Download or read book Organic Selective Contacts for Crystalline Silicon Solar Cells written by Marc-Uwe Halbich and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Towards Hybrid Heterojunction Silicon Solar Cells with Organic Charge Carrier Selective Contacts written by Sara Lisa Jäckle and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Silicon Heterojunction Solar Cells written by W.R. Fahrner and published by Trans Tech Publications Ltd. This book was released on 2006-08-15 with total page 208 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world of today must face up to two contradictory energy problems: on the one hand, there is the sharply growing consumer demand in countries such as China and India. On the other hand, natural resources are dwindling. Moreover, many of those countries which still possess substantial gas and oil supplies are politically unstable. As a result, renewable natural energy sources have received great attention. Among these, solar-cell technology is one of the most promising candidates. However, there still remains the problem of the manufacturing costs of such cells. Many attempts have been made to reduce the production costs of “conventional” solar cells (manufactured from monocrystalline silicon using diffusion methods) by instead using cheaper grades of silicon, and simpler pn-junction fabrication. That is the ‘hero’ of this book; the heterojunction solar cell.

Download or read book Titanium oxide based Electron selective Contacts to Crystalline Silicon Characterization and Application to Solar Cells written by Valeriya Titova and published by . This book was released on 2021 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Materials Concepts For Solar Cells Second Edition written by Thomas Dittrich and published by World Scientific Publishing Company. This book was released on 2018-01-30 with total page 568 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern challenge is for solar cell materials to enable the highest solar energy conversion efficiencies, at costs as low as possible, and at an energy balance as sustainable as necessary in the future. This textbook explains the principles, concepts and materials used in solar cells. It combines basic knowledge about solar cells and the demanded criteria for the materials with a comprehensive introduction into each of the four classes of materials for solar cells, i.e. solar cells based on crystalline silicon, epitaxial layer systems of III-V semiconductors, thin-film absorbers on foreign substrates, and nano-composite absorbers. In this sense, it bridges a gap between basic literature on the physics of solar cells and books specialized on certain types of solar cells.The last five years had several breakthroughs in photovoltaics and in the research on solar cells and solar cell materials. We consider them in this second edition. For example, the high potential of crystalline silicon with charge-selective hetero-junctions and alkaline treatments of thin-film absorbers, based on chalcopyrite, enabled new records. Research activities were boosted by the class of hybrid organic-inorganic metal halide perovskites, a promising newcomer in the field.This is essential reading for students interested in solar cells and materials for solar cells. It encourages students to solve tasks at the end of each chapter. It has been well applied for postgraduate students with background in materials science, engineering, chemistry or physics.

Download or read book Evaluation of Transition Metal Oxide as Carrier selective Contacts for Silicon Heterojunction Solar Cells written by and published by . This book was released on 2015 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Reducing light absorption in the non-active solar cell layers, while enabling the extraction of the photogenerated minority carriers at quasi-Fermi levels are two key factors to improve current generation and voltage, and therefore efficiency of silicon heterojunction solar devices. To address these two critical aspects, transition metal oxide materials have been proposed as alternative to the n- and p-type amorphous silicon used as electron and hole selective contacts, respectively. Indeed, transition metal oxides such as molybdenum oxide, titanium oxide, nickel oxide or tungsten oxide combine a wide band gap typically over 3 eV with a band structure and theoretical band alignment with silicon that results in high transparency to the solar spectrum and in selectivity for the transport of only one carrier type. Improving carrier extraction or injection using transition metal oxide has been a topic of investigation in the field of organic solar cells and organic LEDs; from these pioneering works a lot of knowledge has been gained on materials properties, ways to control these during synthesis and deposition, and their impact on device performance. Recently, the transfer of some of this knowledge to silicon solar cells and the successful application of some metal oxide to contact heterojunction devices have gained much attention. In this contribution, we investigate the suitability of various transition metal oxide films (molybdenum oxide, titanium oxide, and tungsten oxide) deposited either by thermal evaporation or sputtering as transparent hole or electron selective transport layer for silicon solar cells. In addition to systematically characterize their optical and structural properties, we use photoemission spectroscopy to relate compound stoichiometry to band structure and characterize band alignment to silicon. The direct silicon/metal oxide interface is further analyzed by quasi-steady state photoconductance decay method to assess the quality of surface passivation. In complement, we construct full device structures incorporating in some cases surface passivation schemes, with measured initial conversion efficiency over 15% and evaluate the carrier transport properties using temperature-dependent current-voltage and capacitance-voltage measurements. With this detailed characterization study, we aim at providing the framework to assess the potential of a material as a carrier selective contact and the understanding of how each of the aforementioned parameters on the metal oxide films influence the full solar cell operating performances.

Download or read book Advanced Contacts For Crystalline Silicon Solar Cells written by James Bullock and published by . This book was released on 2016 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mainstream dopant-diffused crystalline silicon (c-Si) solar cells have reached a point in their development where losses at the directly-metalized, heavily-doped regions have a significant, and often limiting effect on device performance. The conventional wisdom on addressing this issue is to drastically reduce the percentage of the contacted surface area-to less than 1% in some cases-significantly increasing the complexity of fabrication. An alternative approach is to focus on addressing the losses at the metal / cSi interface by implementing novel 'carrier-selective' contacting structures. This approach to solar cell contacting has the potential to increase the output power whilst significantly simplifying cell architectures and fabrication procedures. This thesis is centered on the conceptual and experimental development of a number of advanced contacting structures for c-Si solar cells, collectively referred to here as 'heterocontacts'. The 'carrier-selectivity' of the contact, that is, how well it collects just one of the two carriers (whilst preserving the other), is used as a universal concept for comparing different contacting strategies, including mainstream contacts based on direct metallization of heavily doped c-Si. To provide a foundation on this topic the initial section of the thesis discusses the concept and theory of carrier-selectivity. This is complemented with an in depth literature review of current state-of-the-art contacting practices for c-Si solar cells. This provides a reference frame with which to compare the three experimental chapters that follow. In the first experimental chapter it is shown that a suitable initial stepping stone towards advancing solar c-Si cell contacts is to combine the benefits of conventional dopant-diffused regions with those of heterocontacts. A number of such hybrid systems are demonstrated and optimized at the contact level through multiple dedicated studies focused on using thin silicon oxide (SiOx), aluminum oxide (AlOx) or hydrogenated amorphous silicon (a-Si:H) passivating interlayers. These interlayers are shown to reduce carrier recombination at the contact surface by up to two orders of magnitude. In a later study we develop and demonstrate a novel a-Si:H enhanced Al / SiOx / c-Si(n+) heterocontact concept. This structure is also explored at the solar cell level, yielding an efficiency of 21% in the initial stages of development - equivalent to that of an analogous cell made with the conventional directly metallized partial contact technique. In the succeeding chapter, the logical next stage in the development of such a concept is explored, that is, to completely remove the heavily doped surface regions, instead using the heterocontacts exclusively to separate electrons and holes. It is demonstrated that this can be achieved using materials with extreme work functions. For the collection of holes, sub-stoichiometric molybdenum oxide MoOx is utilized, favored for its transparency and large work function. Over multiple studies, it is demonstrated that MoOx heterocontact systems, both with and without passivating interlayers can be used to effectively collect holes on both n and p-type c-Si absorbers. This enables its application to a number of novel solar cells architectures, most prominently a novel MoOx partial rear contact cell attaining conversion efficiencies over 20% in the initial proof-ofconcept stage. In the final experimental chapter, a complementary electron heterocontact system is developed, based on a low work function LiFx / Al electrode. This is shown to provide ix excellent electron collection characteristics, both with and without a-Si:H passivating interlayers. The exceptional contact characteristics enabled by this heterocontact allow the demonstration of a first-of-its-kind n-type partial rear contact cell already with an efficiency above 20% in its first demonstration. To conclude the thesis and demonstrate its premise, a novel c-Si cell is developed without the use of dopants. This cell, referred to as the dopant free asymmetric heterocontact (DASH) cell, combines the previously mentioned MoOx based hole contacts and LiFx based electron heterocontacts, both with passivating a-Si:H interlayers. A conversion efficiency of 19.4% is attained for this proof-of-concept device - an improvement by more than 5 percent absolute from the previous DASH cell record and more importantly the first demonstration of such a concept to be competitive with conventional cell designs.

Download or read book Advanced Nanomaterials for Solar Cells and Light Emitting Diodes written by Feng Gao and published by Elsevier. This book was released on 2019-04-26 with total page 550 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Nanomaterials for Solar Cells and Light Emitting Diodes discusses the importance of nanomaterials as the active layers in solar cells and light emitting diodes (LEDs), along with the progress of nanomaterials as the electron and hole transporting layers. Specifically, the book reviews the use of nano-morphology of polymers, small molecules, and the organic-inorganic perovskites as the active layers in solar cells and LEDs. The design, fabrication and properties of metal-oxide-based nano-structures as electron and hole transporting layers are also reviewed. In addition, the development of plasmonic nanomaterials for solar cells and LEDs is discussed. Each topic in this book includes an overview of the materials system from principles to process. The advantages, disadvantages and related methodologies are highlighted. The book includes applications based on materials and emphasize how to improve the performance of solar cells and LEDs by the materials design, with a focus on nanomaterials. Provides latest research on nanostructured materials including small molecules, polymers, organic-inorganic perovskites, and many other relevant materials systems for solar cells and LEDs Addresses each promising materials system from principles to process, detailing the advantages and disadvantages of the most relevant methods of processing and fabrication Looks ahead to most likely techniques to improve performance of solar cells and light emitting diodes

Download or read book Energy Harvesting and Storage written by M. K. Jayaraj and published by Springer Nature. This book was released on 2022-09-11 with total page 332 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers recent technologies developed for energy harvesting as well as energy storage applications. The book includes the fabrication of optoelectronic devices such as high-efficiency c-Si solar cells, carrier selective c-Si solar cells, quantum dot, and dye-sensitized solar cells, perovskite solar cells, Li-ion batteries, and supercapacitors. Aiming at beginners in the respective areas, the basic principles and mechanism of the optoelectronic phenomena behind every application are detailed in the book. The book offers schematics, tables, graphical representations, and illustrations to enable better understanding. Among the nine chapters, the first four chapters are dedicated to various types of high-efficiency solar cells and the remaining chapters discuss the methods for energy storage such as the fabrication of batteries and supercapacitors. The book is a useful reference for active researchers and academicians working in energy harvesting and energy storage areas.

Download or read book High Efficiency Silicon Solar Cells written by Martin A. Green and published by Trans Tech Publications Ltd. This book was released on 1987-01-01 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: The early chapters comprehensively review the optical and transport properties of silicon. Light trapping is described in detail. Limits on the efficiency of silicon cells are discussed as well as material requirements necessary to approach these limits. The status of current approaches to passifying surfaces, contacts and bulk regions is reviewed. The final section of the book describes the most practical approaches to the fabrication of high-efficiency cells capable of meeting the efficiency targets for both concentrated and non-concentrated sunlight, including a discussion of design and processing approaches for non-crystalline silicon.

Download or read book Organic Solar Cells written by Wolfgang Tress and published by Springer. This book was released on 2014-11-22 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers in a textbook-like fashion the basics or organic solar cells, addressing the limits of photovoltaic energy conversion and giving a well-illustrated introduction to molecular electronics with focus on the working principle and characterization of organic solar cells. Further chapters based on the author’s dissertation focus on the electrical processes in organic solar cells by presenting a detailed drift-diffusion approach to describe exciton separation and charge-carrier transport and extraction. The results, although elaborated on small-molecule solar cells and with focus on the zinc phthalocyanine: C60 material system, are of general nature. They propose and demonstrate experimental approaches for getting a deeper understanding of the dominating processes in amorphous thin-film based solar cells in general. The main focus is on the interpretation of the current-voltage characteristics (J-V curve). This very standard measurement technique for a solar cell reflects the electrical processes in the device. Comparing experimental to simulation data, the author discusses the reasons for S-Shaped J-V curves, the role of charge carrier mobilities and energy barriers at interfaces, the dominating recombination mechanisms, the charge carrier generation profile, and other efficiency-limiting processes in organic solar cells. The book concludes with an illustrative guideline on how to identify reasons for changes in the J-V curve. This book is a suitable introduction for students in engineering, physics, material science, and chemistry starting in the field of organic or hybrid thin-film photovoltaics. It is just as valuable for professionals and experimentalists who analyze solar cell devices.

Download or read book Designing Passivating Carrier Selective Contacts for Photovoltaic Devices written by and published by . This book was released on 2015 with total page 1 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The first step towards building a high-efficiency solar cell is to develop an absorber with few recombination-active defects. Many photovoltaic technologies have already achieved this (monocrystalline Si, III-V materials grown on lattice-matched substrates, perovskites, polycrystalline CdTe and CIGS); those that have not (a-Si:H, organics) have been limited to low open-circuit voltage. The second step is to develop contacts that both inhibit surface recombination and allow for low-resistance collection of either only electrons or only holes. For most photovoltaic technologies, this step is both more difficult and less explored than the first, and we are unaware of a prescribed methodology for selecting materials for contacts to solar cells. We elucidate a unified, conceptual understanding of contacts within which existing contacting schemes can be interpreted and future contacting schemes can be imagined. Whereas a split of the quasi-Fermi levels of holes and electrons is required in the absorber of any solar cell to generate a voltage, carriers are eventually collected through a metallic wire in which no such quasi-Fermi-level split exists. We define a contact to be all layers between the bulk of the absorber and the recombination-active interface through which carriers are extracted. The quasi-Fermi levels must necessarily collapse at this interface, and thus the transition between maximal quasi-Fermi-level splitting (in the absorber) and no splitting occurs entirely in the contact. Depending on the solar cell architecture, the contact will usually extend from the surface of the absorber to the surface of a metal or transparent conductive oxide layer, and may include deposited or diffused doped layers (e.g., as in crystalline and thin-film Si cells) and heterostructure buffer layers (e.g., the CdS layer in a CdTe device). We further define a passivating contact as one that enables high quasi-Fermi-level splitting in the absorber (large "internal" voltage), where "high" is relative to the splitting dictated by bulk recombination. Finally, we define a carrier-selective contact as one that enables a high "external" voltage measured across the contacts, where "high" is relative to the internal voltage. With these definitions, passivating contacts are those that allow only electrons, only holes, or neither electrons or holes to transport from the absorber to any position in the contact that has recombination-active defects. An excellent example of this is a SiNx layer on a Si wafer: the layer removes dangling bonds at the wafer surface (where there are both electrons and holes) and does not allow either carrier type to travel to its outermost surface, where there are undoubtedly defects. Carrier-selective contacts are then passivating contacts that also allow for low-impedance flow of either electrons or holes (but not both) to the recombination-active, extracting interface. The most common example is a heavily doped layer that establishes an electric field at the absorber surface, which then "filters" the carriers that may pass to the contact according to the sign of their charge.

Download or read book Transparent Passivating Contacts for Front Side Application in Crystalline Silicon Solar Cells written by Josua Andreas Stückelberger and published by . This book was released on 2018 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mots-clés de l'auteur: Solar energy ; photovoltaics ; crystalline ; silicon ; passivation ; mixed-phase ; poly-Si ; selective ; oxide ; fluorine.

Download or read book Photovoltaic Solar Energy written by Wilfried van Sark and published by John Wiley & Sons. This book was released on 2024-07-29 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: Photovoltaic Solar Energy Thoroughly updated overview of photovoltaic technology, from materials to modules and systems Volume 2 of Photovoltaic Solar Energy provides fundamental and contemporary knowledge about various photovoltaic technologies in the framework of material science, device physics of solar cells, chemistry for manufacturing, engineering of PV modules, and the design aspects of photovoltaic applications, with the aim of informing the reader about the basic knowledge of each aspect of photovoltaic technologies and applications in the context of the most recent advances in science and engineering. The text is written by leading specialists for each topic in a concise manner and includes the most recent references for deeper study. Moreover, the book gives insights into possible future developments in the field of photovoltaics. The book builds on the success of Volume 1 of Photovoltaic Solar Energy, which was published by Wiley in January 2017. As science and technology is progressing fast in some areas of photovoltaics, several topics needed to be readdressed. Volume 2 also covers some basic aspects of the subject that were not addressed in Volume 1. Sample topics covered in Photovoltaic Solar Energy include: Solar Irradiance Resources Crystalline Silicon Technologies (Cz Ingots, TOPCon, Heterojunction, Passivating contacts, Hydrogenation and Carrier Induced Degradation) Perovskite and Tandem solar cells Characterization and Measurements PV Modules PV Systems and Applications (integration in buildings, agriculture, water, vehicles) Sustainability Providing comprehensive coverage of the subject, Photovoltaic Solar Energy is an essential resource for undergraduate and graduate students in science or engineering, young professionals in PV research or the PV industry, professors, teachers, and PV specialists who want to receive updated information. A scientific or engineering degree is a prerequisite.

Download or read book Fine Line Printed Contacts on Crystalline Silicon Solar Cells written by Matthias Hörteis and published by . This book was released on 2009 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 2015 IEEE 42nd Photovoltaic Specialist Conference PVSC written by IEEE Staff and published by . This book was released on 2015-06-14 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: scientific and engineering technical conference covering all aspects of photovoltaics materials, devices, systems and reliability

Download or read book Optimization of Electron Selective Contacts for Silicon Solar Cells written by Arnau Torrens Dinarès and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Nowadays, one of the most urgent and important problems that humankind has to face is climate change and global warming. One way to approach it, is by changing the way energy is produced from non-renewable sources, such as coal or gas, to renewable sources, like wind or solar power. In this report, the focus is set on solar energy and how to improve the efficiency of photovoltaic solar cells. Titanium nitride (TiNx) is studied as an electron selective contact to possibly substitute magnesium-aluminium (Mg/Al). Several experiments were carried out changing the sputtering deposition conditions such as the concentration of N2 gas used during the deposition or the deposition time. However, the results obtained were not satisfactory enough. A new material, ITO (Indium Tin Oxide) on an electron doped substrate (n+), was also tested and positive results were yielded. A contact resistivity of approximately ?c = 80 m?cm2 was achieved.