Download or read book Performance Based Design and Evaluation of Reinforced Concrete Bridges written by Qi Zhang and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Evaluation of Reinforced Concrete Bridges for Seismic Resistance written by Mark Amos Aschheim and published by . This book was released on 1995 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Design and Evaluation of Reinforced Concrete Bridges for Seismic Resistance written by Mark Aschheim and published by . This book was released on 1997 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this report, seismic design approaches for reinforced concrete bridges are reviewed and uncertainties in seismic design and evaluation are discussed. The modeling of bridge components and systems is discussed, and analytical studies of the response series of simple bridges are made. The relative utility of several design approaches and stiffness assumptions for controlling seismic demands is assessed. Modeling of column and wall pier flexural and shear strengths is examined in detail, and available models for the inelastic shear strength of columns are compared with test data.

Download or read book Integrated Probabilistic Performance based Evaluation of Benchmark Reinforced Concrete Bridges written by Kevin Rory Mackie and published by . This book was released on 2008 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Performance based Seismic Bridge Design written by M. Lee Marsh and published by Transportation Research Board. This book was released on 2013 with total page 138 pages. Available in PDF, EPUB and Kindle. Book excerpt: "TRB's National Cooperative Highway Research Program (NCHRP) Synthesis 440, Performance-Based Seismic Bridge Design (PBSD) summarizes the current state of knowledge and practice for PBSD. PBSD is the process that links decision making for facility design with seismic input, facility response, and potential facility damage. The goal of PBSD is to provide decision makers and stakeholders with data that will enable them to allocate resources for construction based on levels of desired seismic performance"--Publisher's description.

Download or read book Safety and performance concept Reliability assessment of concrete structures written by fib Fédération internationale du béton and published by FIB - Féd. Int. du Béton. This book was released on 2018-08-01 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Concrete structures have been built for more than 100 years. At first, reinforced concrete was used for buildings and bridges, even for those with large spans. Lack of methods for structural analysis led to conservative and reliable design. Application of prestressed concrete started in the 40s and strongly developed in the 60s. The spans of bridges and other structures like halls, industrial structures, stands, etc. grew significantly larger. At that time, the knowledge of material behaviour, durability and overall structural performance was substantially less developed than it is today. In many countries statically determined systems with a fragile behavior were designed for cast in situ as well as precast structures. Lack of redundancy resulted in a low level of robustness in structural systems. In addition, the technical level of individual technologies (e.g. grouting of prestressed cables) was lower than it is today. The number of concrete structures, including prestressed ones, is extremely high. Over time and with increased loading, the necessity of maintaining safety and performance parameters is impossible without careful maintenance, smaller interventions, strengthening and even larger reconstructions. Although some claim that unsatisfactory structures should be replaced by new ones, it is often impossible, as authorities, in general, have only limited resources. Most structures have to remain in service, probably even longer than initially expected. In order to keep the existing concrete structures in an acceptable condition, the development of methods for monitoring, inspection and assessment, structural identification, nonlinear analysis, life cycle evaluation and safety and prediction of the future behaviour, etc. is necessary. The scatter of individual input parameters must be considered as a whole. This requires probabilistic approaches to individual partial problems and to the overall analysis. The members of the fib Task Group 2.8 “Safety and performance concepts” wrote, on the basis of the actual knowledge and experience, a comprehensive document that provides crucial knowledge for existing structures, which is also applicable to new structures. This guide to good practice is divided into 10 basic chapters dealing with individual issues that are critical for activities associated with preferably existing concrete structures. Bulletin 86 starts with the specification of the performance-based requirements during the entire lifecycle. The risk issues are described in chapter two. An extensive part is devoted to structural reliability, including practical engineering approaches and reliability assessment of existing structures. Safety concepts for design consider the lifetime of structures and summarise safety formats from simple partial safety factors to develop approaches suitable for application in sophisticated, probabilistic, non-linear analyses. Testing for design and the determination of design values from the tests is an extremely important issue. This is especially true for the evaluation of existing structures. Inspection and monitoring of existing structures are essential for maintenance, for the prediction of remaining service life and for the planning of interventions. Chapter nine presents probabilistically-based models for material degradation processes. Finally, case studies are presented in chapter ten. The results of the concrete structures monitoring as well as their application for assessment and prediction of their future behaviour are shown. The risk analysis of highway bridges was based on extensive monitoring and numerical evaluation programs. Case studies perfectly illustrate the application of the methods presented in the Bulletin. The information provided in this guide is very useful for practitioners and scientists. It provides the reader with general procedures, from the specification of requirements, monitoring, assessment to the prediction of the structures’ lifecycles. However, one must have a sufficiently large amount of experimental and other data (e.g. construction experience) in order to use these methods correctly. This data finally allows for a statistical evaluation. As it is shown in case studies, extensive monitoring programs are necessary. The publication of this guide and other documents developed within the fib will hopefully help convince the authorities responsible for safe and fluent traffic on bridges and other structures that the costs spent in monitoring are first rather small, and second, they will repay in the form of a serious assessment providing necessary information for decision about maintenance and future of important structures.

Download or read book Displacement Based Design Methodologies written by and published by . This book was released on 2011 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report is the result of the contribution of the JRC towards the LESSLOSS Final Report on "Guidelines for Displacement-based Design of Buildings and ", edited by M.N. Fardis and printed by the IUSS Press of the Istituto Universitario Superiore di Pavia. The report is divided into three sections. The first section addresses the problem of the Displacement Based Evaluation/Design (DBE/D) of reinforced concrete bridges, focusing on the aims and limitations of current seismic evaluation and design practice and the tendencies of the displacement-based seismic evaluation/design methods. The second section presents the secant stiffness and equivalent viscous damping properties of reinforced concrete hollow rectangular bridge piers, both evaluated at maximum pier displacement, representing a significant design tool of direct application to the DBD of bridges, based on the concept of a substitute linear structure as originally defined by Gulkan and Sozen in 1967s. The third section addresses how to determine the deformability or stiffness of bridge piers resulting from the relative contributions of flexural and shear deformations, thus complementing the information given in the first two sections, necessary to complete the performance based design and assessment of a bridge.

Download or read book Structural Concrete Textbook Volume 5 written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2012-06-01 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The third edition of the Structural Concrete Textbook is an extensive revision that reflects advances in knowledge and technology over the past decade. It was prepared in the intermediate period from the CEP-FIP Model Code 1990 (MC90) tofib Model Code for Concrete Structures 2010 (MC2010), and as such incorporates a significant amount of information that has been already finalized for MC2010, while keeping some material from MC90 that was not yet modified considerably. The objective of the textbook is to give detailed information on a wide range of concrete engineering from selection of appropriate structural system and also materials, through design and execution and finally behaviour in use. The revised fib Structural Concrete Textbook covers the following main topics: phases of design process, conceptual design, short and long term properties of conventional concrete (including creep, shrinkage, fatigue and temperature influences), special types of concretes (such as self compacting concrete, architectural concrete, fibre reinforced concrete, high and ultra high performance concrete), properties of reinforcing and prestressing materials, bond, tension stiffening, moment-curvature, confining effect, dowel action, aggregate interlock; structural analysis (with or without time dependent effects), definition of limit states, control of cracking and deformations, design for moment, shear or torsion, buckling, fatigue, anchorages, splices, detailing; design for durability (including service life design aspects, deterioration mechanisms, modelling of deterioration mechanisms, environmental influences, influences of design and execution on durability); fire design (including changes in material and structural properties, spalling, degree of deterioration), member design (linear members and slabs with reinforcement layout, deep beams); management, assessment, maintenance, repair (including, conservation strategies, risk management, types of interventions) as well as aspects of execution (quality assurance), formwork and curing. The updated textbook provides the basics of material and structural behaviour and the fundamental knowledge needed for the design, assessment or retrofitting of concrete structures. It will be essential reading material for graduate students in the field of structural concrete, and also assist designers and consultants in understanding the background to the rules they apply in their practice. Furthermore, it should prove particularly valuable to users of the new editions of Eurocode 2 for concrete buildings, bridges and container structures, which are based only partly on MC90 and partly on more recent knowledge which was not included in the 1999 edition of the textbook.

Download or read book Bridge Design and Evaluation written by Gongkang Fu and published by John Wiley & Sons. This book was released on 2013-01-09 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: A succinct, real-world approach to complete bridge system design and evaluation Load and Resistance Factor Design (LRFD) and Load and Resistance Factor Rating (LRFR) are design and evaluation methods that have replaced or offered alternatives to other traditional methods as the new standards for designing and load-rating U.S. highway bridges. Bridge Design and Evaluation covers complete bridge systems (substructure and superstructure) in one succinct, manageable package. It presents real-world bridge examples demonstrating both their design and evaluation using LRFD and LRFR. Designed for a 3- to 4-credit undergraduate or graduate-level course, it presents the fundamentals of the topic without expanding needlessly into advanced or specialized topics. Important features include: Exclusive focus on LRFD and LRFR Hundreds of photographs and figures of real bridges to connect the theoretical with the practical Design and evaluation examples from real bridges including actual bridge plans and drawings and design methodologies Numerous exercise problems Specific design for a 3- to 4-credit course at the undergraduate or graduate level The only bridge engineering textbook to cover the important topics of bridge evaluation and rating Bridge Design and Evaluation is the most up-to-date and inclusive introduction available for students in civil engineering specializing in structural and transportation engineering.

Download or read book Structural Concrete in Performance based Seismic Design of Bridges written by Pedro F. Silva and published by . This book was released on 2010 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Load Testing of Bridges Two Volume Set written by Eva Lantsoght and published by CRC Press. This book was released on 2022-07-30 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt: Load Testing of Bridges, featuring contributions from almost fifty authors from around the world across two interrelated volumes, deals with the practical aspects, the scientific developments, and the international views on the topic of load testing of bridges. Volume 12, Load Testing of Bridges: Current practice and Diagnostic Load Testing, starts with a background to bridge load testing, including the historical perspectives and evolutions, and the current codes and guidelines that are governing in countries around the world. The second part of the book deals with preparation, execution, and post-processing of load tests on bridges. The third part focuses on diagnostic load testing of bridges. Volume 13, Load Testing of Bridges: Proof Load Testing and the Future of Load Testing, focuses first on proof load testing of bridges. It discusses the specific aspects of proof load testing during the preparation, execution, and post-processing of such a test (Part 1). The second part covers the testing of buildings. The third part discusses novel ideas regarding measurement techniques used for load testing. Methods using non-contact sensors, such as photography- and video-based measurement techniques are discussed. The fourth part discusses load testing in the framework of reliability-based decision-making and in the framework of a bridge management program. The final part of the book summarizes the knowledge presented across the two volumes, as well as the remaining open questions for research, and provides practical recommendations for engineers carrying out load tests. This work will be of interest to researchers and academics in the field of civil/structural engineering, practicing engineers and road authorities worldwide.

Download or read book An Evaluation of Present Practice for Reinforced Concrete Bridge Design written by Dayanand Chegu and published by . This book was released on 1969 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Monitoring and Safety Evaluation of Existing Concrete Structures written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2003 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The condition assessment of aged structures is becoming a more and more important issue for civil infrastructure management systems. The continued use of existing systems is, due to environmental, economical and socio-political assets, of great significance and is growing larger every year. Thus the extent of necessary repair of damaged reinforced concrete structures is of major concern in most countries today. Monitoring techniques may have a decisive input to limit expenditures for maintenance and repair of existing structures. Modern test and measurement methods as well as computational mechanics open the door for a wide variety of monitoring applications. The need for quantitative and qualitative knowledge has led to the development and improvement of surveillance techniques, which have already found successful application in other disciplines such as medicine, physics and chemistry. The design of experimental test and measurement systems is inherently an interdisciplinary activity. The specification of the instrumentation to measure the structural response will involve the skills of civil, electrical and computer engineers. The main aim of fib Commission 5, Structural servicer life aspects, is to provide a rational procedure to obtain an optimal technical-economic performance of concrete structures in service and to ensure a feedback of experience gained to design, execution, maintenance and rehabilitation. Against this background fib Task Group 5.1 Monitoring and Safety Evaluation of Existing Concrete Structures had been established to evaluate the existing practice worldwide. The objective of this state-of-art report is to summarize the most important inspection and measuring methods, to describe the working process and to evaluate the applicability to structural monitoring. Particular emphasis is placed upon non-destructive systems, lifetime monitoring, data evaluation and safety aspects.

Download or read book Strength Evaluation of Existing Reinforced Concrete Bridges written by Roy A. Imbsen and published by Transportation Research Board National Research. This book was released on 1987 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reinforced Concrete Bridge Members written by United States. Bureau of Public Roads. Bridge Division and published by . This book was released on 1966 with total page 98 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Reinforced Concrete Bridges written by Frederick Rings and published by . This book was released on 1913 with total page 216 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Concrete International written by and published by . This book was released on 1998 with total page 692 pages. Available in PDF, EPUB and Kindle. Book excerpt: