Download or read book Optimization of Supply Chain Management and Facility Location Selection for a Biorefinery written by Ian Michael Bowling and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: If renewable energy and biofuels are to attain success in the market place, each step of their production and the system as a whole must be optimized to increase material and energy efficiency, reduce production cost and create a competitive alternative to fossil fuels. Systems optimization techniques may be applied to product selection, process design and integration, feedstock procurement and supply chain management to improve performance. This work addresses two problems facing a biorefinery: technology selection and feedstock scheduling in the face of varying feedstock supply and cost. Also addressed is the optimization of a biorefinery supply chain with respect to distributed processing of biomass to bio-products via preprocessing hubs versus centralized processing and facility location selection. Two formulations are proposed that present a systematic approach to address each problem. Case studies are included to demonstrate model capabilities for both formulations. The scheduling model results display model sensitivity to feedstock price and transport distance penalized through carbon dioxide emissions. The distributed model shows that hubs may be used to extend the operating radius of a biorefinery and thereby increase profits.
Download or read book Proceedings of the 8th International Conference on Foundations of Computer Aided Process Design written by and published by Elsevier. This book was released on 2014-07-14 with total page 835 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume collects together the presentations at the Eighth International Conference on Foundations of Computer-Aided Process Design, FOCAPD-2014, an event that brings together researchers, educators, and practitioners to identify new challenges and opportunities for process and product design. The chemical industry is currently entering a new phase of rapid evolution. The availability of low-cost feedstocks from natural gas is causing renewed investment in basic chemicals in the OECD, while societal pressures for sustainability and energy security continue to be key drivers in technology development and product selection. This dynamic environment creates opportunities to launch new products and processes and to demonstrate new methodologies for innovation, synthesis and design. FOCAPD-2014 fosters constructive interaction among thought leaders from academia, industry, and government and provides a showcase for the latest research in product and process design. Focuses exclusively on the fundamentals and applications of computer-aided design for the process industries. Provides a fully archival and indexed record of the FOCAPD14 conference Aligns the FOCAPD series with the ESCAPE and PSE series
Download or read book Integrated Biorefineries written by Paul R. Stuart and published by CRC Press. This book was released on 2012-12-10 with total page 877 pages. Available in PDF, EPUB and Kindle. Book excerpt: Integrated Biorefineries: Design, Analysis, and Optimization examines how to create a competitive edge in biorefinery innovation through integration into existing processes and infrastructure. Leading experts from around the world working in design, synthesis, and optimization of integrated biorefineries present the various aspects of this complex process, capturing the state of the art in the advancing bioeconomy. The book defines an integrated biorefinery as a processing facility that transforms biomass into value-added products—from biofuels and biochemicals to food and pharmaceuticals. The chapters cover biorefinery product and process design, supply chains, process analysis, feedstocks, technologies, and policy and environmental analysis. They focus on second-generation feedstocks, including forestry resources, energy crops, agricultural residues, oils, and various waste materials. With the growing interest in sustainability in general and in renewable resources in industrial facilities, biorefineries are likely to play increasingly significant roles and have greater economic, environmental, and societal impact. This book fills an information gap by presenting cutting-edge advances that can effectively guide engineers and decision makers in the synthesis, selection, design, analysis, and optimization of biorefineries.
Download or read book Biomass and Biofuels written by Shibu Jose and published by CRC Press. This book was released on 2015-04-22 with total page 389 pages. Available in PDF, EPUB and Kindle. Book excerpt: The long-held tenets of the energy sector are being rewritten in the twenty-first century. The rise of unconventional oil and gas and of renewables is transforming our economies and improving our understanding of the distribution of the world's energy resources and their impacts. A complete knowledge of the dynamics underpinning energy markets is n
Download or read book Dynamic Optimization Model for a Lignocellulosic Biorefinery Supply Chain written by Joshua Troy Pack and published by . This book was released on 2007 with total page 330 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biomass to Biofuel Supply Chain Design and Planning under Uncertainty written by Mir Saman Pishvaee and published by Academic Press. This book was released on 2020-11-25 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass to Biofuel Supply Chain Design and Planning under Uncertainty: Concepts and Quantitative Methods explores the design and optimization of biomass-to-biofuel supply chains for commercial-scale implementation of biofuel projects by considering the problems and challenges encountered in real supply chains. By offering a fresh approach and discussing a wide range of quantitative methods, the book enables researchers and practitioners to develop hybrid methods that integrate the advantages and features of two or more methods in one decision-making framework for the efficient optimization of biofuel supply chains, especially for complex supply chain models. Combining supply chain management and modeling techniques in a single volume, the book is beneficial for graduate students who no longer need to consult subject-specific books alongside mathematical modeling textbooks. The book consists of two main parts. The first part describes the key components of biofuel supply chains, including biomass production, harvesting, collection, storage, preprocessing, conversion, transportation, and distribution. It also provides a comprehensive review of the concepts, problems, and opportunities associated with biofuel supply chains, such as types and properties of the feedstocks and fuel products, decision-making levels, sustainability concepts, uncertainty analysis and risk management, as well as integration of biomass supply chain with other supply chains. The second part focuses on modeling and optimization of biomass-to-biofuel supply chains under uncertainty, using different quantitative methods to determine optimal design. Proposes a general multi-level framework for the optimal design and operation of biomass-to-biofuel supply chains through quantitative analysis and modeling, including different biomass and waste biomass feedstock, production pathways, technology options, transportation modes, and final products Explores how modeling and optimization tools can be utilized to address sustainability issues in biofuel supply chains by simultaneously assessing and identifying sustainable solutions Presents several case studies with different regional constraints to evaluate the practical applicability of different optimization methods and compares their performance in real-world situations Includes General Algebraic Modeling System (GAMS) codes for solving biomass supply chain optimization problems discussed in different chapters
Download or read book Strategic Planning for the Sustainable Production of Biofuels written by José Maria Ponce-Ortega and published by Elsevier. This book was released on 2019-03-05 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strategic Planning for the Sustainable Production of Biofuels presents several optimization models for the design and planning of sustainable biorefinery supply chains, including issues surrounding the potential of biomass feedstocks in multiple harvesting sites, availability and seasonality of biomass resources, different potential geographical locations for processing plants that produce multiple products using diverse production technologies, economies of scale for production technologies, demands and prices of multiple products, locations of storage facilities, and a number of transportation modes. Sustainability considerations are incorporated into the proposed models by including simultaneous economic, environmental and social performance in the evaluation of the supply chain designs. Covers different optimization models for the strategic planning of biorefining systems Includes the GAMS and MATLAB codes for solving various problems Considers sustainability criteria in the presented models Presents different approaches for obtained trade-off solutions Provides general software that can be used for solving different problems
Download or read book Biomass Supply Chains for Bioenergy and Biorefining written by Jens Bo Holm-Nielsen and published by Woodhead Publishing. This book was released on 2016-02-23 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biomass Supply Chains for Bioenergy and Biorefining highlights the emergence of energy generation through the use of biomass and the ways it is becoming more widely used. The supply chains that produce the feedstocks, harvest, transport, store, and prepare them for combustion or refinement into other forms of fuel are long and complex, often differing from feedstock to feedstock. Biomass Supply Chains for Bioenergy and Biorefining considers every aspect of these supply chains, including their design, management, socioeconomic, and environmental impacts. The first part of the book introduces supply chains, biomass feedstocks, and their analysis, while the second part looks at the harvesting, handling, storage, and transportation of biomass. The third part studies the modeling of supply chains and their management, with the final section discussing, in minute detail, the supply chains involved in the production and usage of individual feedstocks, such as wood and sugar starches, oil crops, industrial biomass wastes, and municipal sewage stocks. Focuses on the complex supply chains of the various potential feedstocks for biomass energy generation Studies a wide range of biomass feedstocks, including woody energy crops, sugar and starch crops, lignocellulosic crops, oil crops, grass crops, algae, and biomass waste Reviews the modeling and optimization, standards, quality control and traceability, socioeconomic, and environmental impacts of supply chains
Download or read book Modeling and Optimization of Biomass Supply Chains written by Calliope Panoutsou and published by Academic Press. This book was released on 2017-08-11 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modeling and Optimization of Biomass Supply Chains: Top Down and Bottom Up Assessment for Agricultural, Forest and Waste Feedstock provides scientific evidence for assessing biomass supply and logistics, placing emphasis on methods, modeling capacities, large data collection, processing and storage. The information presented builds on recent relevant research work from the Biomass Futures, Biomass Policies and S2Biom projects. In addition to technical issues, the book covers the economic, social and environmental aspects with direct implications on biomass availability. Its chapters offer an overview of methodologies for assessing and modeling supply, biomass quality and requirements for different conversion processes, logistics and demand for biobased sectors. Case studies from the projects that inspire the book present practical examples of the implementation of these methodologies. The authors also compare methodologies for different regions, including Europe and the U.S. Biomass feedstock-specific chapters address the relevant elements for forest, agriculture, biowastes, post-consumer wood and non-food crops. Engineers in the bioenergy sector, as well as researchers and graduate students will find this book to be a very useful resource when working on optimization and modeling of biomass supply chains. For energy policymakers, analysts and consultants, the book provides consistent and technically sound projections for policy and market development decisions. Provides consistent ratios and indicators for assessing biomass supply and its logistical component Explores assumptions behind the assessment of different types of biomass, including key technical and non-technical factors Presents the existing modeling platforms, their input requirements and possible output projections
Download or read book Handbook of Bioenergy written by Sandra D. Eksioglu and published by Springer. This book was released on 2015-08-11 with total page 346 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook brings together recent advances in the areas of supply chain optimization, supply chain management, and life-cycle cost analysis of bioenergy. These topics are important for the development and long-term sustainability of the bioenergy industry. The increasing interest in bioenergy has been motivated by its potential to become a key future energy source. The opportunities and challenges that this industry has been facing have been the motivation for a number of optimization-related works on bioenergy. Practitioners and academicians agree that the two major barriers of further investments in this industry are biomass supply uncertainty and costs. The goal of this handbook is to present several cutting-edge developments and tools to help the industry overcome these supply chain and economic challenges. Case studies highlighting the problems faced by investors in the US and Europe illustrate the impact of certain tools in making bioenergy an economically viable energy option.
Download or read book Proceedings of the First International Conference on Recent Advances in Bioenergy Research written by Sachin Kumar and published by Springer. This book was released on 2016-04-25 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: This contributed volume aims to provide latest updates in the area of bioenergy including biodiesel, bioethanol, biomethanation, biomass gasification, and biomass cook-stove. The proceedings of ICRABR 2015 include cutting edge research vital to R&D organizations, academics, and the industry to promote and document the recent developments in the area of bioenergy for all types of stakeholders. The volume highlights the needs of biofuels and their market, the barriers and challenges faced by biofuels and bioenergy and future strategies required to foster new ideas for research, collaboration and commercialization of bioenergy. The major themes of this contributed volume are: Biomass and Energy Management ;Thermochemical Conversion Processes; Biochemical Conversion Processes; Catalytic Conversion Processes; Electrochemical Processes; Waste Treatment to Harvest Energy; and Integrated Processes. The contents of the volume will appeal to students, researchers, professionals, and policymakers in the field of bifuels and bioenergy.
Download or read book 23rd European Symposium on Computer Aided Process Engineering written by and published by Elsevier. This book was released on 2013-06-10 with total page 1085 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computer-aided process engineering (CAPE) plays a key design and operations role in the process industries, from the molecular scale through managing complex manufacturing sites. The research interests cover a wide range of interdisciplinary problems related to the current needs of society and industry. ESCAPE 23 brings together researchers and practitioners of computer-aided process engineering interested in modeling, simulation and optimization, synthesis and design, automation and control, and education. The proceedings present and evaluate emerging as well as established research methods and concepts, as well as industrial case studies. Contributions from the international community using computer-based methods in process engineering Reviews the latest developments in process systems engineering Emphasis on industrial and societal challenges
Download or read book Process Systems Engineering for Biofuels Development written by Adrian Bonilla-Petriciolet and published by John Wiley & Sons. This book was released on 2020-07-23 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of current developments and applications in biofuels production Process Systems Engineering for Biofuels Development brings together the latest and most cutting-edge research on the production of biofuels. As the first book specifically devoted to process systems engineering for the production of biofuels, Process Systems Engineering for Biofuels Development covers theoretical, computational and experimental issues in biofuels process engineering. Written for researchers and postgraduate students working on biomass conversion and sustainable process design, as well as industrial practitioners and engineers involved in process design, modeling and optimization, this book is an indispensable guide to the newest developments in areas including: Enzyme-catalyzed biodiesel production Process analysis of biodiesel production (including kinetic modeling, simulation and optimization) The use of ultrasonification in biodiesel production Thermochemical processes for biomass transformation to biofuels Production of alternative biofuels In addition to the comprehensive overview of the subject of biofuels found in the Introduction of the book, the authors of various chapters have provided extensive discussions of the production and separation of biofuels via novel applications and techniques.
Download or read book Supply Chain Configuration written by Charu Chandra and published by Springer. This book was released on 2016-03-18 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the models and tools available for solving configuration problems, emphasizes the value of model integration to obtain comprehensive and robust configuration decisions, proposes solutions for supply chain configuration in the presence of stochastic and dynamic factors, and illustrates application of the techniques discussed in applied studies. It is divided into four parts, which are devoted to defining the supply chain configuration problem and identifying key issues, describing solutions to various problems identified, proposing technologies for enabling supply chain confirmations, and discussing applied supply chain configuration problems.Its distinguishing features are: an explicit focus on the configuration problem an in-depth coverage of configuration models an emphasis on model integration and application of information modeling techniques in decision-making New to this edition is Part II: Technologies, which introduces readers to various technologies being utilized for supply chain configuration and contains two new chapters. The volume also has an added emphasis on the most recent theoretical developments and empirical findings in the area of supply chain management and related topics. This book is appropriate for professional and technical readers, including research directors, research associates, and institutions involved in both the design and implementation of logistics systems in manufacturing and service-related products. An equally appropriate audience is the academic reader, including professors, research associates, and students in industrial, manufacturing, mechanical, and automotive engineering departments, as well as engineering management, management sciences, and production and operations management.
Download or read book Biofuels Bioenergy and Food Security written by Deepayan Debnath and published by Academic Press. This book was released on 2019-06-15 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biofuels, Bioenergy and Food Security: Technology, Institutions and Policies explores the popular ‘Food versus Fuel’ debates, discussing the complex relationship between the biofuel and agricultural markets. From the importance of bioenergy in the context of climate change, to the potentially positive environmental consequences of growing second generation biofuels crops, this book provides important insights into the impact of policy, the technical implementation and the resulting impact of biofuels. The discussion of existing issues hindering the growth of the cellulosic biofuel industry and their remedies are particularly relevant for policy makers and others associated with the biofuel industry. Transferring information on bioenergy economy through the discussion of the current and emerging biofuel market, country specific case studies explain the existing biofuel policy and its consequences to both the energy and agricultural markets. Economic simulation models explain the future of the bioenergy markets. Biofuels, Bioenergy and Food Security: Technology, Institutions and Policies is an invaluable resource to the students, scientific community, policy makers, and investors in the bioenergy industry. Students will benefit from a variety of perspectives on major societal questions in context of the interaction between food security and bioenergy. Its review of existing literature on the biofuel marker, investment opportunities, and energy independence provides a broad overview to allow informed decision making regarding the industry. Provides an integrated overview of the world biofuel market by country, including a summary of the existing biofuel policies, role of investment opportunities, and rural development potential Discusses the impact of biofuels on efforts by developing countries to become more energy self-sufficient Examines the environmental consequences of biomass-based biofuel use.
Download or read book Soft Computing Applications for Renewable Energy and Energy Efficiency written by Cascales, Maria del Socorro García and published by IGI Global. This book was released on 2014-10-31 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the climate and environment continue to fluctuate, researchers are urgently looking for new ways to preserve our limited resources and prevent further environmental degradation. The answer can be found through computer science, a field that is evolving at precisely the time it is needed most. Soft Computing Applications for Renewable Energy and Energy Efficiency brings together the latest technological research in computational intelligence and fuzzy logic as a way to care for our environment. This reference work highlights current advances and future trends in environmental sustainability using the principles of soft computing, making it an essential resource for students, researchers, engineers, and practitioners in the fields of project engineering and energy science.
Download or read book Economic Modeling Optimization of a Region Specific Multi feedstock Biorefinery Supply Chain written by William Harrison Faulkner and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
