Download or read book Orbiter Cold Plate Intergranular Corrosion written by Stephen W. Smith and published by . This book was released on 2002 with total page 38 pages. Available in PDF, EPUB and Kindle. Book excerpt: During pre-servicing of a space shuttle (orbiter vehicle, OV-102), helium leak detection of an avionics cold plate identified a leak located in the face sheet oriented towards the support shelf. Subsequent destructive examination of the leaking cold plate revealed that intergranular corrosion had penetrated the 0.017-inch thick aluminum (AA6061) face sheet. The intergranular attack (IGA) was likely caused by an aggressive crevice environment created by condensation of water vapor between the cold plate and support shelf. Face sheet susceptibility to IGA is a result of the brazing process used in the fabrication ofthe cold plates. Cold plate components were brazed at 1000°F followed by a slow cooling process to avoid distortion of the bonded cold plate. The slow cool process caused excessive grain boundary precipitation resulting in a material that is susceptible to IGA. orbiter cold plates.
Download or read book Review of Progress in Quantitative Nondestructive Evaluation written by Donald O. Thompson and published by American Inst. of Physics. This book was released on 2003-04-04 with total page 1004 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers in this proceedings volume were peer-reviewed before acceptance. The Review of Progress in Quantitative NDE has established itself as the world's leading forum for the presentation of research and early engineering demonstrations in quantitative nondestructive evaluation. It is international in scope and broadly interdisciplinary in content covering recent developments in measuring techniques (ultrasonics, electromagnetics, x-rays, thermal, acoustic emission, etc.) and their applications to materials characterization and structural integrity.
Download or read book Aerospace Alloys written by Stefano Gialanella and published by Springer Nature. This book was released on 2019-10-30 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an up-to-date overview on the main classes of metallic materials currently used in aeronautical structures and propulsion engines and discusses other materials of potential interest for structural aerospace applications. The coverage encompasses light alloys such as aluminum-, magnesium-, and titanium-based alloys, including titanium aluminides; steels; superalloys; oxide dispersion strengthened alloys; refractory alloys; and related systems such as laminate composites. In each chapter, materials properties and relevant technological aspects, including processing, are presented. Individual chapters focus on coatings for gas turbine engines and hot corrosion of alloys and coatings. Readers will also find consideration of applications in aerospace-related fields. The book takes full account of the impact of energy saving and environmental issues on materials development, reflecting the major shifts that have occurred in the motivations guiding research efforts into the development of new materials systems. Aerospace Alloys will be a valuable reference for graduate students on materials science and engineering courses and will also provide useful information for engineers working in the aerospace, metallurgical, and energy production industries.
Download or read book Columbia Crew Survival Investigation Report written by Nasa and published by PDQ Press. This book was released on 2009 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: NASA commissioned the Columbia Accident Investigation Board (CAIB) to conduct a thorough review of both the technical and the organizational causes of the loss of the Space Shuttle Columbia and her crew on February 1, 2003. The accident investigation that followed determined that a large piece of insulating foam from Columbia's external tank (ET) had come off during ascent and struck the leading edge of the left wing, causing critical damage. The damage was undetected during the mission. The Columbia accident was not survivable. After the Columbia Accident Investigation Board (CAIB) investigation regarding the cause of the accident was completed, further consideration produced the question of whether there were lessons to be learned about how to improve crew survival in the future. This investigation was performed with the belief that a comprehensive, respectful investigation could provide knowledge that can protect future crews in the worldwide community of human space flight. Additionally, in the course of the investigation, several areas of research were identified that could improve our understanding of both nominal space flight and future spacecraft accidents. This report is the first comprehensive, publicly available accident investigation report addressing crew survival for a human spacecraft mishap, and it provides key information for future crew survival investigations. The results of this investigation are intended to add meaning to the sacrifice of the crew's lives by making space flight safer for all future generations.
Download or read book Materials and Processes written by Barrie D. Dunn and published by Springer. This book was released on 2015-12-29 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to assist scientists and engineers select the ideal material or manufacturing process for particular applications; these could cover a wide range of fields, from light-weight structures to electronic hardware. The book will help in problem solving as it also presents more than 100 case studies and failure investigations from the space sector that can, by analogy, be applied to other industries. Difficult-to-find material data is included for reference. The sciences of metallic (primarily) and organic materials presented throughout the book demonstrate how they can be applied as an integral part of spacecraft product assurance schemes, which involve quality, material and processes evaluations, and the selection of mechanical and component parts. In this successor edition, which has been revised and updated, engineering problems associated with critical spacecraft hardware and the space environment are highlighted by over 500 illustrations including micrographs and fractographs. Space hardware captured by astronauts and returned to Earth from long durations in space are examined. Information detailed in the Handbook is applicable to general terrestrial applications including consumer electronics as well as high reliability systems associated with aeronautics, medical equipment and ground transportation. This Handbook is also directed to those involved in maximizing the relia bility of new materials and processes for space technology and space engineering. It will be invaluable to engineers concerned with the construction of advanced structures or mechanical and electronic sub-systems.
Download or read book Metals Handbook Corrosion written by ASM International. Handbook Committee and published by . This book was released on 1978 with total page 1440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ASM Handbook written by Lawrence J. Korb and published by . This book was released on 1987 with total page 1440 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ignition written by John Drury Clark and published by Rutgers University Press. This book was released on 2018-05-23 with total page 217 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly reissued debut book in the Rutgers University Press Classics Imprint is the story of the search for a rocket propellant which could be trusted to take man into space. This search was a hazardous enterprise carried out by rival labs who worked against the known laws of nature, with no guarantee of success or safety. Acclaimed scientist and sci-fi author John Drury Clark writes with irreverent and eyewitness immediacy about the development of the explosive fuels strong enough to negate the relentless restraints of gravity. The resulting volume is as much a memoir as a work of history, sharing a behind-the-scenes view of an enterprise which eventually took men to the moon, missiles to the planets, and satellites to outer space. A classic work in the history of science, and described as “a good book on rocket stuff…that’s a really fun one” by SpaceX founder Elon Musk, readers will want to get their hands on this influential classic, available for the first time in decades.
Download or read book Corrosion written by Joseph R. Davis and published by ASM International. This book was released on 2000 with total page 563 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the title suggests, this is an introductory book covering the basics of corrosion. It is intended primarily for professionals who are not corrosion experts, but may also be useful as a quick reference for corrosion engineers. Included in the 12 chapters are discussions of the physical principles and characteristics of corrosion, help in recognizing and preventing corrosion, and techniques for diagnosing corrosion failures.
Download or read book ASM Handbook written by ASM International. Handbook Committee and published by ASM International(OH). This book was released on 2000 with total page 1242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This index eliminates that need to search through multiple back-of-the-book indexes to find where a subject is addressed. The A-to-Z listing will help users find important handbook content in volumes where they may not have thought to look.
Download or read book Aerospace Materials and Applications written by Biliyar N. Bhat and published by . This book was released on 2018 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: "The present volume is focused on documenting the novel processing, fabrication, characterization, and testing approaches that are unique to aerospace materials/structures/systems"--Preface.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1990 with total page 1002 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Materials Handbook written by John A. Vaccari and published by McGraw Hill Professional. This book was released on 2002-07-09 with total page 1244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Materials Handbook is an encyclopedic, A-to-Z organization of all types of materials, featuring their key performance properties, principal characteristics and applications in product design. Materials include ferrous and nonferrous metals, plastics, elastomers, ceramics, woods, composites, chemicals, minerals, textiles, fuels, foodstuffs and natural plant and animal substances --more than 13,000 in all. Properties are expressed in both U.S. customary and metric units and a thorough index eases finding details on each and every material. Introduced in 1929 and often known simply as "Brady's," this comprehensive, one-volume, 1244 page encyclopedia of materials is intended for executives, managers, supervisors, engineers, and technicians, in engineering, manufacturing, marketing, purchasing and sales as well as educators and students. Of the dozens of families of materials updated in the 15th Edition, the most extensive additions pertain to adhesives, activated carbon, aluminides, aluminum alloys, catalysts, ceramics, composites, fullerences, heat-transfer fluids, nanophase materials, nickel alloys, olefins, silicon nitride, stainless steels, thermoplastic elastomers, titanium alloys, tungsten alloys, valve alloys and welding and hard-facing alloys. Also widely updated are acrylics, brazing alloys, chelants, biodegradable plastics, molybdenum alloys, plastic alloys, recyclate plastics, superalloys, supercritical fluids and tool steels. New classes of materials added include aliphatic polyketones, carburizing secondary-hardening steels and polyarylene ether benzimidazoles. Carcinogens and materials likely to be cancer-causing in humans are listed for the first time.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1984 with total page 1134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Composite Materials written by Kamal K. Kar and published by Springer. This book was released on 2016-10-14 with total page 694 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite materials are used as substitutions of metals/traditional materials in aerospace, automotive, civil, mechanical and other industries. The present book collects the current knowledge and recent developments in the characterization and application of composite materials. To this purpose the volume describes the outstanding properties of this class of advanced material which recommend it for various industrial applications.
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1990-03 with total page 1040 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Functionally Graded Materials in the 21st Century written by Kiyoshi Ichikawa and published by Springer Science & Business Media. This book was released on 2001 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In a Functionally Graded Material (FGM), which is a kind of advanced composite materials, the composition and structure change gradually over volume, resulting in corresponding changes in the properties of the material. By appyling the possibilities inherent in the concept of FGM, it is anticipated that materials will be improved and new functions for them will be also created. A comprehensive description of status of the art and perspectives, modeling and simulation, processing and system, characterization of properties as well as applications of FGMs is covered in this book."--Jacket.
