Download or read book Optimization of Distributed Parameter Structures Under Dynamic Loads written by T. T. Feng and published by . This book was released on 1976 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this report, optimal design of continuous structural systems under dynamic loads is considered. An optimization technique is developed based on the generalized steepest descent method and optimal control techniques Bryson and Ho. The method is then applied to some beam and plate problems. (Author).
Download or read book Optimization of Distributed Parameter Structures Volume I written by E.J. Haug and published by Springer. This book was released on 1981-10-31 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: These proceedings contain lectures and contributed papers presented at the NATO-NSF Advanced Stucy Institute on Optimization of Distributed Parameter Structures (Iowa City, Iowa 21 May - 4 June, 1980). The institute was organized by E. Haug and J. Cea, with the enthusiastic help of leading contributors to the field of distributed parameter structural optimization. The principle con tributor to this field during the past two decades, Professor William Prager, participated in planning for the Institute and helped to establish its technical direction. His death just prior to the Institute is a deep loss to the community of engineers and mathematicians in the field, to which he made pioneering contri butions. The proceedings are organized into seven parts, each address ing important problems and special considerations involving classes of structural optimization problems. The review paper presented first in the proceedings surveys contributions to the field, primarily during the decade 1970-1980. Part I of the pro ceedings addresses optimality criteria methods for analyzing and solving problems of distributed parameter structural optimization. Optimality criteria obtained using variational methods of mech anics, calculus of variation, optimal control theory, and abstract optimization theory are presented for numerous classes of struct ures; including beams, columns, plates, grids, shells, and arches.
Download or read book Optimization of Distributed Parameter Structures written by Edward J. Haug and published by Kluwer Academic Publishers. This book was released on 1981 with total page 796 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control and Dynamic Systems V13 written by C.T. Leonides and published by Elsevier. This book was released on 2012-12-02 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Applications, Volume 13 discusses the techniques of control and dynamic systems and their applications to modern complex systems. This book begins by discussing the application of modern optimal theory in the operation of large scale power systems. It then describes how to synthesize suspension forces for high-speed tracked vehicles. The succeeding chapters present examples of economizing problems; application of optimization techniques to aerospace vehicle problems; distributed parameter optimal design problem under dynamic loads; optimization of spacecraft; and stability problems in interconnected systems. Engineering students studying the application of control and dynamics to modern complex systems will find this book very useful.
Download or read book Introduction to Optimization of Structures written by N.V. Banichuk and published by Springer Science & Business Media. This book was released on 2013-04-17 with total page 308 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an exposition of the theory, techniques, and the basic formulation of structural optimization problems. The author considers applications of design optimization criteria involving strength, rigidity, stability and weight. Analytic and numerical techniques are introduced for research in optimal shapes and internal configurations of deformable bodies and structures. Problems of the optimal design of beams, systems of rods, plates and shells, are studied in detail. With regard to applications, this work is oriented towards solutions of real problems, such as reduction of the volume or weight of the material, and improvement of mechanical properties of structures. This book is written for readers specializing in applied mechanics, applied mathematics, and numerical analysis."
Download or read book Distributed Parameter Control Systems written by Spyros G. Tzafestas and published by Elsevier. This book was released on 2013-10-22 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: Distributed Parameter Control Systems: Theory and Application is a two-part book consisting of 10 theoretical and five application-oriented chapters contributed by well-known workers in the distributed-parameter systems. The book covers topics of distributed parameter control systems in the areas of simulation, identification, state estimation, stability, control (optimal, stochastic, and coordinated), numerical approximation methods, optimal sensor, and actuator positioning. Five applications works include chemical reactors, heat exchangers, petroleum reservoirs/aquifers, and nuclear reactors. The text will be a useful reference for both graduate students and professional researchers working in the field.
Download or read book Topology Optimization in Structural and Continuum Mechanics written by George I. N. Rozvany and published by Springer Science & Business Media. This book was released on 2013-09-20 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book covers new developments in structural topology optimization. Basic features and limitations of Michell’s truss theory, its extension to a broader class of support conditions, generalizations of truss topology optimization, and Michell continua are reviewed. For elastic bodies, the layout problems in linear elasticity are discussed and the method of relaxation by homogenization is outlined. The classical problem of free material design is shown to be reducible to a locking material problem, even in the multiload case. For structures subjected to dynamic loads, it is explained how they can be designed so that the structural eigenfrequencies of vibration are as far away as possible from a prescribed external excitation frequency (or a band of excitation frequencies) in order to avoid resonance phenomena with high vibration and noise levels. For diffusive and convective transport processes and multiphysics problems, applications of the density method are discussed. In order to take uncertainty in material parameters, geometry, and operating conditions into account, techniques of reliability-based design optimization are introduced and reviewed for their applicability to topology optimization.
Download or read book Optimization of Distributed Parameter Structures written by Edward J. Haug and published by . This book was released on 1981 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control and Dynamic Systems V21 written by C.T. Leonides and published by Elsevier. This book was released on 2012-12-02 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Applications, Volume 21: Nonlinear and Kalman Filtering Techniques, Part 3 of 3 presents the developments in the techniques and technology of the application of nonlinear and Kalman filters. This book provides substantive examples of the methods and technology of the application of Kalman and nonlinear filters. Organized into six chapters, this volume begins with an overview of the unique and relevant treatment of postflight data analysis. This text then examines the control and filter problems for the interception of torpedo-ship situations. Other chapters consider the MLS algorithm, which has been shown to be a superior algorithm in terms of stability and tracking performance when compared to existing least squares batch algorithm that use both a transition matrix and a measurement. The final chapter deals with the significant trends in integrated communication and navigation systems. This book is a valuable resource for mechanical and aerospace engineers.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1972 with total page 1056 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Control and Dynamic Systems V16 written by C.T. Leonides and published by Elsevier. This book was released on 2012-12-02 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Application, Volume 16 is concerned with applied dynamic systems control techniques. It describes various techniques for system modeling, which apply to several systems issues. This book presents a comprehensive treatment of powerful algorithmic techniques for solving dynamic-system optimization problems. It also describes approaches for systems model that apply to system issues such as time delays. The remaining chapters of this book explore the simulation of large closed-loop systems and optimization of low-order feedback controllers for discrete-time systems. Researchers who wish to broaden their understanding of dynamic systems control techniques will find this book invaluable.
Download or read book Problems and Methods of Optimal Structural Design written by Nikolai Vladimirovich Banichuk and published by Springer Science & Business Media. This book was released on 2013-03-13 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The author offers a systematic and careful development of many aspects of structural optimization, particularly for beams and plates. Some of the results are new and some have appeared only in specialized Soviet journals, or as pro ceedings of conferences, and are not easily accessible to Western engineers and mathematicians. Some aspects of the theory presented here, such as optimiza tion of anisotropic properties of elastic structural elements, have not been con sidered to any extent by Western research engineers. The author's treatment is "classical", i.e., employing classical analysis. Classical calculus of variations, the complex variables approach, and the Kolosov Muskhelishvili theory are the basic techniques used. He derives many results that are of interest to practical structural engineers, such as optimum designs of structural elements submerged in a flowing fluid (which is of obvious interest in aircraft design, in ship building, in designing turbines, etc.). Optimization with incomplete information concerning the loads (which is the case in a great majority of practical design considerations) is treated thoroughly. For example, one can only estimate the weight of the traffic on a bridge, the wind load, the additional loads if a river floods, or possible earthquake loads.
Download or read book Sensitivity of Functionals with Applications to Engineering Sciences written by V. Komkov and published by Springer. This book was released on 2006-11-14 with total page 136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Applied Optimal Control Theory of Distributed Systems written by K.A. Lurie and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book represents an extended and substantially revised version of my earlierbook, Optimal Control in Problems ofMathematical Physics,originally published in Russian in 1975. About 60% of the text has been completely revised and major additions have been included which have produced a practically new text. My aim was to modernize the presentation but also to preserve the original results, some of which are little known to a Western reader. The idea of composites, which is the core of the modern theory of optimization, was initiated in the early seventies. The reader will find here its implementation in the problem of optimal conductivity distribution in an MHD-generatorchannel flow.Sincethen it has emergedinto an extensive theory which is undergoing a continuous development. The book does not pretend to be a textbook, neither does it offer a systematic presentation of the theory. Rather, it reflects a concept which I consider as fundamental in the modern approach to optimization of dis tributed systems. Bibliographical notes,though extensive, do not pretend to be exhaustive as well. My thanks are due to ProfessorJean-Louis Armand and ProfessorWolf Stadler whose friendly assistance in translating and polishing the text was so valuable. I am indebted to Mrs. Kathleen Durand and Mrs. Colleen Lewis for the hard job of typing large portions of the manuscript.
Download or read book Structural Optimization written by Franklin Y. Cheng and published by CRC Press. This book was released on 2017-12-21 with total page 708 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s biggest structural engineering challenge is to design better structures, and a key issue is the need to take an integrated approach which balances control of costs with the requirement for handling earthquakes and other dynamic forces. Structural optimization is based on rigorous mathematical formulation and requires computation algorithms for sizing structural elements and synthesizing systems. Now that the right software and enough computing power are readily available, professionals can now develop a suite of alternative designs and a select suitable one. A thoroughly-written and practical book on structural optimization is long overdue. This solid book comprehensively presents current optimization strategies, illustrated with sufficient examples of the design of elements and systems and presenting descriptions of the process and results. Emphasis is given to dynamic loading, in particular to seismic forces. Researchers and practising engineers will find this book an excellent reference, and advanced undergraduates or graduate students can use it as a resource for structural optimization design.
Download or read book Control and Dynamic Systems V15 written by C.T. Leonides and published by Elsevier. This book was released on 2012-12-02 with total page 379 pages. Available in PDF, EPUB and Kindle. Book excerpt: Control and Dynamic Systems: Advances in Theory and Application, Volume 15 deals with the application of control and dynamic systems to complex and/or large-scale engineering systems. It presents various techniques for approaching applied systems problems. This book first discusses optimization policies for clinical drug prescription. It then turns to the methods of modeling chemical engineering systems and water resource systems. This book also examines the optimization of large scale structures and advances in linear adaptive filtering theory. This book is a useful reference for those seeking a comprehensive text about optimization techniques for chemical engineering systems and large-scale systems.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1988 with total page 1142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
