Download or read book Process Development and Fabrication of PbTe Thermoelectric Elements written by F. R. Bennett and published by . This book was released on 1962 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advanced Thermoelectrics written by Zhifeng Ren and published by CRC Press. This book was released on 2017-11-06 with total page 790 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview on nanostructured thermoelectric materials and devices, covering fundamental concepts, synthesis techniques, device contacts and stability, and potential applications, especially in waste heat recovery and solar energy conversion. The contents focus on thermoelectric devices made from nanomaterials with high thermoelectric efficiency for use in large scale to generate megawatts electricity. Covers the latest discoveries, methods, technologies in materials, contacts, modules, and systems for thermoelectricity. Addresses practical details of how to improve the efficiency and power output of a generator by optimizing contacts and electrical conductivity. Gives tips on how to realize a realistic and usable device or module with attention to large scale industry synthesis and product development. Prof. Zhifeng Ren is M. D. Anderson Professor in the Department of Physics and the Texas Center for Superconductivity at the University of Houston. Prof. Yucheng Lan is an associate professor in Morgan State University. Prof. Qinyong Zhang is a professor in the Center for Advanced Materials and Energy at Xihua University of China.
Download or read book Nanomaterials for Sustainable Energy written by Quan Li and published by Springer. This book was released on 2016-05-12 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the unique mechanical, electrical, and optical properties of nanomaterials, which play an important role in the recent advances of energy-related applications. Different nanomaterials have been employed in energy saving, generation, harvest, conversion, storage, and transport processes very effectively and efficiently. Recent progress in the preparation, characterization and usage of 1D, 2D nanomaterials and hybrid architectures for energy-related applications and relevant technologies and devices, such as solar cells, thermoelectronics, piezoelectronics, solar water splitting, hydrogen production/storage, fuel cells, batteries, and supercapacitors is covered. Moreover, the book also highlights novel approaches in nanomaterials design and synthesis and evaluating materials sustainability issues. Contributions from active and leading experts regarding important aspects like the synthesis, assembly, and properties of nanomaterials for energy-related applications are compiled into a reference book. As evident from the diverse topics, the book will be very valuable to researchers working in the intersection of physics, chemistry, biology, materials science and engineering. It may set the standard and stimulates future developments in this rapidly emerging fertile frontier of nanomaterials for energy.
Download or read book Materials Aspect of Thermoelectricity written by Ctirad Uher and published by CRC Press. This book was released on 2016-11-25 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: In recent years, novel families of materials have been discovered and significant improvements in classical thermoelectric materials have been made. Thermoelectric generators are now being used to harvest industrial heat waste and convert it into electricity. This is being utilized in communal incinerators, large smelters, and cement plants. Leading car and truck companies are developing thermoelectric power generators to collect heat from the exhaust systems of gasoline and diesel engines. Additionally, thermoelectric coolers are being used in a variety of picnic boxes, vessels used to transport transplant organs, and in air-conditioned seats of mid-size cars. Consisting of twenty-one chapters written by top researchers in the field, this book explores the major advancements being made in the material aspects of thermoelectricity and provides a critical assessment in regards to the broadening of application opportunities for thermoelectric energy conversion.
Download or read book Growth of Crystals written by E.I. Givargizov and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, as the previous ones, consists primarily of review artic1es. However, it also contains a large quantity of original material on the growth of crystals and films. Priority is given to experimental work. Only two artic1es are concerned exc1usively with the theory of crystal growth. Theoretical aspects are treated in several others. This volume is divided into three parts. Part I, "Epitaxy and Transformations in Thin Films," stems from the current broad application of lasers and optical effects in general to crystal growth (in particular, the growth of thin films). The first three artic1es of the book are devoted to this topic. In particular, the laser pulse vaporization method, for which a comparatively slow deposition rate is typical (which should not always be viewed as a drawback), is distinguished by the unique kinetics of the initial growth stages. These are not entirely explained. However, this method is completely suitable for oriented or generally ordered growth of films under otherwise equal conditions. Another artic1e of this section is based on use of ultrashort (down to picosecond) laser pulses. It emphasizes the nonequilibrium processes of crystallization and decrystallization that are characteristic for such influences. In particular, material heated above its melting point and metastable states in the semiconductor melt exhibit these qualities.
Download or read book Thermoelectricity and Advanced Thermoelectric Materials written by Ranjan Kumar and published by Woodhead Publishing. This book was released on 2021-06-03 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoelectricity and Advanced Thermoelectric Materials reviews emerging thermoelectric materials, including skutterudites, clathrates, and half-Heusler alloys. In addition, the book discusses a number of oxides and silicides that have promising thermoelectric properties. Because 2D materials with high figures of merit have emerged as promising candidates for thermoelectric applications, this book presents an updated introduction to the field of thermoelectric materials, including recent advances in materials synthesis, device modeling, and design. Finally, the book addresses the theoretical difficulties and methodologies of computing the thermoelectric properties of materials that can be used to understand and predict highly efficient thermoelectric materials. This book is a key reference for materials scientists, physicists, and engineers in energy. Reviews the most relevant, emerging thermoelectric materials, including 2D materials, skutterudites, clathrates and half-Heusler alloys Focuses on how electronic structure engineering can lead to improved materials performance for thermoelectric energy conversion applications Includes the latest advances in the synthesis, modeling and design of advanced thermoelectric materials
Download or read book Thermoelectric Energy Conversion written by Ryoji Funahashi and published by Woodhead Publishing. This book was released on 2021-01-19 with total page 732 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermoelectric Energy Conversion: Theories and Mechanisms, Materials, Devices, and Applications provides readers with foundational knowledge on key aspects of thermoelectric conversion and reviews future prospects. Sections cover the basic theories and mechanisms of thermoelectric physics, the chemical and physical aspects of classical to brand-new materials, measurement techniques of thermoelectric conversion properties from the materials to modules and current research, including the physics, crystallography and chemistry aspects of processing to produce thermoelectric devices. Finally, the book discusses thermoelectric conversion applications, including cooling, generation, energy harvesting, space, sensor and other emerging areas of applications. Reviews key applications of thermoelectric energy conversion, including cooling, power generation, energy harvesting, and applications for space and sensing Discusses a wide range of materials, including skutterudites, heusler materials, chalcogenides, oxides, low dimensional materials, and organic materials Provides the fundamentals of thermoelectric energy conversion, including the physics, phonon conduction, electronic correlation, magneto-seebeck theories, topological insulators and thermionics
Download or read book Recent Trends in Thermoelectric Materials Research Part Three written by and published by Elsevier. This book was released on 2001-01-03 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its inception in 1966, the series of numbered volumes known as Semiconductors and Semimetals has distinguished itself through the careful selection of well-known authors, editors, and contributors. The Willardson and Beer series, as it is widely known, has succeeded in producing numerous landmark volumes and chapters. Not only did many of these volumes make an impact at the time of their publication, but they continue to be well-cited years after their original release. Recently, Professor Eicke R. Weber of the University of California at Berkeley joined as a co-editor of the series. Professor Weber, a well-known expert in the field of semiconductor materials, will further contribute to continuing the series' tradition of publishing timely, highly relevant, and long-impacting volumes. Some of the recent volumes, such as Hydrogen in Semiconductors, Imperfections in III/V Materials, Epitaxial Microstructures, High-Speed Heterostructure Devices, Oxygen in Silicon, and others promise that this tradition will be maintained and even expanded. Thermoelectric materials may be used for solid state refrigeration or power generation applications via the large Peltier effect in these materials. To be an effective thermoelectric material, a material must possess a large Seebeck coefficient, a low resistivity and a low thermal conductivity. Due to increased need for alternative energy sources providing environmentally friendly refrigeration and power generation, thermoelectric materials research experienced a rebirth in the mid 1990's. Semiconductors and Semimetals, Volume 71: Recent Trends in Thermoelectric Materials Research: Part Three provides an overview of much of this research in thermoelectric materials during the decade of the 1990's. New materials and new material concepts such as quantum well and superlattice structures gave hope to the possibilities that might be achieved. An effort was made to focus on these new materials and not on materials such as BiTe alloys, since such recent reviews are available. Experts in the field who were active researchers during this period were the primary authors to this series of review articles. This is the most complete collection of review articles that are primarily focussed on new materials and new concepts that is existence to date.
Download or read book Semiconductor Nanomaterials written by Challa S. S. R. Kumar and published by John Wiley & Sons. This book was released on 2010-04-05 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book series Nanomaterials for the Life Sciences, provides an in-depth overview of all nanomaterial types and their uses in the life sciences. Each volume is dedicated to a specific material class and covers fundamentals, synthesis and characterization strategies, structure-property relationships and biomedical applications. The series brings nanomaterials to the Life Scientists and life science to the Materials Scientists so that synergies are seen and developed to the fullest. Written by international experts of various facets of this exciting field of research, the series is aimed at scientists of the following disciplines: biology, chemistry, materials science, physics, bioengineering, and medicine, together with cell biology, biomedical engineering, pharmaceutical chemistry, and toxicology, both in academia and fundamental research as well as in pharmaceutical companies. VOLUME 6 - Semiconductor Nanomaterials
Download or read book Transmission Electron Microscopy Characterization of Nanomaterials written by Challa S.S.R. Kumar and published by Springer Science & Business Media. This book was released on 2013-12-09 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Third volume of a 40volume series on nanoscience and nanotechnology, edited by the renowned scientist Challa S.S.R. Kumar. This handbook gives a comprehensive overview about Transmission electron microscopy characterization of nanomaterials. Modern applications and state-of-the-art techniques are covered and make this volume an essential reading for research scientists in academia and industry.
Download or read book CRC Handbook of Metal Etchants written by Perrin Walker and published by CRC Press. This book was released on 1990-12-11 with total page 1434 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication presents cleaning and etching solutions, their applications, and results on inorganic materials. It is a comprehensive collection of etching and cleaning solutions in a single source. Chemical formulas are presented in one of three standard formats - general, electrolytic or ionized gas formats - to insure inclusion of all necessary operational data as shown in references that accompany each numbered formula. The book describes other applications of specific solutions, including their use on other metals or metallic compounds. Physical properties, association of natural and man-made minerals, and materials are shown in relationship to crystal structure, special processing techniques and solid state devices and assemblies fabricated. This publication also presents a number of organic materials which are widely used in handling and general processing...waxes, plastics, and lacquers for example. It is useful to individuals involved in study, development, and processing of metals and metallic compounds. It is invaluable for readers from the college level to industrial R & D and full-scale device fabrication, testing and sales. Scientific disciplines, work areas and individuals with great interest include: chemistry, physics, metallurgy, geology, solid state, ceramic and glass, research libraries, individuals dealing with chemical processing of inorganic materials, societies and schools.
Download or read book TID written by and published by . This book was released on 1965 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Bismuth Lead and Tin Tellurides written by and published by . This book was released on 1965 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: A total of 699 references are included to journal articles and reports dealing with properties of bismuth, lead, and tin tellurides. The references are arranged by sujbect. Author and report-number indexes are included.
Download or read book Thermoelectric Energy Conversion written by Diana Davila Pineda and published by John Wiley & Sons. This book was released on 2017-08-22 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest volume in the well-established AMN series, this ready reference provides an up-to-date, self-contained summary of recent developments in the technologies and systems for thermoelectricity. Following an initial chapter that introduces the fundamentals and principles of thermoelectricity, subsequent chapters discuss the synthesis and integration of various bulk thermoelectric as well as nanostructured materials. The book then goes on to discuss characterization techniques, including various light and mechanic microscopy techniques, while also summarizing applications for thermoelectric materials, such as micro- and nano-thermoelectric generators, wearable electronics and energy conversion devices. The result is a bridge between industry and scientific researchers seeking to develop thermoelectric generators.
Download or read book Nanomaterials for Innovative Energy Systems and Devices written by Zishan H. Khan and published by Springer Nature. This book was released on 2022-05-24 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the latest research on applications of nanomaterials in the field of energy systems and devices. It provides an overview of the state-of-art research in this rapidly developing field. It discusses the design and fabrication of nanostructured materials and their energy applications. Various topics covered include nanomaterials for perovskite solar cells, transition metal dichalcogenides (TMDs) nanocomposites based supercapacitors, battery materials and technologies, major challenges toward development of efficient thermoelectric materials for energy efficient devices, extraction and experimentation of biodiesel produced from leachate oils of landfills coupled with nano-additives aluminium oxide and copper oxide on diesel engine and many more. It has contributions from world-renowned specialists in the fields of nanomaterials and energy devices. The book will be useful for students, researchers and professionals working in the area of nanomaterials and energy systems & devices.
Download or read book 2D Nanomaterials for Energy Applications written by Spyridon Zafeiratos and published by Elsevier. This book was released on 2019-11-22 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2D Nanomaterials for Energy Applications: Graphene and Beyond discusses the current state-of-the art of 2D nanomaterials used in energy-related applications. Sections cover nanogenerators, hydrogen storage and theoretical design. Each chapter focuses on a different energy application, thus allowing readers to gain a greater understanding of the most promising 2D materials in the field. The book's ultimate goal lies in describing how each energy technology is beneficial, hence it provides a valuable reference source for materials scientists and engineers. The physical and chemical properties of 2D materials can be effectively tuned through different strategies, such as controlling dimensions, the crystallographic structure and defects, or doping with heteroatoms. This flexibility facilitates the design of 2D materials for dedicated applications in the field of energy conversion and storage. Offers a single source for the major practical applications of 2D materials in the field of energy conversion and storage Explores how 2D materials are being used to create new, more efficient industrial energy products and devices Compares a variety of 2D materials, showing how the properties of a range of these materials make them beneficial for specific energy applications