Download or read book Supercritical Fluids written by E. Kiran and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercritical fluids are neither gas nor liquid, but can be compressed gradually from low to high density and they are therefore interesting and important as tunable solvents and reaction media in the chemical process industry. By adjusting the density the properties of these fluids can be customised and manipulated for a given process - physical or chemical transformation. Separation and processing using supercritical solvents such as CO2 are currently on-line commercially in the food, essential oils and polymer industries. Many agencies and industries are considering the use of supercritical water for waste remediation. Supercritical fluid chromatography represents another, major analytical application. Significant advances have recently been made in materials processing, ranging from particle formation to the creation of porous materials. The chapters in this book provide tutorial accounts of topical areas centred around: (1) phase equilibria, thermodynamics and equations of state; (2) critical behaviour, crossover effects; (3) transport and interfacial properties; (4) molecular modelling, computer simulation; (5) reactions, spectroscopy; (6) phase separation kinetics; (7) extractions; (8) applications to polymers, pharmaceuticals, natural materials and chromatography; (9) process scale-up.

Download or read book The Glossary of Prosthodontic Terms written by and published by . This book was released on 1994 with total page 80 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Polymer Thin Films written by Ophelia Kwan Chui Tsui and published by World Scientific. This book was released on 2008 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ch. 1. Block copolymer thin films / J.-Y. Wang, S. Park and T. P. Russell -- ch. 2. Equilibration of block copolymer films on chemically patterned surfaces / G. S. W. Craig, H. Kang and P. F. Nealey -- ch. 3. Structure formation and evolution in confined cylinder-forming block copolymers / G. J. A. Sevink and J. G. E. M. Fraaije -- ch. 4. Block copolymer lithography for magnetic device fabrication / J. Y. Cheng and C. A. Ross -- ch. 5. Hierarchical structuring of polymer nanoparticles by self-organization / M. Shimomura ... [et al.] -- ch. 6. Wrinkling polymers for surface structure control and functionality / E. P. Chan and A. J. Crosby -- ch. 7. Crystallization in polymer thin films: morphology and growth / R. M. Van Horn and S. Z. D. Cheng -- ch. 8. Friction at soft polymer surface / M. K. Chaudhury, K. Vorvolakos and D. Malotky -- ch. 9. Relationship between molecular architecture, large-strain mechanical response and adhesive performance of model, block copolymer-based pressure sensitive adhesives / C. Creton and K. R. Shull -- ch. 10. Stability and dewetting of thin liquid films / K. Jacobs, R. Seemann and S. Herminghaus -- ch. 11. Anomalous dynamics of polymer Films / O. K. C. Tsui.

Download or read book Semiconducting Polymers written by Georges Hadziioannou and published by John Wiley & Sons. This book was released on 2006-12-15 with total page 786 pages. Available in PDF, EPUB and Kindle. Book excerpt: Halbleitende Polymere sind ein faszinierendes interdisziplinäres Forschungsgebiet, das kurz vor dem anwendungstechnischen Durchbruch steht. Insbesondere für neue Komponenten in der Photonik und Optoelektronik bieten diese Materialien ein enormes Potential. Dieses zweibändige Handbuch mit Beiträgen herausragender Experten aus den Feldern Organische und Physikalische Chemie, Festkörperphysik bis hin zur Verfahrenstechnik, beschreibt detailliert die Grundlagen, die zum Verständnis und zur Kontrolle dieser faszinierenden Materialien notwendig sind.

Download or read book Aulton s Pharmaceutics written by Michael E. Aulton and published by Elsevier Health Sciences. This book was released on 2013 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Pharmaceutics is the art of pharmaceutical preparations. It encompasses design of drugs, their manufacture and the elimination of micro-organisms from the products. This book encompasses all of these areas."--Provided by publisher.

Download or read book Advances in Elastomers I written by P. M. Visakh and published by Springer Science & Business Media. This book was released on 2013-03-29 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first volume of a two-volume work which summarizes in an edited format and in a fairly comprehensive manner many of the recent technical research accomplishments in the area of Elastomers. “Advances in Elastomers” discusses the various attempts reported on solving these problems from the point of view of the chemistry and the structure of elastomers, highlighting the drawbacks and advantages of each method. It summarize the importance of elastomers and their multiphase systems in human life and industry, and covers all the topics related to recent advances in elastomers, their blends, IPNs, composites and nanocomposites. This first volume focuses on advances on the blends and interpenetrating networks (IPNs) of elastomers.

Download or read book Polyurethane Elastomers written by C. Hepburn and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 458 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this monograph has been to distil into a single volume, in an easily read and assimilated format, the essentials of this often complex technology such that it is usable by all technical and semi-technical people who wish to become their own polyurethane and polyurethane elastomer expert.

Download or read book Mechanical Behavior of Materials written by Marc A. Meyers and published by . This book was released on 2008 with total page 856 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes numerous examples and problems for student practice, this textbook is ideal for courses on the mechanical behaviour of materials taught in departments of mechanical engineering and materials science.

Download or read book Physics of Amphiphilic Layers written by Jacques Meunier and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: Amphiphilic layers play essential roles in the behaviour of a great variety of disperse systems such as micelles, microemulsions and vesicles. They can also exist as isolated mono- or bilayers, or constitute extended liquid crystalline structures. Although the properties of these different systems may at first sight seem unrelated, theoretical interpretations of them depend on several common concepts. This was the reason for bringing together scientists working in this area for the International Winter School on the Physics of Amphiphilic Layers, which was held at Les Houches, 10-18 February, 1987. The topics treated in the proceedings volume are mono- and bilayers, interactive forces between layers (with special emphasis on steric forces), ordered structures (in particular swollen lamellar phases and defects), vesicles, micelles (including polymer-like systems), microemulsions (especially random bicontinuous structures) and porous media. The importance of thermal fluctuations in the amphiphilic layers is stressed. Recent results are presented and literature references allow readers not familiar with the subject to find any background information they require.

Download or read book Polymer Gels written by D. DeRossi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume contains a series of papers originally presented at the Symposium on Polymer Gels organized and sponsored by the Research Group on Polymer Gels,The Society of Polymer Science of Japan and co-sponsored by the Science and Technology Agency (ST A) and MIT!, Japan. The Symposium took place at Tsukuba Science City on 18th and 19th September, 1989. Recognized experts in their fields were invited to speak and there was a strong attendance from government, academic and industrial research centers. The purpose of the Symposium was to review the state of the art and to present and discuss recent progress in the understanding of the behavioral properties of polymer gels and their application to biomedical, environmental and robotic fields. Most of the papers and related discussions concentrated on the swelling behavior of hydrogels and chemomechanical systems, both artificial and naturally occurring, in which external stimuli of a physical or chemical nature control energy transformation or signal transduction. The recent great interest in chemomechanical systems based on polymer gels has stimulated considerable effort towards the development of new sensors and actuators, controllable membrane separation processes, and delivery systems in which the functions of sensing, processing and actuation are all built into the polymeric network device. Artificial chemomechanical systems, through the use of environmentally sensitive polymer gels, are emerging as interesting materials for mimicking basic processes previously only confined to the biological world, and commercially viable applications are also foreseen in the not-too-distant future.

Download or read book Energetic Materials written by Ulrich Teipel and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 643 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incorporation of particular components with specialized properties allows one to tailor the end product's properties. For instance, the sensitivity, burning behavior, thermal or mechanical properties or stability of energetic materials can be affected and even controllably varied through incorporation of such ingredients. This book examines particle technologies as applied to energetic materials such as propellants and explosives, thus filling a void in the literature on this subject. Following an introduction covering general features of energetic materials, the first section of this book describes methods of manufacturing particulate energetic materials, including size reduction, crystallization, atomization, particle formation using supercritical fluids and microencapsulation, agglomeration phenomena, special considerations in mixing explosive particles and the production of nanoparticles. The second section discusses the characterization of particulate materials. Techniques and methods such as particle size analysis, morphology elucidation and the determination of chemical and thermal properties are presented. The wettability of powders and rheological behavior of suspensions and solids are also considered. Furthermore, methods of determining the performance of particular energetic materials are described. Each chapter deals with fundamentals and application possibilities of the various methods presented, with particular emphasis on issues applicable to particulate energetic materials. The book is thus equally relevant for chemists, physicists, material scientists, chemical and mechanical engineers and anyone interested or engaged in particle processing and characterization technologies.

Download or read book Principles of Biomedical Engineering Second Edition written by Sundararajan Madihally and published by Artech House. This book was released on 2019-12-31 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition of an Artech House classic introduces readers to the importance of engineering in medicine. Bioelectrical phenomena, principles of mass and momentum transport to the analysis of physiological systems, the importance of mechanical analysis in biological tissues/ organs and biomaterial selection are discussed in detail. Readers learn about the concepts of using living cells in various therapeutics and diagnostics, compartmental modeling, and biomedical instrumentation. The book explores fluid mechanics, strength of materials, statics and dynamics, basic thermodynamics, electrical circuits, and material science. A significant number of numerical problems have been generated using data from recent literature and are given as examples as well as exercise problems. These problems provide an opportunity for comprehensive understanding of the basic concepts, cutting edge technologies and emerging challenges. Describing the role of engineering in medicine today, this comprehensive volume covers a wide range of the most important topics in this burgeoning field. Moreover, you find a thorough treatment of the concept of using living cells in various therapeutics and diagnostics. Structured as a complete text for students with some engineering background, the book also makes a valuable reference for professionals new to the bioengineering field. This authoritative textbook features numerous exercises and problems in each chapter to help ensure a solid understanding of the material.

Download or read book Modern Aspects of Colloidal Dispersions written by Ronald H. Ottewill and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 315 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the papers presented at a meeting sponsored by the Colloid and Interface Science Group of the Faraday Division, Royal Society of Chemistry, which was held at Wills Hall, University of Bristol from the 14th - 16th April 1997. The pur pose of the meeting, which was entitled Colloidal Dispersions, was to discuss the subject of concentrated colloidal systems including, dispersions, emulsions and powders, in order to emphasize recent advances in experimental and theoretical understanding of these systems and how these advances could be applied to practical utitisation in the wide range of industries which are involved with colloidal systems. The papers presented at the meeting were given by the principal participants in a 5 year project on Colloid Technology, which started on the 1st August 1992, and was funded by the Department of Trade and Industry (DTI) of the U.K. and a consortium of industries which was composed of ICI, Schlumberger, Unilever and Zeneca. The academic centres involved were, the Universities of Bristol, Cambridge, Edinburgh and Imperial College, London. Each of the papers published in this volume formed the focus for a discussion on that topic so that each subject was discussed in so me depth by the participants. J ean Proctor and Meg Staff have been tremendously helpful as secretaries at Bristol and Cambridge respectively throughout the project. Also, their help with the various meetings and with the production of this volume was invaluable. We thank them most warmly for their very able assistance.

Download or read book Polypropylene Handbook written by József Karger-Kocsis and published by Springer. This book was released on 2019-03-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book extensively reviews Polypropylene (PP), the second most widely produced thermoplastic material, having been produced for over 60 years. Its synthesis, processing and application are still accompanied by vigorous R&D developments because the properties of PP are at the borderline between those of commodity and engineering thermoplastics. Readers are introduced to various tacticities and polymorphs of PP, and their effects on structural properties. Further, the book addresses the control of optical properties using nucleants, provides strategies for overcoming the limited cold/impact resistance of PP, examines in detail the effects of recycling, and presents guidelines for the property modification of PPs through foaming, filling and reinforcing with respect to target applications. Special attention is paid to descriptions and models of properties as a function of morphological variables. Last but not least, the book suggests potential practical applications of PP-based systems, especially in the packaging, appliances, building/construction, textile and automotive sectors. Each chapter, written by internationally respected scientists, reflects the current state-of-art in the respective field and offers a vital source of information for students, researchers and engineers interested in the morphology, properties, testing and modeling of PP and PP-based systems. The content is indispensable to the appropriate application of PPs and related composites.

Download or read book Program and abstracts book written by and published by . This book was released on 2001 with total page 176 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Dictionary of Chemical Engineering written by Carl Schaschke and published by OUP Oxford. This book was released on 2014-01-09 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Dictionary of Chemical Engineering is one of the latest additions to the market leading Oxford Paperback Reference series. In over 3,400 concise and authoritative A to Z entries, it provides definitions and explanations for chemical engineering terms in areas including: materials, energy balances, reactions, separations, sustainability, safety, and ethics. Naturally, the dictionary also covers many pertinent terms from the fields of chemistry, physics, biology, and mathematics. Useful entry-level web links are listed and regularly updated on a dedicated companion website to expand the coverage of the dictionary. Comprehensively cross-referenced and complemented by over 60 line drawings, this excellent new volume is the most authoritative dictionary of its kind. It is an essential reference source for students of chemical engineering, for professionals in this field (as well as related disciplines such as applied chemistry, chemical technology, and process engineering), and for anyone with an interest in the subject.

Download or read book Materials for Energy written by Sam Zhang and published by CRC Press. This book was released on 2020-10-05 with total page 529 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses a wide range of material types, such as nanomaterials, carbonaceous electrocatalysts and electrolytes, thin films, phase change materials, 2D energy materials, triboelectric materials, and membrane materials Describes such applications as flexible energy storage devices, sensors, energy storage batteries, fuel and solar cells, photocatalytic wastewater treatment, and more Aimed at researchers and technologists working to solve alternative energy issues