Download or read book Overconsolidated Clays written by National Research Council (U.S.). Transportation Research Board and published by . This book was released on 1982 with total page 72 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Earthworks written by N. A. Trenter and published by Thomas Telford. This book was released on 2001 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nothing can be built without some excavation and transfer of soil (or rock) from one part of a site to another and this makes earthworks the most common product of civil engineering operations. Although normally seen as major structures, such as earth fill dams or large highways or railway embankments, the majority of earthworks are connected with minor civil works and building construction. Whatever the type of work, the principles are the same. Earthworks: a guide accumulates information on topics that are essential to earthworks engineering.

Download or read book Engineering Behaviour of Heavily Overconsolidated Clays and Clay Shales with Special Reference to Long term Stability written by Yudhbir and published by . This book was released on 1969 with total page 356 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Initiation of Failure in Slopes in Overconsolidated Clays and Clay Shales written by Ioannis V. Constantopoulos and published by . This book was released on 1971 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geotechnical Engineering written by V.N.S. Murthy and published by CRC Press. This book was released on 2002-10-25 with total page 1066 pages. Available in PDF, EPUB and Kindle. Book excerpt: A must have reference for any engineer involved with foundations, piers, and retaining walls, this remarkably comprehensive volume illustrates soil characteristic concepts with examples that detail a wealth of practical considerations, It covers the latest developments in the design of drilled pier foundations and mechanically stabilized earth retaining wall and explores a pioneering approach for predicting the nonlinear behavior of laterally loaded long vertical and batter piles. As complete and authoritative as any volume on the subject, it discusses soil formation, index properties, and classification; soil permeability, seepage, and the effect of water on stress conditions; stresses due to surface loads; soil compressibility and consolidation; and shear strength characteristics of soils. While this book is a valuable teaching text for advanced students, it is one that the practicing engineer will continually be taking off the shelf long after school lets out. Just the quick reference it affords to a huge range of tests and the appendices filled with essential data, makes it an essential addition to an civil engineering library.

Download or read book The Behavior of Normally Consolidated and Heavily Overconsolidated Clays at Low Effective Stress written by Harcharan Singh and published by . This book was released on 1971 with total page 520 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Geotechnics of Hard Soils soft Rocks written by Aldo Evangelista and published by Taylor & Francis US. This book was released on 1998 with total page 608 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Geomechanics in Soil Rock and Environmental Engineering written by John Small and published by CRC Press. This book was released on 2018-09-03 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Utilizes both Computer- and Hand-Based Calculations... Modern practice in geomechanics is becoming increasingly reliant on computer-based software, much of which can be obtained through the Internet. In Geomechanics in Soil, Rock, and Environmental Engineering the application of these numerical techniques is examined not only for soil mechanics, but also for rock mechanics and environmental applications. ... For Use in Complex Analysis It deals with the modern analysis of shallow foundations, deep foundations, retaining structures, and excavation and tunneling. In recent years, the environment has become more and more important, and so it also deals with municipal and mining waste and solutions for the disposal and containment of the waste. Many fresh solutions to problems are presented to enable more accurate and advanced designs to be carried out. A Practical Reference for Industry Professionals, This Illuminating Book: Offers a broad range of coverage in soil mechanics, rock mechanics, and environmental engineering Incorporates the author‘s more than 40 years of academic and practical design experience Describes the latest applications that have emerged in the last ten years Supplies references readily available online for futher research Geomechanics in Soil, Rock, and Environmental Engineering should appeal to students in their final undergraduate course in geomechanics or master’s students, and should also serve as a useful reference to practitioners in the field of geomechanics, reflecting the author’s background in both industry and academia.

Download or read book Numerical Models in Geomechanics written by G.N. Pande and published by CRC Press. This book was released on 2004-08-15 with total page 760 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the current research and advances made in the application of numerical methods in geotechnical engineering, this volume details proceedings of the Ninth International Symposium on 'Numerical Models in Geomechanics - NUMOG IX' held in Ottawa, Canada, 25-27 August 2004. Highlighting a number of new developments in the area, papers concentrate upon the following four main areas: * constitutive relations for geomaterials * numerical algorithms: formulation and performance * modelling of transient, coupled and dynamic problems * application of numerical techniques to practical problems. Representing the most advanced, modern findings in the field, Numerical Models in Geomechanics is a comprehensive and impeccably-researched text, ideal for students and researchers as well as practising engineers.

Download or read book Chemo Mechanical Couplings in Porous Media Geomechanics and Biomechanics written by Benjamin Loret and published by Springer Science & Business Media. This book was released on 2004-06-16 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book addresses fundamental issues faced by experimentalists, modelers and engineers interested in different physical, mechanical and transport aspects of biological tissues and chemically active geological materials, mainly clays and shales. The focus is on the couplings between electro-chemical and mechanical aspects involved in swelling and chemical consolidation. Emphasis is laid on the influence of these phenomena on mechanical properties and on transport properties. Applications in geo-environmental and geotechnical technologies, including nuclear and hazardous waste isolation, oil recovery, engineering geology, are addressed directly or implied. Control of long term effects of surgery and mechanical performance of prostheses may benefit from the modeling of irreversibilities that are of utmost importance in geological materials. Conversely, understanding the self-regulation mechanisms of biological tissues may be helpful in the design of efficient engineering materials.

Download or read book Geosynthetic Reinforced Soil GRS Walls written by Jonathan T. H. Wu and published by John Wiley & Sons. This book was released on 2019-05-03 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: The first book to provide a detailed overview of Geosynthetic Reinforced Soil Walls Geosynthetic Reinforced Soil (GRS) Walls deploy horizontal layers of closely spaced tensile inclusion in the fill material to achieve stability of a soil mass. GRS walls are more adaptable to different environmental conditions, more economical, and offer high performance in a wide range of transportation infrastructure applications. This book addresses both GRS and GMSE, with a much stronger emphasis on the former. For completeness, it begins with a review of shear strength of soils and classical earth pressure theories. It then goes on to examine the use of geosynthetics as reinforcement, and followed by the load-deformation behavior of GRS mass as a soil-geosynthetic composite, reinforcing mechanisms of GRS, and GRS walls with different types of facing. Finally, the book finishes by covering design concepts with design examples for different loading and geometric conditions, and the construction of GRS walls, including typical construction procedures and general construction guidelines. The number of GRS walls and abutments built to date is relatively low due to lack of understanding of GRS. While failure rate of GMSE has been estimated to be around 5%, failure of GRS has been found to be practically nil, with studies suggesting many advantages, including a smaller susceptibility to long-term creep and stronger resistance to seismic loads when well-compacted granular fill is employed. Geosynthetic Reinforced Soil (GRS) Walls will serve as an excellent guide or reference for wall projects such as transportation infrastructure—including roadways, bridges, retaining walls, and earth slopes—that are in dire need of repair and replacement in the U.S. and abroad. Covers both GRS and GMSE (MSE with geosynthetics as reinforcement); with much greater emphasis on GRS walls Showcases reinforcing mechanisms, engineering behavior, and design concepts of GRS and includes many step-by-step design examples Features information on typical construction procedures and general construction guidelines Includes hundreds of line drawings and photos Geosynthetic Reinforced Soil (GRS) Walls is an important book for practicing geotechnical engineers and structural engineers, as well as for advanced students of civil, structural, and geotechnical engineering.

Download or read book Classification Engineering Properties and Field Exploration of Soils Intact Rock and in Situ Rock Masses written by William Joel Hall and published by . This book was released on 1974 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Soil Mechanics written by William Powrie and published by CRC Press. This book was released on 2002-06-01 with total page 741 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to encourage students to develop an understanding of the fundamentals of soil mechanics. It builds a robust and adaptable framework of ideas to support and accommodate the more complex problems and analytical procedures that confront the practising geotechnical engineer. Soil Mechanics: Concepts and Applications covers the soil mechanics and geotechnical engineering topics typically included in university courses in civil engineering and related subjects. Physical rather than mathematical arguments are used in the core sections wherever possible. New features for the second edition include: an accompanying website containing the lecturers solutions manual; a revised chapter on soil strength and soil behaviour separating the basic and more advanced material to aid understanding; a major new section on shallow foundations subject to combined vertical, horizontal and moment loading; revisions to the material on retaining walls, foundations and filter design to account for new research findings and bring it into line with the design philosophy espoused by EC7. More than 50 worked examples including case histories Learning objectives, key points and example questions

Download or read book Craig s Soil Mechanics written by R.F. Craig and published by CRC Press. This book was released on 2004-02-19 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: This seventh edition of Soil Mechanics, widely praised for its clarity, depth of explanation and extensive coverage, presents the fundamental principles of soil mechanics and illustrates how they are applied in practical situations. Worked examples throughout the book reinforce the explanations and a range of problems for the reader to solve p

Download or read book Landslides in Sensitive Clays written by Vikas Thakur and published by Springer. This book was released on 2017-05-23 with total page 593 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers the most recent scientific research on the geological, geotechnical and geophysical aspects of slope failure in sensitive clays. Gathering contributions by international experts, it focuses on understanding the complete and practical spectrum of challenges presented by landslides in such complex materials. Based on sound and validated research results, the book also presents several recommendations that could be implemented in the guidelines or code-of-practice. These recommendations cover topics including the characterization and behavior of sensitive clays; the pre-failure, failure and post-failure stages of sensitive clays; mapping and identification methods; climate change; hazard assessment; and risk management. Sensitive clays are known for their potential for causing large landslides, which pose a serious risk to human lives, infrastructure, and surrounding ecosystems within their reach. This has been demonstrated by the recent catastrophic landslides in e.g. Sørum (2016), Skjeggestad (2015), Statland (2014), Byneset (2012), St-Jude (2010), Lyngen (2010) and Kattmarka (2009). The 2015 collapse of the Skjeggestad Bridge in Norway – which was due to a landslide in sensitive clay – alone costs millions of dollars in repairs. Recently, efforts are being made to increase society’s ability to cope with such landslide hazards. Geoscientists are now expected to provide input to the agencies responsible for landslide-risk preparedness. In other words, geoscientists’ role is not only to act as technologists to establish new theories, but also to go the extra mile to implement them in practice, so as to find meaningful solutions to geotechnical problems.

Download or read book Soil Mechanics written by David Muir Wood and published by Cambridge University Press. This book was released on 2009-09-28 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book teaches the principles of soil mechanics to undergraduates, along with other properties of engineering materials, to which the students are exposed simultaneously. Using the critical state method of soil mechanics to study the mechanical behavior of soils requires the student to consider density alongside effective stresses, permitting the unification of deformation and strength characteristics. This unification aids the understanding of soil mechanics. This book explores a one-dimensional theme for the presentation of many of the key concepts of soil mechanics - density, stress, stiffness, strength, and fluid flow - and includes a chapter on the analysis of one-dimensional consolidation, which fits nicely with the theme of the book. It also presents some theoretical analyses of soil-structure interaction, which can be analyzed using essentially one-dimensional governing equations. Examples are given at the end of most chapters, and suggestions for laboratory exercises or demonstrations are given.

Download or read book Laboratory Shear Testing of Soils written by American Society for Testing and Materials and published by ASTM International. This book was released on 1964 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: