0.

Download or read book Update on the National Center for Gear Metrology written by Bruce L. Cox and published by . This book was released on 2000 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook of Dimensional Measurement written by Francis T. Farago and published by Industrial Press Inc.. This book was released on 1994 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nineteen Fact-Filled Charters that contain authoritative treatment of all aspects of dimensional measurement technology make Handbook of Dimensional Measurement the most readable and comprehensive guide available for engineers and technicians engages in the various stages of industrial production. Design engineers, manufacturing engineers, tool and gage makers, quality control specialists, and reliability experts will find a wealth of practical data as well as complete coverage - both basic and advanced - of dimensional measurement techniques and equipment. The Third Edition of this classic book has been completely revised to include the computer and electronics revolution in metrology. Virtually every type of measurement instrument and machine, even the newest devices, can be found in these pages. Hundreds of changes, and additions and scores of new illustrations have been incorporated to assure that Handbook of Dimensional Measurement retains its status as the standard reference for the practitioner of dimensional measurement.

Download or read book Airplane Performance on Grass Airfields written by Jaroslaw A. Pytka and published by CRC Press. This book was released on 2023-03-14 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Airplane Performance on Grass Airfields presents an experiment-based approach to analysis and flight testing of airfield performance on grass runways. It discusses improvements for operational efficiency and safety of these airfields. The book analyzes the interaction between the landing gear wheels and the surface of a grass runways during both takeoff and landing. Considering the ground performance of an aircraft on a grass runway, the book covers test methods and devices for measuring performance and introduces an information system for the surface condition of grass airfields: GARFIELD. The system is based on a tire-grass interaction model and uses digital soil maps, as well as current meteorological data obtained from a weather server. The book is intended for researchers and practicing engineers in the fields of aviation and aircraft safety and performance.

Download or read book Selected papers from the 2019 IEEE International Workshop on Metrology for AeroSpace written by Pasquale Daponte and published by MDPI. This book was released on 2021-04-21 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is devoted to recent developments of instrumentation and measurement techniques applied to the aerospace field. It includes 23 selected papers from the 2019 IEEE International Workshop on Metrology for AeroSpace. Measurements are essential for obtaining a deeper knowledge of a phenomenon or an asset, as well as for making proper decisions and proposing new and efficient solutions, and this is especially true in environments as complex as aerospace. The research contributions included in the book can raise the interest of a wide group of researchers, operators and decision-makers from metrology and aerospace fields by presenting the most innovative solutions in this field from the scientific and technological points of view.

Download or read book Materials Metrology and Standards for Structural Performance written by B.F. Dyson and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a contributed reference work from international authors from both industry and academia. It deals with materials metrology and standards for engineering design. This includes examination of metrological considerations as well as investigating the many measurement and control techniques. It will be of interest to all materials scientists and engineers from graduates to experienced professionals and will be particularly useful to all those involved with measurement instrumentation.

Download or read book Surface Metrology for Micro and Nanofabrication written by Wei Gao and published by Elsevier. This book was released on 2020-10-30 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Surface Metrology for Micro- and Nanofabrication presents state-of-the-art measurement technologies for surface metrology in fabrication of micro- and nanodevices or components. This includes the newest general-purpose scanning probe microscopes, and both contact and non-contact surface profilers. In addition, the book outlines characterization and calibration techniques, as well as in-situ, on-machine, and in-process measurements for micro- and nanofabrication. - Provides materials scientists and engineers with an informed overview of the state-of-the-art in surface metrology - Helps readers select and design the optimized surface metrology systems and carry out proper surface metrology practices in the fabrication of micro/nano-devices and components - Assesses the best techniques for repairing micro-defects