Download or read book Oxidation of Iron Nickel and Cobalt base Alloys written by I. G. Wright and published by . This book was released on 1972 with total page 70 pages. Available in PDF, EPUB and Kindle. Book excerpt: Iron-, nickel-, and cobalt-base superalloys, starting from the compositions Fe-20Cr, Ni-20Cr, and Co-(20 to 25)Cr, have been developed along fundamentally different routes dictated mainly by differing compositional requirements in the search for increased high temperature strength. In Ni-Cr alloys, for example, chromium content has been decreased gradually, and the aluminum content increased to the extent that the alloys now are basically Ni-Cr-Al alloys. In the review current data relating to the oxidation of the relevant pure metals and their binary and ternary alloys are examined first, and then data on oxidation of the more complex engineering alloys are considered. The oxidizing atmosphere is assumed to be oxygen or air, but the mechanisms described generally are applicable to other oxidizing atmospheres. (Author).
Download or read book Oxidation of Nickel and Cobalt base Superalloys written by Carl H. Lund and published by . This book was released on 1965 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report presents information dealing with the oxidation of nickel- and cobalt-base superalloys. All of the superalloys will oxidize at high temperatures when oxygen is present in the enveloping atmosphere. The rate of oxidation depends upon alloy composition, temperature, oxygen concentration, oxides formed, diffusion rates of the metals in both base metal and oxide, diffusion rate of oxygen in the oxide, solubility of oxygen in the matrix, and a host of other variables. The effects of oxidation can be beneficial or they can be harmful. The first section of this report deals with the fundamentals of the oxidation of Ni-Cr and Co-Cr alloys. Subsequent sections discuss general surface oxidation, intergranular oxidation, other subsurface oxidation, and the effect of stress on the rate of oxidation. Numerous specific alloys are mentioned in the report; as an aid to the reader, the appendix contains an alloy index of the alloys mentioned in the report along with the compositions of the alloys, and the pages on which mention of the alloys is made.
Download or read book Nickel Cobalt and Their Alloys written by Joseph R. Davis and published by ASM International. This book was released on 2000-01-01 with total page 450 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive guide to the compositions, properties, processing, performance, and applications of nickel, cobalt, and their alloys. It includes all of the essential information contained in the ASM Handbook series, as well as new or updated coverage in many areas in the nickel, cobalt, and related industries.
Download or read book Nickel Alloys written by Ulrich Heubner and published by CRC Press. This book was released on 2000-09-01 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book evaluates the latest developments in nickel alloys and high-alloy special stainless steels by material number, price, wear rate in corrosive media, mechanical and metallurgical characteristics, weldability, and resistance to pitting and crevice corrosion. Nickel Alloys is at the forefront in the search for the most economic solutions to c
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1984 with total page 1278 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Energy Research Abstracts written by and published by . This book was released on 1990 with total page 852 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book High Temperature Corrosion and Materials Applications written by George Y. Lai and published by ASM International. This book was released on 2007-01-01 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: George Lai's 1990 book, High-Temperature Corrosion of Engineering Alloys, is recognized as authoritative and is frequently consulted and often cited by those in the industry. His new book, almost double in size with seven more chapters, addresses the new concerns, new technologies, and new materials available for those engaged in high-temperature applications. As we strive for energy efficiency, the realm of high-temperature environments is expanding and the need for information on high temperature materials applications was never greater. In addition to extensive expansion on most of the content of the original book, new topics include erosion and erosion-corrosion, low NOx combustion in coal-fired boilers, fluidized bed combustion, and the special demands of waste-to-energy boilers, waste incinerators, and black liquor recovery boilers in the pulp and paper industry. The corrosion induced by liquid metals is discussed and protection options are presented.
Download or read book ASM Specialty Handbook written by Joseph R. Davis and published by ASM International. This book was released on 1997-01-01 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt: Materials covered include carbon, alloy and stainless steels; alloy cast irons; high-alloy cast steels; superalloys; titanium and titanium alloys; refractory metals and alloys; nickel-chromium and nickel-thoria alloys; structural intermetallics; structural ceramics, cermets, and cemented carbides; and carbon-composites.
Download or read book Alloys written by Fathi Habashi and published by John Wiley & Sons. This book was released on 2008-11-21 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: In industry very few metals are used in their pure form; the majority are employed as a combination of a metal with other metals, nonmetals or metalloids. In this way some specific properties are improved, making the alloy more attractive than the pure metal. The present work comprises essential information on alloys in one compact volume. Classification, properties, preparation, applications, and economic aspects are discussed for alloy steels, primary-metal alloys, light-metal alloys, and some other alloy systems. The work is based on more than 30 articles from Ullmann's Encyclopedia of Industrial Chemistry and represents the effort of over 60 specialists. It supplies hundreds of top-quality illustrations, diagrams, and charts and provides hand-picked references for further study. An introductory overview of the subject is provided by the editor. The book is a handy yet authoritative reference work for the practicing metallurgist, but also for physical metallurgists, engineers and scientists in industry.
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975-04 with total page 1082 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Woldman s Engineering Alloys written by John P. Frick and published by ASM International. This book was released on 2000-01-01 with total page 1369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Annotation New edition of a reference that presents the values of properties typical for the most common alloy processing conditions, thus providing a starting point in the search for a suitable material that will allow, with proper use, all the necessary design limitations to be met (strength, toughness, corrosion resistance and electronic properties, etc.) The data is arranged alphabetically and contains information on the manufacturer, the properties of the alloy, and in some cases its use. The volume includes 32 tables that present such information as densities, chemical elements and symbols, physical constants, conversion factors, specification requirements, and compositions of various alloys and metals. Also contains a section on manufacturer listings with contact information. Edited by Frick, a professional engineering consultant. Annotation c. Book News, Inc., Portland, OR (booknews.com).
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1971 with total page 1388 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications Cumulative Index written by United States. Superintendent of Documents and published by . This book was released on 1976 with total page 1408 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactor Core Materials written by and published by . This book was released on 1961 with total page 324 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Reactor Materials written by and published by . This book was released on 1961 with total page 1094 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mond Nickel Bulletin written by and published by . This book was released on 1967 with total page 538 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Index to DMIC Reports and Memoranda written by Battelle Memorial Institute. Defense Metals Information Center and published by . This book was released on 1968 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt:
