Download or read book Parallel and Distributed Simulation Systems written by Richard M. Fujimoto and published by Wiley-Interscience. This book was released on 2000-01-03 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the preface, page xv: [...] My goal in writing Parallel and Distributed Simulation Systems, is to give an in-depth treatment of technical issues concerning the execution of discrete event simulation programs on computing platforms composed of many processores interconnected through a network"
Download or read book Task Scheduling for Parallel Systems written by Oliver Sinnen and published by John Wiley & Sons. This book was released on 2007-05-18 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: A new model for task scheduling that dramatically improves the efficiency of parallel systems Task scheduling for parallel systems can become a quagmire of heuristics, models, and methods that have been developed over the past decades. The author of this innovative text cuts through the confusion and complexity by presenting a consistent and comprehensive theoretical framework along with realistic parallel system models. These new models, based on an investigation of the concepts and principles underlying task scheduling, take into account heterogeneity, contention for communication resources, and the involvement of the processor in communications. For readers who may be new to task scheduling, the first chapters are essential. They serve as an excellent introduction to programming parallel systems, and they place task scheduling within the context of the program parallelization process. The author then reviews the basics of graph theory, discussing the major graph models used to represent parallel programs. Next, the author introduces his task scheduling framework. He carefully explains the theoretical background of this framework and provides several examples to enable readers to fully understand how it greatly simplifies and, at the same time, enhances the ability to schedule. The second half of the text examines both basic and advanced scheduling techniques, offering readers a thorough understanding of the principles underlying scheduling algorithms. The final two chapters address communication contention in scheduling and processor involvement in communications. Each chapter features exercises that help readers put their new skills into practice. An extensive bibliography leads to additional information for further research. Finally, the use of figures and examples helps readers better visualize and understand complex concepts and processes. Researchers and students in distributed and parallel computer systems will find that this text dramatically improves their ability to schedule tasks accurately and efficiently.
Download or read book Compiler Optimizations for Scalable Parallel Systems written by Santosh Pande and published by Springer Science & Business Media. This book was released on 2001-04-18 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scalable parallel systems or, more generally, distributed memory systems offer a challenging model of computing and pose fascinating problems regarding compiler optimization, ranging from language design to run time systems. Research in this area is foundational to many challenges from memory hierarchy optimizations to communication optimization. This unique, handbook-like monograph assesses the state of the art in the area in a systematic and comprehensive way. The 21 coherent chapters by leading researchers provide complete and competent coverage of all relevant aspects of compiler optimization for scalable parallel systems. The book is divided into five parts on languages, analysis, communication optimizations, code generation, and run time systems. This book will serve as a landmark source for education, information, and reference to students, practitioners, professionals, and researchers interested in updating their knowledge about or active in parallel computing.
Download or read book Parallel Programming written by Thomas Rauber and published by Springer Science & Business Media. This book was released on 2010-03-10 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in hardware architecture, like hyper-threading or multicore processors, mean that parallel computing resources are available for inexpensive desktop computers. In only a few years, many standard software products will be based on concepts of parallel programming implemented on such hardware, and the range of applications will be much broader than that of scientific computing, up to now the main application area for parallel computing. Rauber and Rünger take up these recent developments in processor architecture by giving detailed descriptions of parallel programming techniques that are necessary for developing efficient programs for multicore processors as well as for parallel cluster systems and supercomputers. Their book is structured in three main parts, covering all areas of parallel computing: the architecture of parallel systems, parallel programming models and environments, and the implementation of efficient application algorithms. The emphasis lies on parallel programming techniques needed for different architectures. The main goal of the book is to present parallel programming techniques that can be used in many situations for many application areas and which enable the reader to develop correct and efficient parallel programs. Many examples and exercises are provided to show how to apply the techniques. The book can be used as both a textbook for students and a reference book for professionals. The presented material has been used for courses in parallel programming at different universities for many years.
Download or read book Distributed and Parallel Systems written by Peter Kacsuk and published by Springer Science & Business Media. This book was released on 2007-05-03 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed and Parallel Systems: From Cluster to Grid Computing, is an edited volume based on DAPSYS 2006, the 6th Austrian-Hungarian Workshop on Distributed and Parallel Systems, which is dedicated to all aspects of distributed and parallel computing. The workshop was held in conjunction with the 2nd Austrian Grid Symposium in Innsbruck, Austria in September 2006. This book is designed for a professional audience composed of practitioners and researchers in industry. It is also suitable for advanced-level students in computer science.
Download or read book Parallel Processing from Applications to Systems written by Dan I. Moldovan and published by Elsevier. This book was released on 2014-06-28 with total page 586 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides one of the broadest presentations of parallel processing available, including the structure of parallelprocessors and parallel algorithms. The emphasis is on mapping algorithms to highly parallel computers, with extensive coverage of array and multiprocessor architectures. Early chapters provide insightful coverage on the analysis of parallel algorithms and program transformations, effectively integrating a variety of material previously scattered throughout the literature. Theory and practice are well balanced across diverse topics in this concise presentation. For exceptional clarity and comprehension, the author presents complex material in geometric graphs as well as algebraic notation. Each chapter includes well-chosen examples, tables summarizing related key concepts and definitions, and a broad range of worked exercises. - Overview of common hardware and theoretical models, including algorithm characteristics and impediments to fast performance - Analysis of data dependencies and inherent parallelism through program examples, building from simple to complex - Graphic and explanatory coverage of program transformations - Easy-to-follow presentation of parallel processor structures and interconnection networks, including parallelizing and restructuring compilers - Parallel synchronization methods and types of parallel operating systems - Detailed descriptions of hypercube systems - Specialized chapters on dataflow and on AI architectures
Download or read book Parallel Programming written by Thomas Rauber and published by Springer Science & Business Media. This book was released on 2013-06-13 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovations in hardware architecture, like hyper-threading or multicore processors, mean that parallel computing resources are available for inexpensive desktop computers. In only a few years, many standard software products will be based on concepts of parallel programming implemented on such hardware, and the range of applications will be much broader than that of scientific computing, up to now the main application area for parallel computing. Rauber and Rünger take up these recent developments in processor architecture by giving detailed descriptions of parallel programming techniques that are necessary for developing efficient programs for multicore processors as well as for parallel cluster systems and supercomputers. Their book is structured in three main parts, covering all areas of parallel computing: the architecture of parallel systems, parallel programming models and environments, and the implementation of efficient application algorithms. The emphasis lies on parallel programming techniques needed for different architectures. For this second edition, all chapters have been carefully revised. The chapter on architecture of parallel systems has been updated considerably, with a greater emphasis on the architecture of multicore systems and adding new material on the latest developments in computer architecture. Lastly, a completely new chapter on general-purpose GPUs and the corresponding programming techniques has been added. The main goal of the book is to present parallel programming techniques that can be used in many situations for a broad range of application areas and which enable the reader to develop correct and efficient parallel programs. Many examples and exercises are provided to show how to apply the techniques. The book can be used as both a textbook for students and a reference book for professionals. The material presented has been used for courses in parallel programming at different universities for many years.
Download or read book Parallel System Interconnections and Communications written by Miltos D. Grammatikakis and published by CRC Press. This book was released on 2018-10-08 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction to networking large scale parallel computer systems acts as a primary resource for a wide readership, including network systems engineers, electronics engineers, systems designers, computer scientists involved in systems design and implementation of parallel algorithms development, graduate students in systems architecture, design, or engineering.
Download or read book Performance Evaluation Prediction and Visualization of Parallel Systems written by Xingfu Wu and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Performance Evaluation, Prediction and Visualization in Parallel Systems presents a comprehensive and systematic discussion of theoretics, methods, techniques and tools for performance evaluation, prediction and visualization of parallel systems. Chapter 1 gives a short overview of performance degradation of parallel systems, and presents a general discussion on the importance of performance evaluation, prediction and visualization of parallel systems. Chapter 2 analyzes and defines several kinds of serial and parallel runtime, points out some of the weaknesses of parallel speedup metrics, and discusses how to improve and generalize them. Chapter 3 describes formal definitions of scalability, addresses the basic metrics affecting the scalability of parallel systems, discusses scalability of parallel systems from three aspects: parallel architecture, parallel algorithm and parallel algorithm-architecture combinations, and analyzes the relations of scalability and speedup. Chapter 4 discusses the methodology of performance measurement, describes the benchmark- oriented performance test and analysis and how to measure speedup and scalability in practice. Chapter 5 analyzes the difficulties in performance prediction, discusses application-oriented and architecture-oriented performance prediction and how to predict speedup and scalability in practice. Chapter 6 discusses performance visualization techniques and tools for parallel systems from three stages: performance data collection, performance data filtering and performance data visualization, and classifies the existing performance visualization tools. Chapter 7 describes parallel compiling-based, search-based and knowledge-based performance debugging, which assists programmers to optimize the strategy or algorithm in their parallel programs, and presents visual programming-based performance debugging to help programmers identify the location and cause of the performance problem. It also provides concrete suggestions on how to modify their parallel program to improve the performance. Chapter 8 gives an overview of current interconnection networks for parallel systems, analyzes the scalability of interconnection networks, and discusses how to measure and improve network performances. Performance Evaluation, Prediction and Visualization in Parallel Systems serves as an excellent reference for researchers, and may be used as a text for advanced courses on the topic.
Download or read book Distributed and Parallel Systems written by Péter Kacsuk and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed and Parallel Systems: From Instruction Parallelism to Cluster Computing is the proceedings of the third Austrian-Hungarian Workshop on Distributed and Parallel Systems organized jointly by the Austrian Computer Society and the MTA SZTAKI Computer and Automation Research Institute. This book contains 18 full papers and 12 short papers from 14 countries around the world, including Japan, Korea and Brazil. The paper sessions cover a broad range of research topics in the area of parallel and distributed systems, including software development environments, performance evaluation, architectures, languages, algorithms, web and cluster computing. This volume will be useful to researchers and scholars interested in all areas related to parallel and distributed computing systems.
Download or read book Past Present Parallel written by Arthur Trew and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: Past, Present, Parallel is a survey of the current state of the parallel processing industry. In the early 1980s, parallel computers were generally regarded as academic curiosities whose natural environment was the research laboratory. Today, parallelism is being used by every major computer manufacturer, although in very different ways, to produce increasingly powerful and cost-effec- tive machines. The first chapter introduces the basic concepts of parallel computing; the subsequent chapters cover different forms of parallelism, including descriptions of vector supercomputers, SIMD computers, shared memory multiprocessors, hypercubes, and transputer-based machines. Each section concentrates on a different manufacturer, detailing its history and company profile, the machines it currently produces, the software environments it supports, the market segment it is targetting, and its future plans. Supplementary chapters describe some of the companies which have been unsuccessful, and discuss a number of the common software systems which have been developed to make parallel computers more usable. The appendices describe the technologies which underpin parallelism. Past, Present, Parallel is an invaluable reference work, providing up-to-date material for commercial computer users and manufacturers, and for researchers and postgraduate students with an interest in parallel computing.
Download or read book Computer Architecture written by Mehdi R. Zargham and published by . This book was released on 1996 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text takes a two-fold approach: to provide a foundation for understanding and evaluating the design principles incorporated in modern computers; and to present basic techniques for designing parallel systems and parallel algorithms.
Download or read book Introduction to Parallel and Vector Solution of Linear Systems written by James M. Ortega and published by Springer Science & Business Media. This book was released on 1988-04-30 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt: Although the origins of parallel computing go back to the last century, it was only in the 1970s that parallel and vector computers became available to the scientific community. The first of these machines-the 64 processor llliac IV and the vector computers built by Texas Instruments, Control Data Corporation, and then CRA Y Research Corporation-had a somewhat limited impact. They were few in number and available mostly to workers in a few government laboratories. By now, however, the trickle has become a flood. There are over 200 large-scale vector computers now installed, not only in government laboratories but also in universities and in an increasing diversity of industries. Moreover, the National Science Foundation's Super computing Centers have made large vector computers widely available to the academic community. In addition, smaller, very cost-effective vector computers are being manufactured by a number of companies. Parallelism in computers has also progressed rapidly. The largest super computers now consist of several vector processors working in parallel. Although the number of processors in such machines is still relatively small (up to 8), it is expected that an increasing number of processors will be added in the near future (to a total of 16 or 32). Moreover, there are a myriad of research projects to build machines with hundreds, thousands, or even more processors. Indeed, several companies are now selling parallel machines, some with as many as hundreds, or even tens of thousands, of processors.
Download or read book Parallel Systems written by Jonathan Bendor and published by Univ of California Press. This book was released on 2023-11-10 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title is part of UC Press's Voices Revived program, which commemorates University of California Press’s mission to seek out and cultivate the brightest minds and give them voice, reach, and impact. Drawing on a backlist dating to 1893, Voices Revived makes high-quality, peer-reviewed scholarship accessible once again using print-on-demand technology. This title was originally published in 1985.
Download or read book Data Parallel C written by James Reinders and published by Apress. This book was released on 2020-11-19 with total page 548 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to accelerate C++ programs using data parallelism. This open access book enables C++ programmers to be at the forefront of this exciting and important new development that is helping to push computing to new levels. It is full of practical advice, detailed explanations, and code examples to illustrate key topics. Data parallelism in C++ enables access to parallel resources in a modern heterogeneous system, freeing you from being locked into any particular computing device. Now a single C++ application can use any combination of devices—including GPUs, CPUs, FPGAs and AI ASICs—that are suitable to the problems at hand. This book begins by introducing data parallelism and foundational topics for effective use of the SYCL standard from the Khronos Group and Data Parallel C++ (DPC++), the open source compiler used in this book. Later chapters cover advanced topics including error handling, hardware-specific programming, communication and synchronization, and memory model considerations. Data Parallel C++ provides you with everything needed to use SYCL for programming heterogeneous systems. What You'll Learn Accelerate C++ programs using data-parallel programming Target multiple device types (e.g. CPU, GPU, FPGA) Use SYCL and SYCL compilers Connect with computing’s heterogeneous future via Intel’s oneAPI initiative Who This Book Is For Those new data-parallel programming and computer programmers interested in data-parallel programming using C++.
Download or read book Server Architectures written by René J. Chevance and published by Elsevier. This book was released on 2004-12-31 with total page 783 pages. Available in PDF, EPUB and Kindle. Book excerpt: The goal of this book is to present and compare various options one for systems architecture from two separate points of view. One, that of the information technology decision-maker who must choose a solution matching company business requirements, and secondly that of the systems architect who finds himself between the rock of changes in hardware and software technologies and the hard place of changing business needs. Different aspects of server architecture are presented, from databases designed for parallel architectures to high-availability systems, and touching en route on often- neglected performance aspects. - The book provides IT managers, decision makers and project leaders who want to acquire knowledge sufficient to understand the choices made in and capabilities of systems offered by various vendors - Provides system design information to balance the characteristic applications against the capabilities and nature of various architectural choices - In addition, it offers an integrated view of the concepts in server architecture, accompanied by discussion of effects on the evolution of the data processing industry
Download or read book The Electrician written by and published by . This book was released on 1886 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt:
