Download or read book Order Disorder Transformations in Alloys written by H. Warlimont and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 554 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains 18 invited contributions to the first Inter national Symposium on Order-Disorder Transformations in Alloys+. They cover the major aspects of this group of phase transformations. Although structural order-disorder transformations have been investigated for over 50 years the invited papers, the research papers - whose titles and authors are listed in the appendix - and the discussions at the Symposium have demonstrated very active continued interest and con siderable recent progress in the subject. This is true for theoretical work as weIl as for experimental studies and for the development of materials whose properties result from order-disorder transformations. + Some major national conferences on ordering were held in the USA and in the USSR in recent years; the proceedings are available in the following pUblications: Local Atomic Arrangements Studied by X-Ray Diffraction, Gordon & Breach, New York 1966 2 Ordered Alloys, Claitor's Publ. Div. , Baton Rouge, La. 1970 3 Summaries of the Proceedings of the 2nd Union Conference on Atomic Ordering and its Influence on the Properties of Alloys, Naukova Dumka, Kiev 1966 4 Atomic Ordering and its Influence on the Properties of Alloys, Naukova Dumka, Kiev 1968 5 Atomic Ordering and its Influence on the Properties of Alloys, TGU, Tomsk 1973 111 In assembling these papers it vas attempted to compile a systematic and approximately complete compendium of the sUbject.
Download or read book The Theory of Transformations in Metals and Alloys written by John Christian and published by Newnes. This book was released on 2002-12-10 with total page 1202 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work is a classic reference text for metallurgists, material scientists and crystallographers. The first edition was published in 1965. The first part of that edition was revised and re-published in 1975 and again in 1981. The present two-part set represents the eagerly awaited full revision by the author of his seminal work, now published as Parts I and II. Professor Christian was one of the founding fathers of materials science and highly respected worldwide. The new edition of his book deserves a place on the bookshelf of every materials science and engineering department. Suitable thermal and mechanical treatments will produce extensive rearrangements of the atoms in metals and alloys, and corresponding marked variations in physical and chemical properties. This book describes how such changes in the atomic configuration are effected, and discusses the associated kinetic and crystallographic features. It deals with areas such as lattice geometry, point defects, dislocations, stacking faults, grain and interphase boundaries, solid solutions, diffusion, etc. The first part covers the general theory while the second part is concerned with descriptions of specific types of transformations.
Download or read book The Encyclopedia of Mineralogy written by Keith Frye and published by Springer Science & Business Media. This book was released on 1981-12-31 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Encyclopedia of Mineralogy provides comprehensive, basic treatment of the science of mineralogy. More than 140 articles by internationally known scholars and research workers describe specific areas of mineralogical interest, and a glossary of 3000 entries defines all valid mineral species and many related mineral names. In addition to traditional topics - descriptions of major structural groups, methods of mineral analysis, and the paragenesis of mineral species - this volume embraces such subjects as asbestiform minerals, minerals found in caves and in living beings, and gems and gemology. It includes current data on the latest in our geological inventories - lunar minerals. It describes the properties, characteristics, and uses of industrial resources such as abrasive materials and Portland cement. A directory will guide traveling mineralogists to the major mineralogical museums of the world, with their special interests noted. Clear technical illustrations supplement the text throughout. To help the student and professional find particular information there are a comprehensive subject index, extensive cross-references of related topics (whether in this volume or others in the series), and reference lists to background information and detailed advanced treatment of all topics. The Encyclopedia of Mineralogy is a valuable reference and source for professionals in all geological sciences, for science teachers at all levels, for collectors and `rock hounds', and for all who are curious about the minerals on earth or those brought back from outer space.
Download or read book Phase Transformations written by Srikumar Banerjee and published by Elsevier. This book was released on 2010-05-31 with total page 837 pages. Available in PDF, EPUB and Kindle. Book excerpt: The terms phase transitions and phase transformations are often used in an interchangeable manner in the metallurgical literature. In Phase Transformations, transformations driven by pressure changes, radiation and deformation and those occurring in nanoscale multilayers are brought to the fore. Order-disorder transformations, many of which constitute very good examples of continuous transformations, are dealt with in a comprehensive manner. Almost all types of phase transformations and reactions that are commonly encountered in inorganic materials are covered and the underlying thermodynamic, kinetic and crystallographic aspects elucidated. - Shows readers the advancements in the field - due to enhanced computing power and superior experimental capability - Drawing upon the background and the research experience of the authors, bringing together a wealth of experience - Written essentially from a physical metallurgists view point
Download or read book Reconstructive Phase Transitions written by Pierre Toldano and published by World Scientific. This book was released on 1996 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with the phenomenological theory of first-order structural phase transitions, with a special emphasis on reconstructive transformations in which a group-subgroup relationship between the symmetries of the phases is absent. It starts with a unified presentation of the current approach to first-order phase transitions, using the more recent results of the Landau theory of phase transitions and of the theory of singularities. A general theory of reconstructive phase transitions is then formulated, in which the structures surrounding a transition are expressed in terms of density-waves, providing a natural definition of the transition order-parameters, and a description of the corresponding phase diagrams and relevant physical properties. The applicability of the theory is illustrated by a large number of concrete examples pertaining to the various classes of reconstructive transitions: allotropic transformations of the elements, displacive and order-disorder transformations in metals, alloys and related structures, crystal-quasicrystal transformations.
Download or read book The Theory of Order disorder in Alloys written by Mikhail Aleksandrovich Krivoglaz and published by . This book was released on 1965 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Effect of Crystal Transformation and Atomic Ordering on Friction and Wear of Two Cobalt base Alloys in Vacuum written by William A. Brainard and published by . This book was released on 1968 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: The effect of crystal and order-disorder transformations on friction and wear for Be-Co and FeCo alloys were studied in sliding friction experiments in vacuum at elevated temperatures. The results show that friction increases fourfold for the beryllium-cobalt alloy during transformation and that friction remains high until the reverse or cooling transformation occurs. The friction and wear of Be-Co are markedly superior to 440-C stainless steel. The order-disorder transformation in FeCo increases friction by a factor of 30 and also significantly increases wear. Increased sliding speed and loading affect the transformation. The friction behavior during heating is in good agreement with the type of order-temperature relation in FeCo.
Download or read book Applied Crystallography Proceedings Of The Xvii International Conference written by Danuta Stroz and published by World Scientific. This book was released on 1998-08-06 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings volume contains research data on structural investigation of materials of high industrial value. In particular, the following issues are discussed: phase characterization by diffraction methods, application of direct methods for solving crystal structure from powder diffraction, electron crystallography, Rietveld method application, defects and substructure analysis in materials, new X-ray methods, small angle scattering studies of crystalline and amorphous solids, phase transformation studies including crystallography of the reversible martensitic transformation, structure of noncrystalline materials, structure and properties of new materials.
Download or read book Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Water Reactors written by John H. Jackson and published by Springer. This book was released on 2018-12-20 with total page 2460 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set represents a collection of papers presented at the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. The purpose of this conference series is to foster an exchange of ideas about problems and their remedies in water-cooled nuclear power plants of today and the future. Contributions cover problems facing nickel-based alloys, stainless steels, pressure vessel and piping steels, zirconium alloys, and other alloys in water environments of relevance. Components covered include pressure boundary components, reactor vessels and internals, steam generators, fuel cladding, irradiated components, fuel storage containers, and balance of plant components and systems.
Download or read book Encyclopedia of the Alkaline Earth Compounds written by Richard C. Ropp and published by Newnes. This book was released on 2012-12-31 with total page 1201 pages. Available in PDF, EPUB and Kindle. Book excerpt: Encyclopedia of the Alkaline Earth Compounds is a compilation describing the physical and chemical properties of all of the alkaline earth compounds that have been elucidated to date in the scientific literature. These compounds are used in applications such as LEDs and electronic devices such as smart phones and tablet computers. Preparation methods for each compound are presented to show which techniques have been successful. Structures and phase diagrams are presented where applicable to aid in understanding the complexities of the topics discussed. With concise descriptions presenting the chemical, physical and electrical properties of any given compound, this subject matter will serve as an introduction to the field. This compendium is vital for students and scientific researchers in all fields of scientific endeavors, including non-chemists. 2013 Honorable Mention in Chemistry & Physics from the Association of American Publishers' PROSE Awards Presents a systematic coverage of all known alkaline earth inorganic compounds and their properties Provides a clear, consistent presentation based on groups facilitatating easy comparisons Includes the structure of all the compounds in high quality full-color graphics Summarizes all currently known properties of the transition metals compounds Lists the uses and applications of these compounds in electronics, energy, and catalysis
Download or read book Ordering and Disordering in Alloys written by A.R. Yavari and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Proceedings of the European Workshop on Ordering and Disordering held in Grenoble, France, 10-12 July 1991.
Download or read book Effects of Radiation on Materials written by Roger E. Stoller and published by ASTM International. This book was released on 1992 with total page 1315 pages. Available in PDF, EPUB and Kindle. Book excerpt: Symposium held in Nashville, Tennessee, June 1990. Almost two-thirds of these 91 papers are authored by researchers outside of the US (including information on research in the former USSR, Japan, and Europe). Topics include: current commercial power reactor systems; microstructural characterization
Download or read book Methods for Phase Diagram Determination written by Ji-Cheng Zhao and published by Elsevier. This book was released on 2011-05-05 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: Phase diagrams are "maps" materials scientists often use to design new materials. They define what compounds and solutions are formed and their respective compositions and amounts when several elements are mixed together under a certain temperature and pressure. This monograph is the most comprehensive reference book on experimental methods for phase diagram determination. It covers a wide range of methods that have been used to determine phase diagrams of metals, ceramics, slags, and hydrides.* Extensive discussion on methodologies of experimental measurements and data assessments * Written by experts around the world, covering both traditional and combinatorial methodologies* A must-read for experimental measurements of phase diagrams
Download or read book X Ray Diffraction written by C. Suryanarayana and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 275 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this, the only book available to combine both theoretical and practical aspects of x-ray diffraction, the authors emphasize a "hands on" approach through experiments and examples based on actual laboratory data. Part I presents the basics of x-ray diffraction and explains its use in obtaining structural and chemical information. In Part II, eight experimental modules enable the students to gain an appreciation for what information can be obtained by x-ray diffraction and how to interpret it. Examples from all classes of materials -- metals, ceramics, semiconductors, and polymers -- are included. Diffraction patterns and Bragg angles are provided for students without diffractometers. 192 illustrations.
Download or read book Phase Transformations in Metals and Alloys written by David A. Porter and published by . This book was released on 1981 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1975 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Statics and Dynamics of Alloy Phase Transformations written by Patrice E.A. Turchi and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: The study of phase transformations in substitutional alloys, including order disorder phenomena and structural transformations, plays a crucial role in understanding the physical and mechanical properties of materials, and in designing alloys with desired technologically important characteristics. Indeed, most of the physical properties, including equilibrium properties, transport, magnetic, vibrational as well as mechanical properties of alloys are often controlled by and are highly sensitive to the existence of ordered compounds and to the occurrence of structural transformations. Correspondingly, the alloy designer facing the task of processing new high-performance materials with properties that meet specific industrial applications must answer the following question: What is the crystalline structure and the atomic configuration that an alloy may exhibit at given temperature and concentration? Usually the answer is sought in the phase-diagram of a relevant system that is often determined experimentally and does not provide insight to the underlying mechanisms driving phase stability. Because of the rather tedious and highly risky nature of developing new materials through conventional metallurgical techniques, a great deal of effort has been expended in devising methods for understanding the mechanisms contrOlling phase transformations at the microscopic level. These efforts have been bolstered through the development of fully ab initio, accurate theoretical models, coupled with the advent of new experimental methods and of powerful supercomputer capabilities.
