Download or read book Orthopaedic Joint Prostheses Method of Determination of Endurance Properties of the Head and Neck Region of Stemmed Femoral Components of Hip Joint Prostheses written by British Standards Institute Staff and published by . This book was released on 1992-10-15 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prosthetic devices, Prosthesis, Implants (surgical), Orthopaedic equipment, Orthopaedics, Joints (anatomy), Hips, Components, Endurance testing, Laboratory testing, Mechanical testing, Cyclic loading, Testing conditions
Download or read book Fatigue Design of Components written by G. Marquis and published by Elsevier. This book was released on 1997-12-10 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a selection of papers presented at Fatigue Design 95 held in Helsinki, Finland from 5-8 September 1995. The papers have been peer reviewed and present practical aspects for the design of components and structures to avoid fatigue failure. Topics covered include: fatigue design experiences, ground vehicle components, component reliability, multiaxial fatigue, notch analysis, service loading, welded structures, probabilistics aspects in fatigue, fatigue design optimization.
Download or read book Surgery of the Hip E Book written by Daniel J. Berry and published by Elsevier Health Sciences. This book was released on 2019-09-24 with total page 1375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Offering authoritative, comprehensive coverage of hip surgery, the 2nd Edition of Surgery of the Hip is the definitive guide to hip replacement, other open and arthroscopic surgical procedures, and surgical and nonsurgical management of the hip across the lifespan. Modeled after Insall & Scott Surgery of the Knee, it keeps you fully up to date with the latest research, techniques, tools, and implants, enabling you to offer both adults and children the best possible outcomes. Detailed guidance from expert surgeons assists you with your toughest clinical challenges, including total hip arthroplasty, pediatric hip surgery, trauma, and hip tumor surgery. - Discusses new topics such as direct anterior approach for total hip arthroplasty, hip pain in the young adult, and hip preservation surgery. - Contains new coverage of minimally invasive procedures, bearing surface selection, management of complications associated with metal and metal bearing surfaces, management of bone loss associated with revision THA, and more. - Provides expert, personal advice in "Author's Preferred Technique" sections. - Helps you make optimal use of the latest imaging techniques, surgical procedures, equipment, and implants available. - Covers tumors of the hip, hip instability and displacement in infants and young children, traumatic injuries, degenerative joint disorders, and rehabilitation considerations—all from both a basic science and practical clinical perspective.
Download or read book Characterization of Biomaterials written by Imran Khan and published by Elsevier Inc. Chapters. This book was released on 2013-03-12 with total page 43 pages. Available in PDF, EPUB and Kindle. Book excerpt: Preclinical testing is a critical part of the orthopaedic device design process and is required to demonstrate efficacy, safety and adherence to the requirements of essential regulations. The following chapter provides an overview of the key regulatory and technical requirements associated with mechanical and tribological testing of orthopaedic devices and the characterization of metallic coatings applied to such devices for improved biological fixation. Mechanical testing is typically carried out according to regional or international standards that define the type of device to be tested, its laboratory-based performance requirements and reference criteria that a product must meet. The most widely used tests for orthopaedic devices are static or fatigue tests. These may be conducted under compression, bending, shear or torsion, depending on the in vivo loading conditions that they are trying to replicate. Bearing wear simulator test methods have evolved over several decades from simpler tests such as pin-on-plate to more realistic tests that replicate the forces and motions experienced during walking or other gait cycles and, importantly, allow the testing of actual components. Current wear simulator test standards for hip and knee joints are reviewed and methods of characterizing wear debris and measuring friction are discussed. Metallic coatings on orthopaedic devices can be employed to improve the fixation of the implant to the host bone. This chapter discusses methods to characterize critical properties of metallic coatings for orthopaedic devices and also identifies the acceptance standards set by regulatory bodies for these kinds of coatings.
Download or read book Federal Register written by and published by . This book was released on 2014 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mechanical Testing of Orthopaedic Implants written by Elizabeth Friis and published by Woodhead Publishing. This book was released on 2017-05-24 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical Testing of Orthopaedic Implants provides readers with a thorough overview of the fundamentals of orthopedic implants and various methods of mechanical testing. Historical aspects are presented, along with case studies that are particularly useful for readers. - Presents information on a range of implants, from dental to spinal implants - Includes case studies throughout that help the reader understand how the content of the book is applied in practice - Provides coverage and guidance on FDA regulations and requirements - Focuses on application of mechanical testing methods
Download or read book BSI Catalogue written by and published by . This book was released on 1995 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials and Contact Characterisation IX written by S. Hernández and published by WIT Press. This book was released on 2019-07-23 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Including papers from the 9th edition of the International Conference on Computational Methods and Experiments in Material and Contact Characterisation this volume presents the work of selected researchers on the subject. Material and contact characterisation is a rapidly advancing field and this volume contains the latest research. Of particular interest to industry and society is the knowledge of surface treatment and contact mechanics of these materials to determine the in-service behaviour of components subject to contact conditions. Modern society requires systems that operate at conditions that use resources effectively. In terms of components durability, the understanding of surface engineering wear frictional and lubrication dynamics has never been so important. Current research is focussed on modification technologies that can increase the surface durability of materials. The characteristics of the system reveal which surface engineering methods should be chosen and as a consequence it is essential to study the combination of surface treatment and contact mechanics. The accurate characterisation of the physical and chemical properties of materials requires the application of both experimental techniques and computer simulation methods in order to gain a correct analysis. A very wide range of materials, starting with metals through polymers and semiconductors to composites, necessitates a whole spectrum of characteristic experimental techniques and research methods. The papers in the book cover a number of topics, including: Computer methods and simulation; Experimental and measurement techniques; Mechanical characterisation and testing; Materials under extreme conditions; Polymers and plastics; Advances in composites; Micro and macro characterisation; Corrosion and erosion; Damage, fatigue and fracture; Recycled materials; Materials and energy; Surface problems and contact mechanics; Surface modification and treatments; Thick and thin coatings; Tribomechanics and wear mechanics; Biomechanical characterisation; Biomechanical applications and Case studies.
Download or read book Human Orthopaedic Biomechanics written by Bernardo Innocenti and published by Academic Press. This book was released on 2022-02-24 with total page 759 pages. Available in PDF, EPUB and Kindle. Book excerpt: Human Orthopaedic Biomechanics: Fundamentals, Devices and Applications covers a wide range of biomechanical topics and fields, ranging from theoretical issues, mechanobiology, design of implants, joint biomechanics, regulatory issues and practical applications. The book teaches the fundamentals of physiological loading and constraint conditions at various parts of the musculoskeletal system. It is an ideal resource for teaching and education in courses on orthopedic biomechanics, and for engineering students engaged in these courses. In addition, all bioengineers who have an interest in orthopedic biomechanics will find this title useful as a reference, particularly early career researchers and industry professionals. Finally, any orthopedic surgeons looking to deepen their knowledge of biomechanical aspects will benefit from the accessible writing style in this title. - Covers theoretical aspects (mechanics, stress analysis, constitutive laws for the various musculoskeletal tissues and mechanobiology) - Presents components of different regulatory aspects, failure analysis, post-marketing and clinical trials - Includes state-of-the-art methods used in orthopedic biomechanics and in designing orthopedic implants (experimental methods, finite element and rigid-body models, gait and fluoroscopic analysis, radiological measurements)
Download or read book ISO Catalogue written by International Organization for Standardization and published by . This book was released on 2006 with total page 896 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book YY 0118 2016 Translated English of Chinese Standard YY0118 2016 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2016-08-10 with total page 23 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the terms and definitions, classification and size marking, expected performance, design attributes, materials, design evaluation, manufacture, sterilization, packing, and manufacturer information requirements for the total-hip and partial-hip joint prostheses.
Download or read book YY 0118 2005 Translated English of Chinese Standard YY0118 2005 written by https://www.chinesestandard.net and published by https://www.chinesestandard.net. This book was released on 2015-05-25 with total page 27 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Standard specifies the definitions, classification, requirements, test methods, inspection rules, marking, packaging, instructions for use, transportation, storage etc. of total-hip and partial-hip joint replacements.
Download or read book Catalogue written by International Organization for Standardization and published by . This book was released on 2008 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Standards Catalogue written by and published by . This book was released on 1998 with total page 1114 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Determination of Endurance Properties of Stemmed Femoral Components written by and published by . This book was released on 2010 with total page 13 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Comprehensive Biomaterials II written by Kevin Healy and published by Elsevier. This book was released on 2017-05-18 with total page 4865 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive Biomaterials II, Second Edition, Seven Volume Set brings together the myriad facets of biomaterials into one expertly-written series of edited volumes. Articles address the current status of nearly all biomaterials in the field, their strengths and weaknesses, their future prospects, appropriate analytical methods and testing, device applications and performance, emerging candidate materials as competitors and disruptive technologies, research and development, regulatory management, commercial aspects, and applications, including medical applications. Detailed coverage is given to both new and emerging areas and the latest research in more traditional areas of the field. Particular attention is given to those areas in which major recent developments have taken place. This new edition, with 75% new or updated articles, will provide biomedical scientists in industry, government, academia, and research organizations with an accurate perspective on the field in a manner that is both accessible and thorough. Reviews the current status of nearly all biomaterials in the field by analyzing their strengths and weaknesses, performance, and future prospects Covers all significant emerging technologies in areas such as 3D printing of tissues, organs and scaffolds, cell encapsulation; multimodal delivery, cancer/vaccine - biomaterial applications, neural interface understanding, materials used for in situ imaging, and infection prevention and treatment Effectively describes the many modern aspects of biomaterials from basic science, to clinical applications
Download or read book BSI Standards Catalogue written by and published by . This book was released on 1997 with total page 1110 pages. Available in PDF, EPUB and Kindle. Book excerpt:
