Download or read book Paint Flow and Pigment Dispersion written by Temple C. Patton and published by . This book was released on 1964 with total page 504 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents researchers and engineers in the fields of coating (paints) and inks with a practical and comprehensive overview of rheological and related aspects of these two industries. Covers: viscosity and viscosity measurement, pigment/binder geometry and their application, critical pigment volume concentrations, surface tension phenomena, pigment dispersions and pigment disperants, solubility and interaction parameters, evaporation and volatility interaction, coating rheology, dispersion equipment, film applicators, mill base formulation and letdown, application rheology.
Download or read book Paint Flow and Pigment Dispersion written by Temple C. Patton and published by Wiley-Interscience. This book was released on 1979-04-18 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents researchers and engineers in the fields of coating (paints) and inks with a practical and comprehensive overview of rheological and related aspects of these two industries. This Second Edition contains new chapters on pigment/binder geometry, theoretical aspects of dispersion, and capillarity. Covers: viscosity and viscosity measurement, pigment/binder geometry and their application, critical pigment volume concentrations, surface tension phenomena, pigment dispersions and pigment disperants, solubility and interaction parameters, evaporation and volatility interaction, coating rheology, dispersion equipment, film applicators, mill base formulation and letdown, application rheology.
Download or read book Paint Flow and Pigment Dispersion Patton written by Temple C. Patton and published by . This book was released on 1966 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Paint Testing Manual written by Sward and published by ASTM International. This book was released on 1972 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pigment Dispersion written by Frederick K. Daniel and published by . This book was released on 1988* with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Paint and Coating Testing Manual written by and published by ASTM International. This book was released on with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pigment Processing written by Juan M. Oyarzún and published by Vincentz Network GmbH & Co KG. This book was released on 2000 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Technological Applications of Dispersions written by Robert B. McKay and published by CRC Press. This book was released on 2020-08-26 with total page 580 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This comprehensive guide illustrates the effects of dispersions in applications, the means necessary to achieve these effects with optical results, and how to overcome or avoid the difficulties encounteredemphasizing the dispersions of solid particles in liquid or solid media."
Download or read book The Chemistry and Physics of Coatings written by Alistair R Marrion and published by Royal Society of Chemistry. This book was released on 2007-10-31 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Chemistry and Physics of Coatings provides an introduction to the science underpinning the paint (organic coatings) industry to graduate level chemists who may have no previous knowledge of polymer-based technologies. This book stresses important physical phenomena such as rheology, film formation, and mechanical properties, their exploitation in paint, and the economic and legislative background against which coatings technology is tested. Attention is given to the chemistry of the polymers, pigments, and solvents that compose typical coatings, and the complex 'science and art' of formulating them effectively. The book also aims to give insights into the commercial application of the chemistries described, and includes a glossary of industry and polymer-related terms. Revised and updated, this second edition has been expanded to include separate chapters on binders for high solids and solvent-free coatings, inorganic and hybrid coatings and coatings formulation. There is also a new section on coatings additives. The Chemistry and Physics of Coatings will be of particular interest to graduates of materials and polymer sciences and related areas. It will also appeal to undergraduates, lecturers and those in the paint industry. Extracts from reviews of 1st Edition "... readable and surprisingly comprehensive ... In short this is an excellent book, which I recommend without hesitation." Journal of Materials Chemistry "..an informative and thoroughly recommended volume." Polymer International
Download or read book Oil Absorption of Pigments written by Charles W. Glancy and published by . This book was released on 2012 with total page 11 pages. Available in PDF, EPUB and Kindle. Book excerpt: MIXING A PIGMENT WITH LINSEED OIL AND MAK-ing a paste is a preliminary test applied to pigments that has been in use in a systematic manner for almost a century and perhaps even longer in a less defined manner. This proved to be a practical means to qualitatively characterize the approximate color and texture of pigments quickly with materials and tools readily at hand. The work of mixing and the flow properties of the resulting paste provided an estimate of the rheological impact of a new pigment under consideration or a proposed pigment composition change. Thus, valuable insight of the dispersion performance of a pigment or formulation change in a mill base could be estimated. Further extension of the test was found to be useful in predicting the consistency of finished products. Mills [3] indicated that if equal volumes of oil absorption paste are mixed or thinned with equal volumes of thinners, the paints prepared have equal resistance to flow, viscosity, or consistency. While the application of oil absorption values as a formulation tool originated many years ago in the age of oil- and alkyd binder-based paints, the ability to use this information to calculate the binding power index of latex binders, latex porosity index of latex paints, and free binder continues to demonstrate the value of pigment oil absorption data today to solve coatings formulation problems. This is especially true for the field of interior and exterior architectural paints. If the oil absorption test is conducted in a quantitative manner, the result is a measure of the oil needed to wet the surface area of the pigment and to fill the voids in and among the pigment particles. If this result is achieved, profoundly important information is obtained of high value to pigmented paint and coatings development. A number of relatively simple test procedures have been developed to measure oil absorption of pigments. The difficulty generally to successfully applying these tests has been in two areas. First, great care and effort is required to reach and interpret the oil absorption end point. Secondly, one must obtain particle separation in the test to the same degree as achieved with the formulation in the pigment dispersion manufacturing process to which oil absorption value is to be related. Two ASTM pigment oil absorption test methods are available, which cover two incorporation methods. The different methods result in different end points and therefore different oil absorption values. Stieg [4] found that if the oil absorption value is determined by the ASTM D281 (Test Method for Oil Absorption of Pigments by Spatula Rub-Out) and expressed on a volume basis, it is proportional to the critical pigment volume concentration (CPVC) of alkyd wall paints. Later he and others demonstrated the extension of oil absorption values to calculate the CPVC of pigment compositions to predict the performance of latex paints and other calculated factors useful in formulating these coatings. Gardner-Coleman oil absorption, ASTM D1483 (Test Method for Oil Absorption of Pigments by Gardner-Coleman Method), values have been related to pigment paste viscosities and found useful in estimating consistencies by comparison to a reference standard pigment behavior in the same dispersion machinery. A number of non-ASTM methods for the determination of oil absorption values have been reported in the literature and a few will be listed below.
Download or read book Coatings Technology written by Arthur A. Tracton and published by CRC Press. This book was released on 2006-11-07 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Drawn from the third edition of The Coatings Technology Handbook, this book focuses entirely on testing, experimental design, and strategies for selecting processing techniques in the coatings, adhesives, paints, and inks industries. Coatings Technology: Fundamentals, Testing, and Processing Techniques contains the latest coating and processing met
Download or read book Coatings Technology Handbook written by Arthur A. Tracton and published by CRC Press. This book was released on 2005-07-28 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing and applications-summarizing both the latest developments and standard coatings methods. Take advantage of the insights and experience of over
Download or read book Introduction to Polymer Rheology and Processing written by Nicholas P. Cheremisinoff and published by CRC Press. This book was released on 2018-01-18 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Introduction to Polymer Rheology and Processing is a practical desk reference providing an overview of operating principles, data interpretation, and qualitative explanation of the importance and relationship of rheology to polymer processing operations. It covers full-scale processing operations, relating industrial processing operations and design methodology to laboratory-scale testing. Hundreds of design formulas applicable to scaling up the processing behavior of polymeric melts are presented. The book also provides a "working knowledge" description of major rheological test methods useful in product development and includes a useful glossary of polymer and test method/instrumentation definitions. Lavishly illustrated and featuring numerous sample calculations and modeling approaches, An Introduction to Polymer Rheology and Processing is a "must have" book for polymer engineers and rheologists.
Download or read book Coatings Technology Handbook Second Edition written by D. Satas and published by CRC Press. This book was released on 2000-11-01 with total page 934 pages. Available in PDF, EPUB and Kindle. Book excerpt: Serving as an all-in-one guide to the entire field of coatings technology, this encyclopedic reference covers a diverse range of topics-including basic concepts, coating types, materials, processes, testing, and applications- and summarizes the latest developments and standard coating methods. Helping readers apply the best coatings for their product needs, the book provides the insights and experience of over 100 recognized experts in over 100 chapters to select. Emphasizing an interdisciplinary exchange of ideas and approaches, the book is illustrated with more than 350 drawings and photographs, plus early 1400 literature references, equations, and tables.
Download or read book Waterborne Environmentally Friendly Coating Technologies written by James W. Rawlins and published by DEStech Publications, Inc. This book was released on 2013-03-12 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer and colloidal chemistry, fabrication and testing of waterborne coatings PURs, polyisocyanates, acrylics, vinyls and more Sustainable surfactants, water soluble catalysts, high-throughput rheology, pigments This series volume contains 34 original papers on the chemistry and formulation of waterborne coatings. Chapters cover UV curing, testing and applications in many areas of latex paints, grouting and varnishes. The book discusses advances in curing, adhesion, superhydrophobic coatings and additives, with special attention to sustainable materials and methods.
Download or read book Industrial Applications II written by Tharwat F. Tadros and published by Walter de Gruyter GmbH & Co KG. This book was released on 2017-12-18 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 4 of the Handbook of Colloid and Interface Science is a survey into the applications of colloids in a variety of fields, based on theories presented in Volumes 1 and 2. The Handbook provides a complete understanding of how colloids and interfaces can be applied in materials science, chemical engineering, and colloidal science. It is ideally suited as reference work for research scientists, universities, and industries.
Download or read book Surface Phenomena and Additives in Water Based Coatings and Printing Technology written by Mahendra K. Sharma and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: Water-based technology has undergone revolutionary changes during the past two decades. Interest in the properties and uses of water-based coatings, paints and inks has continued to grow since the establishment of the Clean Air Act of 1970. The present book is devoted to recent developments and trends in water-based coating and ink technology. This volume is divided in three broad catagories: (1) Additives and Water-based Coating/Ink Systems, (2) Surface Modifications and Wettability, and (3) Ink/Coating Formulations and Their characterization. The role of various additives to improve the performance and properties of water-based coatings with special reference to surface phenomena such as wettability, adhesion, surface energies, dispersion stability, particle size and size distribution are presented in these sections. This volume documents the proceedings of the International symposium on Surface Phenomena and Additives in Water-Based Coatings and Printing Technology sponsored by the 21st Annual Meeting of the Fine Particle Society (FPS). This meeting was held in San Diego, california, AUgust 21-25, 1990. The symposium upon which this volume is based was organized in four sessions emphasizing several basic and applied aspects of water-based coatings and printing technology. Major topics discussed include advances in water-based technology, water-based flexo and gravure inks, hydrophobically-modified cellulosic thickeners, organosilicones, uv curable silicone release coatings, surface characterization of Ti02 pigments, polymer substrates, flexographic plates and coating films, pigment wetting and dispersing agents, hydrotrope effect in emulsion polymers, film thickness control, particle size measurements, rheological properties, and statistically designed mixtures for ink formulations.