Download or read book 2G dossier written by and published by . This book was released on 2002 with total page 614 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book 6th International Conference on the Conservation of Earthen Architecture written by The Getty Conservation Institute and published by Getty Publications. This book was released on 1991-02-28 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: On October 14-19, 1990, the 6th International Conference on the Conservation of Earthen Architecture was held in Las Cruces, New Mexico. Sponsored by the GCI, the Museum of New Mexico State Monuments, ICCROM, CRATerre-EAG, and the National Park Service, under the aegis of US/ICOMOS, the event was organized to promote the exchange of ideas, techniques, and research findings on the conservation of earthen architecture. Presentations at the conference covered a diversity of subjects, including the historic traditions of earthen architecture, conservation and restoration, site preservation, studies in consolidation and seismic mitigation, and examinations of moisture problems, clay chemistry, and microstructures. In discussions that focused on the future, the application of modern technologies and materials to site conservation was urged, as was using scientific knowledge of existing structures in the creation of new, low-cost, earthen architecture housing.

Download or read book Concrete International written by and published by . This book was released on 1999 with total page 1266 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Strategies for testing and assessment of concrete structures guidance report written by FIB – International Federation for Structural Concrete and published by FIB - International Federation for Structural Concrete. This book was released on 1998-05-01 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Mechanical Design Optimization Using Advanced Optimization Techniques written by R. Venkata Rao and published by Springer Science & Business Media. This book was released on 2012-01-14 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mechanical design includes an optimization process in which designers always consider objectives such as strength, deflection, weight, wear, corrosion, etc. depending on the requirements. However, design optimization for a complete mechanical assembly leads to a complicated objective function with a large number of design variables. It is a good practice to apply optimization techniques for individual components or intermediate assemblies than a complete assembly. Analytical or numerical methods for calculating the extreme values of a function may perform well in many practical cases, but may fail in more complex design situations. In real design problems, the number of design parameters can be very large and their influence on the value to be optimized (the goal function) can be very complicated, having nonlinear character. In these complex cases, advanced optimization algorithms offer solutions to the problems, because they find a solution near to the global optimum within reasonable time and computational costs. Mechanical Design Optimization Using Advanced Optimization Techniques presents a comprehensive review on latest research and development trends for design optimization of mechanical elements and devices. Using examples of various mechanical elements and devices, the possibilities for design optimization with advanced optimization techniques are demonstrated. Basic and advanced concepts of traditional and advanced optimization techniques are presented, along with real case studies, results of applications of the proposed techniques, and the best optimization strategies to achieve best performance are highlighted. Furthermore, a novel advanced optimization method named teaching-learning-based optimization (TLBO) is presented in this book and this method shows better performance with less computational effort for the large scale problems. Mechanical Design Optimization Using Advanced Optimization Techniques is intended for designers, practitioners, managers, institutes involved in design related projects, applied research workers, academics, and graduate students in mechanical and industrial engineering and will be useful to the industrial product designers for realizing a product as it presents new models and optimization techniques to make tasks easier, logical, efficient and effective. .

Download or read book Optimization for Decision Making written by Víctor Yepes and published by . This book was released on 2020-10-08 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the current context of the electronic governance of society, both administrations and citizens are demanding greater participation of all the actors involved in the decision-making process relative to the governance of society. This book presents collective works published in the recent Special Issue (SI) entitled "Optimization for Decision Making". These works give an appropriate response to the new challenges raised, the decision-making process can be done by applying different methods and tools, as well as using different objectives. In real-life problems, the formulation of decision-making problems and application of optimization techniques to support decisions are particularly complex and a wide range of optimization techniques and methodologies are used to minimize risks, improve quality in making decisions, or, in general, to solve problems. In addition, a sensitivity or robustness analysis should be done to validate/analyze the influence of uncertainty regarding decision-making. This book brings together a collection of inter-/multi-disciplinary works applied to the optimization for decision making in a coherent manner.

Download or read book Model Code 2010 Final draft written by fib Fédération internationale du béton and published by fib Fédération internationale du béton. This book was released on 2012-01-01 with total page 357 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objectives of MC2010 are to (a) serve as a basis for future codes for concrete structures, and (b) present new developments with regard to concrete structures, structural materials and new ideas in order to achieve optimum behaviour. MC2010 includes the whole life cycle of a concrete structure, from design and construction to conservation (assessment, maintenance, strengthening) and dismantlement, in one code for buildings, bridges and other civil engineering structures. Design is largely based on performance requirements. The chapter on materials is extended with new types of concrete and reinforcement (such as fibres and non-metallic reinforcements). The fib Model Code 2010 also gives corresponding explanations in a separate column of the document. Additionally, MC2010 is supported by background documents that have already been (or will soon be) published in fib bulletins and journal articles. MC2010 is now the most comprehensive code on concrete structures, including their complete life cycle: conceptual design, dimensioning, construction, conservation and dismantlement.

Download or read book Tierra Vacante en Ciudades Latinoamericanas written by Nora Clichevsky and published by . This book was released on 2002 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Vacant urban land--the product of land market activity, the actions of private agents, and the policies of public agents--is an important challenge for policy makers. Vacant lots on the urban fringe and in central and interstitial areas have affected growth patterns in Latin America. Contributors to this book analyze the problems and opportunities related to vacant urban land in five cities: Buenos Aires, Argentina; Rio de Janeiro, Brazil; Quito, Ecuador; Lima, Perú; and San Salvador, El Salvador.

Download or read book Achievement of slenderness written by Félix Candela and published by Universidad Politecnica de Madrid. This book was released on 2010 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: El libro de Pepa Cassinello rinde homenaje a uno de los más relevantes protagonistas internacionales de la Aventura Laminar de la Arquitectura Moderna, venerado capítulo de la Historia de la Construcción en el siglo XX. Aglutina en sus páginas un variado y amplio análisis de su obra, a través de la visión de algunos de los más destacados profesionales internacionales (Manterola, Torroja, Aroca, Calavera, Billington, Schlaich, Oliva ...) de la arquitectura, la ingeniería y su enseñanza. Tres disciplinas que Félix Candela, constructor y maestro de "cascarones de hormigón armado", fundió en una sola con singular maestría. El libro pone de manifiesto el significado y la relevancia de su legado, pormenorizando los aspectos fundamentales de su obra: la forma resistente, la geometría de sus atractivas y desnudas formas, los sistemas de cálculo y procesos de construcción empleados, las características del hormigón armado en aquellos momentos, así como algunas vivencias y matices de la personalidad de Félix Candela.

Download or read book Measurement Instrumentation and Sensors Handbook Second Edition written by John G. Webster and published by CRC Press. This book was released on 2014-01-29 with total page 1641 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Second Edition of the bestselling Measurement, Instrumentation, and Sensors Handbook brings together all aspects of the design and implementation of measurement, instrumentation, and sensors. Reflecting the current state of the art, it describes the use of instruments and techniques for performing practical measurements in engineering, physics, chemistry, and the life sciences and discusses processing systems, automatic data acquisition, reduction and analysis, operation characteristics, accuracy, errors, calibrations, and the incorporation of standards for control purposes. Organized according to measurement problem, the Spatial, Mechanical, Thermal, and Radiation Measurement volume of the Second Edition: Contains contributions from field experts, new chapters, and updates to all 96 existing chapters Covers instrumentation and measurement concepts, spatial and mechanical variables, displacement, acoustics, flow and spot velocity, radiation, wireless sensors and instrumentation, and control and human factors A concise and useful reference for engineers, scientists, academic faculty, students, designers, managers, and industry professionals involved in instrumentation and measurement research and development, Measurement, Instrumentation, and Sensors Handbook, Second Edition: Spatial, Mechanical, Thermal, and Radiation Measurement provides readers with a greater understanding of advanced applications.

Download or read book Structural Reliability written by Jorge Eduardo Hurtado and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last decades have witnessed the development of methods for solving struc tural reliability problems, which emerged from the efforts of numerous re searchers all over the world. For the specific and most common problem of determining the probability of failure of a structural system in which the limit state function g( x) = 0 is only implicitly known, the proposed methods can be grouped into two main categories: • Methods based on the Taylor expansion of the performance function g(x) about the most likely failure point (the design point), which is determined in the solution process. These methods are known as FORM and SORM (First- and Second Order Reliability Methods, respectively). • Monte Carlo methods, which require repeated calls of the numerical (nor mally finite element) solver of the structural model using a random real ization of the basic variable set x each time. In the first category of methods only SORM can be considered of a wide applicability. However, it requires the knowledge of the first and second deriva tives of the performance function, whose calculation in several dimensions either implies a high computational effort when faced with finite difference techniques or special programs when using perturbation techniques, which nevertheless require the use of large matrices in their computations. In or der to simplify this task, use has been proposed of techniques that can be regarded as variants of the Response Surface Method.

Download or read book The RISC V Reader written by David A. Patterson and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Theory Driven Evaluations written by Huey T. Chen and published by SAGE Publications. This book was released on 1990-01-01 with total page 331 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the publication of Theory-Driven Evaluations, Huey-Tsyh Chen has given us an ambitious volume. . . . Indeed, it is the aspiration of this book to provide a conceptual framework that integrates the diverse approaches and paradigms of evaluation. For those of us accustomed to the rhetoric of the paradigm wars that have been raging in recent years, it is refreshing to find a text that works so assiduously at reconciliation. . . . There is much that is useful in Chen′s analysis. He gives us a full and thoughtful book that attempts no less than the construction of a conceptual framework for all of program evaluation. . . . It provides an impressive compendium of source material and references spanning not only evaluation, but related work in economics and public policy (this alone is worth the price of the book). . . . Chen′s Theory-Driven Evaluations provides a stimulating, even heroic attempt to bring some conceptual integration to a field that has been too long dominated by methodological paradigms and procedural particulars. --a prepublication review for Evaluation and Program Planning "Generous use of examples which are well selected and lucidly summarized." --Contemporary Sociology "Chen introduces a new, comprehensive framework for program evaluation that is designed to bridge the gap between method and theory-oriented perspectives. . . . For program planners, decision makers, scholars, and students, this volume clarifies, illuminates and provides unique insights into the conception, construction and implementation of a wide range of programs. . . . The research examples used in the discussion draw upon various areas, such as education, welfare, health, criminal justice, job training [and] family construction to attract a wider audience." --Journal of Applied Rehabilitation Counseling Program evaluation has traditionally emphasized the application of social science research methods in evaluation activities. However, there is a growing awareness that program theory is vital for broadening the scope and enhancing the usefulness of program evaluation. In Theory-Driven Evaluations, Huey-Tsyh Chen introduces a new, comprehensive framework for program evaluation that is designed to bridge the gap between the method- and theory-oriented perspectives. He provides an intensive discussion of the nature and functions of program theory, approaches to constructing program theories, and the integration of program theory with evaluation processes. Specific types of theory-driven evaluations, as well as principles and guidelines for application are developed for meeting different policy purposes. Application of systematic strategies is illustrated by concrete examples from a variety of evaluation studies in different fields. The presentation of this new perspective directly addresses the needs and concerns in both the professional and applied areas of program evaluation. For program planners, decisionmakers, scholars and students, this volume will clarify, illuminate, and provide unique insights into the conception, construction, and implementation of a wide range of programs.

Download or read book The Path Between the Seas written by David McCullough and published by Simon and Schuster. This book was released on 2001-10-27 with total page 868 pages. Available in PDF, EPUB and Kindle. Book excerpt: The National Book Award–winning epic chronicle of the creation of the Panama Canal, a first-rate drama of the bold and brilliant engineering feat that was filled with both tragedy and triumph, told by master historian David McCullough. From the Pulitzer Prize–winning author of Truman, here is the national bestselling epic chronicle of the creation of the Panama Canal. In The Path Between the Seas, acclaimed historian David McCullough delivers a first-rate drama of the sweeping human undertaking that led to the creation of this grand enterprise. The Path Between the Seas tells the story of the men and women who fought against all odds to fulfill the 400-year-old dream of constructing an aquatic passageway between the Atlantic and Pacific oceans. It is a story of astonishing engineering feats, tremendous medical accomplishments, political power plays, heroic successes, and tragic failures. Applying his remarkable gift for writing lucid, lively exposition, McCullough weaves the many strands of the momentous event into a comprehensive and captivating tale. Winner of the National Book Award for history, the Francis Parkman Prize, the Samuel Eliot Morison Award, and the Cornelius Ryan Award (for the best book of the year on international affairs), The Path Between the Seas is a must-read for anyone interested in American history, the history of technology, international intrigue, and human drama.

Download or read book Museums Ethics and Cultural Heritage written by ICOM and published by Routledge. This book was released on 2016-07-07 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume provides an unparalleled exploration of ethics and museum practice, considering the controversies and debates which surround key issues such as provenance, ownership, cultural identity, environmental sustainability and social engagement. Using a variety of case studies which reflect the internal realities and daily activities of museums as they address these issues, from exhibition content and museum research to education, accountability and new technologies, Museums, Ethics and Cultural Heritage enables a greater understanding of the role of museums as complex and multifaceted institutions of cultural production, identity-formation and heritage preservation. Benefitting from ICOM’s unique position in the museum world, this collection brings a global range of academics and professionals together to examine museums ethics from multiple perspectives. Providing a more complete picture of the diverse activities now carried out by museums, Museums, Ethics and Cultural Heritage will appeal to practitioners, academics and students alike.

Download or read book Water Reuse written by Metcalf & Eddy, Inc., an AECOM Company and published by McGraw Hill Professional. This book was released on 2007-02-05 with total page 1610 pages. Available in PDF, EPUB and Kindle. Book excerpt: An Integrated Approach to Managing the World's Water Resources Water Reuse: Issues, Technologies, and Applications equips water/wastewater students, engineers, scientists, and professionals with a definitive account of the latest water reclamation, recycling, and reuse theory and practice. This landmark textbook presents an integrated approach to all aspects of water reuse _ from public health protection to water quality criteria and regulations to advanced technology to implementation issues. Filled with over 500 detailed illustrations and photographs, Water Reuse: Issues, Technology, and Applications features: In-depth coverage of cutting-edge water reclamation and reuse applications Current issues and developments in public health and environmental protection criteria, regulations, and risk management Review of current advanced treatment technologies, new developments, and practices Special emphasis on process reliability and multiple barrier concepts approach Consideration of satellite and decentralized water reuse facilities Consideration of planning and public participation of water reuse Inside This Landmark Water/Wastewater Management Tool • Water Reuse: An Introduction • Health and Environmental Concerns in Water Reuse • Technologies and Systems for Water Reclamation and Reuse • Water Reuse Applications • Implementing Water Reuse

Download or read book LEV written by and published by . This book was released on 1999 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt: