Download or read book Particle Size Measurements written by Henk G. Merkus and published by Springer Science & Business Media. This book was released on 2009-01-07 with total page 535 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the practical aspects of particle size measurement: a major difference with existing books, which have a more theoretical approach. Of course, the emphasis still lies on the measurement techniques. For optimum application, their theoretical background is accompanied by quantitative quality aspects, limitations and problem identification. In addition the book covers the phenomena of sampling and dispersion of powders, either of which may be dominant in the overall analysis error. Moreover, there are chapters on the general aspects of quality for particle size analysis, quality management, reference materials and written standards, in- and on-line measurement, definitions and multilingual terminology, and on the statistics required for adequate interpretation of results. Importantly, a relation is made to product performance, both during processing as well as in final application. In view of its set-up, this book is well suited to support particle size measurement courses.
Download or read book Particle Size Analysis Laser Diffraction Methods written by and published by . This book was released on 1999 with total page 50 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Particle Characterization Light Scattering Methods written by Renliang Xu and published by Springer Science & Business Media. This book was released on 2006-04-11 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: Particle characterization is an important component in product research and development, manufacture, and quality control of particulate materials and an important tool in the frontier of sciences, such as in biotechnology and nanotechnology. This book systematically describes one major branch of modern particle characterization technology - the light scattering methods. This is the first monograph in particle science and technology covering the principles, instrumentation, data interpretation, applications, and latest experimental development in laser diffraction, optical particle counting, photon correlation spectroscopy, and electrophoretic light scattering. In addition, a summary of all major particle sizing and other characterization methods, basic statistics and sample preparation techniques used in particle characterization, as well as almost 500 latest references are provided. The book is a must for industrial users of light scattering techniques characterizing a variety of particulate systems and for undergraduate or graduate students who want to learn how to use light scattering to study particular materials, in chemical engineering, material sciences, physical chemistry and other related fields.
Download or read book Experimental Methods and Instrumentation for Chemical Engineers written by Gregory S. Patience and published by Elsevier. This book was released on 2017-09-08 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Experimental Methods and Instrumentation for Chemical Engineers, Second Edition, touches many aspects of engineering practice, research, and statistics. The principles of unit operations, transport phenomena, and plant design constitute the focus of chemical engineering in the latter years of the curricula. Experimental methods and instrumentation is the precursor to these subjects. This resource integrates these concepts with statistics and uncertainty analysis to define what is necessary to measure and to control, how precisely and how often.The completely updated second edition is divided into several themes related to data: metrology, notions of statistics, and design of experiments. The book then covers basic principles of sensing devices, with a brand new chapter covering force and mass, followed by pressure, temperature, flow rate, and physico-chemical properties. It continues with chapters that describe how to measure gas and liquid concentrations, how to characterize solids, and finally a new chapter on spectroscopic techniques such as UV/Vis, IR, XRD, XPS, NMR, and XAS. Throughout the book, the author integrates the concepts of uncertainty, along with a historical context and practical examples.A problem solutions manual is available from the author upon request. - Includes the basics for 1st and 2nd year chemical engineers, providing a foundation for unit operations and transport phenomena - Features many practical examples - Offers exercises for students at the end of each chapter - Includes up-to-date detailed drawings and photos of equipment
Download or read book Solid State Development and Processing of Pharmaceutical Molecules written by Michael Gruss and published by John Wiley & Sons. This book was released on 2021-11-15 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solid State Development and Processing of Pharmaceutical Molecules A guide to the lastest industry principles for optimizing the production of solid state active pharmaceutical ingredients Solid State Development and Processing of Pharmaceutical Molecules is an authoritative guide that covers the entire pharmaceutical value chain. The authors—noted experts on the topic—examine the importance of the solid state form of chemical and biological drugs and review the development, production, quality control, formulation, and stability of medicines. The book explores the most recent trends in the digitization and automation of the pharmaceutical production processes that reflect the need for consistent high quality. It also includes information on relevant regulatory and intellectual property considerations. This resource is aimed at professionals in the pharmaceutical industry and offers an in-depth examination of the commercially relevant issues facing developers, producers and distributors of drug substances. This important book: Provides a guide for the effective development of solid drug forms Compares different characterization methods for solid state APIs Offers a resource for understanding efficient production methods for solid state forms of chemical and biological drugs Includes information on automation, process control, and machine learning as an integral part of the development and production workflows Covers in detail the regulatory and quality control aspects of drug development Written for medicinal chemists, pharmaceutical industry professionals, pharma engineers, solid state chemists, chemical engineers, Solid State Development and Processing of Pharmaceutical Molecules reviews information on the solid state of active pharmaceutical ingredients for their efficient development and production.
Download or read book Practical Approaches to Method Validation and Essential Instrument Qualification written by Chung Chow Chan and published by John Wiley & Sons. This book was released on 2011-03-01 with total page 363 pages. Available in PDF, EPUB and Kindle. Book excerpt: Practical approaches to ensure that analytical methods and instruments meet GMP standards and requirements Complementing the authors' first book, Analytical Method Validation and Instrument Performance Verification, this new volume provides coverage of more advanced topics, focusing on additional and supplemental methods, instruments, and electronic systems that are used in pharmaceutical, biopharmaceutical, and clinical testing. Readers will gain new and valuable insights that enable them to avoid common pitfalls in order to seamlessly conduct analytical method validation as well as instrument operation qualification and performance verification. Part 1, Method Validation, begins with an overview of the book's risk-based approach to phase appropriate validation and instrument qualification; it then focuses on the strategies and requirements for early phase drug development, including validation of specific techniques and functions such as process analytical technology, cleaning validation, and validation of laboratory information management systems Part 2, Instrument Performance Verification, explores the underlying principles and techniques for verifying instrument performance—coverage includes analytical instruments that are increasingly important to the pharmaceutical industry, such as NIR spectrometers and particle size analyzers—and offers readers a variety of alternative approaches for the successful verification of instrument performance based on the needs of their labs At the end of each chapter, the authors examine important practical problems and share their solutions. All the methods covered in this book follow Good Analytical Practices (GAP) to ensure that reliable data are generated in compliance with current Good Manufacturing Practices (cGMP). Analysts, scientists, engineers, technologists, and technical managers should turn to this book to ensure that analytical methods and instruments are accurate and meet GMP standards and requirements.
Download or read book The Cold Spray Materials Deposition Process written by and published by Elsevier. This book was released on 2007-09-21 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: The cold spray process produces dense, low oxide coatings which can be used in such diverse applications as corrosion control and metals repair. It has emerged as an important alternative to thermal spray coating techniques in certain areas. This pioneering book reviews both the fundamentals of the process and how it can best be applied in practice. The first part of the book discusses the development of the process together with its advantages and disadvantages in comparison with thermal spray coating techniques. Part two reviews key process parameters such as powders, nozzle design, particle temperature and velocity, and particle/substrate interaction. It also describes portable and stationary cold spray systems. The final part of the book discusses how the cold spray process can be applied in such areas as improved wear, corrosion protection, electromagnetic interference shielding and repair of damaged components. The cold spray materials deposition process is a standard reference on this important process and its industrial applications. Examines the fundamentals of the cold spraying process Assesses how the technique can best be applied in practice Describes portable and stationary cold spray systems
Download or read book Dynamic Image Analysis of Granular Materials written by Magued Iskander and published by Springer Nature. This book was released on with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Sea Level Research written by Ian Shennan and published by John Wiley & Sons. This book was released on 2015-05-04 with total page 631 pages. Available in PDF, EPUB and Kindle. Book excerpt: Measuring sea-level change – be that rise or fall – is one of the most pressing scientific goals of our time and requires robust scientific approaches and techniques. This Handbook aims to provide a practical guide to readers interested in this challenge, from the initial design of research approaches through to the practical issues of data collection and interpretation from a diverse range of coastal environments. Building on thirty years of international research, the Handbook comprises 38 chapters that are authored by leading experts from around the world. The Handbook will be an important resource to scientists interested and involved in understanding sea-level changes across a broad range of disciplines, policy makers wanting to appreciate our current state of knowledge of sea-level change over different timescales, and many teachers at the university level, as well as advanced-level undergraduates and postgraduate research students, wanting to learn more about sea-level change. Additional resources for this book can be found at: www.wiley.com\go\shennan\sealevel
Download or read book Pollution Control Technologies Volume I written by Bhaskar Nath and published by EOLSS Publications. This book was released on 2009-09-30 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pollution Control Technologies is a component of Encyclopedia of Environmental and Ecological Sciences, Engineering and Technology Resources in the global Encyclopedia of Life Support Systems (EOLSS), which is an integrated compendium of twenty one Encyclopedias. The volume on Pollution Control Technologies focuses largely concerned with strategies for pollution reduction, and pollution prevention if at all possible, using scientific and technological methods. Focusing primarily but not exclusively on air pollution, the Theme is written in simple English, avoiding both mathematical and chemical equations as far as possible to facilitate effective and widest possible dissemination. The content of the Theme provides the essential aspects and a myriad of issues of great relevance to our world such as: Control of Particulate Matter in Gaseous Emissions; Control of Gaseous Emissions; Pollution Control through Efficient Combustion Technology; Pollution Control in Industrial Processes; Pollution Control in Transportation, which are then expanded into multiple subtopics, each as a chapter. These three volumes are aimed at the following five major target audiences: University and College students Educators, Professional practitioners, Research personnel and Policy analysts, managers, and decision makers and NGOs
Download or read book Characterization of Pharmaceutical Nano and Microsystems written by Leena Peltonen and published by John Wiley & Sons. This book was released on 2020-12-21 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn about the analytical tools used to characterize particulate drug delivery systems with this comprehensive overview Edited by a leading expert in the field, Characterization of Pharmaceutical Nano- and Microsystems provides a complete description of the analytical techniques used to characterize particulate drug systems on the micro- and nanoscale. The book offers readers a full understanding of the basic physicochemical characteristics, material properties and differences between micro- and nanosystems. It explains how and why greater experience and more reliable measurement techniques are required as particle size shrinks, and the measured phenomena grow weaker. Characterization of Pharmaceutical Nano- and Microsystems deals with a wide variety of topics relevant to chemical and solid-state analysis of drug delivery systems, including drug release, permeation, cell interaction, and safety. It is a complete resource for those interested in the development and manufacture of new medicines, the drug development process, and the translation of those drugs into life-enriching and lifesaving medicines. Characterization of Pharmaceutical Nano- and Microsystems covers all of the following topics: An introduction to the analytical tools applied to determine particle size, morphology, and shape Common chemical approaches to drug system characterization A description of solid-state characterization of drug systems Drug release and permeation studies Toxicity and safety issues The interaction of drug particles with cells Perfect for pharmaceutical chemists and engineers, as well as all other industry professionals and researchers who deal with drug delivery systems on a regular basis, Characterization of Pharmaceutical Nano- and Microsystems also belongs on bookshelves of interested students and faculty who interact with this topic.
Download or read book Production Handling and Characterization of Particulate Materials written by Henk G. Merkus and published by Springer. This book was released on 2015-11-26 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents most techniques and methods that have been developed by material scientists, chemists, chemical engineers and physicists for the commercial production of particulate materials, ranging from the millimeter to the nanometer scale. The scope includes the physical and chemical background, experimental optimization of equipment and procedures, as well as an outlook on future methods. The books addresses issues of industrial importance such as specifications, control parameter(s), control strategy, process models, energy consumption and discusses the various techniques in relation to potential applications. In addition to the production processes, all major unit operations and characterization methods are described in this book. It differs from other books which are devoted to a single technique or a single material. Contributors to this book are acknowledged experts in their field. The aim of the book is to facilitate comparison of the different unit operations leading to optimum equipment choices for the production, handling and storage of particulate materials. An advantage of this approach is that unit operations that are common in one field of application are made accessible to other fields. The overall focus is on industrial application and the book includes some concrete examples. The book is an essential resource for students or researchers who work in collaboration with manufacturing industries or who are planning to make the switch from academia to industry.
Download or read book Computational Nanotoxicology written by Agnieszka Gajewicz and published by CRC Press. This book was released on 2019-11-13 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of computational methods that support human health and environmental risk assessment of engineered nanomaterials has attracted great interest because the application of these methods enables us to fill existing experimental data gaps. However, considering the high degree of complexity and multifunctionality of engineered nanoparticles, computational methods originally developed for regular (i.e., classic) chemicals cannot always be applied explicitly in nanotoxicology. Thus, the main idea of this book is to discuss the current state of the art and future needs in the development of computational modeling techniques for nanotoxicology. The book focuses on methodology. Among various in silico techniques, special attention is given to (i) computational chemistry (quantum mechanics, semi-empirical methods, density functional theory, molecular mechanics, molecular dynamics); (ii) nanochemoinformatic methods (quantitative structure–activity relationship modeling, grouping, read-across); and (iii) nanobioinformatic methods (genomics, transcriptomics, proteomics, metabolomics).
Download or read book Nondestructive Testing of Food Quality written by Joseph Irudayaraj and published by John Wiley & Sons. This book was released on 2008-06-02 with total page 382 pages. Available in PDF, EPUB and Kindle. Book excerpt: The expert contributors to Nondestructive Testing of Food Quality clearly explain present industry advances and how to turn available instrumentation into valuable assets. Readers learn how the competencies of product knowledge, process understanding, instrumentation, principles of sensing, process control, and analytical methodology are required to turn an application into success. The broad-based coverage of topics addresses the most dominant sensor technologies keeping in mind the research initiatives advancing these technologies not only in food but also in the pharmaceutical sectors. Coverage includes: ultrasound, near infrared spectroscopy, mid-infrared spectroscopy, Raman spectroscopy, hyperspectral imaging systems, magnetic resonance imaging, electronic nose, z-nose, biosensors, microwave absorption, and nanoparticles and colloids as sensors.
Download or read book Soil Mechanics written by William Powrie and published by CRC Press. This book was released on 2018-10-08 with total page 676 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instead of fixating on formulae, Soil Mechanics: Concepts and Applications, Third Edition focuses on the fundamentals. This book describes the mechanical behaviour of soils as it relates to the practice of geotechnical engineering. It covers both principles and design, avoids complex mathematics whenever possible, and uses simple methods and ideas to build a framework to support and accommodate more complex problems and analysis. The third edition includes new material on site investigation, stress-dilatancy, cyclic loading, non-linear soil behaviour, unsaturated soils, pile stabilization of slopes, soil/wall stiffness and shallow foundations. Other key features of the Third Edition: • Makes extensive reference to real case studies to illustrate the concepts described • Focuses on modern soil mechanics principles, informed by relevant research • Presents more than 60 worked examples • Provides learning objectives, key points, and self-assessment and learning questions for each chapter • Includes an accompanying solutions manual for lecturers This book serves as a resource for undergraduates in civil engineering and as a reference for practising geotechnical engineers.
Download or read book Nanoscale Fabrication Optimization Scale up and Biological Aspects of Pharmaceutical Nanotechnology written by Alexandru Mihai Grumezescu and published by William Andrew. This book was released on 2017-12-11 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nanoscale Fabrication, Optimization, Scale-up and Biological Aspects of Pharmaceutical Nanotechnology focuses on the fabrication, optimization, scale-up and biological aspects of pharmaceutical nanotechnology. In particular, the following aspects of nanoparticle preparation methods are discussed: the need for less toxic reagents, simplification of the procedure to allow economic scale-up, and optimization to improve yield and entrapment efficiency. Written by a diverse range of international researchers, the chapters examine characterization and manufacturing of nanomaterials for pharmaceutical applications. Regulatory and policy aspects are also discussed. This book is a valuable reference resource for researchers in both academia and the pharmaceutical industry who want to learn more about how nanomaterials can best be utilized. - Shows how nanomanufacturing techniques can help to create more effective, cheaper pharmaceutical products - Explores how nanofabrication techniques developed in the lab have been translated to commercial applications in recent years - Explains safety and regulatory aspects of the use of nanomanufacturing processes in the pharmaceutical industry
Download or read book Particles and Nanoparticles in Pharmaceutical Products written by Henk G. Merkus and published by Springer. This book was released on 2018-09-06 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume brings together the expertise of numerous specialists on the topic of particles – their physical, chemical, pharmacological and toxicological characteristics – when they are a component of pharmaceutical products and formulations. The book discusses in detail properties such as the composition, size, shape, surface properties and porosity of particles with respect to how they impact the formulations and products in which they are used and the effective delivery of pharmaceutical active ingredients. It considers all dosage forms of pharmaceuticals involving particles, from powders to tablets, creams to ointments, and solutions to dry-powder inhalers, also including the latest nanomedicine products. Further, it discusses examples of particle toxicity, as well as the important subject of pharmaceutical industry regulations, guidelines and legislation. The book is of interest to researchers and practitioners who work on testing and developing pharmaceutical dosage and delivery systems.
