Download or read book Papers XIV ISABE from the Fourteenth International Symposium on Air Breathing Engines written by Paul J. Waltrup and published by . This book was released on 1999 with total page 184 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book International Aerospace Abstracts written by and published by . This book was released on 1999 with total page 1042 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scramjets written by Mostafa Barzegar Gerdroodbary and published by Butterworth-Heinemann. This book was released on 2020-07-21 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Scramjet engines are a type of jet engine and rely on the combustion of fuel and an oxidizer to produce thrust. While scramjets are conceptually simple, actual implementation is limited by extreme technical challenges. Hypersonic flight within the atmosphere generates immense drag, and temperatures found on the aircraft and within the engine can be much greater than that of the surrounding air. Maintaining combustion in the supersonic flow presents additional challenges, as the fuel must be injected, mixed, ignited, and burned within milliseconds. Fuel mixing, along with the configuration and positioning of the injectors and the boundary conditions, play a key role in combustion efficiency. Scramjets: Fuel Mixing and Injection Systems discusses how fuel mixing efficiency and the advantage of injection systems can enhance the performance of the scramjets. The book begins with the introduction of the supersonic combustion chamber and explains the main parameters on the mixing rate. The configuration of scramjets is then introduced with special emphasis on the main effective parameters on the mixing of fuel inside the scramjets. In addition, basic concepts and principles on the mixing rate and fuel distribution within scramjets are presented. Main effective parameters such as range of fuel concentration for the efficient combustion, pressure of fuel jet and various arrangement of jet injections are also explained. This book is for aeronautical and mechanical engineers as well as those working in supersonic combustion who need to know the effects of compressibility on combustion, of shocks on mixing and on chemical reactions, and vorticity on the flame anchoring. - Explains the main applicable approaches for enhancement of supersonic combustion engines and the new techniques of fuel injection - Shows how the interaction of main air stream with fuel injections can develop the mixing inside the scramjets - Presents results of numerical simulations and how they can be used for the development of the combustion engines
Download or read book Computational Approaches for Aerospace Design written by Andy Keane and published by John Wiley & Sons. This book was released on 2005-08-05 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the last fifty years, the ability to carry out analysis as a precursor to decision making in engineering design has increased dramatically. In particular, the advent of modern computing systems and the development of advanced numerical methods have made computational modelling a vital tool for producing optimized designs. This text explores how computer-aided analysis has revolutionized aerospace engineering, providing a comprehensive coverage of the latest technologies underpinning advanced computational design. Worked case studies and over 500 references to the primary research literature allow the reader to gain a full understanding of the technology, giving a valuable insight into the world’s most complex engineering systems. Key Features: Includes background information on the history of aerospace design and established optimization, geometrical and mathematical modelling techniques, setting recent engineering developments in a relevant context. Examines the latest methods such as evolutionary and response surface based optimization, adjoint and numerically differentiated sensitivity codes, uncertainty analysis, and concurrent systems integration schemes using grid-based computing. Methods are illustrated with real-world applications of structural statics, dynamics and fluid mechanics to satellite, aircraft and aero-engine design problems. Senior undergraduate and postgraduate engineering students taking courses in aerospace, vehicle and engine design will find this a valuable resource. It will also be useful for practising engineers and researchers working on computational approaches to design.
Download or read book Future Spacecraft Propulsion Systems and Integration written by Paul A. Czysz and published by Springer. This book was released on 2017-08-30 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: The updated and expanded third edition of this book focuses on the multi-disciplinary coupling between flight-vehicle hardware alternatives and enabling propulsion systems. It discusses how to match near-term and far-term aerospace vehicles to missions and provides a comprehensive overview of the subject, directly contributing to the next-generation space infrastructure, from space tourism to space exploration. This holistic treatment defines a mission portfolio addressing near-term to long-term space transportation needs covering sub-orbital, orbital and escape flight profiles. In this context, a vehicle configuration classification is introduced covering alternatives starting from the dawn of space access. A best-practice parametric sizing approach is introduced to correctly design the flight vehicle for the mission. This technique balances required mission with the available vehicle solution space and is an essential capability sought after by technology forecasters and strategic planners alike.
Download or read book Proceedings of the UNIfied Conference of DAMAS IncoME and TEPEN Conferences UNIfied 2023 written by Andrew D. Ball and published by Springer Nature. This book was released on with total page 1219 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Eighth International Symposium on Air Breathing Engines written by F. S. Billig and published by . This book was released on 1987 with total page 798 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific Bulletin written by and published by . This book was released on with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Active Flow and Combustion Control 2021 written by Rudibert King and published by Springer Nature. This book was released on 2021-11-12 with total page 359 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reports on the latest theoretical and experimental findings in the field of active flow and combustion control, in the context of energy conversion for power and propulsion systems. It covers new developments in actuator technology and sensing, robust and optimal open- and closed-loop control, model reduction for control purposes, and unsteady turbine cooling and performance, among other relevant topics. Gathering contributions to the Active Flow and Combustion Control (AFCC 2021), held virtually on September 28-29, 2021, from the Technische Universität Berlin, Germany, this book describes research that has been carried out within, and supported by, the collaborative research center SFB 1029 on “Substantial efficiency increase in gas turbines through direct use of coupled unsteady combustion and flow dynamics”, and funded by the German Research Foundation (DFG). It highlights theoretical and practical aspects, and corresponding solutions, that are important for the development of future energy conversion systems, thus offering a timely guide for researchers and practitioners in the field of aeronautics, turbomachinery, control and combustion.
Download or read book Gas Turbine Powerhouse written by Dietrich Eckardt and published by Walter de Gruyter GmbH & Co KG. This book was released on 2014-09-23 with total page 521 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book tells the story of the power generation gas turbine from the perspective of one of the leading companies in the field over a period of nearly 100 years, written by an engineer. Especially in times of imminent global economic crises it appears to be worthwhile to reflect on real economic values based on engineering ingenuity and enduring management of technological leadership. Though the book is primarily designed as a technical history of the BBC/ABB/Alstom power generation gas turbines, its scope is sufficiently broad to cover general development trends, including parallel competitor activities. A special benefit is the historical breakdown to the gas turbine component level, so that the book actually outlines the development of axial compressors from early beginnings, the progress in combustion technology towards extraordinary low emission values and that of axial turbines with special emphasis on early turbine cooling innovations. The sheer length of certain engineering developments over several decades allows interesting historic observations and deductions on inherent business mechanisms, the effects of technology preparations and organisational consequences. A look into the mirror of the past provides revelations on the impact of far-reaching business decisions. 2017 Winner of the Historian Engineer Award of the ASME (American Society of Mechanical Engineers
Download or read book Air Breathing Engines and Aerospace Propulsion written by B. N. Raghunandan and published by Allied Publishers. This book was released on 2004 with total page 752 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contributed papers presented at the 7th National Conference on Air Breathing Engines and Aerospace Propulsion, hosted at I.I.T., Kanpur.
Download or read book Proceedings of the 2002 ASME Joint U S European Fluids Engineering Conference written by Upendra S. Rohatgi and published by . This book was released on 2002 with total page 722 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Condition Monitoring of Machinery in Non Stationary Operations written by Anna Timofiejczuk and published by Springer. This book was released on 2017-09-20 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with a snapshot of recent methods for non-stationary vibration analysis of machinery. It covers a broad range of advanced techniques in condition monitoring of machinery, such as mathematical models, signal processing and pattern recognition methods and artificial intelligence methods, and their practical applications to the analysis of nonstationarities. Each chapter, accepted after a rigorous peer-review process, reports on a selected, original piece of work presented and discussed at the International Conference on Condition Monitoring of Machinery in Non-Stationary Operations, CMMNO’2016, held on September 12 – 16, 2016, in Gliwice, Poland. The contributions cover advances in both theory and practice in a variety of subfields, such as: smart materials and structures; fluid-structure interaction; structural acoustics as well as computational vibro-acoustics and numerical methods. Further topics include: engines control, noise identification, robust design, flow-induced vibration and many others. By presenting state-of-the-art in predictive maintenance solutions and discussing important industrial issues the book offers a valuable resource to both academics and professionals and is expected to facilitate communication and collaboration between the two groups.
Download or read book Fundamentals of Electric Aircraft written by Pascal Thalin and published by SAE International. This book was released on 2018-12-18 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Electric Aircraft was developed to explain what the electric aircraft stands for by offering an objective view of what can be expected from the giant strides in innovative architectures and technologies enabling aircraft electrification. Through tangible case studies, a deep insight is provided into this paradigm shift cutting across various aircraft segments – from General Aviation to Large Aircraft. Addressing design constraints and timelines foreseen to reach acceptable performance and maturity levels, Fundamentals of Electric Aircraft puts forward a general view of the progress made to date and what to expect in the years to come. Drawing from the expertise of four industry veterans, Pascal Thalin (editor), Ravi Rajamani, Jean-Charles Mare and Sven Taubert (contributors), it addresses futuristic approaches but does not depart too far from the operational down-to-earth realities of everyday business. Fundamentals of Electric Aircraft also offers analyses on how performance enhancements and fuel burn savings may bring more value for money as long as new electric technologies deliver on their promises.
Download or read book Theory of Periodic Conjugate Heat Transfer written by Yuri B. Zudin and published by Springer Nature. This book was released on 2023-03-24 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: An original method of investigation of the conjugate conductive-convective problem of periodic heat transfer is developed. The novelty of the approach is that a particular conjugate problem is replaced by a general boundary-value problem for the heat conduction equation in the solid. Within the framework of the hyperbolic model of thermal conductivity, the effect of self-reinforcement of the degree of conjugation by increasing the period of oscillations is found. The processes of hydrodynamics and heat exchange with periodic internal structure are considered: periodic model of turbulent heat transfer, hydrodynamic instability, bubbles dynamics in liquid, and model of evaporating meniscus. The book is intended as a source and reference work for researchers and graduate students interested in the field of conjugate heat transfer.
Download or read book Engineering Turbulence Modelling and Experiments 2 written by F. Martelli and published by Elsevier. This book was released on 2014-06-28 with total page 1012 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today understanding turbulence is one of the key issues in tackling flow problems in engineering. Powerful computers and numerical methods are now available for solving flow equations, but the simulation of turbulence effects, which are nearly always important in practice, are still at an early stage of development. Successful simulation of turbulence requires the understanding of the complex physical phenomena involved and suitable models for describing the turbulence momentum, heat and mass transfer. The 89 papers, including 5 invited papers, in this volume present and discuss new developments in the area of turbulence modelling and measurements, with particular emphasis on engineering-related problems. The high standard of the contributions on the developing and testing of turbulent models attests to the world-wide interest this domain is currently attracting from researchers.
