Download or read book Maintenance Modeling and Optimization written by Mohamed Ben-Daya and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 481 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production costs are being reduced by automation, robotics, computer-integrated manufacturing, cost reduction studies and more. These new technologies are expensive to buy, repair, and maintain. Hence, the demand on maintenance is growing and its costs are escalating. This new environment is compelling industrial maintenance organizations to make the transition from fixing broken machines to higher-level business units for securing production capacity. On the academic front, research in the area of maintenance management and engineering is receiving tremendous interest from researchers. Many papers have appeared in the literature dealing with the modeling and solution of maintenance problems using operations research (OR) and management science (MS) techniques. This area represents an opportunity for making significant contributions by the OR and MS communities. Maintenance, Modeling, and Optimization provides in one volume the latest developments in the area of maintenance modeling. Prominent scholars have contributed chapters covering a wide range of topics. We hope that this initial contribution will serve as a useful informative introduction to this field that may permit additional developments and useful directions for more research in this fast-growing area. The book is divided into six parts and contains seventeen chapters. Each chapter has been subject to review by at least two experts in the area of maintenance modeling and optimization. The first chapter provides an introduction to major maintenance modeling areas illustrated with some basic models. Part II contains five chapters dealing with maintenance planning and scheduling. Part III deals with preventive maintenance in six chapters. Part IV focuses on condition-based maintenance and contains two chapters. Part V deals with integrated production and maintenance models and contains two chapters. Part VI addresses issues related to maintenance and new technologies, and also deals with Just-in-Time (JIT) and Maintenance.

Download or read book Maintenance Excellence written by John D. Campbell and published by CRC Press. This book was released on 2001-02-13 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: Considering maintenance from a proactive, rather than reactive, perspective, Maintenance Excellence details the strategies, tools, and solutions for maximizing the productivity of physical assets—focusing on profitability potential. The editors address contemporary concerns, key terms, data requirements, critical methodologies, and essential mathematical needs. They present maintenance in a business context, review planning, measurement, feedback, and techniques related to cost, efficiency, and results, and summarize applications of tools and software from statistics and neural networks to cost-optimized models.

Download or read book Reliability Based Aircraft Maintenance Optimization and Applications written by He Ren and published by Academic Press. This book was released on 2017-03-19 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability Based Aircraft Maintenance Optimization and Applications presents flexible and cost-effective maintenance schedules for aircraft structures, particular in composite airframes. By applying an intelligent rating system, and the back-propagation network (BPN) method and FTA technique, a new approach was created to assist users in determining inspection intervals for new aircraft structures, especially in composite structures. This book also discusses the influence of Structure Health Monitoring (SHM) on scheduled maintenance. An integrated logic diagram establishes how to incorporate SHM into the current MSG-3 structural analysis that is based on four maintenance scenarios with gradual increasing maturity levels of SHM. The inspection intervals and the repair thresholds are adjusted according to different combinations of SHM tasks and scheduled maintenance. This book provides a practical means for aircraft manufacturers and operators to consider the feasibility of SHM by examining labor work reduction, structural reliability variation, and maintenance cost savings. - Presents the first resource available on airframe maintenance optimization - Includes the most advanced methods and technologies of maintenance engineering analysis, including first application of composite structure maintenance engineering analysis integrated with SHM - Provides the latest research results of composite structure maintenance and health monitoring systems

Download or read book Cases on Optimizing the Asset Management Process written by González-Prida, Vicente and published by IGI Global. This book was released on 2021-10-15 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is critical to improve the asset management system implementation as well as economics and industrial decision making to ensure that a business may move smoothly internally. Maintenance management should be aligned to the activities of maintenance in accordance with key business strategies, which must be designed under the comprehensive approach of an asset management process. After transforming the priorities of the business into priorities of maintenance, maintenance managers will use their medium-team strategies to tackle potential weaknesses in the maintenance of the equipment in accordance with these objectives. Cases on Optimizing the Asset Management Process explains and summarizes the processes and the reference frame necessary for the implementation of the Maintenance Management Model (MMM). This book acts as an overview of the current state of the art in asset management, providing innovative tools and practices from the fourth industrial revolution. Presenting topics like criticality analysis, physical asset maintenance, and unified modelling language, this text is essential for industrial and manufacturing engineers, plant supervisors, academicians, researchers, advanced-level students, technology developers, and managers who make decisions in this field.

Download or read book Handbook of Research on Applied Optimization Methodologies in Manufacturing Systems written by Faruk Y?lmaz, Ömer and published by IGI Global. This book was released on 2017-11-30 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today’s manufacturing systems are undergoing significant changes in the aspects of planning, production execution, and delivery. It is imperative to stay up-to-date on the latest trends in optimization to efficiently create products for the market. The Handbook of Research on Applied Optimization Methodologies in Manufacturing Systems is a pivotal reference source including the latest scholarly research on heuristic models for solving manufacturing and supply chain related problems. Featuring exhaustive coverage on a broad range of topics such as assembly ratio, car sequencing, and color constraints, this publication is ideally designed for practitioners seeking new comprehensive models for problem solving in manufacturing and supply chain management.

Download or read book Introduction to Maintenance Engineering written by Mohamed Ben-Daya and published by John Wiley & Sons. This book was released on 2016-04-04 with total page 659 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introductory textbook links theory with practice using real illustrative cases involving products, plants and infrastructures and exposes the student to the evolutionary trends in maintenance. Provides an interdisciplinary approach which links, engineering, science, technology, mathematical modelling, data collection and analysis, economics and management Blends theory with practice illustrated through examples relating to products, plants and infrastructures Focuses on concepts, tools and techniques Identifies the special management requirements of various engineered objects (products, plants, and infrastructures)

Download or read book Multi state System Reliability Assessment Optimization And Applications written by Gregory Levitin and published by World Scientific Publishing Company. This book was released on 2003-03-12 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most books on reliability theory are devoted to traditional binary reliability models allowing for only two possible states for a system and its components: perfect functionality and complete failure. However, many real-world systems are composed of multi-state components, which have different performance levels and several failure modes with various effects on the entire system performance (degradation). Such systems are called Multi-State Systems (MSS). The examples of MSS are power systems where the component performance is characterized by the generating capacity, computer systems where the component performance is characterized by the data processing speed, communication systems, etc.This book is the first to be devoted to Multi-State System (MSS) reliability analysis and optimization. It provides a historical overview of the field, presents basic concepts of MSS, defines MSS reliability measures, and systematically describes the tools for MSS reliability assessment and optimization. Basic methods for MSS reliability assessment, such as a Boolean methods extension, basic random process methods (both Markov and semi-Markov) and universal generating function models, are systematically studied. A universal genetic algorithm optimization technique and all details of its application are described. All the methods are illustrated by numerical examples. The book also contains many examples of application of reliability assessment and optimization methods to real engineering problems.The aim of this book is to give a comprehensive, up-to-date presentation of MSS reliability theory based on modern advances in this field and provide a theoretical summary and examples of engineering applications to a variety of technical problems. From this point of view the book bridges the gap between theoretical advances and practical reliability engineering.

Download or read book Reliability Centered Maintenance Reengineered written by Jesus R. Sifonte and published by CRC Press. This book was released on 2017-05-25 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability Centered Maintenance – Reengineered: Practical Optimization of the RCM Process with RCM-R® provides an optimized approach to a well-established and highly successful method used for determining failure management policies for physical assets. It makes the original method that was developed to enhance flight safety far more useful in a broad range of industries where asset criticality ranges from high to low. RCM-R® is focused on the science of failures and what must be done to enable long-term sustainably reliable operations. If used correctly, RCM-R® is the first step in delivering fewer breakdowns, more productive capacity, lower costs, safer operations and improved environmental performance. Maintenance has a huge impact on most businesses whether its presence is felt or not. RCM-R® ensures that the right work is done to guarantee there are as few nasty surprises as possible that can harm the business in any way. RCM-R® was developed to leverage on RCM’s original success at delivering that effectiveness while addressing the concerns of the industrial market. RCM-R® addresses the RCM method and shortfalls in its application -- It modifies the method to consider asset and even failure mode criticality so that rigor is applied only where it is truly needed. It removes (within reason) the sources of concern about RCM being overly rigorous and too labor intensive without compromising on its ability to deliver a tailored failure management program for physical assets sensitive to their operational context and application. RCM-R® also provides its practitioners with standard based guidance for determining meaningful failure modes and causes facilitating their analysis for optimum outcome. Includes extensive review of the well proven RCM method and what is needed to make it successful in the industrial environment Links important elements of the RCM method with relevant International Standards for risk management and failure management Enhances RCM with increased emphasis on statistical analysis, bringing it squarely into the realm of Evidence Based Asset Management Includes extensive, experience based advice on implementing and sustaining RCM based failure management programs

Download or read book Handbook of Performability Engineering written by Krishna B. Misra and published by Springer Science & Business Media. This book was released on 2008-08-24 with total page 1331 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dependability and cost effectiveness are primarily seen as instruments for conducting international trade in the free market environment. These factors cannot be considered in isolation of each other. This handbook considers all aspects of performability engineering. The book provides a holistic view of the entire life cycle of activities of the product, along with the associated cost of environmental preservation at each stage, while maximizing the performance.

Download or read book Reliability Maintenance and Logistic Support written by U Dinesh Kumar and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 500 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reliability, Maintainability, and Supportability play a crucial role in achieving a competitive product. While manufacturing costs are important for the success of a product, they are not the sole domains in realizing its competitive edge. Improved manufacturing and operating quality and performance coupled with reduced acquisition cost and in-service cost of ownership are important in achieving business success. It is the early phase of design which offers the greatest opportunity to address these requirements, and thus create life cycle effectiveness. The main objective of Reliability, Maintenance and Logistic Support - A Life Cycle Approach is to provide an integrated approach to reliability, maintainability, maintenance and logistic support analysis. We not only look at the ways we can improve the design process to ensure the product offers value for money, but we also consider how the owners can get the most from these products once they have entered service. The approach provides a meaningful way of integrating reliability, maintenance and supportability to enhance the product performance and sales opportunities. Hence, the book covers the following objectives: (1) Introduce the concepts of reliability, maintainability and supportability and their role in the system life cycle and effectiveness. (2) Introduce the basic probability and statistical techniques that are essential for modelling reliability, maintainability and supportability problems. (3) Introduce reliability measures: how to predict them; how to determine from in-service real-world data; how to use them. (4) Analysis of advanced models in Reliability. (5) Discuss basic and advanced concepts in both maintainability and maintenance including preventive, corrective and condition based maintenance. (6) Discuss maintenance management and optimization concepts, such as reliability-centered maintenance and age-related maintenance. (7) Provide basic concepts in supportability and Integrated logistic support. (8) Discuss techniques for design for reliability, maintainability and supportability. (9) Analysis of simple and advanced models in spares forecasting and optimization. (10) Discuss data analysis, data management and data mining techniques.

Download or read book Planning and Control of Maintenance Systems written by Salih O. Duffuaa and published by Springer. This book was released on 2015-07-11 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: Analyzing maintenance as an integrated system with objectives, strategies and processes that need to be planned, designed, engineered, and controlled using statistical and optimization techniques, the theme of this book is the strategic holistic system approach for maintenance. This approach enables maintenance decision makers to view maintenance as a provider of a competitive edge not a necessary evil. Encompassing maintenance systems; maintenance strategic and capacity planning, planned and preventive maintenance, work measurements and standards, material (spares) control, maintenance operations and control, planning and scheduling, maintenance quality, training, and others, this book gives readers an understanding of the relevant methodology and how to apply it to real-world problems in industry. Each chapter includes a number exercises and is suitable as a textbook or a reference for a professionals and practitioners whilst being of interest to industrial engineering, mechanical engineering, electrical engineering, and industrial management students. It can also be used as a textbook for short courses on maintenance in industry. This text is the second edition of the book, which has four new chapters added and three chapters are revised substantially to reflect development in maintenance since the publication of the first edition. The new chapters cover reliability centered maintenance, total productive maintenance, e-maintenance and maintenance performance, productivity and continuous improvement.

Download or read book Complex System Maintenance Handbook written by Khairy Ahmed Helmy Kobbacy and published by Springer Science & Business Media. This book was released on 2008-04-18 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: This utterly comprehensive work is thought to be the first to integrate the literature on the physics of the failure of complex systems such as hospitals, banks and transport networks. It has chapters on particular aspects of maintenance written by internationally-renowned researchers and practitioners. This book will interest maintenance engineers and managers in industry as well as researchers and graduate students in maintenance, industrial engineering and applied mathematics.

Download or read book Bridge Maintenance Safety Management and Life Cycle Optimization written by Dan Frangopol and published by CRC Press. This book was released on 2010-07-07 with total page 738 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridge Maintenance, Safety, Management and Life-Cycle Optimization contains the lectures and papers presented at IABMAS 2010, the Fifth International Conference of the International Association for Bridge Maintenance and Safety (IABMAS), held in Philadelphia, Pennsylvania, USA from July 11 through 15, 2010.All major aspects of bridge maintenance, s

Download or read book Variable Neighborhood Search written by Rachid Benmansour and published by Springer Nature. This book was released on 2020-04-07 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume constitutes the post- conference proceedings of the 7th International Conference on Variable Neighborhood Search, ICVNS 2019, held in Rabat, Morocco, in October 2019. The 13 full papers presented in this volume were carefully reviewed and selected from 46 submissions. The papers describe recent advances in methods and applications of variable neighborhood search.

Download or read book An Introduction to Predictive Maintenance written by R. Keith Mobley and published by Elsevier. This book was released on 2002-10-24 with total page 451 pages. Available in PDF, EPUB and Kindle. Book excerpt: This second edition of An Introduction to Predictive Maintenance helps plant, process, maintenance and reliability managers and engineers to develop and implement a comprehensive maintenance management program, providing proven strategies for regularly monitoring critical process equipment and systems, predicting machine failures, and scheduling maintenance accordingly. Since the publication of the first edition in 1990, there have been many changes in both technology and methodology, including financial implications, the role of a maintenance organization, predictive maintenance techniques, various analyses, and maintenance of the program itself. This revision includes a complete update of the applicable chapters from the first edition as well as six additional chapters outlining the most recent information available. Having already been implemented and maintained successfully in hundreds of manufacturing and process plants worldwide, the practices detailed in this second edition of An Introduction to Predictive Maintenance will save plants and corporations, as well as U.S. industry as a whole, billions of dollars by minimizing unexpected equipment failures and its resultant high maintenance cost while increasing productivity. - A comprehensive introduction to a system of monitoring critical industrial equipment - Optimize the availability of process machinery and greatly reduce the cost of maintenance - Provides the means to improve product quality, productivity and profitability of manufacturing and production plants

Download or read book Application of Optimization in Production Logistics Inventory Supply Chain Management and Block Chain written by Biswajit Sarkar and published by MDPI. This book was released on 2020-04-23 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of industrial development since the 18th century is now experiencing the fourth industrial revolution. The effect of the development has propagated into almost every sector of the industry. From inventory to the circular economy, the effectiveness of technology has been fruitful for industry. The recent trends in research, with new ideas and methodologies, are included in this book. Several new ideas and business strategies are developed in the area of the supply chain management, logistics, optimization, and forecasting for the improvement of the economy of the society and the environment. The proposed technologies and ideas are either novel or help modify several other new ideas. Different real life problems with different dimensions are discussed in the book so that readers may connect with the recent issues in society and industry. The collection of the articles provides a glimpse into the new research trends in technology, business, and the environment.

Download or read book Operations Research Proceedings 2019 written by Janis S. Neufeld and published by Springer Nature. This book was released on 2020-09-24 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers a selection of peer-reviewed papers presented at the International Conference on Operations Research (OR 2019), which was held at Technische Universität Dresden, Germany, on September 4-6, 2019, and was jointly organized by the German Operations Research Society (GOR) the Austrian Operations Research Society (ÖGOR), and the Swiss Operational Research Society (SOR/ASRO). More than 600 scientists, practitioners and students from mathematics, computer science, business/economics and related fields attended the conference and presented more than 400 papers in plenary presentations, parallel topic streams, as well as special award sessions. The respective papers discuss classical mathematical optimization, statistics and simulation techniques. These are complemented by computer science methods, and by tools for processing data, designing and implementing information systems. The book also examines recent advances in information technology, which allow big data volumes to be processed and enable real-time predictive and prescriptive business analytics to drive decisions and actions. Lastly, it includes problems modeled and treated while taking into account uncertainty, risk management, behavioral issues, etc.