Download or read book Performance based Design of Concrete Building for Wind Loads written by Joseph M. Bracci and published by . This book was released on 2006 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance Based Design of Concrete Building for Wind Loads written by J. M. Bracci and published by . This book was released on 2006-12-14 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Performance Based Seismic Design for Tall Buildings written by Ramin Golesorkhi and published by . This book was released on 2017-10-30 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance-Based Seismic Design (PBSD) is a structural design methodology that has become more common in urban centers around the world, particularly for the design of high-rise buildings. The primary benefit of PBSD is that it substantiates exceptions to prescribed code requirements, such as height limits applied to specific structural systems, and allows project teams to demonstrate higher performance levels for structures during a seismic event.However, the methodology also involves significantly more effort in the analysis and design stages, with verification of building performance required at multiple seismic demand levels using Nonlinear Response History Analysis (NRHA). The design process also requires substantial knowledge of overall building performance and analytical modeling, in order to proportion and detail structural systems to meet specific performance objectives.This CTBUH Technical Guide provides structural engineers, developers, and contractors with a general understanding of the PBSD process by presenting case studies that demonstrate the issues commonly encountered when using the methodology, along with their corresponding solutions. The guide also provides references to the latest industry guidelines, as applied in the western United States, with the goal of disseminating these methods to an international audience for the advancement and expansion of PBSD principles worldwide.
Download or read book Minimum Design Loads and Associated Criteria for Buildings and Other Structures written by American Society of Civil Engineers and published by ASCE Press. This book was released on 2022-02 with total page 1046 pages. Available in PDF, EPUB and Kindle. Book excerpt: Standard ASCE/SEI 7-22 provides requirements for general structural design and includes means for determining various loads and their combinations, which are suitable for inclusion in building codes and other documents.
Download or read book Performance Based Seismic Design of Concrete Structures and Infrastructures written by Plevris, Vagelis and published by IGI Global. This book was released on 2017-02-14 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid design and craftsmanship are a necessity for structures and infrastructures that must stand up to natural disasters on a regular basis. Continuous research developments in the engineering field are imperative for sustaining buildings against the threat of earthquakes and other natural disasters. Performance-Based Seismic Design of Concrete Structures and Infrastructures is an informative reference source on all the latest trends and emerging data associated with structural design. Highlighting key topics such as seismic assessments, shear wall structures, and infrastructure resilience, this is an ideal resource for all academicians, students, professionals, and researchers that are seeking new knowledge on the best methods and techniques for designing solid structural designs.
Download or read book Model based Design of an Ultra High Performance Concrete Support Structure for a Wind Turbine written by Zheng Wang (M. Eng.) and published by . This book was released on 2007 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: (Cont.) Two tube-type cross sections are examined. The 3-d analysis reveals a sufficient flexural performance of the UHPC support tower when subjected to the extreme wind loads. Since this work only focuses on the extreme wind load case, other load cases, such as aerodynamic and operational cases, should be considered before it can be safely employed.
Download or read book Tall Building Design written by Bungale S. Taranath and published by CRC Press. This book was released on 2016-10-04 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt: Addresses the Question Frequently Proposed to the Designer by Architects: "Can We Do This? Offering guidance on how to use code-based procedures while at the same time providing an understanding of why provisions are necessary, Tall Building Design: Steel, Concrete, and Composite Systems methodically explores the structural behavior of steel, concrete, and composite members and systems. This text establishes the notion that design is a creative process, and not just an execution of framing proposals. It cultivates imaginative approaches by presenting examples specifically related to essential building codes and standards. Tying together precision and accuracy—it also bridges the gap between two design approaches—one based on initiative skill and the other based on computer skill. The book explains loads and load combinations typically used in building design, explores methods for determining design wind loads using the provisions of ASCE 7-10, and examines wind tunnel procedures. It defines conceptual seismic design, as the avoidance or minimization of problems created by the effects of seismic excitation. It introduces the concept of performance-based design (PBD). It also addresses serviceability considerations, prediction of tall building motions, damping devices, seismic isolation, blast-resistant design, and progressive collapse. The final chapters explain gravity and lateral systems for steel, concrete, and composite buildings. The Book Also Considers: Preliminary analysis and design techniques The structural rehabilitation of seismically vulnerable steel and concrete buildings Design differences between code-sponsored approaches The concept of ductility trade-off for strength Tall Building Design: Steel, Concrete, and Composite Systems is a structural design guide and reference for practicing engineers and educators, as well as recent graduates entering the structural engineering profession. This text examines all major concrete, steel, and composite building systems, and uses the most up-to-date building codes.
Download or read book Recommended Seismic Design Criteria for New Steel Moment Frame Buildings FEMA 350 written by Federal Emergency Agency and published by FEMA. This book was released on 2013-03-16 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report, FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings has been developed by the SAC Joint Venture under contract to the Federal Emergency Management Agency (FEMA) to provide organizations engaged in the development of consensus design standards and building code provisions with recommended criteria for the design and construction of new buildings incorporating moment-resisting steel frame construction to resist the effects of earthquakes. It is one of a series of companion publications addressing the issue of the seismic performance of steel moment-frame buildings. The set of companion publications includes: FEMA-350 - Recommended Seismic Design Criteria for New Steel Moment-Frame Buildings. This publication provides recommended criteria, supplemental to FEMA-302 - 1997 NEHRP Recommended Provisions for Seismic Regulations for New Buildings and Other Structures, for the design and construction of steel moment-frame buildings and provides alternative performance-based design criteria. FEMA-351 - Recommended Seismic Evaluation and Upgrade Criteria for Existing Welded Steel Moment-Frame Buildings. This publication provides recommended methods to evaluate the probable performance of existing steel moment-frame buildings in future earthquakes and to retrofit these buildings for improved performance. FEMA-352 - Recommended Postearthquake Evaluation and Repair Criteria for Welded Steel Moment-Frame Buildings. This publication provides recommendations for performing postearthquake inspections to detect damage in steel moment-frame buildings following an earthquake, evaluating the damaged buildings to determine their safety in the postearthquake environment, and repairing damaged buildings. FEMA-353 - Recommended Specifications and Quality Assurance Guidelines for Steel Moment-Frame Construction for Seismic Applications. This publication provides recommended specifications for the fabrication and erection of steel moment frames for seismic applications. The recommended design criteria contained in the other companion documents are based on the material and workmanship standards contained in this document, which also includes discussion of the basis for the quality control and quality assurance criteria contained in the recommended specifications. The information contained in these recommended design criteria, hereinafter referred to as Recommended Criteria, is presented in the form of specific design and performance evaluation procedures together with supporting commentary explaining part of the basis for these recommendations.
Download or read book The Seismic Design Handbook written by Farzad Naeim and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 816 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook contains up-to-date existing structures, computer applications, and infonnation on planning, analysis, and design seismic design of wood structures. A new and very useful feature of this edition of earthquake-resistant building structures. Its intention is to provide engineers, architects, is the inclusion of a companion CD-ROM disc developers, and students of structural containing the complete digital version of the handbook itself and the following very engineering and architecture with authoritative, yet practical, design infonnation. It represents important publications: an attempt to bridge the persisting gap between l. UBC-IBC (1997-2000) Structural advances in the theories and concepts of Comparisons and Cross References, ICBO, earthquake-resistant design and their 2000. implementation in seismic design practice. 2. NEHRP Guidelines for the Seismic The distinguished panel of contributors is Rehabilitation of Buildings, FEMA-273, Federal Emergency Management Agency, composed of 22 experts from industry and universities, recognized for their knowledge and 1997. extensive practical experience in their fields. 3. NEHRP Commentary on the Guidelinesfor They have aimed to present clearly and the Seismic Rehabilitation of Buildings, FEMA-274, Federal Emergency concisely the basic principles and procedures pertinent to each subject and to illustrate with Management Agency, 1997. practical examples the application of these 4. NEHRP Recommended Provisions for principles and procedures in seismic design Seismic Regulations for New Buildings and practice. Where applicable, the provisions of Older Structures, Part 1 - Provisions, various seismic design standards such as mc FEMA-302, Federal Emergency 2000, UBC-97, FEMA-273/274 and ATC-40 Management Agency, 1997.
Download or read book Prestandard for Performance based Wind Design written by American Society of Civil Engineers and published by . This book was released on 2019 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: "The purpose of this book is to advance the wind design of tall buildings, enabling the performance-based design, review, acceptance, and construction of buildings using analyses, materials, structural systems, and devices that may or may not be covered by the prescriptive provisions of today's building codes"--
Download or read book Guidelines for Design of Low Rise Buildings Subjected to Lateral Forces written by Ajaya Kumar Gupta and published by CRC Press. This book was released on 2020-11-25 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: Guidelines for Design of Low-Rise Buildings Subjected to Lateral Forces is a concise guide that identifies performance issues, concerns, and research needs associated with low-rise buildings. The book begins with an introduction that discusses special problems with low-rise buildings subjected to wind and earthquakes. Chapter 2 examines probabilistic methods and their use in evaluating risks from natural hazards. It also addresses the characteristics of wind and seismic forces and levels of risk implied by building codes. Wind forces are covered in more detail in Chapter 3, with discussions of wind force concepts and wind-structure interactions. Chapter 4 is devoted to earthquake forces and traces the development of building codes for earthquake resistant design. Chapter 5 describes the main framing systems used to resist lateral forces and discusses the code requirements for drift control. The designs and requirements for connections between building elements are addressed in Chapter 6. It includes examples along with several illustrations of suitable connections. The performance of non-structural elements during wind and earthquake forces is also examined in detail. This book serves as an important reference for civil engineers, construction engineers, architects, and anyone concerned with structural codes and standards. It is an excellent guide that can be used to supplement design recommendations and provide a design basis where there are no current requirements.
Download or read book Development of a Probability Based Load Criterion for American National Standard A58 written by Bruce R. Ellingwood and published by . This book was released on 1980 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Buildings and Structures under Extreme Loads written by Chiara Bedon and published by MDPI. This book was released on 2020-11-25 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt: Exceptional loads on buildings and structures may have different causes, including high-strain dynamic effects due to natural hazards, man-made attacks, and accidents, as well as extreme operational conditions (severe temperature variations, humidity, etc.). All of these aspects can be critical for specific structural typologies and/or materials that are particularly sensitive to external conditions. In this regard, dedicated and refined methods are required for their design, analysis, and maintenance under the expected lifetime. There are major challenges related to the structural typology and material properties with respect to the key features of the imposed design load. Further issues can be derived from the need for risk mitigation or retrofit of existing structures as well as from the optimal and safe design of innovative materials/systems. Finally, in some cases, no appropriate design recommendations are available and, thus, experimental investigations can have a key role within the overall process. In this Special Issue, original research studies, review papers, and experimental and/or numerical investigations are presented for the structural performance assessment of buildings and structures under various extreme conditions that are of interest for design.
Download or read book Tall buildings written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2014-08-01 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: fib Bulletin 73: Tall Buildings is the result of a collaboration between the fib and MPA The Concrete Centre (UK). Task Group 1.6 High-rise buildings, within fib Commission 1: Structures, was drawn together with a mandate to write about the experience and know-how pertinent to the development, design and construction of tall concrete buildings. The group’s findings are presented in this state-of the-art report. Tall buildings are a unique challenge to engineers, even to those with extensive experience of low-rise structures. The bulletin explains the critical interfaces with other professionals, for example architects, building services engineers, façade and lift specialists, geotechnical engineers and wind specialists, highlighting how these parties interact with engineers and can influence and guide the development of the structural solution. The key factors in choosing the most appropriate structural system are discussed. The bulletin covers the criteria used to select the most economical structural elements including the foundations, the vertical elements and the floor slabs. Examples of common construction methods are presented and their effects on the structural engineering design are discussed. Tall buildings can undergo significant deformation during their construction and service life. These movements need to be understood by the designer and potentially compensated for in the design and during construction. One of the main particularities of the design of tall buildings is the dominance of the lateral loading from wind and seismic actions. The bulletin provides a discussion of these important topics and sets out the current approach taken by experienced engineers. Designers of tall buildings also need to understand the dynamic behaviour of the structure and confine the motion of the building to within acceptable limits. Approaches to damping and dynamic performance are discussed and guidance provided on the appropriate occupant comfort limits.
Download or read book Wind Effects on Buildings and Design of Wind Sensitive Structures written by Ted Stathopoulos and published by Springer Science & Business Media. This book was released on 2007-12-31 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by seven internationally known experts, the articles in this book present the fundamentals and practical applications of contemporary wind engineering. It covers complex problems in wind-building interaction from the perspective of a structural designer, examining both experimental and computational approaches and their relative merits.
Download or read book Tall Building Criteria and Loading written by Leslie E. Robertson and published by ASCE Publications. This book was released on 1980-01-01 with total page 916 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by the Council on Tall Buildings and Urban Habitat of ASCE. This report examines the loads to which tall buildings are subjected so that engineers can precisely define the related structural elements that are necessary before translating a client's needs into a safe design. The report explores five different classes of loads?gravity loads and temperature affects, earthquake loads, wind loading and wind effects, fire, and accidental loads?as well as quality control and overall safety considerations.ØSteel buildings, which hold the record for height, tax the designer's ingenuity to provide adequate resistance to lateral loading. Concrete buildings are both more numerous and widely distributed, and for them vertical gravity loads may be the chief problem. Both steel and concrete buildings and lateral and vertical loads are addressed. Other subjects covered include: dead, live, cyclic snow, construction, and combined loads; code requirements; meteorological and environmental factors in design; firefighting provisions; and modeling. Contributions came from more than 800 contributors, all international and professional and heavily representing design and industrial firms. Condensed references follow each chapter, and a glossary is included.
Download or read book Earthquake Engineering in Europe written by Mihail Garevski and published by Springer Science & Business Media. This book was released on 2010-08-05 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 9 invited keynote and 12 theme lectures presented at the 14th European Conference on Earthquake Engineering (14ECEE) held in Ohrid, Republic of Macedonia, from August 30 to September 3, 2010. The conference was organized by the Macedonian Association for Earthquake Engineering (MAEE), under the auspices of European Association for Earthquake Engineering (EAEE). The book is organized in twenty one state-of-the-art papers written by carefully selected very eminent researchers mainly from Europe but also from USA and Japan. The contributions provide a very comprehensive collection of topics on earthquake engineering, as well as interdisciplinary subjects such as engineering seismology and seismic risk assessment and management. Engineering seismology, geotechnical earthquake engineering, seismic performance of buildings, earthquake resistant engineering structures, new techniques and technologies and managing risk in seismic regions are all among the different topics covered in this book. The book also includes the First Ambraseys Distinguished Award Lecture given by Prof. Theo P. Tassios in the honor of Prof. Nicholas N. Ambraseys. The aim is to present the current state of knowledge and engineering practice, addressing recent and ongoing developments while also projecting innovative ideas for future research and development. It is not always possible to have so many selected manuscripts within the broad spectrum of earthquake engineering thus the book is unique in one sense and may serve as a good reference book for researchers in this field. Audience: This book will be of interest to civil engineers in the fields of geotechnical and structural earthquake engineering; scientists and researchers in the fields of seismology, geology and geophysics. Not only scientists, engineers and students, but also those interested in earthquake hazard assessment and mitigation will find in this book the most recent advances.
