Download or read book Optimization of Trustworthy Biomolecular Quantitative Analysis Using Cyber Physical Microfluidic Platforms written by Mohamed Ibrahim and published by CRC Press. This book was released on 2020-05-31 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: A microfluidic biochip is an engineered fluidic device that controls the flow of analytes, thereby enabling a variety of useful applications. According to recent studies, the fields that are best set to benefit from the microfluidics technology, also known as lab-on-chip technology, include forensic identification, clinical chemistry, point-of-care (PoC) diagnostics, and drug discovery. The growth in such fields has significantly amplified the impact of microfluidics technology, whose market value is forecast to grow from $4 billion in 2017 to $13.2 billion by 2023. The rapid evolution of lab-on-chip technologies opens up opportunities for new biological or chemical science areas that can be directly facilitated by sensor-based microfluidics control. For example, the digital microfluidics-based ePlex system from GenMarkDx enables automated disease diagnosis and can bring syndromic testing near patients everywhere. However, as the applications of molecular biology grow, the adoption of microfluidics in many applications has not grown at the same pace, despite the concerted effort of microfluidic systems engineers. Recent studies suggest that state-of-the-art design techniques for microfluidics have two major drawbacks that need to be addressed appropriately: (1) current lab-on-chip systems were only optimized as auxiliary components and are only suitable for sample-limited analyses; therefore, their capabilities may not cope with the requirements of contemporary molecular biology applications; (2) the integrity of these automated lab-on-chip systems and their biochemical operations are still an open question since no protection schemes were developed against adversarial contamination or result-manipulation attacks. Optimization of Trustworthy Biomolecular Quantitative Analysis Using Cyber-Physical Microfluidic Platforms provides solutions to these challenges by introducing a new design flow based on the realistic modeling of contemporary molecular biology protocols. It also presents a microfluidic security flow that provides a high-level of confidence in the integrity of such protocols. In summary, this book creates a new research field as it bridges the technical skills gap between microfluidic systems and molecular biology protocols but it is viewed from the perspective of an electronic/systems engineer.
Download or read book Distributed Optimization for Smart Cyber Physical Networks written by Giuseppe Notarstefano and published by . This book was released on 2019-12-11 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: In an increasingly connected world, the term cyber-physical networks has been coined to refer to the communication among devices that is turning smart devices into smart (cooperating) systems. The distinctive feature of such systems is that significant advantage can be obtained if its interconnected, complex nature is exploited. Several challenges arising in cyber-physical networks can be stated as optimization problems. Examples are estimation, decision, learning and control applications. In cyber-physical networks, the goal is to design algorithms, based on the exchange of information among the processors, that take advantage of the aggregated computational power. Distributed Optimization for Smart Cyber-Physical Networks provides a comprehensive overview of the most common approaches used to design distributed optimization algorithms, together with the theoretical analysis of the main schemes in their basic version. It identifies and formalizes classes of problem set-ups that arise in motivating application scenarios. For each set-up, in order to give the main tools for analysis, tailored distributed algorithms in simplified cases are reviewed. Extensions and generalizations of the basic schemes are also discussed at the end of each chapter. Distributed Optimization for Smart Cyber-Physical Networks provides the reader with an accessible overview of the current research and gives important pointers towards new developments. It is an excellent starting point for research and students unfamiliar with the topic.
Download or read book Digital Microfluidic Biochips written by Krishnendu Chakrabarty and published by CRC Press. This book was released on 2018-10-03 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Microfluidic Biochips focuses on the automated design and production of microfluidic-based biochips for large-scale bioassays and safety-critical applications. Bridging areas of electronic design automation with microfluidic biochip research, the authors present a system-level design automation framework that addresses key issues in the design, analysis, and testing of digital microfluidic biochips. The book describes a new generation of microfluidic biochips with more complex designs that offer dynamic reconfigurability, system scalability, system integration, and defect tolerance. Part I describes a unified design methodology that targets design optimization under resource constraints. Part II investigates cost-effective testing techniques for digital microfluidic biochips that include test resource optimization and fault detection while running normal bioassays. Part III focuses on different reconfiguration-based defect tolerance techniques designed to increase the yield and dependability of digital microfluidic biochips. Expanding upon results from ongoing research on CAD for biochips at Duke University, this book presents new design methodologies that address some of the limitations in current full-custom design techniques. Digital Microfluidic Biochips is an essential resource for achieving the integration of microfluidic components in the next generation of system-on-chip and system-in-package designs.
Download or read book Factories of the Future written by Tullio Tolio and published by Springer. This book was released on 2019-02-14 with total page 490 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is open access under a CC BY 4.0 license.This book presents results relevant in the manufacturing research field, that are mainly aimed at closing the gap between the academic investigation and the industrial application, in collaboration with manufacturing companies. Several hardware and software prototypes represent the key outcome of the scientific contributions that can be grouped into five main areas, representing different perspectives of the factory domain:1) Evolutionary and reconfigurable factories to cope with dynamic production contexts characterized by evolving demand and technologies, products and processes.2) Factories for sustainable production, asking for energy efficiency, low environmental impact products and processes, new de-production logics, sustainable logistics.3) Factories for the People who need new kinds of interactions between production processes, machines, and human beings to offer a more comfortable and stimulating working environment.4) Factories for customized products that will be more and more tailored to the final user’s needs and sold at cost-effective prices.5) High performance factories to yield the due production while minimizing the inefficiencies caused by failures, management problems, maintenance.This books is primarily targeted to academic researchers and industrial practitioners in the manufacturing domain.
Download or read book Biochip Technology written by Jing Cheng and published by CRC Press. This book was released on 2003-09-02 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biochip technology has experienced explosive growth in recent years and Biochip technology describes the basic manufacturing and fabrication processes and the current range of applications of these chips. Top scientists from the biochip industry and related areas explain the diverse applications of biochips in gene sequencing, expression monitoring, disease diagnosis, tumor examination, ligand assay and drug discovery.
Download or read book Integrated Circuit Fabrication written by Shubham Kumar and published by CRC Press. This book was released on 2021-04-28 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book covers theoretical and practical aspects of all major steps in the fabrication sequence. This book can be used conveniently in a semester length course on integrated circuit fabrication. This text can also serve as a reference for practicing engineer and scientist in the semiconductor industry. IC Fabrication are ever demanding of technology in rapidly growing industry growth opportunities are numerous. A recent survey shows that integrated circuit currently outnumber humans in UK, USA, India and China. The spectacular advances in the development and application of integrated circuit technology have led to the emergence of microelectronic process engineering as an independent discipline. Integrated circuit fabrication text books typically divide the fabrication sequence into a number of unit processes that are repeated to form the integrated circuit. The effect is to give the book an analysis flavor: a number of loosely related topics each with its own background material. Note: T& F does not sell or distribute the Hardback in India, Pakistan, Nepal, Bhutan, Bangladesh and Sri Lanka.
Download or read book Converging Technologies for Improving Human Performance written by Mihail C. Roco and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 477 pages. Available in PDF, EPUB and Kindle. Book excerpt: M. C. Roco and W.S. Bainbridge In the early decades of the 21st century, concentrated efforts can unify science based on the unity of nature, thereby advancing the combination of nanotechnology, biotechnology, information technology, and new technologies based in cognitive science. With proper attention to ethical issues and societal needs, converging in human abilities, societal technologies could achieve a tremendous improvement outcomes, the nation's productivity, and the quality of life. This is a broad, cross cutting, emerging and timely opportunity of interest to individuals, society and humanity in the long term. The phrase "convergent technologies" refers to the synergistic combination of four major "NBIC" (nano-bio-info-cogno) provinces of science and technology, each of which is currently progressing at a rapid rate: (a) nanoscience and nanotechnology; (b) biotechnology and biomedicine, including genetic engineering; (c) information technology, including advanced computing and communications; (d) cognitive science, including cognitive neuroscience. Timely and Broad Opportunity. Convergence of diverse technologies is based on material unity at the nanoscale and on technology integration from that scale.
Download or read book Advanced Controls for Intelligent Buildings written by Siddharth Goyal and published by CRC Press. This book was released on 2021-07-04 with total page 270 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses primarily on both technical and business aspects needed to select, design, develop and deploy control application (or product) successfully for multiple components in building systems. Designing and deploying a control application require multiple steps such as sensing, system dynamics modelling, algorithms, and testing. This may involve choosing an appropriate methodology and technique at multiple stages during the development process. Understanding the pros and cons of such techniques, most importantly being aware of practically possible approaches in the entire ecosystem, is critical in choosing the best framework and system application for different parts of building systems. Providing a wide overview of the state-of art in controls and building systems, providing guidance on developing an end-to-end system in relation to business fundamentals (distribution channels, stakeholders, marketing, supply-chain and financial management), the book is ideal for fourth-year control/mechanical/electrical engineering undergraduates, graduate students, and practitioners including business leaders concerned with smart building technology.
Download or read book Micro Nanofluidic Devices for Single Cell Analysis written by Fan-Gang Tseng and published by MDPI. This book was released on 2018-10-04 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a printed edition of the Special Issue "Micro/Nanofluidic Devices for Single Cell Analysis" that was published in Micromachines
Download or read book NanoBioEngineering written by Bhupinder Singh and published by CRC Press. This book was released on 2018-11-02 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this book is to provide the fundamental comprehension of a broad range of topics in an integrated volume such that readership hailing from diverse disciplines can rapidly acquire the necessary background for applying it in pertinent research and development field.
Download or read book Multi Omics for the Understanding of Brain Diseases written by and published by . This book was released on 2021-12-13 with total page 204 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Microfluidics Technology for Diagnostics and Detection written by David Kinahan and published by MDPI. This book was released on 2021-09-06 with total page 123 pages. Available in PDF, EPUB and Kindle. Book excerpt: Microfluidics and lab-on-a-chip have, in recent years, come to the forefront in diagnostics and detection. At point-of-care, in the emergency room, and at the hospital bed or GP clinic, lab-on-a-chip offers the potential to rapidly detect time-critical and life-threatening diseases such as sepsis and bacterial meningitis. Furthermore, portable and user-friendly diagnostic platforms can enable disease diagnostics and detection in resource-poor settings where centralised laboratory facilities may not be available. At point-of-use, microfluidics and lab-on-chip can be applied in the field to rapidly identify plant pathogens, thus reducing the need for damaging broad spectrum pesticides while also reducing food losses. Microfluidics can also be applied to the continuous monitoring of water quality and can support policy-makers and protection agencies in protecting the environment. Perhaps most excitingly, microfluidics also offers the potential to enable entirely new diagnostic tests that cannot be implemented using conventional laboratory tools. Examples of microfluidics at the frontier of new medical diagnostic tests include early detection of cancers through circulating tumour cells (CTCs) and highly sensitive genetic tests using droplet-based digital PCR. This Special Issue on “Advances in Microfluidics Technology for Diagnostics and Detection” aims to gather outstanding research and to carry out comprehensive coverage of all aspects related to microfluidics in diagnostics and detection.
Download or read book Micromixers written by Nam-Trung Nguyen and published by William Andrew. This book was released on 2011-09-17 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ability to mix minute quantities of fluids is critical in a range of recent and emerging techniques in engineering, chemistry and life sciences, with applications as diverse as inkjet printing, pharmaceutical manufacturing, specialty and hazardous chemical manufacturing, DNA analysis and disease diagnosis.The multidisciplinary nature of this field – intersecting engineering, physics, chemistry, biology, microtechnology and biotechnology – means that the community of engineers and scientists now engaged in developing microfluidic devices has entered the field from a variety of different backgrounds.Micromixers is uniquely comprehensive, in that it deals not only with the problems that are directly related to fluidics as a discipline (aspects such as mass transport, molecular diffusion, electrokinetic phenomena, flow instabilities, etc.) but also with the practical issues of fabricating micomixers and building them into microsystems and lab-on-chip assemblies.With practical applications to the design of systems vital in modern communications, medicine and industry this book has already established itself as a key reference in an emerging and important field.The 2e includes coverage of a broader range of fabrication techniques, additional examples of fully realized devices for each type of micromixer and a substantially extended section on industrial applications, including recent and emerging applications. - Introduces the design and applications of micromixers for a broad audience across chemical engineering, electronics and the life sciences, and applications as diverse as lab-on-a-chip, ink jet printing, pharmaceutical manufacturing and DNA analysis - Helps engineers and scientists to unlock the potential of micromixers by explaining both the scientific (microfluidics) aspects and the engineering involved in building and using successful microscale systems and devices with micromixers - The author's applied approach combines experience-based discussion of the challenges and pitfalls of using micromixers, with proposals for how to overcome them
Download or read book Connected Environments for the Internet of Things written by Zaigham Mahmood and published by Springer. This book was released on 2018-01-05 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive text/reference presents a broad-ranging overview of device connectivity in distributed computing environments, supporting the vision of an Internet of Things (IoT). Expert perspectives are provided by an international selection of researchers from both industry and academia, covering issues of communication, security, privacy, interoperability, networking, access control, and authentication. In addition to discussing state-of-the-art research and practice, the book includes corporate analyses offering a balanced view of benefits and limitations, and numerous case studies illustrating the challenges and practical solutions. Topics and features: discusses issues of security and privacy in connected environments, with a specific focus on the impact of the IoT paradigm on enterprise information systems; examines the challenges of managing big data in IoT environments, and proposes cloud computing-based solutions to the limitations inherent in the IoT paradigm; suggests approaches to overcome service-level interoperability problems in the IoT environment; introduces a mobile IoT simulator designed to evaluate the behavior of IoT systems, in addition to a novel approach to manage hyper-connectivity in the IoT; describes the use of the Essence framework to model software development methods, and highlights the benefits of integrating data from smart buildings and IoT devices; presents an asymmetric schema matching mechanism for IoT interoperability, and explores the topic of automatic provenance capture at the middleware level; reviews emerging network topologies and communication technologies, and advises on the adoption of a data distribution service as a middleware platform for IoT systems. This practically-oriented volume serves as a complete reference for students, researchers and practitioners of distributed computing, providing insights into the latest approaches, technologies, and frameworks relevant to the IoT environment.
Download or read book Microfluidics for Single Cell Analysis written by Jin-Ming Lin and published by Springer Nature. This book was released on 2019-08-28 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes the various microfluidic-based approaches for single-cell capture, isolation, manipulation, culture and observation, lysis, and analysis. Single-cell analysis reveals the heterogeneities in morphology, functions, composition, and genetic performance of seemingly identical cells, and advances in single-cell analysis can overcome the difficulties arising due to cell heterogeneity in the diagnostics for a targeted model of disease. This book provides a detailed review of the state-of-the-art techniques presenting the pros and cons of each of these methods. It also offers lessons learned and tips from front-line investigators to help researchers overcome bottlenecks in their own studies. Highlighting a number of techniques, such as microfluidic droplet techniques, combined microfluidics-mass-spectrometry systems, and nanochannel sampling, it describes in detail a new microfluidic chip-based live single-cell extractor (LSCE) developed in the editor’s laboratory, which opens up new avenues to use open microfluidics in single-cell extraction, single-cell mass spectrometric analysis, single-cell adhesion analysis and subcellular operations. Serving as both an elementary introduction and advanced guidebook, this book interests and inspires scholars and students who are currently studying or wish to study microfluidics-based cell analysis methods.
Download or read book Microfluidics and Nanofluidics written by Mohsen Sheikholeslami Kandelousi and published by BoD – Books on Demand. This book was released on 2018-08-22 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the present book, various applications of microfluidics and nanofluidics are introduced. Microfluidics and nanofluidics span a broad array of disciplines including mechanical, materials, and electrical engineering, surface science, chemistry, physics and biology. Also, this book deals with transport and interactions of colloidal particles and biomolecules in microchannels, which have great importance to many microfluidic applications, such as drug delivery in life science, microchannel heat exchangers in electronic cooling, and food processing industry. Furthermore, this book focuses on a detailed description of the thermal transport behavior, challenges and implications that involve the development and use of HTFs under the influence of atomistic-scale structures and industrial applications.
Download or read book Omics Technologies and Bio engineering written by Debmalya Barh and published by Academic Press. This book was released on 2017-12-01 with total page 645 pages. Available in PDF, EPUB and Kindle. Book excerpt: Omics Technologies and Bio-Engineering: Towards Improving Quality of Life, Volume 1 is a unique reference that brings together multiple perspectives on omics research, providing in-depth analysis and insights from an international team of authors. The book delivers pivotal information that will inform and improve medical and biological research by helping readers gain more direct access to analytic data, an increased understanding on data evaluation, and a comprehensive picture on how to use omics data in molecular biology, biotechnology and human health care. - Covers various aspects of biotechnology and bio-engineering using omics technologies - Focuses on the latest developments in the field, including biofuel technologies - Provides key insights into omics approaches in personalized and precision medicine - Provides a complete picture on how one can utilize omics data in molecular biology, biotechnology and human health care
