Download or read book Advanced Ph Measurement and Control written by Gregory K. McMillan and published by ISA. This book was released on 2004-10-30 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Frontiers in Advanced Control Systems written by Ginalber Luiz Serra and published by BoD – Books on Demand. This book was released on 2012-07-25 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book pretends to bring the state-of-art research results on advanced control from both the theoretical and practical perspectives. The fundamental and advanced research results as well as the contributions in terms of the technical evolution of control theory are of particular interest. This book can serve as a bridge between people who are working on the theoretical and practical research on control theory, and facilitate the proposal of development of new control techniques and its applications. In addition, this book presents educational importance to help students and researchers to know the frontiers of the control technology.
Download or read book Computer Aided Design in Control Systems 1988 written by Zhen-Yu Chen and published by Elsevier. This book was released on 2017-05-03 with total page 489 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains 73 papers, presenting the state of the art in computer-aided design in control systems (CADCS). The latest information and exchange of ideas presented at the Symposium illustrates the development of computer-aided design science and technology within control systems. The Proceedings contain six plenary papers and six special invited papers, and the remainder are divided into five themes: CADCS packages; CADCS software and hardware; systems design methods; CADCS expert systems; CADCS applications, with finally a discussion on CADCS in education and research.
Download or read book Advanced Automation Techniques In Adaptive Material Processing written by Xiaoqi Chen and published by World Scientific. This book was released on 2002-09-06 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume presents the editors' research as well as related recent findings on the applications of modern technologies in electrical and electronic engineering to the automation of some of the common manufacturing processes that have traditionally been handled within the mechanical and material engineering disciplines.In particular, the book includes the latest research results achieved through applied research and development projects over the past few years at the Gintic Institute of Manufacturing Technology, Singapore. It discusses advanced automation technologies such as in-process sensors, laser vision systems, and laser strobe vision, as well as advanced techniques such as sensory signal processing, adaptive process control, fuzzy logic, neural networks, expert systems, laser processing control, etc. The methodologies and techniques are applied to some important material processing applications, including grinding, polishing, machining, and welding. Practical automation solutions, which are complicated by part distortions, tool wear, process dynamics, and variants, are explained.The research efforts featured in the book are driven by industrial needs. They combine theoretical research with practical automation considerations. The techniques developed have been either implemented in the factory or prototyped in the laboratory.
Download or read book PC BASED INSTRUMENTATION written by N. MATHIVANAN and published by PHI Learning Pvt. Ltd.. This book was released on 2007-01-21 with total page 704 pages. Available in PDF, EPUB and Kindle. Book excerpt: This well-organized book is intended for the undergraduate students of Electrical, Electronics and Communications, Computer, Instrumentation and Instrumentation and Control Engineering; and postgraduate students of science in Electronics, Physics and Instrumentation. Data acquisition being the core of all PC-based measurements and control instrumentation systems engineering, this book presents detailed discussions on PC bus based data acquisition, remote data acquisition, GPIB data acquisition and networked data acquisition configurations. This book also describes sensors, signal-conditioning and principles of PC-based data acquisition. It provides several latest and advanced techniques. This book stresses the need for understanding the use of Personal Computers in measurement and control instrumentation applications. KEY FEATURES : • Provides several laboratory experiments to help the readers to gain hands-on experience in PC-based measurement and control. • Provides a number of review questions/problems (with solutions to the odd numbered problems) and objective type questions with solutions. • Presents a number of working circuits, design and programming examples. • Presents comparison of properties, features and characteristics of different bus systems, interface standards, and network protocols. • Includes the advanced techniques such as sigma–delta converter, RS-485, I2C bus, SPI bus, FireWire, IEEE-488.2, SCPI and Fieldbus standards.
Download or read book Spinoff written by and published by . This book was released on 1996 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Lyapunov Based Control of Robotic Systems written by Aman Behal and published by CRC Press. This book was released on 2009-12-17 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lyapunov-Based Control of Robotic Systems describes nonlinear control design solutions for problems that arise from robots required to interact with and manipulate their environments. Since most practical scenarios require the design of nonlinear controllers to work around uncertainty and measurement-related issues, the authors use Lyapunov's direc
Download or read book Industrial and Laboratory Measuring Systems written by Josef Vedral and published by CRC Press. This book was released on 2024-10-04 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the types and properties of computer controlled industrial and laboratory measuring systems for data acquisition and the processing signals of typical physical sensors. It is intended for users and designers of digital measurement systems working in laboratories and industry, scientific and research environments, and students taking relevant courses. An overview of the properties of these sensors used in laboratory and industrial environments is provided. The chapters describe the properties of computers used in measurement systems, including plug-in cards and the IEEE-488 protocol. The following chapters describe the types and properties of distributed and modular measuring systems and systems using data networks, including wireless measuring systems. The final chapters describe methods of digitization, reconstruction and signal processing in measurement systems in time and frequency domains.
Download or read book Simulation of Control Systems written by F. Breitenecker and published by Elsevier. This book was released on 2014-06-28 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume investigates simulation and computer-aided control system designs. The book covers the use of models and program packages, their theoretical aspects and practical applications, and uses illustrative case studies to give a comprehensive view of this fast developing science.
Download or read book Biomedical Research Technology Resources written by and published by . This book was released on 1987 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Directory of resources that serve the national biomedical community with new technologies and procedures. Arrangement according to category of resources service, i.e., Biochemical materials resources, Biological structure and function resources, Biomedical engineering resources, and Computer resources. Each entry gives title of resource, principal investigator, services available, and research emphasis or application. Geographical index.
Download or read book Advanced Hybrid Information Processing written by Weina Fu and published by Springer Nature. This book was released on 2023-03-21 with total page 806 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set constitutes the post-conference proceedings of the 6th EAI International Conference on Advanced Hybrid Information Processing, ADHIP 2022, held in Changsha, China, in September 29-30, 2022. The 109 full papers presented were selected from 276 submissions and focus on theory and application of hybrid information processing technology for smarter and more effective research and application. The theme of ADHIP 2022 was Hybrid Information Processing in Meta World. The papers are named in topical sections as follows: Information Extracting and Processing in Digital World; Education Based methods in Learning and Teaching; Various Systems for Digital World.
Download or read book Electrical Technology written by N. P Subramaniam and published by ALPHA SCIENCE INTERNATIONAL LIMITED. This book was released on 2017-08-04 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: ELECTRICAL TECHNOLOGY is systematically developed to meet the syllabus of undergraduate course in Electrical Engineering of various universities. The complicated concepts are explained in a lucid manner with the help of necessary diagrams and waveforms. Comprehensive coverage has been made to explain the concepts of application-level topics like Electric Traction and Power Electronics. Review questions have been added at the end of each chapter for better understanding of the subject apart from numerous numerical and design problems.
Download or read book Advances in Water Desalination written by Noam Lior and published by John Wiley & Sons. This book was released on 2012-10-26 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Desalination is a dynamically growing field with more research, more engineering, more applications, more countries, more people, and with more training programs. This book provides high quality invited reviews on progress in various aspects of the desalination field. It features comprehensive coverage of desalination science, technology, economics, markets, energy considerations, environmental impact, and more. It is a key guide for professionals and researchers in water desalination and related areas including chemical, mechanical, and civil engineers, chemists, materials scientists, manufacturers of desalination membranes, water reuse engineers, and water authorities, as well as students in these fields.
Download or read book Advanced Welding Processes written by J Norrish and published by Elsevier. This book was released on 2006-10-11 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced welding processes provides an excellent introductory review of the range of welding technologies available to the structural and mechanical engineer. The book begins by discussing general topics such power sources, filler materials and gases used in advanced welding. A central group of chapters then assesses the main welding techniques: gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), high energy density processes and narrow-gap welding techniques. Two final chapters review process control, automation and robotics.Advanced welding processes is an invaluable guide to selecting the best welding technology for mechanical and structural engineers. - An essential guide to selecting the best welding technology for mechanical and structural engineers - Provides an excellent introductory review of welding technologies - Topics include gas metal arc welding, laser welding and narrow gap welding methods
Download or read book Modeling and Simulation with Simulink written by Dingyü Xue and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-03-07 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: The essential, intermediate and advanced topics of Simulink are covered in the book. The concept of multi-domain physical modeling concept and tools in Simulink are illustrated with examples for engineering systems and multimedia information. The combination of Simulink and numerical optimization methods provides new approaches for solving problems, where solutions are not known otherwise.
Download or read book Biological Control and Improvement of Salmon and Advanced Concept of the Technology for Aquaculture written by and published by . This book was released on 1996 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Symposium on Advanced Equipment and Facilities for Wastewater Treatment written by and published by . This book was released on 1978 with total page 84 pages. Available in PDF, EPUB and Kindle. Book excerpt:
