Download or read book Modern Technology of Pulp Paper and Paper Conversion Industries written by NIIR Board of Consultants and Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2004-08-07 with total page 543 pages. Available in PDF, EPUB and Kindle. Book excerpt: The paper conversion sectors are assuming increasingly important place in the life of every nation. Conversion technology is being evolved continuously for having better conversion, handling, transportation, preservation and usage of materials. Paper and Pulp industry plays a vital role towards conversion. Pulping is a process of delignification removing lignin from wood while leaving cellulose fibres intact. Pulp and paper can be produced from many resources like; Eta Reed, bamboo, bagasse, elephant grass, etc. Growing population and increased demand of paper products has created raw material shortage all over the world especially in developing countries. Consequently agricultural residues and farm wastes are the only hope for further pulp papermaking in these countries. However, technology is evolving that holds promise for using waste or recycled paper and, in some cases, even plastics to make an array of high performance composite products that are in themselves potentially recyclable. Pulp and paper industry is one of the largest industries in India today, which consumes huge quantity of water. As the product does not contain any water most of the water used in the process reappears as waste. Therefore the waste water is used in crop irrigation which will solve both problems i.e. industrial waste solution and irrigation. The Indian paper industry has close linkages with economic growth as higher industrial output leads to increased demand for industrial paper for packaging, increased marketing spend benefits the newsprint and value added segments, and increased education and office activities increase demand for writing and printing paper. It is estimated that there is an economic growth of 8.5% for India which will benefit the demand for paper. The major contents of the book are dry process hard boards from recycled newsprint paper fibres, abrasive kraft base paper from sun hemp (crotolaria jauncia), production of soda semi chemical pulp from sesbania sesban (linn.) merr., high yield pulps from eta reed, the influence of clay addition on flotation deinking, alternative uses for waste/paper in wood based composite products, deinking of flexo graphic newsprint: use of ultra filtration to close the water loop etc. This book also consists of alkaline pulping chemistry, manufacturers, suppliers of plant & machinery and allied products, manufacturers and suppliers of raw materials, imported pulp manufacturers & suppliers imported pulp, Indian agents for imported pulp etc. In view of the close linkage between paper and conversion industry we have tried to come out with this unique book containing relevant and useful information in both these industries. We have tried to make it most exhaustive first giving details, then presenting and dividing in different chapter to understand better. Thus we have tried to fill the vacuum that existed fill now. This book will be useful for paper chemists as well as conversion industries. TAGS Best small and cottage scale industries, Book of Pulp and Paper, Paper Board and Paper-based Technology, Book on Pulping and Papermaking, Business guidance for Pulp and paper industry, Business guidance to clients, Business Plan for a Startup Business, Business start-up, Converted Paper Products Manufacturing, Converting and Finishing Pulp & Paper, Drying of Paper, Great Opportunity for Startup, Hard-Board manufacturing, How to Start a Pulp and paper industry?, How to Start a Pulp and paper Production Business, How to start a successful Pulp and paper business, How to Start Pulp and paper Processing Industry in India, How to Start-Up a paper converting Business, Industry of pulp and paper, Kraft Paper manufacturing, Kraft Paper production, Kraft Process in the paper and pulp industry, Manufacture of pulp and paper, Modern small and cottage scale industries, Most Profitable Pulp and paper Processing Business Ideas, New small scale ideas in Pulp and paper processing industry, Paper & Paper Converting Industry, Paper and pulp industries, Paper and Pulp Production Technology book, Paper Converting, Paper Converting Machinery, Paper Making Small Business Manufacturing, Paper Production, Paper production line, Paper Production: The Kraft Process in the paper and pulp industry, Paper, Pulp and Paper Conversion, Papermaking Science and Technology book, Production of Kraft Paper, Production of Soda Semi-Chemical Pulp, Profitable small and cottage scale industries, Profitable Small Scale Pulp and paper manufacturing, Project for startups, Pulp and paper Based Profitable Projects, Pulp and paper Based Small Scale Industries Projects, Pulp and Paper Chemistry and Technology, Pulp and Paper Converting Industry, Pulp and Paper Industry, Pulp and paper industry in India, Pulp and paper industry outlook, Pulp and paper industry process, Pulp and Paper Making from Agro-Wastes, Pulp and paper making machine factory, Pulp and Paper Making Processes, Pulp and paper manufacturing Business, Pulp and paper manufacturing process, Pulp and paper Processing Industry in India, Pulp and paper Processing Projects, Pulp and Paper Technology Book, Pulping Processes, Semi chemical Pulping of Bagasse, Setting up and opening your Pulp and paper Business, Setup a Paper Manufacturing Business Startup, Small scale Commercial Pulp and paper making, Small Scale Pulp and paper Processing Projects, Small scale Pulp and paper production line, Small Start-up Business Project, Soda Semi-Chemical Pulp and Boxboard, Start Manufacturing of Paper Today, Starting a Paper Converting Business, Starting a Pulp and paper Processing Business, Starting Paper Manufacturing Business in India Business Plan, Start-up Business Plan for Pulp and paper converting industry, Startup ideas, Startup Project, Startup Project for Pulp and paper converting industry, Startup project plan, Technology of Pulp and Paper Conversion Industries, Uses for Waste Paper, Uses of pulp, Utilization of Lime, What is pulp and paper?
Download or read book The Complete Technology Book on Pulp Paper Industries written by NIIR Board of Consultants and Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2004-02-09 with total page 578 pages. Available in PDF, EPUB and Kindle. Book excerpt: The pulp and paper industry continues to expand at a phenomenal rate and it has an important role to play on the Indian economy. This imposes a difficult problem of selection. Since the amount of material that can be included in a single volume is obviously limited. Careful thought has been given to the selection with the purpose of presenting that material which will be of the greatest interest to the greatest numbers. Paper is one of the major components of urban solid waste (household and commercial waste) and has a potential resource value when collected and reused. Recycling of the waste paper has been a practice that has prevailed in the paper industry since its inception and therefore continues. The preservation of forests and increasing environmental awareness has focussed research on exploration of new fibrous resources and less toxic pulping and bleaching processes. The use of non woody already account for 9.1% of total world papermaking capacity. A variety of non woody plant fibres are used for papermaking. Paper converting refers to the processing of raw paper to produce improved grade of paper or a finished paper article. There are two types of paper converting; wet converting and dry converting. The Indian paper industry has close linkages with economic growth as higher industrial output leads to increased demand for industrial paper for packaging, increased marketing spend benefits the newsprint and value added segments, and increased education and office activities increase demand for writing and printing paper. It is estimated that there is an economic growth of 8.5% for India which will benefit the demand for paper. This book basically comprises of bio refiner mechanical pulping of bast type fibres, use of trichromatic colourimetery for measurement of brightness and yellowness of bleached pulps, finishing and converting, coating equipment, chemical and additives in papermaking, mixed pulping of jute stick and other agricultural residues etc. This book also comprises of the list of manufacturers, suppliers of plant & machinery and allied products, list of manufacturers and suppliers of raw materials, imported pulp manufacturers & suppliers imported pulp, Indian agents for imported pulp etc. This informative book will be helpful for paper technologist, paper chemists and scientists related to paper field. TAGS Pulp & Paper, Pulp and paper industry, pulp and paper process, pulp and paper industry in India, production of pulp and paper, pulp and paper production, Pulp Production, How paper is made, Pulp and Paper Making Process, pulping process for making paper, what is pulp and paper?, pulp and paper manufacturing process, making of pulp, paper making process, pulp and paper manufacturing, pulp and paper industry process, manufacturing process of paper, Pulp & Paper Plant Process, Processes for Pulp and Paper, How the paper is manufactured?, How to Make Paper, What Is Paper Pulping Process?, Paper Production Process, paper industry India, Sulfite process , What Is Coated Paper?, Products for the Pulp & Paper Industries, Pulp & Paper Industry Products, Pulp & Paper Manufacturing, paper coating process, How paper is made material manufacture, making, Paper Industry India, Indian Paper Industry, India's pulp paper industry, Coated Paper, Coated Paper Manufacturers In India, How To Coat Paper?, Sulfite Pulping, Sulphite Pulping Process, box and carton making, paperboard coating, Paper/Paperboard Coating, Coated Paperboard, Paper machine, Cylinder Mould Paper Making Machines, Cylinder paper machine, production of unbleached pulp, Bleaching of Rice Straw Pulps, Pulping And Bleaching, Aging of Paper, Pulp from Boswellia serrate, How to Start paper Processing Industry in India, Pulp and paper Processing Industry in India, Most Profitable paper Processing Business Ideas, Pulp and paper manufacturing Projects, Small Scale paper making Projects, Starting a paper manufacturing Business, How to start a pulp and paper Production Business, New small scale ideas in paper making industry, NPCS, Niir, Process technology books, Business consultancy, Business consultant, Project identification and selection, Preparation of Project Profiles, Startup, Business guidance, Business guidance to clients, Startup Project for pulp and paper, Startup Project, Startup ideas, Project for startups, Startup project plan, Business start-up, Business Plan for a Startup Business, Great Opportunity for Startup, Small Start-up Business Project, Start-up Business Plan for paper industry, Start up India, Stand up India, Pulp and paper Making Small Business Manufacturing, Paper making machine factory, Modern small and cottage scale industries, Profitable small and cottage scale industries, Setting up and opening your paper manufacturing Business, How to Start a paper industry?, How to start a successful paper making business, Small scale Commercial pulp and paper making, Best small and cottage scale industries, Pulp and paper Business, Profitable Small Scale Manufacturing,
Download or read book Paper Technology written by and published by . This book was released on 2008 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Anaerobic Technology in Pulp and Paper Industry written by Pratima Bajpai and published by Springer. This book was released on 2017-03-14 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a state-of-the-art report on the treatment of pulp and paper industry effluents using anaerobic technology. It covers a comprehensive range of topics, including the basic reasons for anaerobic treatment, comparison between anaerobic and aerobic treatment, effluent types suitable for anaerobic treatment, design considerations for anaerobic treatment, anaerobic reactor configurations applied for treatment of pulp and paper industry effluents, present status of anaerobic treatment in pulp and paper industry, economic aspects, examples of full scale installations and future trends.
Download or read book Technology of Paper Recycling written by R. McKinney and published by Springer Science & Business Media. This book was released on 1994-11-30 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers the technology of the recovery of secondary fibre for its use in paper and board manufacture. The editor, who has had substantial practical experience of designing and commissioning paper recycling plants all over the world, leads a team of experts who discuss subjects including sourcing, characterisation, mechanical handling and preparation and de-inking.
Download or read book Environmentally Friendly Technologies for the Pulp and Paper Industry written by Raymond A. Young and published by John Wiley & Sons. This book was released on 1997-11-19 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Solving the pulp and paper industries' environmental problems is essential to maintaining the forest industry and accommodating the changing economic needs of forest communities. This book explores the construction of new mills--operating on new technology that does not produce pollutants--which are vital to the pulp and paper industry.
Download or read book Pulp and Paper Industry written by Pratima Bajpai and published by Elsevier. This book was released on 2017-02-25 with total page 230 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulp and Paper Industry: Emerging Waste Water Treatment Technologies is the first book which comprehensively reviews this topic. Over the past decade, pulp and paper companies have continued to focus on minimizing fresh water use and effluent discharges as part of their move towards sustainable operating practices. Three stages—basic conservation, water reuse and water recycling—provide a systematic approach to water resource management. Implementing these stages requires increased financial investment and better utilization of water resources. The ultimate goal for pulp and paper companies is to have effluent-free factories with no negative environmental impact. The traditional water treatment technologies that are used in paper mills are not able to remove recalcitrant contaminants. Therefore, advanced water treatment technologies are being included in industrial wastewater treatment chains aiming to either improve water biodegradability or its final quality. This book discusses various measures being adopted by the pulp and paper industry to reduce water consumption and treatment techniques to treat wastewater to recover it for reuse. The book also examines the emerging technologies for treatment of effluents and presents examples of full-scale installations. Provides thorough and in-depth coverage of advanced treatment technologies which will benefit the industry personnel, pulp manufacturers, researchers and advanced students Presents new treatment strategies to improve water reuse and fulfill the legislation in force regarding wastewater discharge Presents viable solutions for pulp and paper manufacturers in terms of wastewater treatment Presents examples of full-scale installations to help motivate mill personnel to incorporate new technologies
Download or read book Pulp and Paper Industry written by Pratima Bajpai and published by Elsevier. This book was released on 2015-04-09 with total page 343 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulp and Paper Industry: Chemicals features in-depth and thorough coverage of Chemical additives in the Pulp and Paper Industry. It discusses use of Enzymes "Green Chemicals" that can improve operations in pulp and paper, describes Chemicals demanded by the end user and many key and niche players such as Akzo Nobel NV, Eka Chemicals AB, Ashland, Inc., BASF, Buckman Laboratories International, Inc., Clariant, Cytec Industries, Inc., Enzymatic Deinking Technologies, LLC, ERCO Worldwide, FMC Corporation, Georgia-Pacific Corporation, Georgia-Pacific Chemicals LLC, Imerys SA, Momentive Specialty Chemicals, Inc., Novozymes, Kemira Chemicals, Nalco Holding Company, Omya AG, Solvay AG, and Solvay Chemicals, Inc.. Paper and pulp processing and additive chemicals are an integral part of the total papermaking process from pulp slurry, through sheet formation, to effluent disposal. Environmental concerns, increased use of recycled waste paper as a replacement for virgin pulp, changes in bleaching and pulping processes, increased efficiency requirements for the papermaking process, limits on effluent discharge as well as international competitiveness have greatly impacted the paper and pulp chemical additive market. This book features in-depth and thorough coverage of Chemical additives in Pulp and Paper Industry. Detailed and up-to-date coverage of Chemicals in Pulp and Paper Industry Authoritative, thorough, and comprehensive content on a wide variety of Enzymes "Green Chemicals" Comprehensive list of Paper and Pulp Related Chemicals Comprehensive list of all Pulp and paper Suppliers Comprehensive Indexing
Download or read book Pulp and Paper Industry written by Pratima Bajpai and published by Elsevier. This book was released on 2016-08-26 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pulp and Paper Industry: Chemical Recovery examines the scientific and technical advances that have been made in chemical recovery, including the very latest developments. It looks at general aspects of the chemical recovery process and its significance, black liquor evaporation, black liquor combustion, white liquor preparation, and lime reburning. The book also describes the technologies for chemical recovery of nonwood black liquor, as well as direct alkali regeneration systems in small pulp mills. In addition, it includes a discussion of alternative chemical recovery processes, i.e. alternative causticization and gasification processes, and the progress being made in the recovery of filler, coating color, and pigments. Furthermore, it discusses the utilization of new value streams (fuels and chemicals) from residuals and spent pulping liquor, including related environmental challenges. Offers thorough and in-depth coverage of scientific and technical advances in chemical recovery in pulp making Discusses alternative chemical recovery processes, i.e., alternative causticization and gasification processes Covers the progress being made in the recovery of filler, coating color, and pigments Examines utilization of new value streams (fuels and chemicals) from residuals and spent pulping liquor Discusses environmental challenges (air emissions, mill closure) Presents ways in which the economics, energy efficiency, and environmental protection associated with the recovery process can be improved
Download or read book Water Technology in the Pulp and Paper Industry written by Technical Association of the Pulp and Paper Industry and published by . This book was released on 1957 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Paper Products Physics and Technology written by Monica Ek and published by Walter de Gruyter. This book was released on 2009-12-15 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: This four volume set covers the entire spectrum of pulp and paper chemistry and technology from starting material to processes and products including market demands. This work is essential for all students of wood science and a useful reference for those working in the pulp and paper industry or on the chemistry of renewable resources. This volume examines the physical properties of paper and modern demands on this versatile material. The book presents fundamental definitions of fibre networks and their structure, physical properties of the paper and their development during pressing and drying, interactions with moisture and its affect on mechanical properties, interactions between light and fibrous materials and the determination of optical properties of the paper, physical action of dry-strength and wet-strength chemicals, physical properties of the paper surface with special emphasis on printing and print quality, overview of packaging materials and the demands on paper from a packaging materials perspective, laminate theories for papermakers and theoretical models of paper for converting and end-uses.
Download or read book Handbook of Paper and Paperboard Packaging Technology written by Mark J. Kirwan and published by John Wiley & Sons. This book was released on 2012-11-07 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive industry reference on the paper and paperboard packaging sector. Now in a fully revised and updated second edition, this book discusses all the main types of packaging based on paper and paperboard. It considers the raw materials, the manufacture of paper and paperboard, and the basic properties and features on which packaging made from these materials depends for its appearance and performance. The manufacture of twelve types of paper- and paperboard-based packaging is described, together with their end-use applications and the packaging machinery involved. The importance of pack design is stressed, as well as how these materials offer packaging designers opportunities for imaginative and innovative design solutions. Environmental factors, including resource sustainability, societal and waste management issues are addressed in a dedicated chapter. The book is directed at readers based in companies which manufacture packaging grades of paper and paperboard, companies involved in the design, printing and production of packaging, and companies which manufacture inks, coatings, adhesives and packaging machinery. It will be essential reading for students of packaging technology and technologists working in food manufacturing who are users of paper and paperboard packaging products. Praise for the First Edition ‘This book is a valuable addition to the library of any forward-looking company by providing in-depth coverage of all aspects of packaging which involve the most ecologically acceptable material, namely paper and paperboard.’—International Journal of Dairy Technology ‘...a welcome contribution to a field where coverage was previously limited to subject-specific books... or to single chapters in textbooks on broader aspects of packaging technology.’—Packaging Technology and Science
Download or read book Handbook of Pulp and Paper Technology written by Kenneth W. Britt and published by John Wiley & Sons. This book was released on 1970 with total page 744 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technological Transformation in the Global Pulp and Paper Industry 1800 2018 written by Timo Särkkä and published by Springer. This book was released on 2018-10-24 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume provides 11 illustrative case studies of technological transformation in the global pulp and paper industry from the inception of mechanical papermaking in early nineteenth century Europe until its recent developments in today’s business environment with rapidly changing market dynamics and consumer behaviour. It deals with the relationships between technology transfer, technology leadership, raw material dependence, and product variety on a global scale. The study itemises the main drivers in technology transfer that affected this process, including the availability of technology, knowledge, investments and raw materials on the one hand, and demand characteristics on the other hand, within regional, national and transnational organisational frameworks. The volume is intended as a basic introduction to the history of papermaking technology, and it is aimed at students and teachers as course material and as a handbook for professionals working in either industry, research centres or universities. It caters to graduate audiences in forestry, business, technical sciences, and history.
Download or read book Technology and Labor in Pulp Paper Paperboard and Selected Converting Industries written by and published by . This book was released on 1994 with total page 24 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Economics of the Pulp and Paper Industry written by Magnus Diesen and published by Tappi. This book was released on 1998 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Water Technology in the Pulp and Paper Industry written by Technical Association of the Pulp and Paper Industry and published by . This book was released on 1957 with total page 170 pages. Available in PDF, EPUB and Kindle. Book excerpt: