Download or read book Particles at Fluid Interfaces and Membranes written by P. Kralchevsky and published by Elsevier. This book was released on 2001-01-22 with total page 669 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the small world of micrometer to nanometer scale many natural and industrial processes include attachment of colloid particles (solid spheres, liquid droplets, gas bubbles or protein macromolecules) to fluid interfaces and their confinement in liquid films. This may lead to the appearance of lateral interactions between particles at interfaces, or between inclusions in phospholipid membranes, followed eventually by the formation of two-dimensional ordered arrays. The book is devoted to the description of such processes, their consecutive stages, and to the investigation of the underlying physico-chemical mechanisms. The first six chapters give a concise but informative introduction to the basic knowledge in surface and colloid science, which includes both traditional concepts and some recent results. Chapters 1 and 2 are devoted to the basic theory of capillarity, kinetics of surfactant adsorption, shapes of axisymmetric fluid interfaces, contact angles and line tension. Chapters 3 and 4 present a generalization of the theory of capillarity to the case, in which the variation of the interfacial (membrane) curvature contributes to the total energy of the system. The generalized Laplace equation is applied to determine the configurations of free and adherent biological cells. Chapters 5 and 6 are focused on the role of thin liquid films and hydrodynamic factors in the attachment of solid and fluid particles to an interface. Surface forces of various physical nature are presented and their relative importance is discussed. Hydrodynamic interactions of a colloidal particle with an interface (or another particle) are also considered.Chapters 7 to 10 are devoted to the theoretical foundation of various kinds of capillary forces. When two particles are attached to the same interface (membrane), capillary interactions, mediated by the interface or membrane, appear between them. Two major kinds of capillary interactions are described: (i) capillary immersion force related to the surface wettability (Chapter 7), (ii) capillary flotation force originating from interfacial deformations due to particle weight (Chapter 8). Special attention is paid to the theory of capillary immersion forces between particles entrapped in spherical liquid films (Chapter 9). A generalization of the theory of immersion forces allows one to describe membrane-mediated interactions between protein inclusions into a lipid bilayer (Chapter 10).Chapter 11 is devoted to the theory of the capillary bridges and the capillary-bridge forces, whose importance has been recognized in phenomena like consolidation of granules and soils, wetting of powders, capillary condensation, long-range hydrophobic attraction, etc. The nucleation of capillary bridges is also examined.Chapter 12 considers solid particles, which have an irregular wetting perimeter upon attachment to a fluid interface. The undulated contact line induces interfacial deformations, which engender a special lateral capillary force between the particles. The latter contributes to the dilatational and shear elastic moduli of particulate adsorption monolayers.Chapter 13 describes how lateral capillary forces, facilitated by convective flows and some specific and non-specific interactions, can lead to the aggregation and ordering of various particles at fluid interfaces or in thin liquid films. Recent results on fabricating two-dimensional (2D) arrays from micrometer and sub-micrometer latex particles, as well as 2D crystals from proteins and protein complexes, are reviewed. Chapter 14 presents applied aspects of the particle-surface interaction in antifoaming and defoaming. The mechanisms of antifoaming action involve as a necessary step the entering of an antifoam particle at the air-water interface. The considered mechanisms indicate the factors for control of foaminess.

Download or read book Particles at Fluid Interfaces and Membranes written by P. Kralchevsky and published by . This book was released on 2001-01-22 with total page 680 pages. Available in PDF, EPUB and Kindle. Book excerpt: Planar fluid interfaces -- Interfaces of moderate curvature : theory of capillarity -- Surface bending moment and curvature elastic moduli -- General curved interfaces and biomembranes -- Liquid films and interactions between particle and surface -- Particles at interfaces : deformations and hydrodynamic interactions -- Lateral capillary forces between partially immersed bodies -- Lateral capillary forces between floating particles -- Capillary forces between particles bound to a spherical interface -- Mechanics of lipid membranes and interaction between inclusions -- Capillary bridges and capillary-bridge forces -- Capillary forces between particles of irregular contact line -- Two-dimensional crystallization of particulates and proteins -- Effect of oil drops and particulates on the stability of foams.

Download or read book Fluid Interfaces written by Eduardo Guzmán and published by MDPI. This book was released on 2021-03-02 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fluid interfaces are promising candidates for confining different types of materials, e.g., polymers, surfactants, colloids, and even small molecules, to be used in designing new functional materials with reduced dimensionality. The development of such materials requires a deepening of the physicochemical bases underlying the formation of layers at fluid interfaces as well as on the characterization of their structures and properties. This is of particular importance because the constraints associated with the assembly of materials at the interface lead to the emergence of equilibrium and features of dynamics in the interfacial systems, which are far removed from those conventionally found in traditional materials. This Special Issue is devoted to studies on the fundamental and applied aspects of fluid interfaces, and attempts to provide a comprehensive perspective on the current status of the research field.

Download or read book Colloidal Particles at Liquid Interfaces written by Bernard P. Binks and published by Cambridge University Press. This book was released on 2006-08-17 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: The understanding of how small solid particles operate at liquid interfaces is minimal. This book brings together the topics actively being investigated, with contributions from experts in the field. It will be of interest to researchers in chemistry, physics, chemical engineering, pharmacy, food science and materials science.

Download or read book Bijels written by Paul S Clegg and published by Royal Society of Chemistry. This book was released on 2020-03-27 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bicontinuous interfacially jammed emulsion gels, now commonly termed 'bijels', are a class of soft materials, in which interpenetrating, continuous domains of two immiscible fluids are maintained in a rigid arrangement by a jammed layer of colloidal particles at their interface. Such gels have unusual material properties that promise exciting applications across diverse fields from energy materials and catalysis, to food science. This is the first book on the subject and provides the reader with a fundamental introduction. Edited by a recognised authority on bijels, the reader will learn about the bijel and its formation. Bringing together current understanding, this book aims to bring the potential application of bijels to diverse materials challenges closer to fruition. This is a must-have resource for anyone working in soft matter and applied fields.

Download or read book Anisotropic Particle Assemblies written by Ning Wu and published by Elsevier. This book was released on 2018-07-12 with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt: Anisotropic Particle Assemblies: Synthesis, Assembly, Modeling, and Applications covers the synthesis, assembly, modeling, and applications of various types of anisotropic particles. Topics such as chemical synthesis and scalable fabrication of colloidal molecules, molecular mimetic self-assembly, directed assembly under external fields, theoretical and numerical multi-scale modeling, anisotropic materials with novel interfacial properties, and the applications of these topics in renewable energy, intelligent micro-machines, and biomedical fields are discussed in depth. Contributors to this book are internationally known experts who have been actively studying each of these subfields for many years.This book is an invaluable reference for researchers and chemical engineers who are working at the intersection of physics, chemistry, chemical engineering, and materials science and engineering. It educates students, trains the next generation of researchers, and stimulates continuous development in this rapidly emerging area for new materials and innovative technologies. - Provides comprehensive coverage on new developments in anisotropic particles - Features chapters written by emerging and leading experts in each of the subfields - Contains information that will appeal to a broad spectrum of professionals, including but not limited to chemical engineers, chemists, physicists, and materials scientists and engineers - Serves as both a reference book for researchers and a textbook for graduate students

Download or read book Particles at Fluid Interfaces written by Erica Wanless and published by Frontiers Media SA. This book was released on 2019-05-09 with total page 197 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particles at Fluid Interfaces encompasses the processes and formulations that involve the stabilisation of fluid interfaces by adsorbed particles. The prevalence of these multiphase materials underpins their use in a broad range of industries from personal care and food technology to oil and mineral processing. The stabilisation conferred by the adsorbed particles can be transient as found in froth flotation or long-lived as occurs within Pickering Emulsions. The particles can range in size from nanoparticles to millimetre-sized particles, and cover a spectrum from collapsed proteins, polymeric colloids of controlled size and shape to high dispersity mineral particles.

Download or read book Statistical Thermodynamics Of Surfaces Interfaces And Membranes written by Samuel Safran and published by CRC Press. This book was released on 2018-03-08 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt: Understanding the structural and thermodynamic properties of surfaces, interfaces, and membranes is important for both fundamental and practical reasons. Important applications include coatings, dispersants, encapsulating agents, and biological materials. Soft materials, important in the development of new materials and the basis of many biological systems, cannot be designed using trial and error methods due to the multiplicity of components and parameters. While these systems can sometimes be analyzed in terms of microscopic mixtures, it is often conceptually simpler to regard them as dispersions and to focus on the properties of the internal interfaces found in these systems. The basic physics centers on the properties of quasi-two-dimensional systems embedded in the three-dimensional world, thus exhibiting phenomena that do not exist in bulk materials. This approach is the basis behind the theoretical presentation of Statistical Thermodynamics of Surfaces, Interfaces, and Membranes. The approach adapted allows one to treat the rich diversity of phenomena investigated in the field of soft matter physics (including both colloid/interface science as well as the materials and macromolecular aspects of biological physics) such as interfacial tension, the roughening transition, wetting, interactions between surfaces, membrane elasticity, and self-assembly. Presented as a set of lecture notes, this book is aimed at physicists, physical chemists, biological physicists, chemical engineers, and materials scientists who are interested in the statistical mechanics that underlie the macroscopic, thermodynamic properties of surfaces, interfaces, and membranes. This paperback edition contains all the material published in the original hard-cover edition as well as additional clarifications and explanations.

Download or read book Physics of Biological Membranes written by Patricia Bassereau and published by Springer. This book was released on 2018-12-30 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book mainly focuses on key aspects of biomembranes that have emerged over the past 15 years. It covers static and dynamic descriptions, as well as modeling for membrane organization and shape at the local and global (at the cell level) scale. It also discusses several new developments in non-equilibrium aspects that have not yet been covered elsewhere. Biological membranes are the seat of interactions between cells and the rest of the world, and internally, they are at the core of complex dynamic reorganizations and chemical reactions. Despite the long tradition of membrane research in biophysics, the physics of cell membranes as well as of biomimetic or synthetic membranes is a rapidly developing field. Though successful books have already been published on this topic over the past decades, none include the most recent advances. Additionally, in this domain, the traditional distinction between biological and physical approaches tends to blur. This book gathers the most recent advances in this area, and will benefit biologists and physicists alike.

Download or read book Physics and Chemistry of Interfaces written by Hans-Jürgen Butt and published by John Wiley & Sons. This book was released on 2023-02-07 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics and Chemistry of Interfaces Comprehensive textbook on the interdisciplinary field of interface science, fully updated with new content on wetting, spectroscopy, and coatings Physics and Chemistry of Interfaces provides a comprehensive introduction to the field of surface and interface science, focusing on essential concepts rather than specific details, and on intuitive understanding rather than convoluted math. Numerous high-end applications from surface technology, biotechnology, and microelectronics are included to illustrate and help readers easily comprehend basic concepts. The new edition contains an increased number of problems with detailed, worked solutions, making it ideal as a self-study resource. In topic coverage, the highly qualified authors take a balanced approach, discussing advanced interface phenomena in detail while remaining comprehensible. Chapter summaries with the most important equations, facts, and phenomena are included to aid the reader in information retention. A few of the sample topics included in Physics and Chemistry of Interfaces are as follows: Liquid surfaces, covering microscopic picture of a liquid surface, surface tension, the equation of Young and Laplace, and curved liquid surfaces Thermodynamics of interfaces, covering surface excess, internal energy and Helmholtz energy, equilibrium conditions, and interfacial excess energies Charged interfaces and the electric double layer, covering planar surfaces, the Grahame equation, and limitations of the Poisson-Boltzmann theory Surface forces, covering Van der Waals forces between molecules, macroscopic calculations, the Derjaguin approximation, and disjoining pressure Physics and Chemistry of Interfaces is a complete reference on the subject, aimed at advanced students (and their instructors) in physics, material science, chemistry, and engineering. Researchers requiring background knowledge on surface and interface science will also benefit from the accessible yet in-depth coverage of the text.

Download or read book The Giant Vesicle Book written by Rumiana Dimova and published by CRC Press. This book was released on 2019-11-19 with total page 652 pages. Available in PDF, EPUB and Kindle. Book excerpt: Giant vesicles are widely used as a model membrane system, both for basic biological systems and for their promising applications in the development of smart materials and cell mimetics, as well as in driving new technologies in synthetic biology and for the cosmetics and pharmaceutical industry. The reader is guided to use giant vesicles, from the formation of simple membrane platforms to advanced membrane and cell system models. It also includes fundamentals for understanding lipid or polymer membrane structure, properties and behavior. Every chapter includes ideas for further applications and discussions on the implications of the observed phenomena towards understanding membrane-related processes. The Giant Vesicle Book is meant to be a road companion, a trusted guide for those making their first steps in this field as well as a source of information required by experts. Key Features • A complete summary of the field, covering fundamental concepts, practical methods, core theory, and the most promising applications • A start-up package of theoretical and experimental information for newcomers in the field • Extensive protocols for establishing the required preparations and assays • Tips and instructions for carefully performing and interpreting measurements with giant vesicles or for observing them, including pitfalls • Approaches developed for investigating giant vesicles as well as brief overviews of previous studies implementing the described techniques • Handy tables with data and structures for ready reference

Download or read book Foams and Emulsions written by J.F. Sadoc and published by Springer Science & Business Media. This book was released on 1999-03-31 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt: A general and introductory survey of foams, emulsions and cellular materials. Foams and emulsions are illustrations of some fundamental concepts in statistical thermodynamics, rheology, elasticity and the physics and chemistry of divided media and interfaces. They also give rise to some of the most beautiful geometrical shapes and tilings, ordered or disordered. The chapters are grouped into sections having fairly loose boundaries. Each chapter is intelligible alone, but cross referencing means that the few concepts that may not be familiar to the reader can be found in other chapters in the book. Audience: Research students, researchers and teachers in physics, physical chemistry, materials science, mechanical engineering and geometry.

Download or read book Intermolecular and Surface Forces written by Jacob N. Israelachvili and published by Academic Press. This book was released on 2011-07-22 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intermolecular and Surface Forces describes the role of various intermolecular and interparticle forces in determining the properties of simple systems such as gases, liquids and solids, with a special focus on more complex colloidal, polymeric and biological systems. The book provides a thorough foundation in theories and concepts of intermolecular forces, allowing researchers and students to recognize which forces are important in any particular system, as well as how to control these forces. This third edition is expanded into three sections and contains five new chapters over the previous edition. - Starts from the basics and builds up to more complex systems - Covers all aspects of intermolecular and interparticle forces both at the fundamental and applied levels - Multidisciplinary approach: bringing together and unifying phenomena from different fields - This new edition has an expanded Part III and new chapters on non-equilibrium (dynamic) interactions, and tribology (friction forces)

Download or read book Biological Soft Matter written by Corinne Nardin and published by John Wiley & Sons. This book was released on 2021-04-06 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biological Soft Matter Explore a comprehensive, one-stop reference on biological soft matter written and edited by leading voices in the field Biological Soft Matter: Fundamentals, Properties and Applications delivers a unique and indispensable compilation of up-to-date knowledge and material on biological soft matter. The book presents a thorough overview about biological soft matter, beginning with different substance classes, including proteins, nucleic acids, lipids, and polysaccharides. It goes on to describe a variety of superstructures and aggregated and how they are formed by self-assembly processes like protein folding or crystallization. The distinguished editors have included materials with a special emphasis on macromolecular assembly, including how it applies to lipid membranes, and proteins fibrillization. Biological Soft Matter is a crucial resource for anyone working in the field, compiling information about all important substance classes and their respective roles in forming superstructures. The book is ideal for beginners and experts alike and makes the perfect guide for chemists, physicists, and life scientists with an interest in the area. Readers will also benefit from the inclusion of: An introduction to DNA nano-engineering and DNA-driven nanoparticle assembly Explorations of polysaccharides and glycoproteins, engineered biopolymers, and engineered hydrogels Discussions of macromolecular assemblies, including liquid membranes and small molecule inhibitors for amyloid aggregation A treatment of inorganic nanomaterials as promoters and inhibitors of amyloid fibril formation An examination of a wide variety of natural and artificial polymers Perfect for materials scientists, biochemists, polymer chemists, and protein chemists, Biological Soft Matter: Fundamentals, Properties and Applications will also earn a place in the libraries of biophysicists and physical chemists seeking a one-stop reference summarizing the rapidly evolving topic of biological soft matter.

Download or read book Emulsion based Systems for Delivery of Food Active Compounds written by Shahin Roohinejad and published by John Wiley & Sons. This book was released on 2018-06-18 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive text that offers a review of the delivery of food active compounds through emulsion-based systems Emulsion-based Systems for Delivery of Food Active Compounds is a comprehensive recourse that reviews the principles of emulsion-based systems formation, examines their characterization and explores their effective application as carriers for delivery of food active ingredients. The text also includes information on emulsion-based systems in regards to digestibility and health and safety challenges for use in food systems. Each chapter reviews specific emulsion-based systems (Pickering, multiple, multilayered, solid lipid nanoparticles, nanostructured lipid carriers and more) and explains their application for delivery of food active compounds used in food systems. In addition, the authors – noted experts in the field – review the biological fate, bioavailability and the health and safety challenges of using emulsion-based systems as carriers for delivery of food active compounds in food systems. This important resource: Offers a comprehensive text that includes detailed coverage of emulsion-based systems for the delivery of food active compounds Presents the most recent development in emulsion-based systems that are among the most widely-used delivery systems developed to control the release of food active compounds Includes a guide for industrial applications for example food and drug delivery is a key concern for the food and pharmaceutical industries Emulsion-based Systems for Delivery of Food Active Compounds is designed for food scientists as well as those working in the food, nutraceutical and pharmaceutical and beverage industries. The text offers a comprehensive review of the essential elements of emulsion-based systems for delivery of food active compounds.

Download or read book The Mathematics of Physics and Chemistry written by Henry Margenau and published by . This book was released on 1956 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Particles Bubbles Drops written by Efstathios Michaelides and published by World Scientific. This book was released on 2006 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of multiphase flows has grown by leaps and bounds in the last thirty years and is now regarded as a major discipline. Engineering applications, products and processes with particles, bubbles and drops have consistently grown in number and importance. An increasing number of conferences, scientific fora and archived journals are dedicated to the dissemination of information on flow, heat and mass transfer of fluids with particles, bubbles and drops. Numerical computations and "thought experiments" have supplemented most physical experiments and a great deal of the product design and testing processes. The literature on computational fluid dynamics with particles, bubbles and drops has grown at an exponential rate, giving rise to new results, theories and better understanding of the transport processes with particles, bubbles and drops. This book captures and summarizes all these advances in a unified, succinct and pedagogical way. Contents: Fundamental Equations and Characteristics of Particles, Bubbles and Drops; Low Reynolds Number Flows; High Reynolds Number Flows; Non-Spherical Particles, Bubbles and Drops; Effects of Rotation, Shear and Boundaries; Effects of Turbulence; Electro-Kinetic, Thermo-Kinetic and Porosity Effects; Effects of Higher Concentration and Collisions; Molecular and Statistical Modeling; Numerical Methods-CFD. Key Features Summarizes the recent important results in the theory of transport processes of fluids with particles, bubbles and drops Presents the results in a unified and succinct way Contains more than 600 references where an interested reader may find details of the results Makes connections from all theories and results to physical and engineering applications Readership: Researchers, practicing engineers and physicists that deal with any aspects of Multiphase Flows. It will also be of interest to academics and researchers in the general fields of mechanical and chemical engineering.