Download or read book Powder Surface Area and Porosity written by S. Lowell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapid growth of interest in powders and their surface properties in many diverse industries prompted the writing of this book for those who have the need to make meaningful measurements without the benefit of years of experience. It is intended as an introduction to some of the elementary theory and experimental methods used to study the surface area, porosity and density of powders. It may be found useful by those with little or no training in solid surfaces who have the need to quickly learn the rudiments of surface area, density and pore-size measurements. Syosset, New York S. Lowell May, 1983 J. E. Shields Xl List of symbols Use of symbols for purposes other than those indicated in the following list are so defined in the text. Some symbols not shown in this list are defined in the text. d adsorbate cross-sectional area A area; condensation coefficient; collision frequency C BET constant c concentration D diameter; coefficient of thermal diffusion E adsorption potential f permeability aspect factor F flow rate; force; feed rate 9 gravitational constant G Gibbs free energy GS free surface energy h heat of immersion per unit area; height H enthalpy Hi heat of immersion Hsv heat of adsorption BET intercept; filament current k thermal conductivity; specific reaction rate K Harkins-Jura constant I length L heat of liquefaction M mass M molecular weight n number of moles N number of molecules; number of particles N Avagadro's number .

Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2024-07-15 with total page 501 pages. Available in PDF, EPUB and Kindle. Book excerpt: INTRODUCTION TO PARTICLE TECHNOLOGY A new edition of the indispensable guide to particulates and powders Particle technology concerns the formation, processing and properties of the particles and powders which make up many of the products that surround us. Such products range from the cement and aggregate in the built environment to pharmaceuticals and processed foods. Most of the process industries involve particles, either as essential components such as catalysts or as intermediate or final products, and minerals such as the rare earths that are generally mined and processed in particulate form. Particles can have many beneficial uses but they can also cause harm in the environment and, through inhalation, to the individual. In all cases, the powder properties, particularly particle size, are crucially important. This well-known textbook, now in its 3rd edition, provides an easily-understood introduction to the underlying scientific principles of particle technology, together with examples of how these principles can be used in practical design and operation of industrial processes. Each chapter contains both worked examples and exercises for the student. Based on feedback from students and users of the earlier editions, this revised and expanded text includes introductory chapters on particles as products and on computational methods. The topics have been selected to give coverage of the broad areas of particle technology and include: Characterization (size analysis, surface area) Processing (granulation, fluidization) Particle formation (granulation, crystallisation, tableting, size reduction) Storage and transport (hopper design, pneumatic conveying, standpipes) Separation (filtration, settling, cyclones) Safety (fire and explosion hazards, health hazards) Engineering the properties of particulate systems to achieve desired product performance Discrete element modelling of particulate systems Introduction to Particle Technology, 3rd Edition is essential reading for students of chemical engineering. The text is also recommended reading for students of mechanical engineering, applied chemistry, pharmaceutics, physics, mineral processing, and metallurgy, and is an excellent source for practising engineers and scientists looking to establish a working knowledge of the subject.

Download or read book Fundamentals of Particle Technology written by Richard Holdich and published by MidlandIT. This book was released on 2020-12-01 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Particle Technology is designed to assist the understanding of how particulate materials behave during processing and is written with engineers and scientists, who are new to the subject, in mind. It is accessible, in both cost and style, and is illustrated with numerous line diagrams. Most of the 16 chapters end with questions in multiple choice format. This helps problem decomposition and the reader can see each step required to arrive at an overall process solution. If the reader makes a mistake with any of the steps he, or she, usually does not see their answer and will immediately know where they have gone wrong. The aspects of Particle Technology covered include: particle characterisation, solid/liquid and solid/gas separations, fluidisation, flow of (and in) dispersions, powder mixing, storage, hazards, crushing and colloidal interaction. Extensive Internet support and referencing is provided. The teaching style adopted is the result of experience gained from presenting the subject for over 30 years at both undergraduate and postgraduate level.

Download or read book Chemical Engineering Volume 2 written by J H Harker and published by Elsevier. This book was released on 2013-10-22 with total page 1219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical Engineering Volume 2 covers the properties of particulate systems, including the character of individual particles and their behaviour in fluids. Sedimentation of particles, both singly and at high concentrations, flow in packed and fluidised beads and filtration are then examined. The latter part of the book deals with separation processes, such as distillation and gas absorption, which illustrate applications of the fundamental principles of mass transfer introduced in Chemical Engineering Volume 1. In conclusion, several techniques of growing importance - adsorption, ion exchange, chromatographic and membrane separations, and process intensification - are described. - A logical progression of chemical engineering concepts, volume 2 builds on fundamental principles contained in Chemical Engineering volume 1 and these volumes are fully cross-referenced - Reflects the growth in complexity and stature of chemical engineering over the last few years - Supported with further reading at the end of each chapter and graded problems at the end of the book

Download or read book Particle Size Measurements written by Henk G. Merkus and published by Springer Science & Business Media. This book was released on 2009-01-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the practical aspects of particle size measurement: a major difference with existing books, which have a more theoretical approach. Of course, the emphasis still lies on the measurement techniques. For optimum application, their theoretical background is accompanied by quantitative quality aspects, limitations and problem identification. In addition the book covers the phenomena of sampling and dispersion of powders, either of which may be dominant in the overall analysis error. Moreover, there are chapters on the general aspects of quality for particle size analysis, quality management, reference materials and written standards, in- and on-line measurement, definitions and multilingual terminology, and on the statistics required for adequate interpretation of results. Importantly, a relation is made to product performance, both during processing as well as in final application. In view of its set-up, this book is well suited to support particle size measurement courses.

Download or read book Particle Breakage written by Agba D. Salman and published by Elsevier. This book was released on 2007-11-01 with total page 1241 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle breakage is an important process within a wide range of solids processing industries, including pharmaceuticals, food, agricultural and mining. Breakage of particles can be defined as intentional and unintentional, depending on whether it is desired or not. Through understanding of the science and underlying mechanisms behind this phenomenon, particle breakage can be either minimised or encouraged within an efficient and effective process. Particle Breakage examines particle breakage at three different length scales, ranging from single particle studies through groups of particles and looking at solid processing steps as a whole. This book is the widest ranging book in the field and includes the most up-to-date techniques such as Distinct Element Method (DEM), Monte Carlo simulations and Population Balance Equations (PBE). This handbook provides an overview of the current state-of-the- art and particle breakage. From the small scale of a single particle, to the study of whole processes for breakage; both by experimental study and mathematical modelling.* Covering a wide range of subjects and industrial applications* Allows the reader an understanding of the science behind engineered breakage processes* Giving an unrestrictive and interdisciplinary approach

Download or read book Particle Technology and Textiles written by Jean Cornier and published by Walter de Gruyter GmbH & Co KG. This book was released on 2023-05-22 with total page 427 pages. Available in PDF, EPUB and Kindle. Book excerpt: Functionalization of material systems is one of the key developments nowadays in the textile industry, where particles are frequently used to enhance the properties of fibers and to add new functionalities. This book focuses on innovative textile materials and is a perfect guide for professionals in the textile industry and scientists alike. An overview of particle technology is provided before addressing all topics relevant to particle-enhanced textiles, i.e. the properties and application of micro/nanoparticles in textiles, production techniques, safety, as well as regulatory and intellectual property aspects. The book covers the composition and applications of various types of textile fillers, finishings, and microfibers. gives an outlook on future trends and challenges in the research, development, and production of nano- and micro-enabled textiles. The authors of the book, who are leading experts in their fields, address many aspects relevant to the use of particle-enhanced textiles in industrial applications as well as in our daily life. A particular emphasis is put on practical examples of applications and products, safety and sustainability issues and the potential for further innovation. This book should bring inspiration for textile scientists in using particles for improving textiles and further expanding their possibilities of use.

Download or read book Particle Characterization Light Scattering Methods written by Renliang Xu and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle characterization is an important component in product research and development, manufacture, and quality control of particulate materials and an important tool in the frontier of sciences, such as in biotechnology and nanotechnology. This book systematically describes one major branch of modern particle characterization technology - the light scattering methods. This is the first monograph in particle science and technology covering the principles, instrumentation, data interpretation, applications, and latest experimental development in laser diffraction, optical particle counting, photon correlation spectroscopy, and electrophoretic light scattering. In addition, a summary of all major particle sizing and other characterization methods, basic statistics and sample preparation techniques used in particle characterization, as well as almost 500 latest references are provided. The book is a must for industrial users of light scattering techniques characterizing a variety of particulate systems and for undergraduate or graduate students who want to learn how to use light scattering to study particular materials, in chemical engineering, material sciences, physical chemistry and other related fields.

Download or read book Instrumentation for Fluid Particle Flow written by S.L. Soo and published by Elsevier. This book was released on 1999-10-01 with total page 431 pages. Available in PDF, EPUB and Kindle. Book excerpt: Some of the most original and productive research specialists in the field of particle-fluid flow systems are assembled in this book, which is an important and current reference volume. The book focuses on methods of measurement and options for engineers

Download or read book Particle Therapy Technology for Safe Treatment written by Jay Flanz and published by CRC Press. This book was released on 2022-01-18 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: The path from clinical requirements to technical implementation is filtered by the translation of the modality to the technology. An important part of that filter is that the modality be safe. For that to be the case, it is imperative to understand what clinical parameters affect the safety of a treatment and then determine how the technology can affect those parameters. This book provides a practical introduction to particle therapy. It provides a thorough introduction to the technological tools and their applications and then details the components that are needed to implement them. It explains the foundations of beam production and beam delivery that serve to meet the necessary clinical requirements. It emphasizes the relationship between requirements and implementation, including how safety and quality are considered and implemented in the solution. The reader will learn to better understand what parameters are important to achieve these goals. Particle Therapy Technology for Safe Treatment will be a useful resource for professionals in the field of particle therapy in addition to biomedical engineers and practitioners in the field of beam physics. It can also be used as a textbook for graduate medical physics and beam physics courses. Key Features Presents a practical and accessible journey from application requirements to technical solutions Provides a pedagogic treatment of the underlying technology Describes how safety is to be considered in the application of this technology and how safety and quality can be factored into the overall system Author Bio After receiving his PhD in nuclear physics, Dr. Jacob Flanz was the Accelerator Physics Group leader and Principal Research Scientist at the Massachusetts Institute of Technology (MIT), USA, where he designed the recirculator and the GeV stretcher/storage ring. He joined Massachusetts General Hospital (MGH) and Harvard and became project and technical director of proton therapy, with responsibility for specifications, integration, and commissioning ensuring safe clinical performance. He invented the universal nozzle and led the design and implementation of beam scanning at MGH in 2008, including quality assurance. Dr. Flanz has been involved in several FDA applications for particle therapy. He developed and taught the US Particle Accelerator School course "Medical Applications of Accelerators and Beams." He was cochair of education and is currently the president of the Particle Therapy Co-Operative Group. Exercise solutions to accompany this book can be accessed via the 'Instructor Resources' tab on the book webpage.

Download or read book Particle Technology and Applications written by Sunggyu Lee and published by CRC Press. This book was released on 2016-04-19 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle Technology and Applications presents the theoretical and technological background of particle science and explores up-to-date applications of particle technologies in the chemical, petrochemical, energy, mechanical, and materials industries. It looks at the importance of particle science and technology in the development of efficient chemi

Download or read book Handbook of Fluidization and Fluid Particle Systems written by Wen-Ching Yang and published by CRC Press. This book was released on 2003-03-19 with total page 876 pages. Available in PDF, EPUB and Kindle. Book excerpt: This reference details particle characterization, dynamics, manufacturing, handling, and processing for the employment of multiphase reactors, as well as procedures in reactor scale-up and design for applications in the chemical, mineral, petroleum, power, cement and pharmaceuticals industries. The authors discuss flow through fixed beds, elutriation and entrainment, gas distributor and plenum design in fluidized beds, effect of internal tubes and baffles, general approaches to reactor design, applications for gasifiers and combustors, dilute phase pneumatic conveying, and applications for chemical production and processing. This is a valuable guide for chemists and engineers to use in their day-to-day work.

Download or read book Particle Size Analysis written by I. Claus Bernhardt and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: teacher Professor Ernst-Joachim Ivers to whom I still owe many insights 20 years after the end of his working life. This English edition is not an unedited translation of the German edition of 1990. The text has been substantially revised in some chapters, taking into account the literature published in the mean time. I wish to thank Dr.-Ing. H. Finken, Freiberg, who has prepared the translation from German into English with deep scientific understanding and in close contact with the author. I also wish to express my gratitude to Chapman & Hall for their support to this project without which the English edition could not have been published. Dr.-Ing. habil. C. Bernhardt Freiberg 1 Position, tasks and structure of particle size analysis Today the concept of particle size analysis is that of a special field of particle measurement technology, which in turn is part of particulate technology. This classification has developed over the last 20 years; it is the result of a scientific integration process taking place in many industrialized countries of the world. In recent years, the meaning and mutual connection of the related concepts as well as the tasks of the scientific disciplines designated by them have been the subject of intensive discussion which, however, has not led to a generally accepted terminology.

Download or read book Current Awareness in Particle Technology written by and published by . This book was released on 1989 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Functional Gradient Materials and Surface Layers Prepared by Fine Particles Technology written by Marie-Isabelle Baraton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: The NATO Advanced Study Institute on "Functional Gradient Materials and Surface Layers Prepared by Fine Particles Technology" was held in Kiev (Ukraine) on June 18- 28, 2000 where more than 90 participants, ranging from Ph.D. students to experienced senior scientists, met and exchanged ideas. This meeting was aimed at stimulating the research work across traditional disciplinary lines by bringing together scientists from diverse research areas related to functional gradient materials and surface layers. It also intended to give opportunities for initiating collaborative works between scientists from NATO and Partner countries and to trigger fruitful and exciting discussions between experienced and young researchers. In this respect, this NATO-ASI has been quite successful. The term of functional gradient materials which originates from Japan in the 1980's describes a class of engineering materials with spatially inhomogeneous microstructures and properties (MRS Bulletin, 1995,20, N°l). These materials can be successfully utilized in various applications like electronic devices, optical films, anti wear and anti-corrosion coatings, thermal barrier coatings, biomaterials, to name only a few. Although these functional gradient materials are not fundamentally new, the use of nanoparticles in their fabrication and in surface layers as well has greatly improved their performances to meet challenging requirements for industrial applications.

Download or read book Introduction to Particle Technology written by Martin J. Rhodes and published by John Wiley & Sons. This book was released on 2013-03-25 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle technology is a term used to refer to the science and technology related to the handling and processing of particles and powders. The production of particulate materials, with controlled properties tailored to subsequent processing and applications, is of major interest to a wide range of industries, including chemical and process, food, pharmaceuticals, minerals and metals companies and the handling of particles in gas and liquid solutions is a key technological step in chemical engineering. This textbook provides an excellent introduction to particle technology with worked examples and exercises. Based on feedback from students and practitioners worldwide, it has been newly edited and contains new chapters on slurry transport, colloids and fine particles, size enlargement and the health effects of fine powders. Topics covered include: Characterization (Size Analysis) Processing (Granulation, Fluidization) Particle Formation (Granulation, Size Reduction) Storage and Transport (Hopper Design, Pneumatic Conveying, Standpipes, Slurry Flow) Separation (Filtration, Settling, Cyclones) Safety (Fire and Explosion Hazards, Health Hazards) Engineering the Properties of Particulate Systems (Colloids, Respirable Drugs, Slurry Rheology) This book is essential reading for undergraduate students of chemical engineering on particle technology courses. It is also valuable supplementary reading for students in other branches of engineering, applied chemistry, physics, pharmaceutics, mineral processing and metallurgy. Practitioners in industries in which powders are handled and processed may find it a useful starting point for gaining an understanding of the behavior of particles and powders. Review of the First Edition taken from High Temperatures - High pressures 1999 31 243 – 251 "..This is a modern textbook that presents clear-cut knowledge. It can be successfully used both for teaching particle technology at universities and for individual study of engineering problems in powder processing."

Download or read book Powder Sampling and Particle Size Determination written by T. Allen and published by Elsevier. This book was released on 2003-12-09 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powder technology is a rapidly expanding technology and nowhere more than in particle characterization. There has been an explosion of new particle measuring techniques in the past ten year particularly in the field of on-line measurement. One of the main aims of this book is to bring the reader up-to-date with current practices. One important area of interest is the improvements in on-line light scattering instruments and the introduction of ultrasonic on-line devices. Another is the introduction of on-line microscopy, which permits shape analysis in conjunction with particle sizing.Schools of powder technology are common in Europe and Japan but the importance of this subject has only recently been recognised in America with the emergence of the Particle Research Centre (PERC) at the University of Florida in Gainsville.- Details all the latest developments in powder technology - Written by established authority on powder technology- A comprehensive text covering all aspects of powder technology and handling of particulate solids including characterization, handling and applications