Download or read book Optimization of Manufacturing Systems Using the Internet of Things written by Yingfeng Zhang and published by Academic Press. This book was released on 2016-10-21 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization of Manufacturing Systems Using the Internet of Things extends the IoT (Internet of Things) into the manufacturing field to develop an IoMT (Internet of Manufacturing Things) architecture with real-time traceability, visibility, and interoperability in production planning, execution, and control. This book is essential reading for anyone interested in the optimization and control of an intelligent manufacturing system. As modern manufacturing shop-floors can create bottlenecks in the capturing and collection of real-time field information, and because paper-based manual systems are time-consuming and prone to errors, this book helps readers understand how to alleviate these issues, assisting them in their decision-making on shop-floors. Includes case studies in implementing IoTs for data acquisition, monitoring, and assembly in manufacturing. Helps manufacturers to tackle the growing complexities and uncertainties of manufacturing systems in globalized business environments Acts as an introduction to using IoT for readers across industrial and manufacturing engineering
Download or read book Industrial Internet of Things written by Sabina Jeschke and published by Springer. This book was released on 2016-10-12 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book develops the core system science needed to enable the development of a complex industrial internet of things/manufacturing cyber-physical systems (IIoT/M-CPS). Gathering contributions from leading experts in the field with years of experience in advancing manufacturing, it fosters a research community committed to advancing research and education in IIoT/M-CPS and to translating applicable science and technology into engineering practice. Presenting the current state of IIoT and the concept of cybermanufacturing, this book is at the nexus of research advances from the engineering and computer and information science domains. Readers will acquire the core system science needed to transform to cybermanufacturing that spans the full spectrum from ideation to physical realization.
Download or read book SPS2020 written by K. Säfsten and published by IOS Press. This book was released on 2020-12-24 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Knowledge-intensive product realization implies embedded intelligence; meaning that if both theoretical and practical knowledge and understanding of a subject is integrated into the design and production processes of products, this will significantly increase added value. This book presents papers accepted for the 9th Swedish Production Symposium (SPS2020), hosted by the School of Engineering, Jönköping University, Sweden, and held online on 7 & 8 October 2020 because of restrictions due to the Corona virus pandemic. The subtitle of the conference was Knowledge Intensive Product Realization in Co-Operation for Future Sustainable Competitiveness. The book contains the 57 papers accepted for presentation at the conference, and these are divided into nine sections which reflect the topics covered: resource efficient production; flexible production; virtual production development; humans in production systems; circular production systems and maintenance; integrated product and production development; advanced and optimized components, materials and manufacturing; digitalization for smart products and services; and responsive and efficient operations and supply chains. In addition, the book presents five special sessions from the symposium: development of changeable and reconfigurable production systems; smart production system design and development; supply chain relocation; management of manufacturing digitalization; and additive manufacturing in the production system. The book will be of interest to all those working in the field of knowledge-intensive product realization.
Download or read book Intelligent Manufacturing Mechatronics written by Mohd Hasnun Arif Hassan and published by Springer. This book was released on 2018-04-27 with total page 705 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of SympoSIMM 2018, the 1st edition of the Symposium on Intelligent Manufacturing and Mechatronics. With the theme of “Strengthening Innovations Towards Industry 4.0”, the book comprises the studies towards the particularity of Industry 4.0’s current trends. It is divided into five parts covering various scopes of manufacturing engineering and mechatronics stream, namely Intelligent Manufacturing, Robotics, Artificial Intelligence, Instrumentation, and Modelling and Simulation. It is hoped that this book will benefit the readers in embracing the new era of Industrial Revolution 4.0.
Download or read book Cloud Based Cyber Physical Systems in Manufacturing written by Lihui Wang and published by Springer. This book was released on 2017-11-16 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents state-of-the-art research, challenges and solutions in the area of cloud-based cyber-physical systems (CPS) used in manufacturing. It provides a comprehensive review of the literature and an in-depth treatment of novel methodologies, algorithms and systems in the area of architecture design, cyber security, process planning, monitoring and control. The book features detailed descriptions of how to derive solutions in a cloud environment where physical machines can be supported by cyber decision systems when engaged in real operations. It presents a range of novel ideas and is characterized by a balanced approach in terms of scope vs. depth and theory vs. applications. It also takes into account the need to present intellectual challenges while appealing to a broad readership, including academic researchers, practicing engineers and managers, and graduate students. Dedicated to the topic of cloud-based CPS and its practical applications in manufacturing, this book benefits readers from all manufacturing sectors, from system design to lifecycle engineering and from process planning to machine control. It also helps readers to understand the present challenges and future research directions towards factories of the future, helping them to position themselves strategically for career development.
Download or read book Integration and Implementation of the Internet of Things Through Cloud Computing written by Tomar, Pradeep and published by IGI Global. This book was released on 2021-06-18 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: The internet of things (IoT) has drawn great attention from both academia and industry, since it offers a challenging notion of creating a world where all things around us are connected to the internet and communicate with each other with minimal human intervention. Another component for helping IoT to succeed is cloud computing. The combination of cloud computing and IoT will enable new monitoring services and powerful processing of sensory data streams. These applications, alongside implementation details and challenges, should also be explored for successful mainstream adoption. IoT is also fueled by the advancement of digital technologies, and the next generation era will be cloud-based IoT systems. Integration and Implementation of the Internet of Things Through Cloud Computing studies, analyzes, and presents cloud-based IoT-related technologies, protocols, and standards along with recent research and development in cloud-based IoT. It also presents recent emerging trends and technological advances of cloud-based IoT, innovative applications, and the challenges and implications for society. The chapters included take a strong look at the societal and social aspects of this technology along with its implementations and technological analyses. This book is intended for IT specialists, technologists, practitioners, researchers, academicians, and students who are interested in the next era of IoT through cloud computing.
Download or read book Design and Operation of Production Networks for Mass Personalization in the Era of Cloud Technology written by Dimitris Mourtzis and published by Elsevier. This book was released on 2021-11-10 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Operation of Production Networks for Mass Personalization in the Era of Cloud Technology draws on the latest industry advances to provide everything needed for the effective implementation of this powerful tool. Shorter product lifecycles have increased pressure on manufacturers through the increasing variety and complexity of production, challenging their workforce to remain competitive and profitable. This has led to innovation in production network methodologies, which together with opportunities provided by new digital technologies has fed a rapid evolution of production engineering that has opened new solutions to the challenges of mass personalization and market uncertainty. In addition to the latest developments in cloud technology, reference is made to key enabling technologies, including artificial intelligence, the digital twin, big data analytics, and the internet of things (IoT) to help users integrate the cloud approach with a fully digitalized production system. - Presents diverse cases that show how cloud-based technologies can be used in different ways as part of the standard operation of global production networks - Provides detailed reviews of new technologies like the digital twin, big data analytics, and blockchain to provide context on the role of cloud technologies in a fully digitalized system - Explores future trends for cloud technology and production engineering
Download or read book Scheduling in Industry 4 0 and Cloud Manufacturing written by Boris Sokolov and published by Springer Nature. This book was released on 2020-06-08 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book has resulted from the activities of IFAC TC 5.2 “Manufacturing Modelling for Management and Control”. The book offers an introduction and advanced techniques of scheduling applications to cloud manufacturing and Industry 4.0 systems for larger audience. This book uncovers fundamental principles and recent developments in the theory and application of scheduling methodology to cloud manufacturing and Industry 4.0. The purpose of this book is to present recent developments in scheduling in cloud manufacturing and Industry 4.0 and to systemize these developments in new taxonomies and methodological principles to shape this new research domain. This book addresses the needs of both researchers and practitioners to uncover the challenges and opportunities of scheduling techniques’ applications to cloud manufacturing and Industry 4.0. For the first time, it comprehensively conceptualizes scheduling in cloud manufacturing and Industry 4.0 systems as a new research domain. The chapters of the book are written by the leading international experts and utilize methods of operations research, industrial engineering and computer science. Such a multi-disciplinary combination is unique and comprehensively deciphers major problem taxonomies, methodologies, and applications to scheduling in cloud manufacturing and Industry 4.0.
Download or read book Sustainable Automated Production Systems written by Hamed Fazlollahtabar and published by CRC Press. This book was released on 2024-06-26 with total page 219 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to disruptions occurring within production processes as a result of different circumstances, it is necessary to provide a new and safe production system that can be resilient to cope with any crisis, such as a pandemic. New sustainable automated production systems need to be proposed and adopted by industrial managers and this book fulfills that need. Sustainable Automated Production Systems: Industry 4.0 Models and Techniques includes the modern technologies of Industry 4.0 and discusses automated systems, robotic production, sustainable automation, production process automation, and the use of IoT in production. It goes over the circular economy and automated production processes and presents theories and practices associated with mathematical models of process automation in sustainable production. The book also investigates how sustainability in automated production systems using the IoT can present unique circumstances when pandemics or other disruptions are involved. The book includes chapters presenting sustainable production models and automated production using Industry 4.0 technologies and is targeted to help both practitioners and academics.
Download or read book Internet of Things written by Ravi Ramakrishnan and published by CRC Press. This book was released on 2019-06-04 with total page 277 pages. Available in PDF, EPUB and Kindle. Book excerpt: The concept of Internet of Things has silently existed since the late nineteenth century but in the current decade expectations and excitement has peaked. However not many have understood the profound change that it can usher in. How big this change can be and how it can transform our working!! This book aims to bring in this realization with illustrative and practical case studies with comprehensive concepts. From beginners to practitioners in the field of academics or industry, it serves as a comprehensive yet easy to comprehend source of information on the multiple facets of IoT. Simplistic but comprehensive introduction of the facets of primarily the industrial IoT Practical adoption cases explaining the Core technology stack and business applications Comprehensive view of current technologies which complete the IoT delivery ecosystem, followed by overview of IoT enabled new business models. Realistic view of how industrial firms can evolve into the next stage of maturity along with determinants influencing this transformation since manufacturing is envisioned to be a key segment to adopt and benefit from IoT. Detailed analysis of IoT benefits for the universal triad- energy management, logistics optimization and distribution channel management. A full-fledged case study on Adoption of Green manufacturing using IoT. Real world example of gauging End User perception using different models which is important for a successful adoption of IoT. A futuristic visionary view of IoT as comprehended based on evolution of technology and platforms, and finally analysis of the extremely crucial concepts of security, privacy and governance.
Download or read book Enterprise IoT written by Dirk Slama and published by "O'Reilly Media, Inc.". This book was released on 2015-10-29 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: Current hype aside, the Internet of Things will ultimately become as fundamental as the Internet itself, with lots of opportunities and trials along the way. To help you navigate these choppy waters, this practical guide introduces a dedicated methodology for businesses preparing to transition towards IoT-based business models. With a set of best practices based on case study analysis, expert interviews, and the authors’ own experience, the Ignite | IoT Methodology outlined in this book delivers actionable guidelines to assist you with IoT strategy management and project execution. You’ll also find a detailed case study of a project fully developed with this methodology. This book consists of three parts: Illustrative case studies of selected IoT domains, including smart energy, connected vehicles, manufacturing and supply chain management, and smart cities The Ignite | IoT Methodology for defining IoT strategy, preparing your organization for IoT adoption, and planning and executing IoT projects A detailed case study of the IIC Track & Trace testbed, one of the first projects to be fully developed according to the Ignite | IoT Methodology
Download or read book Handbook of Smart Manufacturing written by Ajay and published by CRC Press. This book was released on 2023-07-17 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook covers smart manufacturing development, processing, modifications, and applications. It provides a complete understanding of the recent advancements in smart manufacturing through its various enabling manufacturing technologies, and how industries and organizations can find the needed information on how to implement smart manufacturing towards sustainability of manufacturing practices. Handbook of Smart Manufacturing: Forecasting the Future of Industry 4.0 covers all related advances in manufacturing such as the integration of reverse engineering with smart manufacturing, industrial internet of things (IIoT), and artificial intelligence approaches, including Artificial Neural Network, Markov Decision Process, and Heuristics Methodology. It offers smart manufacturing methods like 4D printing, micro-manufacturing, and processing of smart materials to assist the biomedical industries in the fabrication of human prostheses and implants. The handbook goes on to discuss how to accurately predict the requirements, identify errors, and make innovation for the manufacturing process more manageable by implementing various advanced technologies and solutions into the traditional manufacturing process. Strategies and algorithms used to incorporate smart manufacturing into different sectors are also highlighted within the handbook. This handbook is an invaluable resource for stakeholders, industries, professionals, technocrats, academics, research scholars, senior graduate students, and human healthcare professionals.
Download or read book Application of Optimization in Production Logistics Inventory Supply Chain Management and Block Chain written by Biswajit Sarkar and published by MDPI. This book was released on 2020-04-23 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of industrial development since the 18th century is now experiencing the fourth industrial revolution. The effect of the development has propagated into almost every sector of the industry. From inventory to the circular economy, the effectiveness of technology has been fruitful for industry. The recent trends in research, with new ideas and methodologies, are included in this book. Several new ideas and business strategies are developed in the area of the supply chain management, logistics, optimization, and forecasting for the improvement of the economy of the society and the environment. The proposed technologies and ideas are either novel or help modify several other new ideas. Different real life problems with different dimensions are discussed in the book so that readers may connect with the recent issues in society and industry. The collection of the articles provides a glimpse into the new research trends in technology, business, and the environment.
Download or read book ICT and Data Sciences written by Archana Singh and published by CRC Press. This book was released on 2022-05-15 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights the state-of-the-art research on data usage, security, and privacy in the scenarios of the Internet of Things (IoT), along with related applications using Machine Learning and Big Data technologies to design and make efficient Internet-compatible IoT systems. ICT and Data Sciences brings together IoT and Machine Learning and provides the careful integration of both, along with many examples and case studies. It illustrates the merging of two technologies while presenting basic to high-level concepts covering different fields and domains such as the Hospitality and Tourism industry, Smart Clothing, Cyber Crime, Programming, Communications, Business Intelligence, all in the context of the Internet of Things. The book is written for researchers and practitioners, working in Information Communication Technology and Computer Science.
Download or read book Nuclear Energy and the Evolution of Fission to Fusion Power written by Ronald Legarski and published by SolveForce. This book was released on 2024-09-18 with total page 874 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Energy and the Evolution of Fission to Fusion Power: The Role of Plasma and Small Modular Reactors (SMRs) in Bridging Technologies by Ronald Legarski, Yash Patel, and Zoltan Csernus offers an authoritative exploration of the development and future of nuclear energy. The book traces the journey from the discovery of nuclear fission to the emerging promise of fusion power, highlighting the role of Small Modular Reactors (SMRs) and plasma technologies in advancing clean energy. Ronald Legarski, an expert in simplifying complex technical ideas, delves into how nuclear advancements, including SMRs and grid technologies, can revolutionize energy production. Yash Patel, an accomplished entrepreneur and trained Nuclear Engineer, contributes his extensive experience in project management and high-energy physics, providing insights into innovation and regulatory compliance in nuclear technology. Zoltan Csernus, with over 40 years of experience as a master electrician, specializes in power quality improvements and groundbreaking harmonics reduction technology, playing a key role in SMR and energy storage developments. This comprehensive guide is indispensable for energy professionals, engineers, and those looking to understand the future of nuclear power. It covers the scientific breakthroughs, reactor technologies, environmental considerations, and future prospects of nuclear energy, offering a thorough look at how fission and fusion technologies will help shape a sustainable energy future.
Download or read book Industry 4 0 written by Tamás Bányai and published by . This book was released on 2020 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Optimization and Management in Manufacturing Engineering written by Xinbao Liu and published by Springer. This book was released on 2017-10-13 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Problems facing manufacturing clusters that intersect information technology, process management, and optimization within the Internet of Things (IoT) are examined in this book. Recent advances in information technology have transformed the use of resources and data exchange, often leading to management and optimization problems attributatble to technology limitations and strong market competition. This book discusses several problems and concepts which makes significant connections in the areas of information sharing, organization management, resource operations, and performance assessment. Geared toward practitioners and researchers, this treatment deepens the understanding between resource collaborative management and advanced information technology. Those in manufacturing will utilize the numerous mathematical models and methods offered to solve practical problems related to cutting stock, supply chain scheduling, and inventory management. Academics and students with a basic knowledge of manufacturing, combinatorics, and linear programming will find that this discussion widens the research area of resource collaborative management and unites the fields of information technology, manufacturing management, and optimization.